Related
Welcome to the our first 0.9 Alpha release (version 0.9.0.8294)
This release is Windows Mobile only. We will have our first Symbian 0.9 release in early January.
Please read through this post since there are some gotchas that you should be aware of.
Starting with this release we are starting our Alpha program much earlier, and introducing for each release a smaller set of enhancements. The benefits are:
* You get earlier access to releases
* It is clearer what is new and allows you to focus your feedback accordingly.
* We get feedback earlier and can better integrate it into the product.
Our target for this release is last week of January.
This release is basically the latest Skyfire 0.8.5 with the following additions (more to come over time):
Text resizing:
This is a new approach to improve the readability of larger sections of text on a web page.. Our current (e.g. 0.8.*) approach is ‘Smartfit’, which reflows text into a narrower column. When it worked it was ok, unfortunately it broke a lot of web sites.
This new approach simply increases the text size enough that you should be able to read it more comfortably once zoomed into the text area (e.g. into the column width). You can switch this feature on/off by using the ‘Smartfit’ toggle. This allows you to see the difference as well.
This is our first iteration. We are looking forward to hear your opinion.
WVGA and W(Q)VGA support:
Finally. Now we support both WVGA (800x480) and WQVGA (400x240) devices on both portrait and landscape format.
We have tested in-house the Sony Ericsson Experia X1 (WVGA) and the Samsung Omnia (WQVGA).
Please see the list of known issues for these phones. It’s early days so please help us report issues.
EXPERIMENTAL: Flash/Silverlight handling:
Experimental is what it says: this is something that we played around with and we wanted to get your opinion.
When the cursor (using the d-pad) is placed over a plug-in element (Flash or Silverlight) the cursor will change to a hand a red dot. This provides two functionalities:
1. Each click will move the cursor half the distance for better preciseness.
2. You can enter “Direct Edit mode” (click and hold):
This will now send all keystrokes directly to the embedded app. This opens up the possibility to enter text into Flash or Silverlight.
Play with it and tell us what you think.
Known issues for this release:
- Samsung Omnia sometimes disconnects after ~15-20sec when carrier data service is used (WiFi seems to work)
- Sony Ericsson Experia X1: soft menus are incorrectly mapped in portrait mode. This can be corrected in the Windows under settings.
Warning: WHEN YOU SEE AN UPGRADE FLAG IN SKYFIRE PLEASE IGNORE IT. This will unfortunately upgrade you to the production version and overwrite the Alpha release. If this happens, then uninstall Skyfire and reinstall the Alpha version. Sorry for this, will be addressed soon.
Your existing username and password in 0.8.5 beta (e.g. production) continues to work for this Alpha. Thus your bookmarks and history will be preserved.
To install:
Download from this post, extract and transfer the CAB file to your device. Then install. It will be cleaner if you uninstall Skyfire first.
Windows Mobile touch screen use: 0.9_Alpha_RC.8294-PPC50.CAB
Windows Mobile non-touch screen use: 0.9_Alpha_RC.8294-SMP50.CAB
Link does not work!
Broken link, would be kind if you hosted the cab directly on XDA .
Cheers!
it works for me.but i am a member
Would you please post the .cab file here? You can attach it to the first post.
antrak said:
Broken link, would be kind if you hosted the cab directly on XDA .
Cheers!
Click to expand...
Click to collapse
im not that clever.tell me how and i will
Download is only available for Skyfire beta members, so if anybody with an account could upload it here, it would be of a great help
Post a reply, click on "attach files" below the text entry frame, and attach the cab
The button is called "Manage attachments"
done it ..thanks guys ive learnt something new..enjoy your skyfire
Thanks man, you're great!
Cheers
First feedback:
It doesn't seem to be able to use my data connection. However, it works when I connect using wifi.
It does use my data connection. However, the sites are blurred (probably because they simply streched it to WVGA).
I try this SkyFire on my HTC HD befor few hrs and what to say I Uninstall it permanently!
Very ugly and bad quality screen
It`s not so fast like the peoples think.. my based opera 9.5 is 1000 times better than this!
I don`t see any reason to use this kind of browser and when the guys from SkyFire know the Display on HTC HD why they don`t do something to look cool and clear?
The browser look like is made for 150x300 device and someone streched it thousend times!
with one word REALLY NOT WOTH IT
Skyfire is still in Alpha... Don't expect miracles yet.
The big plus is the ability to handle flash 9 content including flash videos.
Bug: No sound in flash video such as youtube.
It works, but has no real WVGA. Looks like it scales up.
ez2remember said:
Skyfire is still in Alpha... Don't expect miracles yet.
The big plus is the ability to handle flash 9 content including flash videos.
Bug: No sound in flash video such as youtube.
Click to expand...
Click to collapse
Well, Skyfire is a miracle. It loads flash videos three times as fast as my data connection is, so I can even watch youtube videos without buffering on EDGE, which would normally be impossible. It's twice to three times as fast as Opera.
There are still bugs and no real WVGA support, but it's already evident that the final product will indeed be kind of a miracle.
Btw, I've got sound on youtube.
I agree it is much faster than opera but this alpha version looks like crap compared to opera. They do need to make it real WVGA although I think I'll still use it in the mean time.
the best
Thanks man, you're great!
Cheers
better than opera and iE
Sweeet! I'm trying it right now!
Some feedback:
When I started it, the boot up of skyfire was looping between "check flight mode" and "Acquiring data connection"
I forgot that I was in flight-mode, so I switched to TF3D (minimizing skyfire) and switched off the flight-mode.
However the Data connection wouldn't turn on!
So I killed the process of skyfire, and then my data connection could turn on.
Then I started up skyfire again, this time with data connection on, but it got stuck at the "Preparing to load..." screen.
3rd try worked!
I don't think many people are aware that Resco has launched a Beta release of their new Contact manager. At the moment it's free for download and has a license included, so I recommend you try it out while you can!
http://www.resco.net/pocketpc/contactmanager/
The application itself works really nice on HD. It's in full screen, with pretty much the same functions as we've seen on Yota contacts + it has an SMS screen that shows threaded SMS in a much better way then standard WinMo.
It supports Favorites, Call history, Contacts, SMS viewer and a Dialpad.
Of course, it's not nearly implemented into TF3D, altough the app sets itself as default Contacts. Biggest plus is the speed - it's a very fast application. Downside for me is - it's a bit on the ugly side Yota looks much nicer.
Mod warning
Dear All
Resco doesnt need anyone posting mirrors to cabs elsewhere, atleast where XDA is concerned. Resco has registrations policies required for download the files and we have to follow those the way we follow our policies
Happy downloading from Resco and continue with your discussions here
Anyone found voilating this rule shall be banned and the mirrors removed
I've personally kicked out Yota since the release of this app because it was buging my phone sometimes and the worth thing is that is was draining a lot my battery....
But this resco contact, is really awesome !
really fluide, it is automatically mapped on the call buton, and really useful.
For a beta version it is really promising
yota also annoying my HD. creating lots of bugging. resco contact manager is a good option~ importantly, it's free!
cool! i like it tooooo!
no languages options but its ok!
thx a lot
options and skins will surely come in the next release as this is the first beta!!!
it is really fast this app ... i love it so far
Thanks for the info Rozenthal.
I just wished there had been a .cab file to download.
For the time being, I'm away from my PC so will have to wait before installing and using this little gem.
tell me about it i'm a mac user and have to start that crap thing windows xp ...
That is a very valid point you mention there berkut_g.
I wonder how difficult it would be (and the legal implications) to recompile as a .cab file?
it's fast! even faster than iContact! It replaces the dailer, but its dailer doesn't support Video Call. Too bad but I need Video Call. It also has some problems with rotation - from landscape and then back to portrait...
cool fast and nice design
Rozenthal said:
I don't think many people are aware that Resco has launched a Beta release of their new Contact manager. At the moment it's free for download and has a license included, so I recommend you try it out while you can!
http://www.resco.net/pocketpc/contactmanager/
The application itself works really nice on HD. It's in full screen, with pretty much the same functions as we've seen on Yota contacts + it has an SMS screen that shows threaded SMS in a much better way then standard WinMo.
It supports Favorites, Call history, Contacts, SMS viewer and a Dialpad.
Of course, it's not nearly implemented into TF3D, altough the app sets itself as default Contacts. Biggest plus is the speed - it's a very fast application. Downside for me is - it's a bit on the ugly side Yota looks much nicer.
Click to expand...
Click to collapse
great find well done
I like it!
It's very fast indeed.
But it is totally not the program showed on the site.
How to change to that black version??
this is the fisrt beta and they haven't incuded any skins for the moment
hanackin said:
this is the fisrt beta and they haven't incuded any skins for the moment
Click to expand...
Click to collapse
Ah well, installed!
Feels great and very very fast!
Best contact manager so far.
I also like Yota, but that's much heavier and slower.
EDIT:
Just received a call: screen totally messud up!
Somehow Resco also tries to change this???
EDIT 2:
Via program files, Resco Contact: click on RPMOpt - "don't manage incoming calls". Works better now
I installed it on my Sprint Touch. It's a really nice program. I wish the touch sensitivity was a little better (when selecting "Call Home", "Call Mobile", "Send SMS", etc on each contact). I have to really hit the button just right towards the bottom for it to work. It is still beta so I'm sure they'll improve on it. I used the love Vito Funcontact but this app will be my new replacement. Try it out!
Edit: The "Manage Incoming Calls" is working nicely on my phone... so far.
Beards said:
Thanks for the info Rozenthal.
I just wished there had been a .cab file to download.
For the time being, I'm away from my PC so will have to wait before installing and using this little gem.
Click to expand...
Click to collapse
here is ...
MOD EDIT: Cab removed. No mirrors needed by Resco
Resco Contact Manager
I tried it two days ago, but uninstalled it due to buggy network shortcuts on the today plugin, and limited contact functions.
Replaced it with phoneAlarm and iContact Burt edition
Thanks Rozenthal, good find.
Really nice contact program.
I am porting some Titanium plugins for WM6.5 Standard.
Currently, I have ported the CLauncher & CComm, both of which were originally developed by "chriscsh" and quite good.
You can find out more information about these plugins on their corresponding threads:
* Titanium CLauncher http://forum.xda-developers.com/showthread.php?t=514490
* Titanium CComm http://forum.xda-developers.com/showthread.php?t=513747
The plugins require Mortscript, which is also included below.
I have only tested and verified the plugins using the PD Titanium panels on the EnergyROM. However, I believe they should work on the 3vo ROM as well. These plugins use the ATPluginInstaller, which provides a robust installation and limits compatibility issue with other panels.
Here are some screenshots:
(CLauncher showing two applications, Facebook & Tiny Twitter)
(CComm showing the two pages, Setup & Phone connection)
(Steps for adding an application to the CLauncher panel, in this case, Opera Mini)
is there anywhere we can add another panel? one for apps another for games if possible?
Well.... not exactly. The CLauncher is a single panel.
The idea here is to be able to access and launch applications that are used very frequently (maximum of 9). It really does not matter if they are games, utilities, online applications, native applications.
The feature that you ask for would need to be implemented in a different plugin.
thats what im saying like an a cab that will let us another panel like clauncher
This two are working great, the only one i miss is the contact panel,
i dont have much experience with this type of mods, and im getting an atplugin error, so if anyone could help i would really appreciate.
can someone help me set this up no idea how
yeah working fine in portrait mode too!!! (some fix to the cpr but nothing impmossible!!)
really good job!
now we need a way to add more than one launcher... it could be great and usefull!!
ty
KROMO50 said:
can someone help me set this up no idea how
Click to expand...
Click to collapse
O.k once you install the .cabs I had to go to Chome Config. and "show" both panels. You can the go back to you home screen and setup the CComm panel. As for as the CLauncher panel goes manual input works best; expecialy if your apps are located on your storage card, i.e \Storage Card\Program Files\Facebook\facebook.exe. Then you name it, and choose a icon. Ihave Chome Config. Icon-pak installed and I get mine form there. Hope this helps. I would love to have Chome Config work fully on WM6.5 though.
Ok, I am scratching my head just a little here. I have this set up and it is working well. I am able to launch a couple of programs. Of course I set those app's up using the "Choose from list" method. Now....here is the problem. I am trying to add the Opera Mini app using the manual method referred to in your 3th picture, but my Branded T-Mobile Dash does not seem to have a forward slash "\", only a backward slash "/". Am I blind, or just being a n00b? I have looked the keyboard over and over again, and honestly, I don't think it has it. Help please.
skyline247 said:
Ok, I am scratching my head just a little here. I have this set up and it is working well. I am able to launch a couple of programs. Of course I set those app's up using the "Choose from list" method. Now....here is the problem. I am trying to add the Opera Mini app using the manual method referred to in your 3th picture, but my Branded T-Mobile Dash does not seem to have a forward slash "\", only a backward slash "/". Am I blind, or just being a n00b? I have looked the keyboard over and over again, and honestly, I don't think it has it. Help please.
Click to expand...
Click to collapse
when your typing, press on your symbol button, and you'll find it on the symbol list.
BTW, works good on 3VO rom
roloracer said:
when your typing, press on your symbol button, and you'll find it on the symbol list.
BTW, works good on 3VO rom
Click to expand...
Click to collapse
Ah. I see said the blind man. Heck, I didn't even know that was what that button is for. Guess it would have helped if I read my owners manual, lol. I was so used to texting on my previous phone, Motorola RAZR. Like I said before, I am new to the smartphone/full keyboard thing.
Thanx man. I would have taken forever figuring that out.
skyline247 said:
Ok, I am scratching my head just a little here. I have this set up and it is working well. I am able to launch a couple of programs. Of course I set those app's up using the "Choose from list" method. Now....here is the problem. I am trying to add the Opera Mini app using the manual method referred to in your 3th picture, but my Branded T-Mobile Dash does not seem to have a forward slash "\", only a backward slash "/". Am I blind, or just being a n00b? I have looked the keyboard over and over again, and honestly, I don't think it has it. Help please.
Click to expand...
Click to collapse
To get the "\" you must press the camera/sym key that is to the right of the space bar. There you can find backslash.
Is there a task plugin for windows mobile 6.1
Is there a task plugin for windows mobile 6.1. Which can display tasks on homescreen.
awilaman said:
I am porting some Titanium plugins for WM6.5 Standard.
Currently, I have ported the CLauncher & CComm, both of which were originally developed by "chriscsh" and quite good.
Click to expand...
Click to collapse
Can you look into porting the AT Favorites? Here's the link:
http://forum.xda-developers.com/showthread.php?t=506221
awilaman said:
Here are some screenshots:
(CLauncher showing two applications, Facebook & Tiny Twitter)
(CComm showing the two pages, Setup & Phone connection)
(Steps for adding an application to the CLauncher panel, in this case, Opera Mini)
Click to expand...
Click to collapse
Now i feel like i wasted 30 minutes of my time or that i'm not as lazy as some people who use roms.... when i installed the 3vo rom series i spent the first 30 mintues after initial setup editing one of my chome panels so i could have a programs panel with facebook, twitter, oz messenger, youtube, and opera mini. the made a second panel for my comm settings, reboot, and free memory. lol. i guess when the final version is released i'll just use your ports instead of wasting my time. lol
jdshifflett said:
Now i feel like i wasted 30 minutes of my time or that i'm not as lazy as some people who use roms.... when i installed the 3vo rom series i spent the first 30 mintues after initial setup editing one of my chome panels so i could have a programs panel with facebook, twitter, oz messenger, youtube, and opera mini. the made a second panel for my comm settings, reboot, and free memory. lol. i guess when the final version is released i'll just use your ports instead of wasting my time. lol
Click to expand...
Click to collapse
What I did is export the registry entries for my custom panels, so when I reflash just import those entries and I'm ready to go, just export the following entries
HKLM\Security\CHome\DefaultSettings\""Your panel name"
HKLM\Software\Microsoft\CHome\""Your panel name"
The export is on My documents so after you export copy it to your SD card
Hope this help and save some time next time
Regards,
Enrique M. Perez
Empel1960 said:
What I did is export the registry entries for my custom panels, so when I reflash just import those entries and I'm ready to go, just export the following entries
HKLM\Security\CHome\DefaultSettings\""Your panel name"
HKLM\Software\Microsoft\CHome\""Your panel name"
The export is on My documents so after you export copy it to your SD card
Hope this help and save some time next time
Regards,
Enrique M. Perez
Click to expand...
Click to collapse
ahh. very keen mind sire. i'll defiantly keep that on the top of my to-do list since ookba just announce that we can finally start counting down to his newest release. it should save me a little time before i start testing
Can somebody please upload the titanium *.cpr files from the Energy ROM?!
Thanks
any updates needed for the newest 3vo update or are we good to go?
EDIT:: newest 3vo has it built in already. haha
Hello,
Is anyone else using Microsoft Reader? I can't get it installed properly. The installation and activation run through OK but the progrm does not appear in the "All programs" list. If I go to the Microsoft Reader directoy and click on MsReader.exe it runs fine, activated and everything....? Is there a way to create a "shorcut" for a file to point at from the "Programs" tab?
Grateful for any help.
Cheers/McHan
How strange
To manually make a shortcut: browse in file explorer to the msreader.exe file, long press, choose "copy", browse to my device\windows\start menu\ programs, long press or right soft button, choose "paste shortcut". If desired change name (long press on item)
Brilliant, worked like a charm. Could not get it to work in File Manager, but in Total Commander... Many thanks!/McHan
Hello, I've installed the latest version of the Microsoft Reader and the instalation was successful. But I have a different question. How do you page in it? There are no key arrrows, touch interface doesn't work and the areas on the display which function for paging (beside the page number) are too small to touch them comfortably. So far I've found following ways to use it, but I'm satisfied with neither:
- use stylus to touch the paging areas
- open the keyboard and use the arrow keys
- install the AEButtons application to remap the volume keys (in this case the the whole system became unstable and furthermore I was not able to read holding the device in the right hand
Thanks for any help
Hi,
I am a fan of ebooks and have used many ebook reader program on many pda devices. Just as you did, I also installed MS Reader and have some observations:
1. Ufortunately Ms Reader is basically designed for d-pad pda's. That is to say, it is impossible at this stage, for this version to change the page via touch or slide movement on the screen.
2. Other than that, MS reader installs a font called "wingdings" for itself, which conflicts with Advanced Config and HD Tweak. That's the reason you see awkward characters in these programs. With my TYTN II, I could delete or rename the name of this font and continue using both programs. However, it impossible to delete or rename this font even via Total Commander in Touch Pro 2. Because this file is accepted as a Rom file by the operationg system. Therefore I had to uninstall MS Reader.
3. I use MobiPocket for many ebooks; it has many good options; though I should say it needs upgrade too. Please look at this thread: http://www.mobipocket.com/forum/viewtopic.php?t=16032
4. I use a different program for lit files; but I can't remember it's name now since I broke the LCD of my screen and trying to repair it nowadays You can see it here: http://forum.xda-developers.com/showthread.php?t=534883
5. Microsoft should develop a new MS Reader version or we should find a way to use cleartype in Adobe Acrobat somehow.
Regards,
jahr said:
Hello, I've installed the latest version of the Microsoft Reader and the instalation was successful. But I have a different question. How do you page in it? There are no key arrrows, touch interface doesn't work and the areas on the display which function for paging (beside the page number) are too small to touch them comfortably. So far I've found following ways to use it, but I'm satisfied with neither:
- use stylus to touch the paging areas
- open the keyboard and use the arrow keys
- install the AEButtons application to remap the volume keys (in this case the the whole system became unstable and furthermore I was not able to read holding the device in the right hand
Thanks for any help
Click to expand...
Click to collapse
Yes, pretty much the ebook readers need a massive update.
One thread I found on the Microsoft Reader support site had one "semi-official" person saying they were working on a version for WinMob 6.1, but that was last year, and no further updates.
I found another thread that said that Microsoft had stopped support for Microsoft Reader.
So no idea what happens. I'm hoping hen WinMob 6.5 launches, there will be a proper touch-friendly ebook reader in the store, that can handle .lit files as well =)
eReader
eReader (fictionwise/barnesandnoble) is pretty sweet for commercial titles. And for non-commercial titles, manybooks.net brings gutenburg to the eReader format (as well as many others) without you having to do any conversion yourself.
I haven't used the winmo version yet (which allows you to purchase/dl books directly btw), but the old Palm version uses the dpad And the touchscreen for page turning, so I imagine it would use the touchscreen for the better supported winmo version as well.
If I had a library of .lit books myself, I'd consider converting it to something more universal.
Microsoft Reader now for WM 6.1
A couple of weeks ago Microsoft quietly introduced a new version of Microsoft Reader that finally works fully on WM 6.1. Long overdue.
Does this mean that they still see Reader as a viable product, and that it could be developed further in a growing and ever-evolving ebook marketplace?
http://www.microsoft.com/reader/downloads/ppc.aspx
lmoritz said:
A couple of weeks ago Microsoft quietly introduced a new version of Microsoft Reader that finally works fully on WM 6.1. Long overdue.
Does this mean that they still see Reader as a viable product, and that it could be developed further in a growing and ever-evolving ebook marketplace?
http://www.microsoft.com/reader/downloads/ppc.aspx
Click to expand...
Click to collapse
Thanks for the news; however MS Reader still sucks; I have set up and used the program for trial with many of my .lit files; but I came across some annoying features:
1. The program installs a font called wingdings.ttf for its viewing purposes; the problem is this font interferes with many programs including Advanced Config and Manila 2.5! In the previous version it was possible to rename and disable this file in Total Commander; however it seems as a ROM file now and it's possible to get rid of this nonsense font.
2. It's still very hard to turn page in devices like Rhodium, where you do not have the D-pad.
3. The funny thing is, there was an common bug preventing the opening of .lit files inside File Explorer; we could get rid of it with a small registry trick. You can see this bug here: http://forum.soft32.com/pda/open-reader-files-WM5-file-explorer-ftopict66047.html
The funny thing is that silly bug is still there LOL after all these years. I think Steve Ballmer needed to fire some more crew
Therefore I have uninstalled the program again.
Regards,
Alright, let’s get Started! This is the new WM6.5 23081. I added a new Startup Animation (by aestivalisakito) and Sound (by me), Modified the Start Menu, Added my Favorite Keyboard (On all but Super Ultra Lite), and ArcSoft MMS 5.2.2.37 (on all but SUL).
I will start with a Super Ultra Lite Version, and then see where that leads me. My plans, if I have time, would be a Super Ultra Lite, a Normal Chome/Titanium, an M2D, an M2Dv2, a MotoSurf, an SPBMS 3.5, and who knows what else. Each Different Version will be listed on Page 2 (Might Spill onto Page 3) with the Download Link for each. In each Download Link I will post the Self Extracting Kitchen, an RUU_Signed.nbh, and an AutoFlash file.
What is AutoFlash you ask? I've taken the RUU file, added the Flashing Program, and Packaged it all up into an AutoExecuting AutoFlashing Program, and, it's a smaller download than the RUU alone. Pretty cool huh? Yes, others have already done this, but I'm going to make it a standard practice from now on.
"AutoFlash (tm), Making Flashing Socially Acceptable, One Package at a Time!"
My recommendation for Flashing is:
Make sure you have Hard SPL on your Phone. I recommend Olipro 1.20 - Click Here for More Info
Be sure your battery is at least 50% full.
Start your phone in Tri Color Screen mode. Steps below
--Unplug your phone from USB
--Hold down the Power & Camera Buttons
--While still holding them down, press the Reset Button using the Stylus
--Release the Reset Button, but continue to hold the Power/Camera buttons until you see the Tri Color Screen
--Plug in the USB cable (if asked about installing a driver, do this), You should see USB in the White Box)
Now you can Flash.
Run the AutoFlash file for the ROM you've selected, or Flash using the Standard Flashing Program included in the Kitchen.
Enjoy!
Suggestions:
For those who wish NOT to have a Startup Sound (it can be annoying) use my attached Kill Startup Sound.cab I'm sure this is going to be downloaded a LOT. If requested enough, I'll remove the sound completely.
If you set the IE8 Browser to 'Mobile' instead of 'Auto', it's actually usable. 'Auto' will try to display Full Websites. If you have the time, it looks Beautiful, and it displays basic Flash, but it does take a LONG, LONG, LONG time. (Menu, Tools, Options, Other)
Thank you to EVERYONE on XDA. Chefs, Programmers, Cookers, Users, Noobs, everyone! You've ALL helped me to be able to do these. I'm sure I'll learn a LOT more as the days go by.
I wanted to give a Big thanks to the.decoy and Tomme45i.
This is part of Tomme45i's Kitchen, and I'm using the.decoy's SYS/XIP. He's done an awesome job of making them lite and fast!
Keep an eye out for the'decoy's ROMs coming in the future. He's remaking the Kitchen from Scratch so that it can cook Trinity and P3600i all in one Kitchen. He's also completely reworking the folder structure and a LOT of other hidden surprises. I know you will all be impressed, the guy is super smart and talented. Like many others on here, he's got a personal life, so it may not be completed immediately, so please be patient.
Of course, there's also Chanvi/Oggi, Ervious, and Many others, I can't remember them all.
23081 SUL
23081 Super Ultra Lite
26.35MB Free Ram
82.80MB Free Storage
Wow, this one is Lite! No Really, I mean it! You may need to tape a roll of quarters to it to keep it from floating away..
I know this will not be for everyone, but there are those out there who prefer to start lite and add what they want from cabs. Well, this is the one. This thing runs FAST, but has NO extras. If you don't want it in there, it's NOT.
Phone Works - No Speed Dial or Video Call
Camera Works
WiFi Works - No CommManager
Text Works - No MMS
Email Works
IE8 Works
New Zoom Tool on Taskbar Works
New Contacts App Works
New Calandar Works
Calculator Works
Standard Task Manager Works
ActiveSync Works (Verified on Win7 WMDC)
My Modified Start Menu w New Folder Icons (Thank You 'theDecoy')
Update 10/27/2009 Available 1:25pm - Fixed IE8 Issue, Please download again if you need IE8.
Download Now! Self Extracting Kitchen, AutoFlash ROM, RUU_Signed.nbh
23081 Normal Now Available
21.74MB Free Ram
57.75MB Free Storage
This is a Normal ROM with standard items installed.
Phone Works - Speed Dial Works, NO Video Call, Sorry, not sure why yet.
Camera
WiFi
Text
MMS - ArcSoft MMS 5.2.2.37
Email
IE8
New Zoom Tool on Taskbar
Voice Command
New Contacts App
New Calandar
Calculator
HTC Task Manager - While on Home Screen, Tap Taskbar, When Icons Show, Tap and HOLD Top Right Corner Until Icons Dissapear, Release.
CHome Editor v1.6Beta by Showaco
Pim Backup v2.8
Remote Desktop Mobile
Modem Link
CommManager
Internet Sharing
Bing
Marketplace
MSN Weather
Microsoft My Phone
MSN Money
Getting Started
ActiveSync
My Modified Start Menu w New Folder Icons (Thank You 'theDecoy')
Includes all the items in the above images, plus the following:
Download Now! Self Extracting Kitchen, AutoFlash ROM, RUU_Signed.nbh
23081 FlashBack
23081 FlashBack NOW AVAILABLE!
23.33MB Free Ram
20.47MB Free Storage OUCH! Not sure where all the storage went???
I really wanted to get a couple more menu items and icons fixed, but for some reason, I cannot figure out what's wrong. Also, I tried to get the FingerKeyboard configuration to happen after first boot, but could not make that happen either. Many of the Packages I created from Cabs myself or Modified the Original, so if there's a problem, let me know.
Featuring: The Old HTC Home Screen, Thus the Name
3 Keyboards to Choose From: FingerKeyboard 2.1 - MS Keyboard - Transcriber
3 Browsers to Choose From!!! Opera - SkyFire - IE8 SkyFire is my Fav, although, this Opera is the Best I've Tried
HTC Task Manager - While on Home Screen, Tap Taskbar, When Icons Show, Tap and HOLD Top Right Corner Until Icons Disappear, Release.
New LockScreen with Multiple Sliders
New Zoom Tool on Taskbar
Camera
WiFi - 2 Digit IP, Sorry - If Changed, I loose Auto WiFi Settings Page
MMS - ArcSoft MMS 5.2.2.37
AutoLock (SmartLock) - Find this in the System Settings Tab
My Modified Start Menu w New Folder Icons (Thank You 'theDecoy')
Main Menu
Phone Works - Speed Dial Works, NO Video Call, Sorry, not sure why yet.
Text
New Contacts App
New Calendar
Email
MS Alarms
MS Task Manager
MS File Explorer
Office Mobile 6.1 and One Note Mobile
Tools Menu
Soft Reset with my Custom Icon
Phone Search
Calculator
Finger Keyboard Config
HTC Home Customizer
nueSIPDefault - Default Keyboard Selector
Pim Backup v2.8
PHM Regedit
Communications Menu
ActiveSync
CommManager 2.9.5.0
Games Menu
Solitaire
Bubble Breaker
Kevtris 2 – Tetris type game
tripYzee! – Yahtzee type game
GPS Menu
Bing Search - Very Cool Tool
Google Maps
TomTom Navigator - You need your own Purchased Maps, or download the Free City Map
Internet Menu
IE8
Opera 9.7
SkyFire – Cool!
Multimedia Menu
MS Pictures & Video
Windows Media
YouTube
Download Now! Self Extracting Kitchen, AutoFlash ROM, RUU_Signed.nbh
Please read the Flashing Instructions in the First Post for more info on these.
After Flashing, give it some time. It takes a LONG TIME to finish loading the first run. Immediately after flashing, I recommend running the FingerKeyboard Setup found in the 'Tools' Folder. Then use the 'nueSIPDefault' also found in the 'Tools' folder to set your desired Keyboard.
SuperSport
THANKS YOU FOR THE ROM
BUT I COULD NOT FIND THE LINK.
OK NOW I GOT IT
arnooo said:
THANKS YOU FOR THE ROM
BUT I COULD NOT FIND THE LINK.
Click to expand...
Click to collapse
It JUST finished uploading. Wow, you were fast getting here.
well done rom
thanks
oouuuhhh!!.. it a good rom!! vary fast.. but .. i need video call, any workaround?
thankz dude
Waiting for normal ROM 23081.
any screenshot?
IE8 not working
On my device I can select from the start menu the IE8 icon. On the next screen just a bigger IE8 icon is shown. But no reaction (i.e. IE is not started).
Keyboard
Hello
SuperSport, nice ROM tested since 1 hour and something is missing for me ... a real finger keyboard, can you share the one you cooked in 23064 Rom. I didn't find it on your mediafire web site.
Thanks a lot
UCLA
HACH said:
On my device I can select from the start menu the IE8 icon. On the next screen just a bigger IE8 icon is shown. But no reaction (i.e. IE is not started).
Click to expand...
Click to collapse
I just noticed this. Will see what happened. I had it working, but somehow lost it.
Edit: Indeed, I accidentally removed a language folder for IE. It's back in, but will take me a bit to re-upload the files. I will notify in this post when they are back up, check back. All updated and IE8 Working!
ucla said:
Hello
SuperSport, nice ROM tested since 1 hour and something is missing for me ... a real finger keyboard, can you share the one you cooked in 23064 Rom. I didn't find it on your mediafire web site.
Thanks a lot
UCLA
Click to expand...
Click to collapse
The Keyboard you speak of is Cooked in. I will be adding it to the Normal Version coming shortly.
Here is a CAB version. Not sure if it works on this ROM, but it's worth a try.
http://forum.xda-developers.com/showthread.php?t=531315
SuperSport said:
The Keyboard you speak of is Cooked in. I will be adding it to the Normal Version coming shortly.
Click to expand...
Click to collapse
OK, I hope it would be as fast as this one ... Waohoo it's amazing !!
Really Great Job
THX
purewater said:
any screenshot?
Click to expand...
Click to collapse
Just Posted
but 23081 normal download???
rubenalf said:
but 23081 normal download???
Click to expand...
Click to collapse
Uploading now. Just a couple more minutes...
Hi! I wanna now why do you use 1.46.30.11 radio version?Gps is working? Batery have big life ?
By the way your roms are very intersting I will test your normal version in few days.
Tanks!
Alex.
goalex said:
Hi! I wanna now why do you use 1.46.30.11 radio version?Gps is working? Batery have big life ?
Click to expand...
Click to collapse
I was using 1.56.70.11 for a Long time, but then decided to try others to see which one gives me best performance and battery life. Because I use my phone so differently from week to week, it's hard for me to judge, and I just stopped with 1.46.30.11 and have not changed it again.
I 'THINK' 1.56.70.11 gives a slight GPS perfermance boost, but at the cost of battery life. That's only an educated guess from using it for a year or so. I'd be curious what others think now that 1.56.70.11 has been here for a while...