Develop Bugs

Wanted: Hermes Webcam App

Could anyone please be so kind to point me in the direction of an app to make the Hermes camera into a webcam, i have tried a couple of time limited shareware apps, one worked and one didnt.
Does anyone know of a freeware app, or something along those lines?
Muchly appreciated!

http://www.ateksoft.com/
this isnt freeware... but if you know what you are looking for...

shogunmark said:
http://www.ateksoft.com/
this isnt freeware... but if you know what you are looking for...
Click to expand...
Click to collapse
will it work on WM 6.0 BLACK 3.O ???

ngo8 said:
will it work on WM 6.0 BLACK 3.O ???
Click to expand...
Click to collapse
yes, works like a charm

ngo8 said:
will it work on WM 6.0 BLACK 3.O ???
Click to expand...
Click to collapse
yes it does. running right now
Its a bit fiddly to setup and you need a PC connection via Activesync
Also, might want to try microsoft portrait http://research.microsoft.com/mcom/portrait/
some have reported problems though with WM6 based ROMS

AirwolfUK said:
yes it does. running right now
Its a bit fiddly to setup and you need a PC connection via Activesync
Also, might want to try microsoft portrait http://research.microsoft.com/mcom/portrait/
some have reported problems though with WM6 based ROMS
Click to expand...
Click to collapse
i have played with portrait on wm5, but i dont think it will allow you to use the phone as a webcam on your pc, but does work with msn on your device...

M$ Protrait Does not work on WM6.

AirwolfUK said:
Its a bit fiddly to setup and you need a PC connection via Activesync
Click to expand...
Click to collapse
Do you? You didn't on WM5, as I had it running happily over wifi.

shogunmark said:
http://www.ateksoft.com/
this isnt freeware... but if you know what you are looking for...
Click to expand...
Click to collapse
Thanks. That software looks good. One thing - the camera appears sideways - is there some way to make the image appear the same way up and the camera?

bobbyelliott said:
Thanks. That software looks good. One thing - the camera appears sideways - is there some way to make the image appear the same way up and the camera?
Click to expand...
Click to collapse
Select the Rotation angle in the Setting menu.

elklau said:
Select the Rotation angle in the Setting menu.
Click to expand...
Click to collapse
Don't have that setting. Only General, Front Sensor, Network. Running WebCamera Plus v1.05. Is there a later version?

bobbyelliott said:
Don't have that setting. Only General, Front Sensor, Network. Running WebCamera Plus v1.05. Is there a later version?
Click to expand...
Click to collapse
Its accessible on the PC application.

Okay, so this is the problem now. I finally found the program and installed it. Now i Can't seem to connect online via USB. Is there a problem with the program? I uninstalled the program and still can't connect online via USB. Any leads? I was able to connect only just before installing the program.

bernardryan said:
Okay, so this is the problem now. I finally found the program and installed it. Now i Can't seem to connect online via USB. Is there a problem with the program? I uninstalled the program and still can't connect online via USB. Any leads? I was able to connect only just before installing the program.
Click to expand...
Click to collapse
I can't reproduce your problem. My device networks fine via USB after using the webcam software.
I have activesync installed, but don't have it set up with a partnership for my device (using oggsync instead). Does your activesync sync with your device?
Anything unusual in your network connections settings?
Have you tried a system restore to an earlier point?
HTH.

i had purchased the software and e mailed the company for unlock code.
Given my device id to them but the cab doesnt work.
i had changed my rom with black 2.0 and my radio is 1.4
any idea what could be wrong?

blurnard said:
i had purchased the software and e mailed the company for unlock code.
Given my device id to them but the cab doesnt work.
i had changed my rom with black 2.0 and my radio is 1.4
any idea what could be wrong?
Click to expand...
Click to collapse
Do you mean that you changed the rom after emailing your device ID? If so, it could well be that your device ID has changed - have a look in your system info screen (as directed by ateksoft) to see if it matches what you sent them.
I had similar issue after changing roms - they sent me a new code.

slow framerate...
Is anyone else experiencing slow framrates???? I'm getting 7-8 fps at most ... ... definitely not liking the webcam at the moment... LOL
pity it doesn't use the mic on the phone

marscandybars said:
Is anyone else experiencing slow framrates???? I'm getting 7-8 fps at most ... ... definitely not liking the webcam at the moment... LOL
pity it doesn't use the mic on the phone
Click to expand...
Click to collapse
Hmm, I'm only getting around 3.5 fps. Anyone getting anything better?

Hyperbaric said:
Hmm, I'm only getting around 3.5 fps. Anyone getting anything better?
Click to expand...
Click to collapse
The smaller the resolution that faster you will get... but by fast ... i mean 7 fps ... LOL

The framerate depends on the resolution and quality settings you are running at, if you turn the quality and resolution down you can get a good frame rate.
I run the resoultion at 640 x 480 and quality 70/E and the frame rate is fine.

HELP! Clock problem in Gen.Y D2 R2-Rev.Y

I am using Gen.Y D2 R2-Rev.Y and my clock freezes and doesnt move and stays on the same time,also when i look at my local time in settings it is telling me the right time. What can I do to fix this?

dthomas said:
I am using Gen.Y D2 R2-Rev.Y and my clock freezes and doesnt move and stays on the same time,also when i look at my local time in settings it is telling me the right time. What can I do to fix this?
Click to expand...
Click to collapse
In the own thread of the ROM post #2 you can find solution:
My clock stopped working / changed to wrong timezone? How can i fix this?
Go to Settings > Personal > Phone
Then go to the Timezone tab and uncheck "automatic change timezone"

I tried that but it still didnt work.

dthomas said:
I tried that but it still didnt work.
Click to expand...
Click to collapse
i have the same problem too, so that I moved back to my favorite: aFast ROM

farfanet said:
In the own thread of the ROM post #2 you can find solution:
My clock stopped working / changed to wrong timezone? How can i fix this?
Go to Settings > Personal > Phone
Then go to the Timezone tab and uncheck "automatic change timezone"
Click to expand...
Click to collapse
Hi there,
i had the same problem here, the clock stopped to update in TF3D. (The clock itself works fine.. ) A softreset did not helped, but 2x runs of "cleanRAM" solved the problem so far.
Another problem i noticed is, after running Klaxxon sometimes the whole phone will loose 95% of its cpu-performance. Softreset will fix this.
Next problem belongs to the camera. Sometimes camera go into a "save-loop" when pictures got saved to internal flash (not 4GB device)
So long, Christian

Guys, Gen.Y D2 R2-Rev.Y has its own thread... there´s no reason creating something else just to solve your problems...
So, the clock problems have been reported there several times, and you may find that one of those is the issue:
- usage with some alarm utility (such as pocketalarm, klaxxon, etc)
- usage with S2u2: I don´t have this problem myself but it´s been reported, so, try to avoid it
- bad flash: read the MTTY thread and try to flash your device again, using that process.
If the problem persists... well, you´re free to get back to whichever ROM you find more suitable, since it´s been reported as well in the thread that some devices will keep - still - freezing the clock.
Good luck. And I guess, moderator, you can close this thread.

Wrong MSID
I have had the same problem, after I discovered that MSID for portuguese cities were wrong, afterwards no more Clock hangs, please see thread:
http://forum.xda-developers.com/showpost.php?p=4843166&postcount=4755

dthomas said:
I am using Gen.Y D2 R2-Rev.Y and my clock freezes and doesnt move and stays on the same time,also when i look at my local time in settings it is telling me the right time. What can I do to fix this?
Click to expand...
Click to collapse
Hi,
You go in "Settings"==>"Today" disable TF3D click ok, and then RE-Enable TF3D...
This is a bug Manila 2.1

I had the same problem but now its solved.
Go to all settings -> system ->Clock and Alarms.
Change the timezone to any other time zone.
Then, go back to the home screen clock. click on it.
From World Clock remove the original clock.
Go back to clock and alarms-
Now put the your timezone.
I think for some users, it does work properly for city timezone'

i had the same problem, disabling and re-enabling TF3D2 is indeed a solution. The problem is caused by the service autotimeupdate.exe.
I removed the startup key in the registry, and now the clock works perfectly without disabling TF3D2 or other modifications!

faraaz said:
i had the same problem, disabling and re-enabling TF3D2 is indeed a solution. The problem is caused by the service autotimeupdate.exe.
I removed the startup key in the registry, and now the clock works perfectly without disabling TF3D2 or other modifications!
Click to expand...
Click to collapse
And where can we find this key because this bug has been bugging me for a long time!!

prelaki said:
And where can we find this key because this bug has been bugging me for a long time!!
Click to expand...
Click to collapse
u can delete it from:
HKLM\init\
hope it helps u !

SOLUTION
I had been petrified with the clock hanging issue for a long time, but these simple steps seemed to have solved my prob,
1. Diable TF3D from Today.
2. Restart would be preferable.
3. Diable automatic time zone change in settings>phone
4. Again a restart would be preferred.
5. Adjust time in settings>clock if required.
6. Start TF3D from today.
Try it out, works well for me

faraaz said:
i had the same problem, disabling and re-enabling TF3D2 is indeed a solution. The problem is caused by the service autotimeupdate.exe.
I removed the startup key in the registry, and now the clock works perfectly without disabling TF3D2 or other modifications!
Click to expand...
Click to collapse
Doesn't work for me
Will try other options later (already disables automatic time zone adjustment, but not while disabling manilla first, although it is a long shot)

prelaki said:
Doesn't work for me
Will try other options later (already disables automatic time zone adjustment, but not while disabling manilla first, although it is a long shot)
Click to expand...
Click to collapse
try it, without restarting. 1st enable auto adjust ...

lsgnobody said:
Guys, Gen.Y D2 R2-Rev.Y has its own thread... there´s no reason creating something else just to solve your problems...
So, the clock problems have been reported there several times, and you may find that one of those is the issue:
- usage with some alarm utility (such as pocketalarm, klaxxon, etc)
- usage with S2u2: I don´t have this problem myself but it´s been reported, so, try to avoid it
- bad flash: read the MTTY thread and try to flash your device again, using that process.
If the problem persists... well, you´re free to get back to whichever ROM you find more suitable, since it´s been reported as well in the thread that some devices will keep - still - freezing the clock.
Good luck. And I guess, moderator, you can close this thread.
Click to expand...
Click to collapse
I used to have the same problem with pocketshield installed, it was because I have a pin set for my sim when the phone starts up, and if pocketshield started to load before touch flo it caused the clock locking up problems, so as soon as the pin screen comes up insert pin quick and press enter then all is fine, or remove the sim pin.

fazalali110 said:
I had been petrified with the clock hanging issue for a long time, but these simple steps seemed to have solved my prob,
1. Diable TF3D from Today.
2. Restart would be preferable.
3. Diable automatic time zone change in settings>phone
4. Again a restart would be preferred.
5. Adjust time in settings>clock if required.
6. Start TF3D from today.
Try it out, works well for me
Click to expand...
Click to collapse
Worked fine for me
Noted that not only Gen.Y ROM got this problem, others may got this and should do the same way

fazalali110 said:
I had been petrified with the clock hanging issue for a long time, but these simple steps seemed to have solved my prob,
1. Diable TF3D from Today.
2. Restart would be preferable.
3. Diable automatic time zone change in settings>phone
4. Again a restart would be preferred.
5. Adjust time in settings>clock if required.
6. Start TF3D from today.
Try it out, works well for me
Click to expand...
Click to collapse
Wow man and for me, thank you! And without the need to put the stylus in the registry!
I was about to change my ROM for this bug

You can also re-install the disableclockflip.cab it seems work too..

[i780] Cannot use touchpad for camera - SOLVED

Hi friends,
I recently installed Magikb Lite and chgfingermouse on my i780. Since then, I cannot use any harware keys with the camera. Previously I was able to zoom or take picture using the touchpad, but now only the touchscreen works.No hardware buttons work. To close the camera I need to put the phone on standby (single press on power button) and switch it on again. Then the camera closes. I uninstalled both softwares but still not work.
Is my problem linked with both softwares or it's something else? Do I need to remap the hardware keys?
Help needed guys!

Easiest way to fix this - is to backup all data and make a HARD-RESET.
As per ironeagle instructions:
(Remove Battery|Put back Battery|Press Green Phone button + Red Phone button, Then press Power button| U see Menu | Press space bar to hard reset)
Click to expand...
Click to collapse

Thnx for your reply .
It is an easiest and drastic way to solve the issue...BUT.....
I configured so many applications on my i780 (tomtom, today, etc) that I don't really want to hard reset and loose all my settings. That's why I am desperately looking for an alternate solution.

Then You will need to go through registry and look for values what might be changed by Magikb Lite / Chgfingermouse.

Thnx a lot Spiaatie. Will try this

Oh my God. It's working!!!!!
I installed hookmanager from magikb website (http://www.mobiion.com/downloads.html#hookmgr). Now everything's working fine.
Special thanks to Hong Jia from http://www.mobinauts.com who gave me the hint.

Problem with TP2 camera

I recently upgraded to a Touch Pro 2 from a Mogul, massive improvement (other than the lack of hardware keys). So I was a little worried when first using the camera, but the interface quickly grew on me. After installing everything I had on the Mogul, and a few other things that weren't previously supported, I went to snap a quick picture. But for some reason I now have to press and HOLD the shutter button for about 2 or 3 seconds while it auto-focuses then finally takes the picture. For the last week or two (since I've had the phone) I just tapped the button and it focused and took the picture, and was a lot quicker.
I've gone through all of the new cabs I've installed and looked for changes to the camera's registry settings, but found nothing (other than the enabling of the extra modes).
I've also tried changing the Key Delay settings in Advanced Config. Normally I find solutions to any problems I encounter by searching the xda forums, but this time all I'm coming up with is TP2 camera reviews, and stuff about the TP Shoot Options (which are related to the TP's hw button, I'm guessing?).
It's not a huge problem, I mean everything still works as it should. It's just kind of annoying having to hold the button and wait. Any help with this would be greatly appreciated.
Also, pressing the Enter key on the hardware keyboard still has the desired effect. It's just something with the on screen shutter button.

dagoob said:
I recently upgraded to a Touch Pro 2 from a Mogul, massive improvement (other than the lack of hardware keys). So I was a little worried when first using the camera, but the interface quickly grew on me. After installing everything I had on the Mogul, and a few other things that weren't previously supported, I went to snap a quick picture. But for some reason I now have to press and HOLD the shutter button for about 2 or 3 seconds while it auto-focuses then finally takes the picture. For the last week or two (since I've had the phone) I just tapped the button and it focused and took the picture, and was a lot quicker.
I've gone through all of the new cabs I've installed and looked for changes to the camera's registry settings, but found nothing (other than the enabling of the extra modes).
I've also tried changing the Key Delay settings in Advanced Config. Normally I find solutions to any problems I encounter by searching the xda forums, but this time all I'm coming up with is TP2 camera reviews, and stuff about the TP Shoot Options (which are related to the TP's hw button, I'm guessing?).
It's not a huge problem, I mean everything still works as it should. It's just kind of annoying having to hold the button and wait. Any help with this would be greatly appreciated.
Also, pressing the Enter key on the hardware keyboard still has the desired effect. It's just something with the on screen shutter button.
Click to expand...
Click to collapse
I too have encountered this problem and can't figure out what is causing it. Also, I have noticed that for my video recording, it is stuck on the lowest resolution of S (128x96) in mpeg4 mode. When I first got the phone, I recall setting it to best resolution, forgot which one that was, but I can't even tap on the resolution to change it from small, just makes error clicks. Does anyone know what's wrong or how to fix this? (Short of a hard reset of course)

I am guessing you guys are using stock roms? I would highly suggest flashing a custom rom, they are in my experience 100x better than stock roms. If you dont want to go that route, you can search the forums for the Advanced Configurations tool, download it and install. It has options for your camera settings, among many other very useful settings. I believe the camera has a delay by default, which can be disabled in the Advanced config menu. I have also found that disabling the shutter sound and setting the flicker adjustment to 50 hz seems to give better/faster camera performance. Also check in TP2/Tilt2 Genereal Discussion / Cabs, Tips, and Tweaks thread, you can enable more camera modes and video modes by doing some pretty easy registry tweaks

Yeah I've had custom roms on all of my previous phones, but I've had no problems with the stock one so far (contrary to the previous ones, which is why I flashed). As per my original post, the settings in Advanced Config do not relate to the problem I (and apparently others) am experiencing. I would say this is the problem that would make me flash a custom rom, but the problem didn't start until a few weeks after using the phone. I totally agree with you on the flicker and sound settings though.
The problem isn't really a "delay", its a matter of 'Press' vs 'Press & Hold'. It really isn't a problem though. In fact, it actually keeps me from accidentally taking pictures. One thing I did do though is set my Back key to Enter (which still works right). So now I have a hardware shutter button.

Xeion said:
I too have encountered this problem and can't figure out what is causing it. Also, I have noticed that for my video recording, it is stuck on the lowest resolution of S (128x96) in mpeg4 mode. When I first got the phone, I recall setting it to best resolution, forgot which one that was, but I can't even tap on the resolution to change it from small, just makes error clicks. Does anyone know what's wrong or how to fix this? (Short of a hard reset of course)
Click to expand...
Click to collapse
Try BsB Tweaks and turn on hidden camera modes. Should open up the number of video options.

Toleraen said:
Try BsB Tweaks and turn on hidden camera modes. Should open up the number of video options.
Click to expand...
Click to collapse
Toleraen, do you know if BsB tweaks work on a sense 2.1 rom?

sirphunkee said:
Toleraen, do you know if BsB tweaks work on a sense 2.1 rom?
Click to expand...
Click to collapse
I'm pretty sure I've seen it in Energy's Sense 2.1 ROMs.

Toleraen said:
I'm pretty sure I've seen it in Energy's Sense 2.1 ROMs.
Click to expand...
Click to collapse
Sweet, thank you my friend

i also have the problem of the video resolution only S (128x96), i install bsb tweks (2 times), turn on all the video related settings (4 or 5 times on and off), soft reset (4 or 5 times) and nothing, please help, this is frustrating

radioman38 said:
i also have the problem of the video resolution only S (128x96), i install bsb tweks (2 times), turn on all the video related settings (4 or 5 times on and off), soft reset (4 or 5 times) and nothing, please help, this is frustrating
Click to expand...
Click to collapse
radioman, what ROM are you using? Once you have the options switched on in BsB tweaks, the additional resolutions should become selectable in the options menu in the vid camera (under the "advanced" button).

sirphunkee im using the factory original att rom, i turn on the bsb tweaks video options, go to the video camara, click advance and the resolution tap is not working, can not select nothing, its gray out, make a sound everytime i touch it

radioman38 said:
sirphunkee im using the factory original att rom, i turn on the bsb tweaks video options, go to the video camara, click advance and the resolution tap is not working, can not select nothing, its gray out, make a sound everytime i touch it
Click to expand...
Click to collapse
Understood, thank you. Are you able to click/select the "Capture Format" options in that same list in "Advanced" vid settings....or is it greyed out/locked as well?
EDIT: I just saw your post in the other thread, I'll throw BsB back on my phone in a few and then list the exact steps/options I used.

Ok radioman, here's what I did...
In BsB tweaks, I switched on all the following options:
-Hidden Camera Modes (probably only affects the still camera, but it's one of the ones I turned on when the extra video options appeared, so you might want to try it anyway)
-Video Formats
-Camera Superfine
-Video BitRate
Once I switched those all on, I just went into the video camera settings, clicked the "advanced" button, and then I could click on and change both the "capture format" and "resolution" selections. I believe that the 640x480 resolution is only available in the MPEG4, Motion JPEG, and 3GPP2 formats.

I tried this with BsB was only able to get 640x480 in 3GPP2 on my tilt 2.

ok,sirphunkee thanks for your time, but the first time i instaled bsb tweaks i did everything like you said but nothing, i can change and choose all the capture formats, H.264, H.263, 3GPP3, MPEG4 and Motion JPEG, but i can't change the resolution in any format, the only option is S (128 x 96), i am kind of desperate!

can anyone help here?? the videos are so small!!!

GBX0A_Full_Bundle_12.2.2011 24H Battery life!!

Just get better keyboard, Battery life 24H!!
http://files.xdandroid.com/

Hi
It's very fine and usable but i can't find the live wallpaper function.
Do you know what can i do ???

PANCIO said:
Hi
It's very fine and usable but i can't find the live wallpaper function.
Do you know what can i do ???
Click to expand...
Click to collapse
It has no Live Wallpaper support because it's still alpha release.
And this feature has lower priority than other stuff that have to be fixed.

PANCIO said:
Hi
It's very fine and usable but i can't find the live wallpaper function.
Do you know what can i do ???
Click to expand...
Click to collapse
It won't have live wallpaper anytime soon. They are not worth fixing because they drain battery crazy fast and are darn slow on our devices. I think they were disabled on purpose in FroYo.

hi, can you tell us, what is working and what no in this build?
I refer about the bluetooth, camera, wifi...
Thanks

dedalum said:
hi, can you tell us, what is working and what no in this build?
I refer about the bluetooth, camera, wifi...
Thanks
Click to expand...
Click to collapse
Hi, dedalum!
On Blackstone BT does not work, wifi and data works, camera.... I'll test it! (I think it wont work) --Tested, but the news are bad!
The old kernels does not work with Gingerbread, so camera does not work, yet!
I tried two different kernels, for the camera testing and for the anti-audio stuttering MOD, in the both cases it cant reach the homescreen.

As nasko_spasko mentioned, camera seems out of reach for the moment...
I also asked in VirusCrazy's camera testing thread, and he also gives Gingerbread "low chance", something for the future...
But I should add that there is (probably more than one) kernel out here that fixes audio stuttering, I'm using Gingerbread with a modified 1253 kernel from http://forum.xda-developers.com/showpost.php?p=11169582&postcount=76
Audio and Wifi great, battery life ~ 20-30 hours (using periodic data for ClockSynch and some weather sync, but nothing else)
Cheers,
Robbert
nasko_spasko said:
Hi, dedalum!
On Blackstone BT does not work, wifi and data works, camera.... I'll test it! (I think it wont work) --Tested, but the news are bad!
The old kernels does not work with Gingerbread, so camera does not work, yet!
I tried two different kernels, for the camera testing and for the anti-audio stuttering MOD, in the both cases it cant reach the homescreen.
Click to expand...
Click to collapse

nasko_spasko said:
Hi, dedalum!
On Blackstone BT does not work, wifi and data works, camera.... I'll test it! (I think it wont work) --Tested, but the news are bad!
The old kernels does not work with Gingerbread, so camera does not work, yet!
I tried two different kernels, for the camera testing and for the anti-audio stuttering MOD, in the both cases it cant reach the homescreen.
Click to expand...
Click to collapse
The audio is the most important issue for me.
I have GBX0A running with 1255 kernel. It's the only one that doesn't give me audio-stuttering since Gingerbread won't boot with the 1498 kernel.
The latest kernels 1260/1262 both work but give audio-stutter.
Only thing i'd like is a new rootfs with keymapping for Blackstone like in the rootfs from 2011-01-31.

very nice build. i have one question though... why is the clock lazy?
it is like the android minute is a second short. is there a fix for this?

had the same problem. search market for time sync apps..

5zeci said:
very nice build. i have one question though... why is the clock lazy?
it is like the android minute is a second short. is there a fix for this?
Click to expand...
Click to collapse
Do as d.weiss says. Clocksync works perfectly.

5zeci said:
very nice build. i have one question though... why is the clock lazy?
it is like the android minute is a second short. is there a fix for this?
Click to expand...
Click to collapse
just get clocksync from market

Am i the only one having trouble with the keyboard not showing up properly? it's only about 20px high and it's impossible to see there are different keys but if you drag your finger around the popup with the different characters show up so it works but seem to be scaled incorrectly...
I tried long pressing on a text field to switch keyboard and the chineese keyboard works just fine but that doesn't really help me...

zagitta said:
Am i the only one having trouble with the keyboard not showing up properly? it's only about 20px high and it's impossible to see there are different keys but if you drag your finger around the popup with the different characters show up so it works but seem to be scaled incorrectly...
I tried long pressing on a text field to switch keyboard and the chineese keyboard works just fine but that doesn't really help me...
Click to expand...
Click to collapse
same problem.
and i had during the initial boot that the alignmet squares disapeared (the 4/5 blocks to align the touch screen)

zagitta said:
Am i the only one having trouble with the keyboard not showing up properly? it's only about 20px high...
Click to expand...
Click to collapse
SmokeMasta said:
same problem.
and i had during the initial boot that the alignmet squares disapeared (the 4/5 blocks to align the touch screen)
Click to expand...
Click to collapse
Keyboard is a known issue.
Recommendation: get Thumb keyboard from Market. It's free and has different layouts and looks.
Fix for alignment squares: use old ts-calibration file from another build, or use the one attached below. Just remove the extension and put it in the same folder as haret and startup.

hrk7474 said:
Keyboard is a known issue.
Recommendation: get Thumb keyboard from Market. It's free and has different layouts and looks.
Fix for alignment squares: use old ts-calibration file from another build, or use the one attached below. Just remove the extension and put it in the same folder as haret and startup.
Click to expand...
Click to collapse
How exactly am i supposed to get on the market in the first place when i can't write my email? I've put the apk onto the sd card but there's not even a file manager included so that's not possible either :<

zagitta said:
How exactly am i supposed to get on the market in the first place when i can't write my email? I've put the apk onto the sd card but there's not even a file manager included so that's not possible either :<
Click to expand...
Click to collapse
Use build in Japan IME. It has Latin characters on the numeric keyboard (like in non touchscreen phones). Should be enough to log into market and download gingerbread keyboard.

zagitta said:
How exactly am i supposed to get on the market in the first place when i can't write my email? I've put the apk onto the sd card but there's not even a file manager included so that's not possible either :<
Click to expand...
Click to collapse
Or just put the apk inside the AndroidApps folder (it's inside the andboot one). It will auto-install at boot.
I like the app "Gingerbread keyboard" though. I use it in froyo too.

g3rm0 said:
Use build in Japan IME.
Click to expand...
Click to collapse
Thanks so much for that, I owe you a huge beer!

Yes this version is working like a charm !
Its very fast and stable