PLEASE Help me with MULTIPLE APN!!!!!! - Touch Pro2, Tilt 2 Windows Mobile General

Hi,
I have HTC TP2.WinMo 6.1
I am a user of PUSHMAIL from Etisalat(U.A.E). The service provider provides pushmail software for using pushmail. the software uses the seperate access point i.e. pushmail and for using internet, the accesspoint is different.
I want to use internet and wants Pushmail to be always connected simultaneously, i.e. internet and pushmail should work together.
here is the help and explanation from HTC Customer care:
Settings of the Direct Push Mail for Etisalat: Kindly note that there's a small problem in the software that Etisalat has released, and this problem is that you can't choose the default modem or network that you are connected to, thus you have to make the modem of the Push mail the default modem of all programs on the device. And as long as you can't connect to two modems at the same time, you won't be able to use the GPRS (internet) at the same time with the Direct Push Mail. The solution for this problem is to manually switch between the Direct Push Mail modem (GPRS.ae) and the GPRS modem (Etisalat.ae), (or incase of smart phones, switch between the Direct Push Mail Network(Etisalat Push Mail) and the GPRS Network) and this might be acceptable because you have to be connected to the Push Mail 24/7 while you only use GPRS and internet browsing for a couple of hours.
• Go to http://www.etisalat.ae/pushmail and click on the "Download Client/Software" icon OR Directly go to http://personal.pushmail.ae/download
• Choose the model of HTC Mobile, or even the closest one (All PDA's have the same software) • Download the software (a Zipped file almost 2.5 MB) and install it on your device using the Activesync.
• To install the software on the device, go to start ProgramsFile explorer, and search there for the file that you have just installed (You'll find it in the same place that you copied the file to from the PC)
• Tap on the Zipped file, and it will automatically start installing (Choose Memory card if available as a location for installing it)
• After installing with the required language, the phone should be restarted.
• After Restarting the phone, go to start Programs Etisalat Push Mail (The green icon of Etisalat)
• If you are asked for an "Access Point Name", Choose "Push mail" from the list you have.
• If you didn't find "Push Mail" in the list, or if you are not asked for an access point please do the following:
• Tap Start Settings Connections Tab Connections.
• You'll find 2 tabs; tasks and Advanced, tap the Advanced Tab.
• Tap "Select Networks".
• Under "Programs that automatically connect to the internet should connect using", Select the default network that you use for the GPRS Service, and tap Edit.
In the Modems Tab, tap New.
• Enter any name for this connection (for example: Etisalat PushMail)
• Under "Select a modem", select "Cellular line (GPRS)", and tap Next.
• Under the "Access Point Name", write GPRS.ae, and tap Next.
• Leave the Username, Password, and Domain blank, and tap Finish.
• You'll return back to the modems tab where you have a table of "Name / Number", long press the modem you've entered till a drop down menu appears "Delete / connect", and choose connect.
• After connecting to the correct modem, choose whether you want to set up a personal Email or a corporate email, and enter all required fields for your mail.
Someone please help me to make both internet and pushmail work at the same time on my htc tp 2.

There is a blackberry connect thread on here somewhere that tells how to activate multiple APN's

thanks for the reply. i already had a look at that, but it will work for blackberry i think. plus i am a noob and this is my first ever windows phone. there are a lot of genius techies out here, i wish some one colud help me out with it.
thanks.

can anyone help me in acheiving this.
everytime when i need to use internet on my tp2, i have to select and connect etisalat internet accesspoint,which results in disconnecting pushmail services.
someone plz help me.

Related

MMS Issue with several WM6 ROM's

Okay,
I got my P3600 yesterday, CID Unlocked it and have ran several rom's on it.
But I have noticed that the MMS Sending and Recieving facility does not work.
I have checked my settings with my Service Provider (O2 Ireland Contract)
And have used the Network Wizards that are on some ROM's to no avail.
Basically what happens is the MMS goes to 99% and then fails and stays in the Outbox and incoming MMS does not come in at all.
I have also upgrade to the 1.50 radio and this has not made a difference.
Is this a known issue, currently using the most recent Bepe rom so hopefully a solution can come up for this as it is a very nice and versatile rom.
same issue here on o2 ireland, mms with the same sim card in another phone works fine, but on the trinity it just stays in the outbox with the little clock in the top left corner of the message icon..tried 3 or 4 latest ROMs, even the official dopod 3600i ROM, same difference.
any help appreciated
At least I'm not on my own, thanks for the feedback dude
Network Wizard may have some configuration error.
For example MMS setting for WIND (ITA) are wrong, it uses for the gateway 212.245.244.1 but the correct one is 212.245.244.100.
Double check your MMS settings to see if there are some errors.
For cookers:
The file provision.zip can be modified, inside there are operator settings for various conuntry.
The password of the archive is 1234, modify the wrong entries, then repack and remember to reprotect the file with the same password (1234).
If anyone needs the correct entries give me a shout I have all the screen shots for WAP 2.0 and WAP 1.2 settings but the darn MMS dont work.
I am certain it is something very simple bu what is the mystery
I'm afraid I'll have to mirror you again here mate, settings are not the issue, tried every possible combination, old ones, new ones, old ones mixed with the new ones, etc....no joy...
I had a similar problem with an SP5 last year after a lot of fiddling I got it.
It seems to be not as straightfoward as I thought.
If anyone has a P3600 with working MMS for O2 Ireland can you post your settings here, it is most likely some straight port and IP combination
Actually has anyone here used MMS on any rom sucessfully especially on Irish Networks ?
Reply I got from HTC :
Wont work for me can you test :
The issue you are describing is not a knowing issue, please check the settings, this?is the settings for paying monthly.
MMS
Tap Start then Settings
Tap Connections, then Connections
Tap Advanced
Tap Select Networks
Tap the New... button under Programs that automatically connect to the internet should connect using
In the Enter a name for these settings field, enter?O2 MMS
Tap on the Modem tab and then tap the New. button
In the Enter a name for the connection field, enter?O2 MMS
In the Select a modem menu, select Cellular line (GPRS) or Cellular line (GPRS, 3G)
Tap Next
In the Access Point Name field, enter? wap.dol.ie and then tap next
In the Username field, enter?nothing
In the Password field, enter?nothing
Leave the Domain field empty.
Tap Finish
Tap the Proxy settings tab
Tick the This network connects to the internet box
Tick the This network uses a proxy server to connect to the internet box
Tap the Advanced button
Tap on HTTP
In the Server field, enter 62.40.32.40
In the Port field, enter?8080
Tap OK twice
In the Programs that automatically connect to the internet should connect using menu, select My ISP.
Tap OK
Tap Start
Tap Messaging
Tap Menu, Tools and then Options
Tap MMS
Tap the Servers tab
Tap the New button
In the Server name field, enter?O2
In the Gateway field, enter 62.40.32.40
In the Port number field, enter?8080
In the Server Address field, enter HYPERLINK "http://mmsc.mms.o2.ie:8002/"http://mmsc.mms.o2.ie:8002
In the Connect Via menu, select?O2 MMS
Set the Sending size limitation to the maximum available. (this may incur extra charges with your network. Consult your network for charges for large MMS messages)
In the WAP Version menu, select 2.0
Tap OK Three times

GPRS on a Pay as You go O2 Sim card?

Because O2 starts charging the 0845 and 0844 number, I had cancelled my o2 contract, and changed to Pay And Go.
But the previous GPRS setting prevents me to get access to the internet. After I hard-reset the O2 WM6 system, and run the O2 Operator Settings, still no luck.
I quite sure that my number can access to GPRS system, as I received a txt from O2 saying that I have 5M browsing allowance this month.
Any help would be appreciated!
Thanks !!!
You can't browse the internet on O2 Pay as you go. The only company that allows it on PAYG is Orange as far as I know.
you should be able to go on the internet on any network, payg or contract... it just usually costs a lot on payg.
mugglesquop said:
you should be able to go on the internet on any network, payg or contract... it just usually costs a lot on payg.
Click to expand...
Click to collapse
I thought so too, but just not able to get around it, yet.......
what carphead said in effect is correct "You can't browse the internet on O2 Pay as you go. The only company that allows it on PAYG is Orange as far as I know."
with O2 PayAsYouGo and xda's, pda's whatever you wana call them, you cannot access the worldwide web. you can access wap sites, i.e. wap.google.com, but you have to put WSP:// instead of http://. for example WSP://wap.google.com. by entering wsp:// it then uses the wap connection which is under My Work Network in connection settings and not the mobile web connection under My ISP. the problem is there isn't that many wap sites you can access with the XDA's.
terabaap said:
what carphead said in effect is correct "You can't browse the internet on O2 Pay as you go. The only company that allows it on PAYG is Orange as far as I know."
with O2 PayAsYouGo and xda's, pda's whatever you wana call them, you cannot access the worldwide web. you can access wap sites, i.e. wap.google.com, but you have to put WSP:// instead of http://. for example WSP://wap.google.com. by entering wsp:// it then uses the wap connection which is under My Work Network in connection settings and not the mobile web connection under My ISP. the problem is there isn't that many wap sites you can access with the XDA's.
Click to expand...
Click to collapse
i can view normal websites... but sometimes the site realises i'm on a mobile, and automatically forwards to their mobile version. for example www.google.co.uk automatically forwards to www.google.co.uk/m
it can be done
Connecting a Windows Mobile 5/6 device to O2 Prepay (touchscreen devices only)
Please note that these settings are only for touch screen windows mobile devices (there is currently no support for non-touch screen devices). Please also note that only Mobile Internet Explorer will work with these settings, you will not be able to use or access Mobile MSN or Outlook as these are not supported.
• Go to Start > Settings > Connections > Advanced (Tab) > Select Networks (Button)
• You should now be on a screen titled “Network Management”. Now select both drop boxes to “My Work Network” then tap OK
• You now need to tap the Tasks tab and then the “Manage existing connections” link
• From here, tap the New button
• Name the new connection “O2 GPRS” and select modem as “Cellular Line (GPRS)” then tap Next
• You will now asked for the Access point name, here you should enter: “payandgo.o2.co.uk”, then tap Next
• You will now be asked for the username and password. The username is “payandgo”, and the password is “password”
• Ignore the Domain box and ignore the Advanced button, just tap Finish
• You will now be presented with a screen with your connections listed. Simply tap “O2 GPRS”. (There will now be a dot besides the name “O2 GPRS”. There may be other connections, you can delete if you wish. You also may have an “Auto pick” option, do not select this)
• You now need to tap the Proxy Settings tab
• On this screen you need to make sure that both the “This network connects to the Internet”, and “This network uses a proxy server to connect to the internet” tick boxes are both ticked
• In the Proxy server box below the tick boxes, enter: “193.113.200.195”
• Now tap the “Advanced” button
• Tap HTTP, enter server as “193.113.200.195”, port: “8080”, tap OK
• Tap WAP, enter server as ”193.113.200.195”, port: “9201”, tap OK.
• Leave Secure WAP blank (if there is anything in this entry, delete it)
• Tap Socks, enter server as “193.113.200.195”, port: “1080” and the type as “Socks 4”, then tap OK
• Tap OK 3 more times. Then tap X
• Now launch Mobile Internet Explorer to test the new settings
As far as my testing goes your not restricted to WAP sites, I was able to use full google, and and also access a few forums with no problems.
I hope this helps.
Cheers, Kev
kosborn2 said:
Connecting a Windows Mobile 5/6 device to O2 Prepay (touchscreen devices only)
Please note that these settings are only for touch screen windows mobile devices (there is currently no support for non-touch screen devices). Please also note that only Mobile Internet Explorer will work with these settings, you will not be able to use or access Mobile MSN or Outlook as these are not supported.
• Go to Start > Settings > Connections > Advanced (Tab) > Select Networks (Button)
• You should now be on a screen titled “Network Management”. Now select both drop boxes to “My Work Network” then tap OK
• You now need to tap the Tasks tab and then the “Manage existing connections” link
• From here, tap the New button
• Name the new connection “O2 GPRS” and select modem as “Cellular Line (GPRS)” then tap Next
• You will now asked for the Access point name, here you should enter: “payandgo.o2.co.uk”, then tap Next
• You will now be asked for the username and password. The username is “payandgo”, and the password is “password”
• Ignore the Domain box and ignore the Advanced button, just tap Finish
• You will now be presented with a screen with your connections listed. Simply tap “O2 GPRS”. (There will now be a dot besides the name “O2 GPRS”. There may be other connections, you can delete if you wish. You also may have an “Auto pick” option, do not select this)
• You now need to tap the Proxy Settings tab
• On this screen you need to make sure that both the “This network connects to the Internet”, and “This network uses a proxy server to connect to the internet” tick boxes are both ticked
• In the Proxy server box below the tick boxes, enter: “193.113.200.195”
• Now tap the “Advanced” button
• Tap HTTP, enter server as “193.113.200.195”, port: “8080”, tap OK
• Tap WAP, enter server as ”193.113.200.195”, port: “9201”, tap OK.
• Leave Secure WAP blank (if there is anything in this entry, delete it)
• Tap Socks, enter server as “193.113.200.195”, port: “1080” and the type as “Socks 4”, then tap OK
• Tap OK 3 more times. Then tap X
• Now launch Mobile Internet Explorer to test the new settings
As far as my testing goes your not restricted to WAP sites, I was able to use full google, and and also access a few forums with no problems.
I hope this helps.
Cheers, Kev
Click to expand...
Click to collapse
You are a prince!!!!!!!
Thank you so much!!!!!!!!
gprs settings
Thanks Mate you are a life saver i have been looking for them all over
I'm glad to be of assistance. I've always been a eager reader on these forums and it's nice to post something thats helpfull. It only took me around an hour a half to get these settings working! I needed them myself so i could use my O2 payg sim in my Orbit, and being without gprs was getting annoying so had to get it working. And so I did. It all seems a bit complicated but all the steps are nessesary. And I am still trying to find out if outlook can be made to work.
Anyway cheers all
carphead said:
You can't browse the internet on O2 Pay as you go. The only company that allows it on PAYG is Orange as far as I know.
Click to expand...
Click to collapse
And t-mobile and the 3 network,its just o2 who wont let you access the net. But i am wondering now, if it is worth paying the 7.50 a month to O2 for the mobile web bolt on
kosborn2 said:
I'm glad to be of assistance. I've always been a eager reader on these forums and it's nice to post something thats helpfull. It only took me around an hour a half to get these settings working! I needed them myself so i could use my O2 payg sim in my Orbit, and being without gprs was getting annoying so had to get it working. And so I did. It all seems a bit complicated but all the steps are nessesary. And I am still trying to find out if outlook can be made to work.
Anyway cheers all
Click to expand...
Click to collapse
I don't know, mate. But from the settings above, I doubt that you can use Outlook, though I very much like to able to use it too. Becoz from the settings above, you route the internet though a proxy, and outlook itself use a different port which hasn't set in the proxy.
Those settings work for Exchange Activesync too
Good work there, sir.
On a WM6 Pocket PC (sorry - "Professional") I applied the settings you provided, killed the wifi radio and did a send/receive in Pocket Outlook.
It worked. So much for O2's odd attempts to push data users into the contract world.
So, thank you very much. Kudos.
is Outlook part of the Office set of programs... i havent got it on mine, but it would be very useful
Pocket Outlook = Standard Windows Mobile Email client
Sorry, I was using an archaic term there.
What I meant was setting up an Exchange ActiveSync partnership between my Exchange server and my Windows Mobile device, using the built-in bog-standard Microsoft messaging app.
I'd just like to say a huge thanks to kosborn2 for posting those 02 settings, I'd been resigned to being unable to have GPRS on my 02 Exec because I'm a lowly Pay as You Go customer! Every now and again I'd have a quick look on the internet but it was usually the same wrong settings. Well done that man, you've made my day.
From experience o2 do try and restrict some pag customer to some sites a trick work round o2s restrictions and save time and data usage is on you pc (not ppc) right mouse click on the part of the page you want to view i.e. http://charts.moneyam.com/Chart.asp...SV=0&YFormat=g&XFormat=hh&Fix=1&E=UK&Code=UKX
Save to ppc favorites and it should work
Magic!
I've put a PaG O2 card in my old Himalaya (flashed to WM5) with my contract card in my Artemis, and now my wife can use it for GPRS thanks to thoose settings.
Thanks very much
thanks a lot for the settings, this is the only place i could find these settings, o2's website is no help whatsoever. without wanting to hijack the thread have u ever got mms working? i upgraded windows mobile and dont have the o2 active add on bits so i was wondering how i could send/recieve mms? thanks a lot again.

WM6.1 and Auto Email Config

I have installed the ShadoW_2.0 TE ROM, and went to set up my Gmail email via IMAP. However, Windows 6.1 doesn't seem to want to allow me to set this account up manually, just via automatic config. Unfortunately, the auto config for Gmail sets the account up as POP3, not IMAP...
Am I missing some secret switch here to tell WM6.1 Messaging not to use auto-config settings? The onboard Help file says that you can turn off auto-config, but I can't seem to find that setting...?
from the gmail setting page......
To configure IMAP for your Windows Mobile 6 device, just follow these steps:
1. Enable IMAP in your Gmail account settings.
2. Open the Start menu and select Programs > Messaging > New E-mail Account.
3. Enter your Gmail username (including '@gmail.com') in the E-mail Address field.
4. Uncheck the box to get settings automatically from the Internet and select Next.
5. Select Internet e-mail as your email provider in the drop-down menu.
6. Enter your name as you want it to appear in sent emails.
7. Enter a descriptive name for the email account and select Next.
8. Enter 'imap.gmail.com' in the Incoming Mail Server field.
9. Select IMAP4 as the Account type from the drop-down menu and select Next.
10. Enter your Gmail username (including '@gmail.com') and password.
11. Select Next.
12. Enter 'smtp.gmail.com' in the Outgoing (SMTP) Mail Server field.
13. Make sure that the Outgoing server requires authentication box is checked.
14. Select the Advanced Server Settings link.
15. Make sure that the Require SSL box is checked for both incoming and outgoing emails.
16. Select The Internet as the network connection from the drop-down menu.
17. Select Done and then Next.
18. Select how often you want your phone to send/receive emails from the drop-down menu.
19. For more download options, select the Review all download settings link.
20. Select Finish.
Thanks, but...
You're right, and quite quick. However, on the ROM that I'm running (don't know if this is a WM6.1 or ROM-specific issue), I don't have the checkbox for step 4.
4. Uncheck the box to get settings automatically from the Internet and select Next.
Help?
I found a workaround, albeit a bit sloppy. If you provide a non .com ending it will ask you if you want to check for settings (ie [email protected]). You then have to go back and change the settings when the account is setup.
Like I said, sloppy.
I am running Shadow 2.0 and using Gmail with no problems...maybe you need a hard reset!
uiskibum said:
I found a workaround, albeit a bit sloppy. If you provide a non .com ending it will ask you if you want to check for settings (ie [email protected]). You then have to go back and change the settings when the account is setup.
Like I said, sloppy.
Click to expand...
Click to collapse
Sloppy, yes, but it worked. Once I put in the different TLD at the end, I did see the option to auto-config or not. When I got past that, the rest of the Gmail IMAP config worked fine. Thanks for the help!
noahv said:
Unfortunately, the auto config for Gmail sets the account up as POP3, not IMAP...
Click to expand...
Click to collapse
I am sorry, probably this is not the right place for this post, but i was curious about this thread. I always access my gmail through pop3, so what are the main differences and advantages of choosing IMAP?
Thanks in advance

email only working with wifi enabled?

Hey Forum,
I have my HD mini for a few days now and I've set up two different IMAP email accounts. One is a Gmail account, the other is off a domain i own.
When I have WIFI enabled, then everything is fine.. I go to an Inbox and hit menu => send/recieve and the new mails arrive.
When I then disable the WIFI connection, then my phone doesn't do anything. It just states "Connecting" in the status bar and then pops out a message saying that it couldn't connect and I should check the settings.
Meanwhile, I can use the mobile internet off my contract without a problem in other apps. Say Opera, IE, Facebook and so on. So the Link is up, just the emails won't work.
What I tried:
- changing the ssigned connection to the mobile one in:
"Mail Inbox => menu => extras => options => choose mail accounts => edit settings, continued to mail-out server, there is an "advanced settings" link where I can set the assigned connction either to "internet" or to "contract name".
When Internet is chosen, I can fetch mails via WIFI.
Otherwise, when my provider (T-Mobile Internet) is chosen or WIFI is disabled, then nothing works.
What the hell is that? This can't be a feature, right? How can I fix this?
Thanks
€dit: Sorry, I didn't recognized that I was posting in the wrong Forum. SHould have gone to the "General" board.,..
try:
-windows button
- e-mail
- select your account
- edit account setup
-next, next, until outgoing (smtp) mail server
-you'l find advanced server setting on the bottom, click on it
-select your main internet connection (anything else than The Internet)
this should work
radu1979 said:
try:
-windows button
- e-mail
- select your account
- edit account setup
-next, next, until outgoing (smtp) mail server
-you'l find advanced server setting on the bottom, click on it
-select your main internet connection (anything else than The Internet)
this should work
Click to expand...
Click to collapse
HI Radu,
sadly, this does not work with my IMAP accounts!
I just did a RESET on my phone because of this error and it still does nothing. everything else works... I can use web, some apps like facebook, peep, skype, pigeon IM and so on!
Side note: When I
- set any account to use "Internet" (not the 3g contract)
- then disable WLAN and my contract data connection
- head over to an inbox of a mail-acc
- press send/recieve from the menu
THEN: 3G connection is being connected, in status i can read:
- connecting ...
- logging in ...
then it aborts.
sometimes the phone says "synchronisation error" and sometimes it says I should check my account setup. But like I've mentioned the setup is fine. as soon as WIFI is enabled, all the accounts do work.
I have a mobile flat rate via "mobilcom debitel" which is in the german T-Mobile net.
I'm just a tip away from dumping that crap on the ground and stomping on it untill I arrive in australia.
Thanks for your time
OK. Solution found. The contract mobilcom debitel D1 aborts all connections to IMAP/POP because they want to sell their Push-Mail package.
****ing annoying.

WiFi on + radio off = Browser but no E-mail? WTF?

I had this problem on my BlackBerry, too, and I figured it was some stupid RIM thing. But now I'm having it on my Touch Pro 2.
I want to run on WiFi but with the radio off -- like when I'm roaming someplace expensive, but in a hotel where there's WiFi. When I do this, I can browse just fine, but the Inbox (standard WM mail program) says it can't make a connection. When I turn the radio back on, the mail comes through... but I don't know which connection it's using.
Anybody know how to fix this? Or at least, what's going on?
I dont know exactly what the problem is here, but i've always had this problem, I actually havent even tried just wifi in a while. I would say just use the http version of your email when you turn the radio off to save the frustration
I found the answer.
The connection that the Inbox uses to contact the server is set in the server settings -- so you can have a different approach for each server, I guess. Anyway, it's:
Tools > Options
Then tap the name of the server you want to change. On the next screen, tap Edit Account Setup. Then it's Next, Next, Next, Next, (4 of them) until you get to the screen that says Outgoing (SMTP) mail server: and lets you set up an outgoing server. At the bottom is a link that says Advanced Server Settings. Tap that, and look at the pull-down for Network Connection. There should be one called The Internet, which does NOT exist in Start > Settings > Connections. As far as I can tell, that's the WiFi. If you choose that, then tap Next until you tap Finished, Inbox will retreive E-mail via WiFi even if the radio is turned off.
EWAdams said:
The connection that the Inbox uses to contact the server is set in the server settings -- so you can have a different approach for each server, I guess. Anyway, it's:
Tools > Options
Then tap the name of the server you want to change. On the next screen, tap Edit Account Setup. Then it's Next, Next, Next, Next, (4 of them) until you get to the screen that says Outgoing (SMTP) mail server: and lets you set up an outgoing server. At the bottom is a link that says Advanced Server Settings. Tap that, and look at the pull-down for Network Connection. There should be one called The Internet, which does NOT exist in Start > Settings > Connections. As far as I can tell, that's the WiFi. If you choose that, then tap Next until you tap Finished, Inbox will retreive E-mail via WiFi even if the radio is turned off.
Click to expand...
Click to collapse
Thanks!!! That works well on every pop-email-account for me!
But how can I choose the connection for my hotmail-account in the inbox? I found no way to prevent using the GSM-connection without switching the radio off, when I try to update my hotmail-account.
Anybody knows how to fix this?

Categories

Resources