This paquet is a software used by Movistar Spain to lock the phone. If someone want try somting with this info. Here are zip file with : Ril.dll,Phone.dll,SimLock.exe,SimUnlock.exe and some more info.
ican't run it on my japanese t01a .would you please tell how to use it ?
You cant run SimLock and SimUnlock in your phone you haved inside. You can replace them with total comander. But dont touch never ril.dll dont replace with this one. I put here this if someone want help me to crack them.
I litle bit dificult because I never try to crack brograms in 16 bit, 32 is easy. Problem is coming for try to find debuger for 16 bit who work properly.
Step by step but I see one day we go to have a crack for all phone.
Sory man I cudunt help you.
Rest assured it's not likely to be sufficient to fiddle with simlock related .exe files and RIL driver to permanently unlock a TG01.
ril.dll is a module in TG01 ROMs, not a file, so you can't use extracted file on another device, not even on the same device. And more importantly you don't need to, because it's just a proxy to the actual vendor specific RIL driver. Apart from minor differencies, ril.dll is going to be the same in majority of TG01 ROMs.
stepw said:
Rest assured it's not likely to be sufficient to fiddle with simlock related .exe files and RIL driver to permanently unlock a TG01.
ril.dll is a module in TG01 ROMs, not a file, so you can't use extracted file on another device, not even on the same device. And more importantly you don't need to, because it's just a proxy to the actual vendor specific RIL driver. Apart from minor differencies, ril.dll is going to be the same in majority of TG01 ROMs.
Click to expand...
Click to collapse
so we can do nothing about it?if we can do something to cheat the system and then we can unlock our phone?like make the program have no ability to recognize whether the sim is right or wrong.
Stepw furs I want say THANKS for sddl.exe is help me to change evriting from my fuking sspianish vomistar*(movistar).
One time I try to extract ril.dll but den I didnt change eniting just puded back bu with replece the same and then phone is blocked completly. I needed to reset evriting. May be is because the extractor is change someting I dont know. I see today with upgrade ril is change bud the all tre exes simlockn; simlockp and simunlock is stil the same so i think is over there evriting aout unloking TG01. I want try if some one have unloked english orange extrat 3 exe and bud them here and I go change my. We can try just replace blocked with unlocked.
I dont know if you understend what I meen. My English is not very good. Sory abouth that.
*vomit
any luck with unlocking? still no free method?
10x
Hy
It's not working.I try with an orange romania unlocked one to copy to another orange romania locked and didn't work.
I used a cab file to disable security, and then I was able to copy the files to windows but it does not work. (I am with orange UK). Use the file attached to disable security to allow total commander to overwrite files.
Free method to unlock yet?
Hi all,
I was wondeirng if there is a free method to unlock Toshiba TG01. How do they unlock it using the IMEI number only?
Related
Can anyone help me unlock a new (never sim carded) AT&T Audiovox 4100?
Pleas reply to:
[email protected]
Thanks
i would like to help but sory i dont have that kind of device
audiovox 4100 unlock
hey if u want your ppc unlocked email me at [email protected]
cheers.
farasimo ..u have to be banned of this forum ...first u was asking for this same problem a month ago now u have the solution and dont share it and want sell it ?? u are a shame
Well I should be ashamed and I also should be banned. But the thing is I spent on my research I had nightmares trying to unlock my 4100 I spent around 80 bucks trying to find things. Some guy even sold me a file that came from this site. Yes I know stupid. But I was trying everything. And since I did all that work to do this I thought I would try to get my money back. Is that reasonable?
Or is it not?
I give a little I take a little this site looks really good it has lots of information but it doesn’t really support the audiovox 4100 or have much support if any so this site might not be suitable to post this file in .
I guess what I am trying to say Is this site should have more on the audiovox 4100 before u can get anything like that on it. There is verry little help on the audiovox I still need help on mine and I cant get much information everything that I find is for other pda’s
The info is out there u can find it just like I did if u pay close attention. If u are not willing to work for it I think its fare to be charged a small fee. Don’t u think?
Me finding out the solution makes things cheaper or ppl. So isn’t that a little help ?
..
Hi PPC4100 users.
If you guys stop arguing and could help eachother like us HTC users, the PPC4100 would have made huge improvements in the hacking-development-mods-tweaks department.
Here's the requested file.
Just copy over to the Windows directory on the Pocket PC through Activesync.
Good luck!
Rayan
This is a temporary solution and phone goes locked again ..after battery is removed or a reset is done phone..
Anyone with a permanent solution?
bR
There is no permanent solution that I know of...
Just keep a copy of the DLL on a SD Memory Card and reinstall as needed (You will need Resco Backup or similar third party prg for that though, since the included File Explorer does not display dll files since they are system files)...!!!
Better yet... On Windows Mobile 2003 it's imperative to make use of a third party backup and restore program (i.e. Sprite Backup). If one backs up an unlocked 4100 and eventually restore from that backup, the phone will be automatically unlocked again!
Good luck!
Rayan
Help me
Help me unlock it, im use that dll file but i cant use it with my GSM netword
Im from Vietnam and use VN MOBIPHONE
Thank you so much
cool thanks
Rayan said:
Hi PPC4100 users.
If you guys stop arguing and could help eachother like us HTC users, the PPC4100 would have made huge improvements in the hacking-development-mods-tweaks department.
Here's the requested file.
Just copy over to the Windows directory on the Pocket PC through Activesync.
Good luck!
Rayan
Click to expand...
Click to collapse
Thanks a lot
Help plz, PPC4100 unlocking
HI
plz help, I downloaded the files for unlocking the PPC4100, but when I drag the file rilgsm.dll to windows folder ...it ask me to replace, ok...but when it tried to replace it said: Sorry the operation could not be completed because an expected error occured ( Error code -50)...so I tried another way, take the file to my document and try to copy and paste to windows folder trought the pocketpc and it said: cannot copy 'rilgsm': access denied. make sure the disk isn't full or write-protect or the file is used...but nothing of this is happend, all is ok...so plz help
vulcanus2007 said:
HI
plz help, I downloaded the files for unlocking the PPC4100, but when I drag the file rilgsm.dll to windows folder ...it ask me to replace, ok...but when it tried to replace it said: Sorry the operation could not be completed because an expected error occured ( Error code -50)...so I tried another way, take the file to my document and try to copy and paste to windows folder trought the pocketpc and it said: cannot copy 'rilgsm': access denied. make sure the disk isn't full or write-protect or the file is used...but nothing of this is happend, all is ok...so plz help
Click to expand...
Click to collapse
Try to the Copy and Paste.
Hello!
I had an idea to the horrible "simlock.exe" from the blueangel:
We all know that the "simlock.exe" is write-protected in the rom. So i have searched (with Total-Commander CE) in which other files is standing "simlock.exe" too. And i found the "rilgsm.dll". But this "rilgsm.dll" is write-protected too.
Ok.
I searched now the registry and wooow: I found "rilgsm.dll" in "HKLM\Drivers\BuiltIn\RIL" under the String-value called "dll". When I renamed this "dll" to "xdll" (described in much other things under BA-Hacks) the GSM-Phone isn't working.
My solution:
I copied the "rilgsm.dll" to my PC, opened it with Ultra-Edit 32 and found "\Windows\simlock.exe". I wrote now "\Window2\simlock.exe" in this "rilgsm.dll" and saved it as "rilgsm2.dll" and copied this new "rilgsm2.dll" back to the Blueangel under "\Windows". In the registry i wrote under "HKLM\Drivers\BuiltIn\RIL" under "dll" now "rilgsm2.dll" so that the system now will start my modified "rilgsm2.dll". I also made a new directory called "\Window2" and copied the "AddRingtone.exe" as "simlock.exe" in this new directory "Window2".
So now when I reset the Blueangel it works with my T-Mobile-SIM-Card. So now i haven't another SIM-Card from an other provider, this i will test tomorrow.
But maybe someone can use my idea and will build an crack for this horrible "simlock.exe"
Who knows....
==========
Please let me know when you test my idea and when it works or not...
THANK YOU!!!!!
Ischovits said:
Hello!
I had an idea to the horrible "simlock.exe" from the blueangel:
We all know that the "simlock.exe" is write-protected in the rom. So i have searched (with Total-Commander CE) in which other files is standing "simlock.exe" too. And i found the "rilgsm.dll". But this "rilgsm.dll" is write-protected too.
Ok.
I searched now the registry and wooow: I found "rilgsm.dll" in "HKLM\Drivers\BuiltIn\RIL" under the String-value called "dll". When I renamed this "dll" to "xdll" (described in much other things under BA-Hacks) the GSM-Phone isn't working.
My solution:
I copied the "rilgsm.dll" to my PC, opened it with Ultra-Edit 32 and found "\Windows\simlock.exe". I wrote now "\Window2\simlock.exe" in this "rilgsm.dll" and saved it as "rilgsm2.dll" and copied this new "rilgsm2.dll" back to the Blueangel under "\Windows". In the registry i wrote under "HKLM\Drivers\BuiltIn\RIL" under "dll" now "rilgsm2.dll" so that the system now will start my modified "rilgsm2.dll". I also made a new directory called "\Window2" and copied the "AddRingtone.exe" as "simlock.exe" in this new directory "Window2".
So now when I reset the Blueangel it works with my T-Mobile-SIM-Card. So now i haven't another SIM-Card from an other provider, this i will test tomorrow.
But maybe someone can use my idea and will build an crack for this horrible "simlock.exe"
Who knows....
Click to expand...
Click to collapse
i wish i had enough time on my hands like u! id love to be able to do stuff like that!
how do u get to view and change registry settings?
I#ve edited the registry qith "PHM RegEdit". It's freeware, search in Google...
Looks interesting (HappyGoat? what do you think?)
This looks very interesting, did anybody else try it?
HappyGoat? what do you think?
Status: Blueangel: Idea to SIMLOCK.EXE
This message is for everybody who is interesting what i've found out:
The "rilgsm.dll" is the "Radio Interface Layer". In the BlueAngel this "rilgsm.dll" calls the "simlock.exe" for the correct SIM-Card. The "simlock.exe" gives a lot of result-codes back to the "rilgsm.dll".
My solution in the moment (I hope that i'm on the right way):
On my phone I've modified the "rilgsm.dll" so that it doesn't call the simlock.exe anymore. In this moment when i put in a other sim-card as T-Mobile the phone asks me for the PIN-Code of the new sim BUT then the phone brings me an error "unknown sim-status".
So I hope now that i find out what is necesary for the BlueAngel that it will accept a sim-card from an other provider.
If aomebody has an idea pleas feel free to write me...
good job!
yeah,i think you are are on the right way,i will test your idea.
I dont know if this is any help but i found it on a rival forum (GSM-forums)
Unlock pocket pc PPC 4100 solution here ...
--------------------------------------------------------------------------------
u just need to replace a file on windows folder file name is ( rilgsm.dll )
1. sync your PPC with your computer
2. Download the attached file in this post, rilgsm.dll
3. In active Sync - hit the "EXPLORE" button
4. Double click on PPC and then on the "windows"
directory
5. Copy rilgsm.dll into that directoy , and replace
the existing one
6. Turn off the PPC and then do a soft reset - take
the stylus and breifly poke it in the "reset" hole on
the rear of the unit ( opposite side of the antena).
The unit should then reboot
7. Take out your battery- put in your sim card
8. DONE!!!!!
Here is a files u will need
seeing as the phones look similar and both have the same files - could this be a solution or a place to start looking ie comparing the 2 files
Audiovox rilgsm.dll
keytor69 said:
I dont know if this is any help but i found it on a rival forum (GSM-forums)
Unlock pocket pc PPC 4100 solution here ...
...
seeing as the phones look similar and both have the same files - could this be a solution or a place to start looking ie comparing the 2 files
Click to expand...
Click to collapse
I tried it, but it doesn't work on the BlueAngel. After you replace the dll, the wireless radio switch of the phone turns on/off the Bluetooth :lol:
As for the phone functions: it says a wireless radio needs to be attached to use them...
Could be a place to start, although from what I've learned here so far, you can't (read: shouldn't be able to) unlock the phone just by hacking the rilgsm.dll. Or am I mistaken?
Status: Blueangel: Idea to SIMLOCK.EXE
Hello!
What is the status for my idea to hack the simlock?
I can't hack correct the "rilgsm.dll" only with a hex-editor. And I haven't the tools to dump the communications between the "rilgsm.dll" and the "simlock.exe". As I say in my last post in the moment the solution is that the BlueAngels doesn't ask anymore for the unlock code, but it says "Unknown sim status" when I put in an other sim-card from an other provider.
So in the moment i'll try to get a unlocked version of the BlueAngel. I know somebody who has unlocked versions of the BlueAngel.
When I get such a device first I will make a rom backup.
Then I will compare the file "rilgsm.dll" from the unlocked device with the file from the locked device.
Maybe i must flash my locked device with the complete rom of an unlocked device, i don't know.
I can't say I'm on the right way, but I will not give up in this moment.
I think to get the unlocked device will last approximately two weeks. So wish me luck!
Greetings, Peter
Here is rilgsm.dll from my unlocked device
Any news on your procedure......?
here you have some imei numbers from devices i unlocked (imei-check.co.uk)
35481900014849901
6115794
35481900013359001
93709129
35303000075896101
8540099
35303000067058801
10107856
35481900164713501
72385674
35481900167464201
5337494
35303000141098401
50429213
35481900048168401
32553958
3530300008219901
65418022
if it would help...
wow.. :shock:
can i too
my imei is 353030002939023
thanks
htvi,
Could you provide the .uif file that was extracted by the imei-check tool for each imei/unlock code combination? with those it should be possible to figure out how the people at www.imei-check.co.uk are extracting the unlock code!
Thanks in advance,
JDH
P.S. If anyone else has such information i.e. IMEI, Unlock code and the imei-check .uif data file (as extracted from each Blue Angel) that would be of a great help!
JohnnyDH
unfortunatelly i was too stupid to save all of them...(
but i'm unlocking 2-3 phones each week
i have now 2 orange m500 to unlock (htc magician)
i'll post imei numbers, unlock codes and files tommorow
@htvi
Ok, so I have downloaded both Windows mobile 2005 versions for Himalaya(probiably modified by some guy whose name I forgot), and the other official which i guess can be installed on all devices that have a bit faster processor and enough RAM.
I didnt want to install it before knowing if my m2000 is still gonna be sim-unlocked. Can you tell me htvi, or anyone else?
Thanks in advance
I don't know if it helps but, you may check this one out on http://unlock.nokiafree.org/ :
Download binaries for windows of NokiaFREE unlock codes calculator version 3.10
released on 4th, October, 2004
Maby the calculation steps just work...
ok, so here is one of them:
IMEI 354819002404379
UNLOCK-CODE: 60597866
i'll post the second later
note: it was an orange m500 (htc magician)
@htvi
Sorry about the delayed response, I'm often away for periods of time and have only just had an opportunity to check!
Thanks for that first set; have you processed any further phones and can therefore provide the details? the more the better really! if it would be easier for you, PM me and I'll provide my e-mail.
Cheers, JDH
Unlocking data
Here's th info of a recently unlocked MDA III (BlueAngel):
IMEI: 353030002519296
Unlock code: 5809468
Hope this helps.
Guys, my phone is dead and I need a little help please.
I have a T-Mobile MDA Compact II and have mistakenly (why it worked I don't know) 'updated' it with a Prophet firmware release. This progressed as I expected but was I since discovered completely wrong. My phone now shows a black screen with Dopod logo on boot and then hangs.
I have since found this site (looks good btw!) and subsequently the ftp area. I've downloaded the correct firmware for my phone, reset into the three colour screen and kicked off the Romupdater for the proper version I believe to be for my phone. With the 2 releases from ftp (one in that directory appears to be only half a zip file) they appear to be uploading but there is no change with the black screen problem.
I'm now stuck and am hunting for options. I'm more than happy to help myself but can someone explain what I need to do and start me on my way to fixing this.
All because it hangs from time to time when I run up too many apps on it.
Thanks in advance
Andy
Tell us what ROM you are using and which software you are using to perform your ROM update.
Anyway, it is weird that the Prophet ROM doesn't work on your phone. Keep this low tone, but I've done a Prophet ROM flash on my Charmer before. Everthing works well except the camera, that's why I flashed it back to the original ROM. I won't advise others to do so, there seems to be a few 'fatal' cases. I'm not sure, probably because it is compatible with the earlier Prophet version.
UPDATE: Nevermind, you seems to have the information. Good if you can stick to the same threat to avoid confusion. To others, please refer to
http://forum.xda-developers.com/showthread.php?t=275337&highlight=
At work and I've left the phone at home but I believe it was something like 2.3.15 (i.e. upgrade from v1 to v2)
Correction, it's SPL 2.15, IPL 1.12.
I have seen a post on Hermes bootloader access over USB using Mtty and now have access to the cmd> Can someone help me perform a bootloader based ROM downgrade to known working or deleting the image that is there?
Have now found the awizard utility, which file type does awizard need to be fed via the ROM directory?
Yes I'm a newbie at this and shouldn't have messed with the ROM update but I'm an I.T. guys by trade so if you can feed me the info I need I should be able to follow instructions
Phone is still 'dead' though.
It needs
XXX-OS.nba
XXX-Radio.nba
XXX-ExtROM (directory wit Ext Rom stuff)
You ought to get these from the FTP. I've myself uploaded a Charmer original UK ROM T-mobile, it should be still there is no one messed with it.
Hmm, I've missed something then. I put the .nba files into the ROM directory and then run awizard and hit w. Where I would expect to see a list of files with numbers there isn't any.
What I miss?
the dir structure of the aWizard looks like the attached, where you have the ROMs under the "ROM" dir and Ext ROM. Where the aWizard directory has the aWizard.cmd file.
Can someone provide a split up (i.e. seperated nbf files) for the Charmer or the correct memory addresses to punch into nb2nbf to create my own?
The images seem to have been removed from the FTP site and I'm in position to de-brick my phone!
Alright,
I notice this phone gets very little attention by the community, however, I like the phone, form factor, etc..
I am looking to "cook" my own HardSPL for this phone. Other providers now support GPS, EVDO RevA, Win Mobile 6.1, and I'm still stuck in what I feel is the ice age..
Please note that any instructions with a prompt are to be done in dos..
So far, I have done the following to extract the SPL:
1) Download HTC update for phone and extract using appropriate zip program
2) c:\>NBHextract RUU_***.nbh
This should leave you with a slew of .nb files - one will be named XX_SPL.nb
Now, to disasm this SPL, you can either go straight to IDA PRO or take an intermediate step using dumprom - dumprom creates a pe.exe and handles the offsets for you, so it puts you a step ahead, imo.
1) c:\>mkdir SPLDISASM
2) c:\>dumprom -5 -d SPLDISASM XX_SPL.nb
Now, in the SPLDISASM folder, you should have an exe file that you can now open in IDA PRO.
Now, here's where it is starting to get foggy for me. I followed the same process to dump the stock SPL and the HardSPL from a Hermes phone and I am in the process of hand tracing and hand comparing it to see how SuperCID/Write protection/Protected FF writes is implemented in the HardSPL - hoping that I can port the differences to my phone.
So, I pose the following to the experts:
1) In order to test my HardSPL once it is complete, can I run it as a SSPL and load a new ruu as a test - or will that mean certain death to my device?
2) Now that I'm this far into the code, i've come to realize that reassembling the code will be a lot of pain. Do you guys disasm/asm, or do you just hand edit in a hex editor?
3) Any suggestions to look out for, any ideas, etc?
Let me finish with a few disclaimers
1) To the experts: I have no intention of reverse engineering the HardSPL codebase - if I do use any of the code I have found, I will be sure to give props to the people involved and ask for permission before distributing. I am not looking to profit or scam or steal ideas, i am simply looking at how to make my phone better.
2) To the beggers: I have nothing to release at this time, this is all vaporware, I don't know when it will be done, I don't even know if it's do-able. I'm just trying ATM.
3) To the beginners: any or all of the advice above can probably wreck your device. This is by no way a means to unlock your phone, it's just my thought stream as I take what I believe are the preliminary steps to make my Libra the phone it's meant to be.
desquirr decompiler
I am now using the desquirr decompiler plugin for IDA PRO - it's dumping the subroutines into rudimentry c code.
I am now far closer to understanding what it is my device does; as well as understanding some of the hardspl code.
I recommend this tool if you are also SPL "cooking"
More Progress!
No Replies yet? Man, this is starting to feel like a blog..
Okay, I have managed to dump my Libra SPL, and I have disassembled it, and I have also decompiled it - Well, partially.
All the subfunctions are now represented in C - it's not particularily the most efficient c code I've ever seen, but it's readable. You'll get a hang for it and start to notice the FOR loops, IF/ELSE, WHILE structures.. Multiple return values.. etc.. etc.
I have decided to attach the Stock Libra SPL - I am hoping that I can eventually turn this into a tutorial to build your own custom SPLS for devices that aren't supported by the general community (note, this is high risk stuff..)
Hopefully this will serve as a reference to the community as I progress.
I do hope I get a little feedback too. If I'm going down the wrong path in terms of my approach, or for sharing this project with the community, it would be good to know.
Once again, small disclaimer - this file will not do anything for your phone as of yet.. Just a development step.. (I hope...)
MegaHambone said:
1) In order to test my HardSPL once it is complete, can I run it as a SSPL and load a new ruu as a test - or will that mean certain death to my device?
Click to expand...
Click to collapse
The hard part is to make a patched SPL run as Soft SPL from within OS.
You can try pof's JumpSPL and/or Haret to start your SPL, however I'm not sure these will run on smartphone platform at all. If not, JumpSPL source code should be available, so you can try to figure it out.
Be sure you don't overwrite your stock SPL or radio when flashing a custom ROM with RUU, this is the best way to brick it!
Unless you really can't go without flashing a HardSPL, IMO it's safer to keep the stock SPL flashed for recovery purposes.
HardSpl to add new commands
I'm happy to hear that somebody is working on a hard SPL for HTC S720. Here's the deal, I really want to change esn in this phone but I realized that for now it's not possible.
It's a MSM7500.
**I've tryied QPST but the version 2.7 only support MSN6500.
**I've tried QXDM 3.9.19 and still can't write the new esn. It says read only.
_________________________
How to put it not in read only?
Could I use a anykind of ready/writer to change info directly on the chip?
-----------------------------
**CDMA Workshop 2.7 all kind os ESN write doesn't work.
-----So, two options left:
1- either I desolder the esn chip and change it for a new one (to be honest, I haven't discovered yet if the esn is inside the MSM or on a different chip. If it's the case (on a diff. chip) it's a bit a pain in the but to do but it's still an option.
2 - I want to try shadowmite's method for writing the ESN into a PPC6800. Again it need to be done in high level via MTTY.
Concerning MTTY I cannot run commands because I can't put the phone on the boot loader screen.
I will try to run RUU wich will put the phone in bootloader screen. And then try mtty.
If this fail, I guess my only hope will be a hard spl.
I guess I've said a ton of thing that gonna make me look like a newbie (wich I am in prgramming).
Any suggestion...? Or any help I could bring to create this hard spl?
I am using HTC S720 in India. Currently I am using windows 6. Is it possible to make it work for windows 6.1. Telus ROM for HTC S720 is already available.
HardSPL for HTC5800/S720/LIBRA
I am currently trying to create a HardSPL for this phone and am having a hard time. I really need a solution for this and if anyone can create a HardSPL the company I work for is willing to pay a reward.
Why not try get a goldcard for it.Try ask at http://psas.revskills.de/ or if you know anyone with a axebox i think they do goldcards
Hello,
I've got an touch diamond with hard spl and windows mobile 6,5... but today my touch screen doesn't react on touching anymore so I need to send it for warranty. I had an backup of my original spl but I lost it installing windows 7...Now I need an original spl for my vodafone phone... Maybe someone can help me with this(I'm from holland don't know if that matters for the version of the spl...)
already many thanks...
Erick
Try searching on the Vodafone website for a Rom for your device, if you are able to find it then flash it, it will install the rom and radio, but the SPL will remain HardSPL. As the final step when you have your stock rom flashed is the SPL flashing, the SPL can be extracted from the Vodafone rom package with "nbh extract"... when you will have it follow the steps in the HardSPL thread where you can find the way to flash the original SPL...
Allright, I installed a new firmware from the internal storage because my touch screen doesn't work... now the only thing i need is the original bootlader. I tried nbh extract but it doesn't work on my windows? (windows 7) here is the link to my original rom http://www.vodafone.nl/Vodafone/wg2...igned_Diamond_52.44.25.24_1.08.25.08_Ship.exe
maybe someone can help me how to install the bootloader...(again I have no touchscreen anymore
regards and thanks already
heres how i envisage doing it.
you need to run jumpspl on your phone. I guess you can still run an OS and execute apps using the navi pad and action key.
if you have done the jumspl correctly your screen will rurn blank connect your phone to your PC and then you can flsh the original spl back!
i attach the jumpspl with instructions as well as the SPL.nb file extracted from the ROM which you posted the link to.
i did not recreate it as an nbh file as i do not know what model ID, country ID,Version and language your phone, is may be some one else can tell you! or if you tell me can build a flashable nbh for you!
i ask can some one else to please verify this procedure first, before you attempt doing it!
Well great thanks for the help but maybe you can make a flash file for me...the next thing is the problem, windows is installed and when you want to start windows you will need to tap te screen to run the standard procedure to allign the screen and set the date...I can't do this without touch and so i can't load any apllications how do i find the info that you need?regards
Can anyone tell me where to find:
ID, country ID,Version of my HTC touch Diamond??(without touch screen)
regards
alrright the next things i've found hope that it helps for creating a nbh file for my spl instead of the hardspl...
Country - The Netherlands
Dutch Language
Rom1.93
DIAM100
FCDID:NM8DMS
ok ive done it with the info you gave but i also used some of the generic info like Moel ID= Diam**** .... etc
the nbh is built but you should get confirmation off some one else before you proceed! i take no responsibility ! hope this helps
can somebody check/confirm this? Already many thanks! regards Erick
allright i installed it but it doesn't work still have got olinex spl...at this moment active sync is working maybe someone can help me out now?
regards
it wont work until you run jump sl properly! jump spl overides the write restrictions on the spl!
if you run jump sply correctly the screen will go blank as soon as you execute it!
then connect you usb cable and flash! (whilstthe screen is blank)
already thanks for the great help, JUMPSPL is running! now i try to install the rom with customruu and then copy the nhb you made for me in the same directory..only it still stays on olinex
CustumRUU says it is installed correctly and that it's finished...I think Jump SPL isnt working like it should, the screen is not turning black but it says that i can install the spl...I think the problem is that i can't alling the screen and windows is not fully loaded yet..?
regards
mmm, the problem is jum spl alright! im sorry i dont have a solution for you may be some one else can help! try searching i quiet sure i have read similar problems elswhere!
yeah the problems are there enough but no sollutions to it...I need the following thing...In the startup folder of windows mobile there is the welcome screen, i wan't to delete it so maybe i can go throug loading windows and then i maybe can load the jump spl...just to skip the allignment of the screen...but when i want to delete the files it says that i've got no autohority, also not with total commander, maybe someone knows anything to delete the files with active sync..?
regards and many thanks already to idristo