I got this "ERROR 100: MODEL ID ERROR",... pl help
I try to upgrade XDA2 rom from "ruu172104wwe_t-mobile-uk" to "XDAII_172181_Final" and I got this error "ERROR 100: MODEL ID ERROR"
How can I slove this problem?
First I have O2 rom and I upgraded to "ruu172104wwe_t-mobile-uk", when I try to upgrade to "XDAII_172181_Final" everything look fine till the error occur I can open my O2 anymore on the screen show just message "serial v1.03"
Please help,.. Thank
i'm assuming you have a wallaby?
try reflashing using sd method.
dl nb1 file from kitchen
use xda-rools to write nb1 to sd
insert sd into wallaby
press pwr button and reset at same time
good luck!
Thank you for suggestion, but I'm very new for O2.. and I use XDA2
Could pl explain more,... how can i get nb1 (where is kitchen) and what's xda-rools? does it will work with XDA2?
sorry to ask boring question but i really dont know.
you are using O2 XDA2 ,right! do a "cleanjumper" , if you want update , under you use a t-mobile rom, the easy way!!
Hi guys,
New here so please be gentle. I have an Orange SPV C500:
Typhoon
IPL 1.00
Typhoon
SPL 2.00.0012
Typhoon
And so more info. I have the WM5.0 ROM and followed the instructions, load MTTY hit enter and up pops the CMD> prompt type l c:\john.bin being the filename of the ROM (where should this be saved, locally in C:\ on my drive) and all I get is this error message:
clean up the image temp buffer at 0x8C080000 Length 0x01B00000
MTTYDownloadImageNot allow operation!
Error : DownloadImage return error (code = 0xFFFFFFFF)
Having done various searches and reading some posts I can't really work out what the problem is. If someone could point me in the right place to either read something or tell me I would be very grateful.
My SPV is the one with the version 10 media player.
Many thanks, John
hi
where did ypu get the WM5 rom>?< if you tell me where to get it,i will try it and maybe i could help you you can send me a message with the rom link if you want,
lee J
Hello everyone, i hope someone knows what the hell my JasJar bootloader have, since i'm trying to flash my device without success.
I've searched everywhere in the forum but found just a message with no reply.
First of all, i've unlocked my jasjar, it's now a superCID device. Or well, i guess so, since i can exec lnb commands.
Here you are the "log" from mtty:
-------------------------------------------------------
USB>task 32
Level = 0
USB>info 2
HTCS00000000 î¢-HTCE
USB>lnb c:\image.nb0
:F=c:\image.nb0
:A=70100000
:O=00000000
:L=FFFFFFFF
start NB image download
Fail to synchronize with the host (1)
USB>
-------------------------------------------------------
Using the "l" command jasjar hangs and MTTY claims a timeout in \\\wcehUSB1 or something after 5 minutes.
Any idea? I've tried with USB2 and USB1.2, tried differend PC models and differend baud but nothing change.
The "info 2" returns a strange SuperCID message. 2 bad.
Any advice is appreciated!
----------Refresh------------------------
I've also tried to upgrade bootloader to v1.1 but still have same issues...
Error 114 when upgrading Radio an Vodafon V1640 (Spain).
Display "No GSM". No IMEI. No version Protocol...
Windows Mobile (CE) Run OK and Upgrading this OK.
Extended ROM run OK and Upgrading this OK.
The CID is Locked:
in mtty.exe:
USB>task 32
Level=FF
USB>
Impossible Mission upgrading all ROMS Radio (including Room of Buzz, 0.00.0 and the rest 1.04, 1.06, 1.08, 1.09, 1.11, etc etc).
And I Exec the tool of Buzz from the HTC Universal, it DOES NOT WORK.
I have tried everything. ...¿¿¿ Exists some solution for this problem ???
Hi, which method have you followed to upgrade your device?
(Excuses for my bad English)
I have a Vodafone V1640 (Spanish) and unlock this with the tool of Buzz, (From Radio original version 1.09 TO Radio version 0.0.0.0). Soft Reset, and exec the Unlocker of Buzz from my HTC.
Up to here all OK. YES, I work the unlocker. All OK.
But, later 4 or 5 days, and various soft-reset and one hard-reset, I have a next message on the display at reboot:
"No GSM",
and not recognize my SIM Card, and not have IMEI, and not have Protocol...
In addition, either, I can not install other Radio ROM, because i have the next error:
ERROR 114 RADIO ROM UPDATED ERROR
this with all of radio roms possibles (1.03 , 1.04, 1.05, 1.06, 1.08, 1.09, 1.11...)
Desperate, also upgrade the Bootloader (from the original 1.00 TO 1.01)
All equal, Same error.
After 3 months I have seen that there is people who happen to him just like to my, but with other models of HTC (ex. Hermes), Unfortunately , I believe that there is no solution for the HTC Universal .
I believe that my error was no upgrade later the special radio 0.00.00 TO Radio 1.11 for example, AND Upgrade the Bootloader 1.00 TO 1.01 .
Now that the situation is this:
- The Radio does not work, ¿¿Is corrupted, Broken??
- I cannot update the Radio (Error 114)
- Wit the tool mtty, type:
USB>task 32
Level=FF (Not SuperCID !!!)
USB>
either, now, the tool of Buzz does not work ( it works, but it does not do anything ) .
This user have the same problem:
http://forum.xda-developers.com/showthread.php?t=289260
And the This classification I have Type 1a :
http://forum.xda-developers.com/showthread.php?t=286755
but this is for HERMES , Not for HTC Universal, I proved it but it did not work .
Please, can yo help me? ¿¿has solution this disaster for HTC Universal (Vodafone V1640 Spain)?
Excuses for my bad English!!
¡¡and thanks for any answer!!
Ok, let's see ... what I really meant was are you upgrading with your device in "bootloader mode" or once WinCE is booted?
If you're doing it with the WinCE already running, please try putting your device on bootloader (Power+Light+Reset) and run again Buzz's unlocker (with Ma_UpgradeNoID.exe).
If this method doesn't work take a look to this thread:
http://forum.xda-developers.com/showthread.php?t=289260
It talks about reflashing your radio using an SD image dumped from another device, this could harm your Universal...so don't blame me!
Currently there's not radio dumped in the ftp so I will try to get it tonight or maybe tomorrow, I have installed on my device 1.14.10.
Hope the first method will work!
thank you very much for the answer...
Please, you could explain to me like flash the radio with a SD Card (step by step).
I have all the Radio Roms, but never I upgrade by the SD Card, (the format that must have, etc etc). Always I upgrade flasheado by USB.
Thanks
And I have read if the CID is Locked (is my case) it will not work either because he command "lbl" from mtty.exe it not work .....
Oh mon Dieuuu (
Ok, the dumped Radio rom 1.14.10 it's now here.
I have never perform this, but as far as I understand you have to make a raw copy of my dumped image to a blank SD card, insert it on your device and get into the bootloader.
Wait some seconds and something will be written on your display, just asking to press power to begin with the flashing.
But again I'm just guessing....
BTW, I did the image file using linux command 'dd' so if you use linux as well it should be easy to restore it to an SD card. Sorry I can't tell about windows.
Good luck!
thanks , I download the file, and to copy a my Sd Card with ntrw.exe
F:\>ntrw write Universal-radio.img j:
NTRW v2.00
Removeable media
Cylinders: 0:62
TracksPerCylinder: 2
SectorsPerTrack: 63
BytesPerSector: 512
bufsize is 65536
63569920 bytes written
ALL OK, (my SD Card is the 512 MB). Input the Card in the device, soft-reset, enter the bootloader... and Not Run. ¿?¿?
Any have idea? that I make bad?
I will continue investigating….
Help, How to Load the Rom by SD Card?
Help, How to Load the Rom by SD Card?
In mtty 1.42 and 1.16 , the command s2d
Level = FF
USB>s2d
Invalid command : s2d
For a help screen, use command ? or h
USB>
Howto load the ROM from SD Card to the device?
And with the format?
Please help, this is my last hope...
Hmm maybe I did something wrong....may I assume you're Spanish? If so please feel free to contact me privately and I could send you my little 64MB SD card, I have tested it and works, I mean I didn't flash my device with it but I've seen the option to do the flashing
as far as i know the card MUST be 128mb (taken from the service manual and my personal experience)
Midget_1990 said:
as far as i know the card MUST be 128mb (taken from the service manual and my personal experience)
Click to expand...
Click to collapse
I thought it was more a matter of space than a real requirement cause I just dumped the full radio (~16MiB).
Could someone please confirm this?
Thanks.
I obtaining a card of 128 MB and I have repeated the process.
F:\>ntrw.exe write uni.img j:
NTRW v2.00
Removeable media
Cylinders: 0:15
TracksPerCylinder: 255
SectorsPerTrack: 63
BytesPerSector: 512
bufsize is 65536
63569920 bytes written
F:\>
I enter bootloader with the sd card and it does not pass anything.
Not to be because the security level is Level = FF (and not is SuperCD) ???
From mytt, type task 32:
USB>task 32
SD:Waiting for card insert.........
CMD3 for SD, it's OK, ready to get RCA from response.
SDetected one card
SD:ready for transfer OK
d.total_lba=3BF00
d.block_size=200
d.RCA=1
d.drv_type=40000000
d.busWidth=1
Total card size=77E0000
Wait interpreter timeout
Level = FF
USB>
Tripledes, I have sent you a private message
tomsan said:
Tripledes, I have sent you a private message
Click to expand...
Click to collapse
I have the same problem of "no GSm",could you please send me the massage too. Thanks
no GSM
thanks you guy! I have step by step, and when I updated by sd card, the screen show me "sections=1 not allow update". who can give me more advise,
I have same problem.
the rom headers r differrent..u need to copy the headers.I know that for a ce rom first 416 bytes r to b copied..for radio i don't know..may be someone can tell here
tecumseh said:
I have the same problem of "no GSm",could you please send me the massage too. Thanks
Click to expand...
Click to collapse
Hello,
Same problem here, http://forum.xda-developers.com/showthread.php?p=3187581#post3187581
Did you solved??? How
Rui
Another Rom for Artemis italian user.
This is a new way of install ROM and can be installed ONLY if you have a Micro SD with almost 30 Mb free space.
In Rar archivie there is the nbh file (the Rom) and a file called "Setup".
1. Copy file "Setup" in your SD
2. Flash the rom (remember you must have SPL unlocked).
Don't delete Setup from SD: it's impostant if you make Hard Reset.
Core wm: CE 5.2.1620 (Build 18124.0.4.2) from original HTC WM6 Professional Ita
SplashScreen
SHDC e GPS Photo ready
.........and more.
Italian user can read more on this forums: A1Ktyle - SoloArte
LINK DOWNLOAD RAPIDSHARE
Thanks mate, testing your great work, bye
P3300
My HTC3300 was dead, only can load into Three-color Mode with USB avaliable. I tried all kind of RUUs, including the Original ROMs(English, French, Deustch....)and the newest version , all report ERROR[300]invalid update tool. then the screen of phone stayed in 0% and RUU tool exit only...
IPL 1.27.0001
SPL 1.11.0000 (used the USPL to unlock CID before)
Before Bricked, I successfully updated many versions of ROM, and the last operation is WM6.1.
I'have try this with MTTY:
Cmd> set 32
Cmd> password BsaD5SeoA
Cmd> ruurun 0
Cmd> ResetDevice
But Doesn't work!
because of you!
My phone was perfect before and I have installed your BigiX.
What I have to do? Can U help me?
I can donete some money... pls... help me....
My dear friend,this is an old rom.
But this is not the reason of your problem.
I don't know if MTTY works on this device, but if your screen show 3 colors you are in bootloader mode (and your SPL is 1.11.0000 as you tell, so it is good for flash any rom).
So (in teory) you can connect PPC to PC via USB and run RUU for flashing the rom you want.
In alternative you can flash original rom.
For this operation i suggest Win XP+ AS 4.5 and try to change usb cable (a new one) and usb port (another on your PC)
I hope you can resolve.
No need donate money
Thx, but are 3 days that I'm looking for solution... Lot of people have the same problem. When run RUU flashing after 3 colors bar, the phone start to flashing but is stopping at 0% and the software report ERROR[300]invalid update tool.
I can connect only with MTTY but I'm looking fore some command that can force to send RUU at the fone. For example "send" in telnet. But nobody know how to do this...
If someone have an idea, lot of people will be very very very happy!
And hope gratful
You can try with rom flash from SD card...
Are you italian??
You can found all the info in this website -> Clic here!!!
Yes, I'm Italian.
I'll post this question to that site.
But I think that is possible to force installation of RUU with MTTY.
My problem is that when I have used start_uspl.exe at blank screen was blocked and I have removed battery.
After this my phone is blocked with 3 colors bar and when I try to update, it start but only at 0%
I need to know all MTTY commands
I don't know if MTTY work with P3300, try with the flash from the SD card directly from the device...
This is the link of the discussion...... Click here!!!
Try don't cost anything....
obviously I have try a lot of times... But doesn't work!
I have try to rename in ARTEIMG.nbh and in a lot of different name but when I powe the phone it say Checking SD contents but nothing happen....
I would like to find a command to force reading of SD and writing to the Phone... but I think is not easy...
Thanks whatever....
Do you try with another SD card?
This procedure is the same that the HTC Service use for repair the HTC device...
Try with another SD card... I have a Kingston 2Gbyte and it work very fine!
I hope your Artemis revive very soon!
I have only 2 SanDisk SD cards. One of 128Mb and one of 2GB.
I have tryed with both. With Fat16 and Fat32 but nothing happen...
Sorry for your problems Pinco, I don't have a solution for that but i can strongly recommend another ROM from the great BigX, the one you can see in my signature. OS core seems to be more recent and ROM's almost perfect If you don't have any specific need to use the 2.0, go for Blue-X!
help error 300
what happend any there have solution for this prob