i cant get programs running in BA, like wisbar, YM Mobile, ilauncher, pls help, but the BA works fine in calling and texting, my last resort is HARD RESET again, am tired......pls help, tnx!!!!
Hiya, a few quick questions if I may:
1) How are you trying to install these programs?
2) Have you managed to get *any* third-party software running?
3) Are you still running WM2003?
4) Have you performed any rom upgrades?
That'll do for now
i install it in a normal way, via activesync, am currently running WM2005, before when i was running 2003 all seemed 2 be normal, any suggestions? tnx...............
another question how do u use the program system memory? cause when i install all the programs use storage memory not program memory, am loosing space, heheheh
AH (steps away) - you're running WM05... ok. AFAIK from skimming some of the posts here, most software you're used to running on 2003 won't work on '05. Think back to win 3.11 - win95 and I reckon it's a similar thing.
I decided not to go for WM'05 as there's nothing I wanted that it offered apart from WMP10 which is in the latest 2003 roms anyway. Plus, I have a whole batch of 2003 software which I like to run!
'Fraid I can't help mate, except to say "Run, run like a frightened rabbit!"
Related
I figured this out by accident..
I upgraded to windows mobile 2003 SE 2.06 but after I found out that half of the programs (MMS composer, cammera, etc..) dont work, due to incompatibility (error message says they are incompatible) I wanted to downgrade.
I ran the same ROM instalation (2003 SE 2.06) and waited for it to erase my ROM, then I took the phone out of cradle. I was dead at that point. I removed main battery, put it back in. Reboot the phone in bootloader mode (hold down D pad in centre position, then power button and soft reset - all at the same time). Then I put the phone back into the cradle and ran the ROM instalation of my choice. No more problems.
Well, I think using SD card method may be saver.
However, I forgot how to do this.
Cheers,
Darko3 said:
I figured this out by accident..
I upgraded to windows mobile 2003 SE 2.06 but after I found out that half of the programs (MMS composer, cammera, etc..) dont work, due to incompatibility (error message says they are incompatible) I wanted to downgrade.
Click to expand...
Click to collapse
Same thing, I badly need to downgrade to 1.72 or 1.66. I tried it, it did not work. I was was adviced that there is a 1.66 SD version which is safe and possible to apply, any advice where can I find it???
Bty, MTUX 1.4 Ring tone, and other software runs very slow and creats porblems with 2.06!! Beside 2.06 hard reset by itself on weekly basis!!!
Any advice where to find 1.66 SD version?
HELP HELP HELP....
hello people...
i desperately need to downgrade from wm2003se to wm2003. please tell me where can i find my original rom of wm2003. thanx you.
by the way... my ppc is an O2 Xda II.
please do help somebody... its kinda urgent...
Hello everyone.
I have just bought my Hermes (AT&T 8525) after one year of planing so. It came with WM5. I downloaded some of the ROMSs, radio and bootloaders commented here. I tried reading all the vast infromation in this forum and the wiki, but still having a problem.
THE PROBLEM IS AS FOLLOW:
When I start the flashing process, using HTC_TyTN_WWE_3[1].54.255.3_6275_1.48.00.10_108.exe or RUU_Hermes_CINGULAR_WWE_3.1.57.502.1_6275_1.48.00.00_108
... everything goes well, until the progress bar appears in my PC. When it appears, ActiveSync in my PC closes and my Hermes goes to stand by (the lcd goes off) so I cannot complete the installation process.
The phone works pretty well and I'm really amazed for all its capabilities. But still, I'm stucked with wm5.
Why do you think this happened?
PS: I flashed the radio (1.51.00.10) and bootloader (HARD SPL v7). My ROM version is 2.15.502.3. I use "ActiveStink" to sync my files without problems.
Any advice will be more than welcome!!
I'm no expert but that appears to be normal behaviour!
ActiveSync is only used at the start of the process. After a few files have been transfered, Activesync is closed and a different link is established. If you just leave it for a short while longer, a progress bar should appear on the Hermes too.
Yes, ActiveSync will disconnect. The RUU takes over the connection. Have you let it sit - sometimes it takes a minute for the progress bar to move.
Have you consulted www.mrvanx.org for help on the flashing?
todd_jg said:
Yes, ActiveSync will disconnect. The RUU takes over the connection. Have you let it sit - sometimes it takes a minute for the progress bar to move.
Have you consulted www.mrvanx.org for help on the flashing?
Click to expand...
Click to collapse
I'm having the same problem - always have. The message tells me that I'm disconnected and that I should check my USB connect etc. I left that box up there for about 15 minutes. Now I've closed the box and have waited several minutes with no activity. This is pretty aggravating. Thanks for any help.
try turning off your antivirus aplication. thats work for me flashing my tytn to wm6.
I've done everything.... I guess
Hi...
Yes, I consulted the www.mrvanx.org, excellent tutorials.
I flashed without problem the radio and bootloader. The progress bar started to "progress" and everything was fine. The only problem I have is flashing the WM6.
I don't remember where, but I readed that flashing the bootloader "Hard SLP v7" causes my HTC not to accept any Oficial WM6 ROM. The article said that I only had the chance to flash a coocked or modified ROMs. Is this true?
If not... what else can it be? I also closed all my applicacations including the antivirus, goback, disabled the internet connection, the logictec mouse center, etc. and nothing, the same as Chicoh happens to me.
"Error 260: Connection... check the USB cable bla bla bla."
Should I restart in safe mode to do the flashing?
Should I try to install a modified ROM?
Have in mind I've tried three different official ROMs: WWE, Cingular and spanish.
Thanks to all the comunity!!!
Saludos desde México!!
Greetings -
I had a similar problem and couldn't get the thing get going. My solution was to load it from the SD card. This worked flawlessly.
liquidsilver said:
Greetings -
I had a similar problem and couldn't get the thing get going. My solution was to load it from the SD card. This worked flawlessly.
Click to expand...
Click to collapse
I'm trying that as we speak. I have a good feeling about this. I'm a little concerned that I didn't think of it though. Makes perfect sense - Skip the middle man.
UPDATE: Crap. No luck. Thanks all the same though. I'm not giving up.
What OS are you using, xp or vista? My vista 'top had the same problem wouldnt flash for the longest time and i had to use my xp.
However, it does work now. Not entirely sure why.
Now I had success!!!
Hello my friends.
It seems that the article I readed days ago detailing that after flashing the Hard SPL v7, I could only install a modified ROM, not an official one from HTC or Cingular.
I downloaded Black Satin and installed it without any troubles. The entire process lasted only 3 minutes!!!
I wanted to have an official ROM, don't ask me why, and never tried the "other" ROMs that are actually excellent!!! some apps that were on WM5 are not in WM6, which is kind of sad, but if there's something that I love of WM Smartphones is that I can download and install whatever I want or develop it if it doesn't exist!!!
By the way, I use Windows XP Pro.
Thanks for all the support!!!
PS: Before flashing the Hard SPL v7, I tried installing the cingular WM6, but didn't make it. That's why I readed almost all the pages and threads here in xda-developers and found that flashing a new bootloader was a very good idea. The rest of the story is known by you.
Guys,
I am ****ed.
Just installed the new pays rom - and then my standard applications like the spb software suite.
Just rebooted the device, and it now keeps on hanging on the bootloader.
Tried to reset the phone several times to no avail.
Anybody got a clue what might cause this?
Thx in advance,
trial
Flash the rom you had before when the device gets to bootloader mode.
Or one official rom.
Logically it should be ok and the rom will be flashed to your tytn
thx for the quick reply
Hi,
I had the same Problem. I solve it by flashing the 2.15 lite (German) Version.
But that fix just the problem with the booting. Now, the Bootloader 2.03 and can't flash anything else.
cu..dil
trialbin said:
Guys,
I am ****ed.
Just installed the new pays rom - and then my standard applications like the spb software suite.
Just rebooted the device, and it now keeps on hanging on the bootloader.
Tried to reset the phone several times to no avail.
Anybody got a clue what might cause this?
Thx in advance,
trial
Click to expand...
Click to collapse
You might watch the language, we all know how to curse here, comes naturally from repeated flashing.....
So, I'd advice flashing an official ROM and take it from there. My last posts have referenced this, so follow the bouncing ball.
seems like problem for a lot of wm 6.1 roms. Been suggested that its a compatability problem with wm5/6 3rd party apps. try HR then put your apps on and test for a day or 2 to see if that app is the problem then put on next app etc.... Cheers
ultramag69 said:
seems like problem for a lot of wm 6.1 roms. Been suggested that its a compatability problem with wm5/6 3rd party apps. try HR then put your apps on and test for a day or 2 to see if that app is the problem then put on next app etc.... Cheers
Click to expand...
Click to collapse
Agreed with ultramag69 ... not all wm5/6 3rd party apps compatible with wm6.1 .. so be prepared.
Faced this problem last time... install nice wm6.1 rom (TNT) but not compatible with my favorite apps so shift back to wm6 rom (schaps)
I need some help here, I have a Qtek 9100/Wizard which is basically dead, it hangs all the time, the screen freezes and does a weird fadeout with some various colors. This started happening about a month after I unlocked it and tried WM6.1 Slim Edition, I am running some other ROM that my GF installed, same problem. Is the phone totally borked or is it worth to try to fix it?
Anyway, back to my main question I want to transfer my contacts and calender from my Wizard to my Wallaby PocketPC2002 I got from a friend when my Wizard started fubaring. I have it backuped with PIMBackup but PocketPC2002 wont run that darnded program. Whats the best way to do this? IF I get the Wizard to run stable for a few mins, copy/sync the calender/contacts with a computer and then try to sync/copy it back to the Wallaby? Or convert the PIMbackup files to some other format that works with PocketPC2002? I have mailed the author of PIMBackup but he hasnt answered yet.
No help no tips?
I downloaded Rhodium-HardSPL_V2_00R3_185HSPL.zip and unzipped but i cant perform hard spl using this.. it says error[246] device not responding.. it is not allowing me to perform both the automatic and manual hspl.. even i hard reset my mobile before performing HSPL.. I am in UK using Tmobile Touch Pro2 ROM version 1.86.401.0 (67102)WWE; Radio Version 4.49.25.17.. Please anyone help me to perform HSPL and install the Cooked rom...
Edit/Delete Message
Is your phone service on? It can't perform HSPL if it isn't on.
You might want to check that your phone is synced to Windows on your computer.
Vista needs Windows Mobile Device Center installed to sync I believe.
Had lots of issues doing the same thing to my Tilt2.
Here is what I did. I deleted any partnership in Activesync (probably did nothing but did not hurt)
downloaded enablerapinew.cab and installed it on memory card
did a hard Reset (actually 2 but hey who knows)
Moved enablerapinew to phone, removed SD card and ran enablerapinew.cab let phone sync with whatever name it wanted.
Once synced I ran the installer in automatic and it worked.
I spent 4 days trying everything so there is hope.
Thank u INRBigness i removed my Memory card and it works... Thank u very much
flashing touch pro 2
i have tried every trick in the book to get the hard spl on my touch pro2 from sprint. i am ready to give up and just suffer with the stock rom. please help!
As the OP's device is in this shape in his other thread here it's no wonder the HardSPL is not working.