Hello people, I really need your help with this one..
I have the o2 XDA Trion, with their OEM firmware of WM6. Everything was working fine, but just recently when ever the screen goes into standby(Turns off which ever jargon you may use) then no notifications will happen; however if the phone is active.. with the light on then all notifications happen fine.
I have just flashed the firmware again last night using the softkey and soft reset.. then I installed VJToggle(For buttons on today screen), Rltoday, SL2U(Apple slide locking program).. it still does it! I removed each application and still no joy.
I am starting out with an absolute clean install this morning and hoping that my problems are resolved.. has anybody have any ideas?
I will keep you posted
The problem still exists... The only application I have installed/used is PIMBackup.
So I am going to restore the phone once again and NOT use PIMBackup to see if it makes any difference...
Hasn't anybody got any suggestions for me?
I really need them.
Thanks,
Colin Jensen
I don't know if anybody else has experienced this... maybe it is just my ROM.. I am using the O2 WM6..
If I use PIMBackup then it causes all the problems above.
Problem solved(Hopefully).
you can try other roms and see if they have the same problem.
Try one of the more popular ones
like schap's roms or K's roms
Every ROM I've built for my Vogue with the PPG Kitchen (any version) even a totally vanilla one including nothing but the basics has caused my phone to turn off after 4 minutes even though I have the power settings not to turn off on either battery or external power. This only happens with ROMs created with a version of the Kitchen. I prefer those ROMs as they are the only ones in which I've been able to get MSCV to work properly.
I don't want the phone turn off at all unless I do it manually.
Have I misunderstood something or done it incorrectly? Please help, this is driving me crazy. Thanks.
This may help to resolve the root-issue that you referenced in your message.
All credit for the cab goes here.
Best regards,
-boggsie
Thanks boggsie, but I am happy with everything on my phone now and don't want to deal with a different ROM; I just want fix this turning off issue.
My phone goes to sleep
and does NOT wake up, the bottom row of buttons and keyboard both light up if I open them or press them.
Help please!
rossle12 said:
My phone goes to sleep
and does NOT wake up, the bottom row of buttons and keyboard both light up if I open them or press them.
Help please!
Click to expand...
Click to collapse
Stock ROM or custom? Any overclocking?
The phone powers up if you soft reset, correct?
Well, I found out it was a small problem with the rom.
It was a custom rom, and I just installed a different one and it works flawlessly.
With the other one, the light sensor did not work either.
Also, I dropped my phone the other day, and a really small spring fell out.
And the back plain on my screen is loose and opens up easily..
Which ROM?
I hate to hijack this thread but i am having the exact same problem. Basically when i put my phone to sleep its hit or mess as to if it will wake. It seems to have started when i flashed Energy ROM. It was terrible after that, so I switched back to the stock ROM available from the HTC website and all seemed well at first. Now its back to hit or miss.
I cant really rule out a hardware issue such as a broken sensor or something because I'm not sure how the mechanics of it work. When i push the power button on top the phone wakes but not the screen I know this because the 4 lights on the bottom light up and the keyboard as well. I can hit the button repeatedly but it doesnt help. At other times it works flawlessly, but usually does not.
Can anyone give me a suggestion as to what it could be, or a way to rule out a hardware issue?
Exactly my problem!
It was perfectly fine for the first day or so before it started crapping out again..
Can someone please help us with this problem?
It's mind consuming and it's making me worry.
Until TP3 is out, I won't get a new phone ):
Well, the problem is discussed in great detail on the internet, but no one can give a definitive answer. ..
I've been a touch pro 2 user for exactly 3 days... My new HD2 from T-Mobile is in the mail... This is a un acceptable flaw with no real solutiion... Good Luck TP2 users....
Good luck to you.
I've had mine for over two years and it was flawless
Just one recent drop determined everything
Although I Must say, it was one hell of a durable phone
Yea, dont get me wrong. I really like the phone. Thats why I'm getting the HD2. Great OS and big beautiful screen. I'm gonna miss the slide out keyboard but I think thats what breaks these phones.
I'm excited that there's the possibility of running Windows Mobile 7 on it.
rossle12 said:
Can someone please help us with this problem?
Click to expand...
Click to collapse
I'd like to try to help. But you never answered my question of what ROM you are on (and which one you tried previously).
I've determined my problem is 100% hardware related. If I open my keyboard and then grab the screen and tweak it while pressing the power button it comes onn 100% of the time. Sux, but at least I know the cause now
djowen6565 said:
I've determined my problem is 100% hardware related. If I open my keyboard and then grab the screen and tweak it while pressing the power button it comes onn 100% of the time. Sux, but at least I know the cause now
Click to expand...
Click to collapse
Every once in a while my phone would turn on and I wouldn't know why
But yeah, I think it is hardware related.
I previously used Energy then went to Jacko's.
Both were perfectly fine, just the upsetting sleep function and light sensor would keep the phone off.
HELP: Same problem Phone not waking up
Hi saw this thread and was wondering if anyone can help me.
I have an HTC Touch Pro 2 for some month now...
Using the following details:
OS Version: 5.2.21887 (21887.5.0.86)
ROM Version: 2.07..401.1 (80303) WWE
ROM date: 02/04/10
Radio ver: 4.49.25.91
stock ROM basically...
THe issue is that the phone doesn't wake or when using it just freezes/hangs.
Not much software/apps installed... and memory is good as well.
I just don't know what's going on...
Help please.
Thanks
rossle12 said:
Every once in a while my phone would turn on and I wouldn't know why
But yeah, I think it is hardware related.
I previously used Energy then went to Jacko's.
Both were perfectly fine, just the upsetting sleep function and light sensor would keep the phone off.
Click to expand...
Click to collapse
I'd agree with the notion that its likely hardware related. I've flashed maybe 10 different builds of Energy over the last 7 months or so, and never once had and issue with the SOD (sleep of death) that I can recall. A bad flash can sometimes happen. But since you flashed another reputable ROM (Jackos), that somewhat eliminates the possibility that a bad flash is the culprit.
You can start from scratch, by running Task29 to format the ROM area of the phone's memory, and reflash the ROM. But this would be just to eliminate the possibility of a bad ROM flash. My gut says that you won't see any different results.
Running the phone "clean" for a while (to see if you still have the SOD) without any software installed or any other modifications will eliminate the possibility that any software or mods are responsible for the issue.
are you sure its hardware related? because my phone started doing this yesterday too...I had an energy rom from october, and it was really buggy. I am only able to keep my phone from sleeping when it is plugged in to some power, so i flashed the newest energy rom and still having the same problem...wont wake up from sleep
EDIT:
I dont see how this can be hardware related because everytime i soft-reset, the screen works again. this problem only happens when the device goes to sleep...
Any overclocking?
As I already mentioned, I never had any SODs on Energy that I can recall, except when using OCT (OverClocking Tool).
I have done no overclocking...I just flashed the newest energy rom like 15min ago...is there anything else I can do or check? it looks like the phone works still, just no backlight...
After flashing the ROM, maybe try running it "clean" for a day or two, don't install any software or do any mods, reg edits, etc. If you still have problems with the phone waking up with a new ROM, and no other software or other mods, than it may indicate a hardware problem.
And be sure to run Task29 before you flash the new ROM, if you don't already do that.
You guys should read the following thread:
http://forum.xda-developers.com/showthread.php?t=648134
You're not the only ones (by any means) with the SOD issue. But it isn't at all clear what causes the issue. Lots of different theories in that thread about various software or ROMs, with no clear solution.
Lots of conflicting info, but some comments on the thread suggest (as I mentioned) that Task29 may help (certainly can't hurt).
moto2000 said:
are you sure its hardware related?
Click to expand...
Click to collapse
Nope, definitely not sure, especially after reading the thread linked above. But as I suggested before, Task 29, try a different ROM, and run it clean with no software or mods, and start eliminating the variables.
every other time my phone rings I cant answer it. The accept button just wont move?? is it just me or have anyone else had this error I have a dezire z
Do you have set CPU set to 245MHz @ screen off?
no i dont, why?
Well that could be one cause, maybe it's a bad app causing your phone to temporarily freeze? Can you slide it the other way and ignore the call?
Did you try flashing a different kernel?
Sent from my CyanogenMod powered G2.
Utorrent76 said:
Did you try flashing a different kernel?
Sent from my CyanogenMod powered G2.
Click to expand...
Click to collapse
why do you suggest this? how do you know hes using kernels? im just trying to see what your connection to the solution is -its quite a specific answer to a problem that hasnt really been examined. what rom is he on, etc before you can start talking about kernels -- so can you clarify?
accept button - do you mean the slider? if you have cmod - just activate settings to disable lock menu/trackball/ whatever --also you could try the no-lock unless you have security issues.
if no cmod -- theres apps to reduce the lockage -- that may help you get your phone calls but still doesnt fix the problem? you could try enomther's and his awesome extra ssettings app has all those options
Thanks for your help, well it is my wifes phone and it is fresh from the store, just a bunch of apps installed.
I will try some things and see if i can figure it out. And yes it is the slide button, can that be switched for a push button, Is it theme based or in the dialer?? hope you understand what i say.
jaypeg123 said:
Thanks for your help, well it is my wifes phone and it is fresh from the store, just a bunch of apps installed.
I will try some things and see if i can figure it out. And yes it is the slide button, can that be switched for a push button, Is it theme based or in the dialer?? hope you understand what i say.
Click to expand...
Click to collapse
If its a stock DESIRE Z and not a G2 then I think it's safe to assume its got sense on it and not AOSP. Did you try hard resetting it? (power down and pulling the battery for at least 30 sec) other than that id check for any OTA updates in the settings menu. OR if you're willing/know how, you can root it and run CM or virtuous. Both ROMs are excellent. If you do that and the problem persists, it could very well be a faulty unit. You have a lot of options!
I found I had problems answering calls when I had a specific make of screen protector on the phone. As soon as I took that off and went back to a previous one I'd used then it was fine again ! It's a long shot, but I thought I'd throw it in there.
Problem solved, An update did the trick, thanks for helping out my friends,
same problem , cannot answer with swipe keys
I have the same problem, which update did you use
same problem , cannot answer with swipe keys
I have the same problem, which update did you use
I apologize if there is any easy fix for this or if there's already a thread, but I just recently started having this issue for about a week. Sometimes, when I turn on the screen it will quickly light up to the lock screen, but then turn blank right after; before I even get a chance to unlock the phone. The capacative buttons will completely stay light up and when I press them they vibrate so I assume the screen is still active.
Is this a common issue and is there an easy fix? I'm running the latest CM7 nightly build 258. I don't think that's the issue though because I just upgraded it today and before I hadn't upgraded the Nighly Build ROM in a couple weeks. I upgraded it today just to see if there was something wrong with that build.
Has anyone else experienced this?
Restore your previous ROM save
graymonkey44 said:
I apologize if there is any easy fix for this or if there's already a thread, but I just recently started having this issue for about a week. Sometimes, when I turn on the screen it will quickly light up to the lock screen, but then turn blank right after; before I even get a chance to unlock the phone. The capacative buttons will completely stay light up and when I press them they vibrate so I assume the screen is still active.
Is this a common issue and is there an easy fix? I'm running the latest CM7 nightly build 258. I don't think that's the issue though because I just upgraded it today and before I hadn't upgraded the Nighly Build ROM in a couple weeks. I upgraded it today just to see if there was something wrong with that build.
Has anyone else experienced this?
Click to expand...
Click to collapse
Are you using a custom kernel. If so are you under / overclocking or over / undervolting?
Nope. I'm running whatever kernel comes with the ROM and no undervolting or overclocking either.
Anyone....?
Have you done a restore?
I would try wiping dalvik-cache and the cache partition. If that dosent work i would wipe everything and do a fresh install of a different rom to determine weather it is rom related or hardware related.