Sound problem, any ideas? - 8525, TyTN, MDA Vario II, JasJam ROM Development

Hello people, I really need your help with this one..
I have the o2 XDA Trion, with their OEM firmware of WM6. Everything was working fine, but just recently when ever the screen goes into standby(Turns off which ever jargon you may use) then no notifications will happen; however if the phone is active.. with the light on then all notifications happen fine.
I have just flashed the firmware again last night using the softkey and soft reset.. then I installed VJToggle(For buttons on today screen), Rltoday, SL2U(Apple slide locking program).. it still does it! I removed each application and still no joy.
I am starting out with an absolute clean install this morning and hoping that my problems are resolved.. has anybody have any ideas?
I will keep you posted

The problem still exists... The only application I have installed/used is PIMBackup.
So I am going to restore the phone once again and NOT use PIMBackup to see if it makes any difference...
Hasn't anybody got any suggestions for me?
I really need them.
Thanks,
Colin Jensen

I don't know if anybody else has experienced this... maybe it is just my ROM.. I am using the O2 WM6..
If I use PIMBackup then it causes all the problems above.
Problem solved(Hopefully).

you can try other roms and see if they have the same problem.
Try one of the more popular ones
like schap's roms or K's roms

Related

Phone dial, ending call, etc.. problems.. Am I the only one?

Hi forum!
Before anything, thanks for your invaluable help and support, without it I would feel even more lonly on my PPC life
OK, said so...
I'm having currently some problems with the phone part of this great device. Sometimes when I answer a call (with the hardware key) it takes 2 to 3 seconds before I can hear anything from the person calling me. The same happens when I hang. It takes time to hang the conversation, so I never know if it's really hanged..
Lately I'm having also problems with the "today" app I think. It never shows up and the upper bar (status?) does not change when I receive a call.
I went trhu a hard resseting and restore (Sprite) process 1 week ago, but I had the phone problems before that...
Thanks a lot for your help.
by the sound of it, you have upgraded to the wm5.0 rom, i have these problems also, until there is a known fix for the minor bugs, with the today screen you can just go into settings and today, then come out again, and what wasnt there before should be there now, also , have you tried to upgrade the radio rom too??? 8)
thanks for your answer! But I'm currently using wm2003. Though I'm considering switching to wm5 now we can if I don't get a solution to this
I normally use the phone for work-job and this minor things annoys me big deal!
joey jojo said:
by the sound of it, you have upgraded to the wm5.0 rom, i have these problems also, until there is a known fix for the minor bugs, with the today screen you can just go into settings and today, then come out again, and what wasnt there before should be there now, also , have you tried to upgrade the radio rom too??? 8)
Click to expand...
Click to collapse
heelp
PLease, someone help!

Help My Camera Doesnt Work Anymore...

Think the camera on my 8525 was working fine lastly before i downgraded my Radio to 1.40...I have tried updating firmware n number of times still the camera wont work...Hardreset softreset nothing is bringing the camera back...tried 3rd partycam tools and it launches and disappears in a sec... searched the forum and looks like im the only one...
Anyone have any suggestions ? do you think i burnt my camera or something?I do have an option to get it sent back..but wanted to see if someones suggestion here helps fix it so others can learn from me...
It was on black 3.01 when it was last working and tried everyones roms after it didnt work..
thap143 said:
Think the camera on my 8525 was working fine lastly before i downgraded my Radio to 1.40...I have tried updating firmware n number of times still the camera wont work...Hardreset softreset nothing is bringing the camera back...tried 3rd partycam tools and it launches and disappears in a sec... searched the forum and looks like im the only one...
Anyone have any suggestions ? do you think i burnt my camera or something?I do have an option to get it sent back..but wanted to see if someones suggestion here helps fix it so others can learn from me...
It was on black 3.01 when it was last working and tried everyones roms after it didnt work..
Click to expand...
Click to collapse
Ok its fixed now... Dont know what fixed it... maybe the constant upgrade of roms or the ppcreset... or pulling the battery out and leaving it for 10 mins... But finally i dont have to send it in for a refurb... Thanks for anyone who looked and thought of a solution... If anyone else has this again they can try all the things i tried...
1) Upgrade/ Downgrade Radio multiple times.
2) upgrade SPL multiple times.
3) Try all the cooked roms
4) Revert back to ATT wm5 rom.
5) Reset device with Reset PPC
6) SuspendPPC (These i found in the black rom under system Folder)
7) Pull the battery out for 10 Mins.
Hopefully something in this combo works... cant point out which since i did too many things...
This forum is great with info available here Thanks to all the chefs,the guides and WIKI.
Cheers...
Disappearing Camera? Me Too.
My Camera Disappeared a few days ago, the hardware button on the spine does not bring it up and the application does not run, it just brings up the photo viewer. I even run the exe and get nothing. Also note, "Brighter Screen" does not work nor "Bigger Screen". For the record it's a Hermes100 and its running ROM Pro BLACK 3.0.1 and Radio 1.41.00.10.
I am looking all over, but I can't find anyone with the proper solution. May I should take my Cingular 8525 back and see what they say, they are probably going to say it was my fault when they see the new radio and Rom, but the problem happened with the original ROM.
ggreci said:
My Camera Disappeared a few days ago, the hardware button on the spine does not bring it up and the application does not run, it just brings up the photo viewer. I even run the exe and get nothing. Also note, "Brighter Screen" does not work nor "Bigger Screen". For the record it's a Hermes100 and its running ROM Pro BLACK 3.0.1 and Radio 1.41.00.10.
I am looking all over, but I can't find anyone with the proper solution. May I should take my Cingular 8525 back and see what they say, they are probably going to say it was my fault when they see the new radio and Rom, but the problem happened with the original ROM.
Click to expand...
Click to collapse
Did you do everything i mentioned above?
try different combinations. I had the exact same rom and radio as you...
when i downgraded the radio it took the camera out for some reason.
If i were you i will try different things before the last option of sending it back for a refurb.
Good luck

Anyone have no vibrate in new WM6 roms?

Hi All
Since the release of the official WM6 roms I have tried both the Dopod rom and VP3Gs AT&T rom and with both I have trouble getting the vibrate for incoming calls, SMS and emails to work.
On the Dopod rom it was intermittent, changed to VP3Gs rom and now it doesnt work at all. Never had this problem before.
Im using PhoneAlarm, have tried various different versions fom the official release to several of the most recent betas and still no vibrate. Dont think PhoneAlar is responsible.
Read all the other threads and no one else seems to have mentioned this so Im wondering if its just me.
Cheers
Rob
Sounds like its just you..sorry
robt2379 said:
Hi All
Since the release of the official WM6 roms I have tried both the Dopod rom and VP3Gs AT&T rom and with both I have trouble getting the vibrate for incoming calls, SMS and emails to work.
On the Dopod rom it was intermittent, changed to VP3Gs rom and now it doesnt work at all. Never had this problem before.
Im using PhoneAlarm, have tried various different versions fom the official release to several of the most recent betas and still no vibrate. Dont think PhoneAlar is responsible.
Read all the other threads and no one else seems to have mentioned this so Im wondering if its just me.
Cheers
Rob
Click to expand...
Click to collapse
Just tried on my Vodafone 1605 with Dopod ROM - working fine.
Not here
tried them all, never was an issue here
======
My Vodafone V1605 has lost vibration after upgrading to Dopod ROM. I'm also having problems with keyboard (sometimes, none of the front buttons work, but side ones work fine), and sometimes screen gets white, and comes back when you switch off and on.
I didn't know the cause, so I went back to an HTM WM5 rom, and to ATT or Black Satin, with no success.
any ideas?
robt2379 said:
Hi All
Since the release of the official WM6 roms I have tried both the Dopod rom and VP3Gs AT&T rom and with both I have trouble getting the vibrate for incoming calls, SMS and emails to work.
On the Dopod rom it was intermittent, changed to VP3Gs rom and now it doesnt work at all. Never had this problem before.
Im using PhoneAlarm, have tried various different versions fom the official release to several of the most recent betas and still no vibrate. Dont think PhoneAlar is responsible.
Read all the other threads and no one else seems to have mentioned this so Im wondering if its just me.
Cheers
Rob
Click to expand...
Click to collapse
Yea i did initially...i applied to com button/vibrate cab and it fixed it after a full reset (hold power button down to turn off the device)
i'm using vp3g's rom
|oLo| said:
Yea i did initially...i applied to com button/vibrate cab and it fixed it after a full reset (hold power button down to turn off the device)
i'm using vp3g's rom
Click to expand...
Click to collapse
Well, for no apparent reason its seems to have started working again during the day today. Still dont think its that reliable so I'll try the com button / vibrate fix cab if I can find it.
Thanks for the replies folks, I shall investigate further . . .
Rob
I switched to the official ROM, and vibrate was working initially, but just like you it has stopped working. I'm going to try the above method, but please post if you find the proper fix.
I had to add the vibrating cab to my 8525 with vp3g 3.0. Funny thing is, I'm sure his hybrid had vibrating included. I don't remember-- Senior moment!
whatledog said:
I had to add the vibrating cab to my 8525 with vp3g 3.0. Funny thing is, I'm sure his hybrid had vibrating included. I don't remember-- Senior moment!
Click to expand...
Click to collapse
yea it did...what i remember was that when i pressed and held the com button...the vibrate icon showed up but it did not vibrate like it use to and i tested it several times. The com/vibrate button cab can be found all over the place and i'm sure it's on the wiki here somewhere...or it could be a coincidence that the described method worked
Hi robt2379,
Did happened to me couple of times with Rom updatings.......try to tap at the bottom of your pda between the IR and the USB port..it fix mine.
Good Luck.
syaah said:
Hi robt2379,
Did happened to me couple of times with Rom updatings.......try to tap at the bottom of your pda between the IR and the USB port..it fix mine.
Good Luck.
Click to expand...
Click to collapse
I lost my vibration alert too.., tried above trick. no luck.
I think I'll try the vibrate cab, should I?
currently using Sleuth v2.1 ROM.
Hi guys,
For info; Chk this thread,
http://forum.xda-developers.com/showthread.php?t=294307
Hi
I do have the similar problem with the vibrate after upgrading to wm6.
I have tried to re-install the ROM again but it still does not vibrate.
Any kind soul can advice?
I was having the same problem but i knew it wasn't any software. I think there's some problem with the vibrator as in the hardware. I sent it into the service center and they replaced it for me. it was a faulty vibrator. So its all good now. The VIBRATOR works now... lol.. that sounds soo wrong...
Hi Bernard,
That's wonderful... i will be going to the service center soon hope they are able to replace one for me ...

[WTF] Messaging on wake up...

Hey there
Can somebody help me?
I have flashed Duttys 6.5 R8 recently and everytime I wake up my phone (or even turn on) the messaging app displays...what is this? it is annoying...
Thanks...
Sopis said:
Hey there
Can somebody help me?
I have flashed Duttys 6.5 R8 recently and everytime I wake up my phone (or even turn on) the messaging app displays...what is this? it is annoying...
Thanks...
Click to expand...
Click to collapse
Do you have any 3rd party apps installed or is this on bare rom? Do you mean it opens on message tab?
If on bare rom, your query should be directed to Duttys rom thread.
thx for reply
it is almost clean ROM..I installed just a few things that I usually install and these are definitely not causing this...it has never happened before with the same apps..
second thing....it does not open on the sms tab but it opens outlook...or whateer is this app called in winmo..SMS/MMS or email..
i dont understand this...I have no unread messages...it hsa never happened before...weird problem...
I will flash R9 on weekend if it will be out already..
if someone has solution or experience the same problem please let it know...
thanks
Start>Tools>Tom Text Messaging> SMS wake up Event
what does this function do?
may this setting is relevant to you problem!
not sure.. not tried yet.. but this what came to my mind.. when i read ur post!
thanks for your reply..
this is the same option as was in the hd tweak...when sms comes phone awakes...does not solve my problem..
but thx anyway
Could it be that you didn't setup something related to messaging and the app always starts to force you?
Is sms working?
I actually didnt do anything..
I just noticed that when I press the poewr button to wake up my phone i see the outlook screen..
it it so annoying...
After I flashed R9 this happens much less...but it is still there
Has anyone encouncetred something liek this?
i am having the same issue you are. i have a touch pro though and i am even on a different os build then u (maybe a lingering 6.5 bug) . it is very VERY irritating so if anyone has a fix i would appreciate it as well
Check
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL\DisableSMSWakeUpEvent
value should be 0
that solved it for me
i had a lot of sms-problems with Dutty's ROM.. i'm now on EnergyRom, and not having any problems at all
Finally someone who has this issue..I thought that I am starting to be paranoic or what
Will try your suggestion with the Registry Key although that doesnt seem to be the root of the issue...
Will try it out...
Thanks..
OK...now the problem really seems to be gone.
I have disabled automatic download of emails..weird...

NO SOUND, NEED TO RESET ALWAYS!!!!! Help Please

Hello,
I have been using Touch Pro 2 from last 7 months. Around 4 moths back i upgraded to Win 6.5. After that i am facing a particular problem. Sometimes i get an error of "Device.exe" and then all the sound from the phone is mute.It doesnt play any sound and even if i answer/make a call, i cannot hear the other party's sound or even when their phone is ringing. There is only vibration. I tried using it with headset, and there is absolutely no sound. After resarting the phone everything is fine. But the error appears the very next day or the day after that, and i just restart the phone. I tried Hard Reset and installing the official ROM from HTC website, still the problem persists. The only software i installed after replacing the ROM were NetCF3.5 & Advanced Configuration Tool v3.3 only. I highly doubt if it causes this problem as i was using it in Win6.1 when i bought the device.
The people at HTC downgraded my device to Win 6.1 and asked me to use it for a week and see if the error comes. I am using it for almost week, and the problem is not there.
Can someone suggest what the problem could be, as i dont like 6.1 as i am now used to 6.5. I dont think HTC will be able to help me soon. Someone please help me in this case.
REGARDS.
Hi, I had a similiar issue with my tilt 2 that I finally figured out was linked to advanced config tools. Specifically the changes I made in the sounds settings. For some reason this muted my microphone and speaker. After changing back those settings to default the problem was resolved. I am running 6.5 on my phone. Hopefully this helps you out.
ehaas13 said:
Hi, I had a similiar issue with my tilt 2 that I finally figured out was linked to advanced config tools. Specifically the changes I made in the sounds settings. For some reason this muted my microphone and speaker. After changing back those settings to default the problem was resolved. I am running 6.5 on my phone. Hopefully this helps you out.
Click to expand...
Click to collapse
YOU ARE RIGHT buddy... i was doubting on Advanced Config only..... but i did not made any changes to he sound, i use it for unthreaded messages only...but this time i did not install it, i got the unthreaded sms patch from HTC and installed it, and till now i did not face the same problem, it almost 3 complete days of my usage.....
now i am sure Advnced config is the culprit....
Few more people are having the same problem in my country(UAE) and have complained at HTC, i shall inform them about this...or lets wait for another 3 days to make sure that this problem does not occour.
THANKS A LOT
I had some similar problems with the advanced config running the stock rom with the att tilt2. I've since banished that program from my phone.

Categories

Resources