I downloaded Rhodium-HardSPL_V2_00R3_185HSPL.zip and unzipped but i cant perform hard spl using this.. it says error[246] device not responding.. it is not allowing me to perform both the automatic and manual hspl.. even i hard reset my mobile before performing HSPL.. I am in UK using Tmobile Touch Pro2 ROM version 1.86.401.0 (67102)WWE; Radio Version 4.49.25.17.. Please anyone help me to perform HSPL and install the Cooked rom...
Edit/Delete Message
Is your phone service on? It can't perform HSPL if it isn't on.
You might want to check that your phone is synced to Windows on your computer.
Vista needs Windows Mobile Device Center installed to sync I believe.
Had lots of issues doing the same thing to my Tilt2.
Here is what I did. I deleted any partnership in Activesync (probably did nothing but did not hurt)
downloaded enablerapinew.cab and installed it on memory card
did a hard Reset (actually 2 but hey who knows)
Moved enablerapinew to phone, removed SD card and ran enablerapinew.cab let phone sync with whatever name it wanted.
Once synced I ran the installer in automatic and it worked.
I spent 4 days trying everything so there is hope.
Thank u INRBigness i removed my Memory card and it works... Thank u very much
flashing touch pro 2
i have tried every trick in the book to get the hard spl on my touch pro2 from sprint. i am ready to give up and just suffer with the stock rom. please help!
As the OP's device is in this shape in his other thread here it's no wonder the HardSPL is not working.
Related
I figured this out by accident..
I upgraded to windows mobile 2003 SE 2.06 but after I found out that half of the programs (MMS composer, cammera, etc..) dont work, due to incompatibility (error message says they are incompatible) I wanted to downgrade.
I ran the same ROM instalation (2003 SE 2.06) and waited for it to erase my ROM, then I took the phone out of cradle. I was dead at that point. I removed main battery, put it back in. Reboot the phone in bootloader mode (hold down D pad in centre position, then power button and soft reset - all at the same time). Then I put the phone back into the cradle and ran the ROM instalation of my choice. No more problems.
Well, I think using SD card method may be saver.
However, I forgot how to do this.
Cheers,
Darko3 said:
I figured this out by accident..
I upgraded to windows mobile 2003 SE 2.06 but after I found out that half of the programs (MMS composer, cammera, etc..) dont work, due to incompatibility (error message says they are incompatible) I wanted to downgrade.
Click to expand...
Click to collapse
Same thing, I badly need to downgrade to 1.72 or 1.66. I tried it, it did not work. I was was adviced that there is a 1.66 SD version which is safe and possible to apply, any advice where can I find it???
Bty, MTUX 1.4 Ring tone, and other software runs very slow and creats porblems with 2.06!! Beside 2.06 hard reset by itself on weekly basis!!!
Any advice where to find 1.66 SD version?
HELP HELP HELP....
hello people...
i desperately need to downgrade from wm2003se to wm2003. please tell me where can i find my original rom of wm2003. thanx you.
by the way... my ppc is an O2 Xda II.
please do help somebody... its kinda urgent...
i cant get programs running in BA, like wisbar, YM Mobile, ilauncher, pls help, but the BA works fine in calling and texting, my last resort is HARD RESET again, am tired......pls help, tnx!!!!
Hiya, a few quick questions if I may:
1) How are you trying to install these programs?
2) Have you managed to get *any* third-party software running?
3) Are you still running WM2003?
4) Have you performed any rom upgrades?
That'll do for now
i install it in a normal way, via activesync, am currently running WM2005, before when i was running 2003 all seemed 2 be normal, any suggestions? tnx...............
another question how do u use the program system memory? cause when i install all the programs use storage memory not program memory, am loosing space, heheheh
AH (steps away) - you're running WM05... ok. AFAIK from skimming some of the posts here, most software you're used to running on 2003 won't work on '05. Think back to win 3.11 - win95 and I reckon it's a similar thing.
I decided not to go for WM'05 as there's nothing I wanted that it offered apart from WMP10 which is in the latest 2003 roms anyway. Plus, I have a whole batch of 2003 software which I like to run!
'Fraid I can't help mate, except to say "Run, run like a frightened rabbit!"
I am very frustrated with my HTC Touch Diamond as I am trying to update it to Hard-SPL yet when it's plugged into the computer (with active sync running) and I follow all the directions very closely, I go to update the phone and it doesn't show any activity on the phone, the progress bar on my computer screen shows 0%, then it eventually pops up with a message saying Error 202. This is a connection error, yet I am positive that the phone is plugged into the computer. Please HELP!
Hello, Did you run SSPL first? You can only flash hard spl when sspl is active it is a black screen.
I have a Telus HTC Touch, does that make a difference on whether or not this will work?
your diamond is cdma. these only work with gsm.
so by the word 'these' in the last post, you mean that the Rom updates won't work?
I don't think SPL has to do anything with CDMA or GSM. Some ROMs have an option in the phone settings to choose either GSM or CDMA.
ryanseyz: Make sure you have a factory ROM ready before trying the cooked ones here so when things happen unexpectedly, you always have a choice. Next, there are 2 versions of SPL here, try both. Make sure you install EnableRAPI.cab and CertSPCS.cab installed on your device.
Regards,
Carty..
anyone has a solution for this yet? I'm experiancing the same problem with my Touch Pro, can't seem to get it to work.
I installed both files like mentioned above but still give error 202.
The funny thing is it does recognize the current version of my rom (stock).
Greetings,
Phyrax
Phyrax said:
anyone has a solution for this yet? I'm experiancing the same problem with my Touch Pro, can't seem to get it to work.
I installed both files like mentioned above but still give error 202.
The funny thing is it does recognize the current version of my rom (stock).
Greetings,
Phyrax
Click to expand...
Click to collapse
The same here with my mda compact iv. I've tried all versions of the RUU of hardSPL with no result (error 202). When I update the official rom of t-mobile (1.93) with the RUU, there isn't a connection problem and everything goes well.
My device is not simlocked, but i suspect it has a security lock or something like that.
Hello, I have the same problem with a HTC Diamond : error 202 and everything is connected, hotsynched, etc.
Did anyone find a solution ?
anyone??? im having the same problem..
I'm having this issue as well, any solutions?
The same problem
I have a HTC Touch Diamond and have the same problem.
I don't know what i have to do to fix this problem.
I have got the same problem. Add I have problem with align screen, so I can't run any cab on device. Looking for any advice..
i have a htc mda basic ....same problem...any solution...please help....
I'm not sure, but if i'm not wrong i had the same 202 error code last time i tried to reflash original (stock) spl, for warranty reasons. I solved the problem flashing stock spl (from hspl 1.93 olinex) with the phone conencted to activesync: run sspl-manual.exe from the device (previously copy sspl-manual on the device): the phone will go to black screen; than run the normal romupdateutility.exe from pc, and follow ordinary instructions.
Hope this could help.
Dudubai said:
I'm not sure, but if i'm not wrong i had the same 202 error code last time i tried to reflash original (stock) spl, for warranty reasons. I solved the problem flashing stock spl (from hspl 1.93 olinex) with the phone conencted to activesync: run sspl-manual.exe from the device (previously copy sspl-manual on the device): the phone will go to black screen; than run the normal romupdateutility.exe from pc, and follow ordinary instructions.
Hope this could help.
Click to expand...
Click to collapse
Thank's..., this solution work for me...!!!
For me too !!! working now !
Thanks it work!
Thanks !!! It works !!!
hi,
I downloaded BsB 6.5.1 rom for my htc diamond, but that halts the phone again and again. Can any body please give me the links for stable and fast windows mobile 6.5 for my htc diamond.
Regards.
I have used BSB 6.5S ROM for about a month now. It is the best ROM so far for me. Stable, reliable and fast. I haven't altered much to the ROM apart from adding CHero clock and a bit of theme change here and there. I suggest used the ROM as it is for a while first. Check that it is OK before adding your own apps or so one and a time so that you can troubleshoot problem is due to the ROM or your own app.
Please help
My mobile device is in a loop now. Windows does not load. I have done hard reset many times, doesn't load windows. I have done soft reset many times as well. Basically, I can't copy rom onto internal storage, as active sync is not connecting.
technoware said:
My mobile device is in a loop now. Windows does not load. I have done hard reset many times, doesn't load windows. I have done soft reset many times as well. Basically, I can't copy rom onto internal storage, as active sync is not connecting.
Click to expand...
Click to collapse
Probably another MTTY case... By the way this question should be opened in BsB ROM thread. Seach for MTTY in there.
hello everyone..
this morning I was intended to revert my kaiser back to WM 6.1,
I followed the instruction to put the ROM to my SD card along with KAISDIAG.nbh.
but maybe I chose a wrong rom, as the process goes, I just realize that the process was deleting my hard SPL..
now the text my 3 color display only says "SPL-1.56.0000"
but the android is still working....
so now my phone run on android without hard SPL...
could anyone help me? is it possible to install a hard SPL from android?
flashing from SD card doesn't works because I don't have any hard SPL installed..
There is no way at present to install hardspl from android, since we cannot run jumpspl, however you should still be able to flash a stock 6.1 rom using usb method.
Sent from my HTC Dream using Tapatalk
I have tried, but the process always failed with connection notification.It says that update utility cannot connect with my pda phone.
Well the problem is, flashing with usb method needs activesync connection with the computer. since microsoft activesync doesn't applicable anymore, I have no idea how to build connection with my phone. Besides, nothing seems happened every time I connect my phone with usb cable. Its just like my pc couldn't detect the device.
Should I install some kind of programs first on my pc? or am I miss some steps to make my phone detected by my computer?
I'm using windows xp by the way..
The CustomRUU still works for me if you boot the phone into SPL first (reset and camera+power buttons) then plug it into the computer and run the RUU (no activesync connection), so you should be able to flash a WM ROM, then you can sort out the HardSPL later
EDIT: Or does that only work for me because I have already got HardSPL?
yes it works..
the process goes, but only for 1 % . my phone reset itself and the notification on my pc says about invalid vender ID "this update utility cannot be used for your PDA phone, please check your update utility."
since the only stock rom that I found is .exe which is extract itself, I couldn't use The CustomRUU. Could this be the problem? or do I choose a wrong rom?
edit : I'm trying to install Factory Shipped ROM form HTC
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship
Do you know where to find stock rom for kaiser? most of the post about stock rom leads me to wiki xda, which is not available anymore.
thanks.
Not sure if these will work, but there are links to original HTC and ATT ROMs here
Also at the bottom of that post is a link to some reconstructed original ROMs
I have no idea if these will work any better than the one you've already tried, but it's probably worth having a go
thanks for the link..
I have visited that thread before, actually the 1st ROM that I tried to flash is also from that page. Both original ROMs for HTCor ATT doesn't works for my phone. But thanks to you I just realize the link about some reconstructed original ROMs.
Well, My phone is KAIS-100 which is made in Taiwan.
I guess I'll try Chinesse HTC 1.56.708.3.
I hope this one will make a progress.
-----------------------------------------
aww... still not working..
with reconstructed ROM, the process stuck at 0%, give me error [262] notification : update error. The manual said that if this kind of error occurred, I just need to do soft reset and run RUU again. I have tried several times even restart my pc first, but still not working.. any suggestion?
Try to flash radio. If you can't do it i think that you have messed up the bootloader
I can't...
the result is same, I'm trying to flash KAIS_Radinly_1701909 or KAIS_RADIO_ONLY_1710901_Custom, I got stuck in 0% with error [262]
The text in my bootloader says
KAIS-100
SPL-1.56.0000
CPLD-8
So, is there nothing else I could do if I have broke my bootloader?
No one can help me anymore? T-T
(running to the middle of the street and shout "why God, why??")
So, the lesson is :
If you are trying to flash back to windows mobile, DO NOT use factory shipped rom. Because it will modify your hard SPL and downgrade your radio version.
If the process failed and your hard SPL gone, you will get stuck in half working android without being able to flash anything, including correct your radio version, or reflash your kernel to fix your panel setting.
correct me if I'm wrong..
well, I hope my experience could be useful for you.
Thanks.
You can extract the exe file with winrar and you'll have all the files including RUU_signed.nbh
Rename it to kaisimg.nbh and copy to sdcard
Don't know if you can install from sdcard but since it's the shipped rom it might let you.
thank you salac..
I also have tried that method, using winrar to extract exe files.
but still, no luck for me..
Flashing via SD card got me stuck at loading screen, and I also tried to use custom RUU to flash the files via usb but my phone reset itself at 1% of the process and gives me error message [294] : invalid vender ID.
SOLVED
Finally
after days of yearning..
I found a suitable WM 6.1 ROM for my kaiser.
My phone is KAIS 100 HTC P4551. Usually, KAIS 100 model is for AT&T but mine is HTC branded, so that's why AT&T stock ROM won't works and my phone was originally shipped for US, that's why most of WWE stock ROMs always give me error 294.
So, basically I have to use HTC WWE ROM for US and this is really gives me hard time since HTC US website only provide ROM for AT&T.
In case you have same problem with me, I have uploaded the ROM at rapidshare
and you could find it here.
Now, I can flash a hardSPL, fix my radio version....
and flash back to android..