Related
Hi
I'm looking at purchasing an XDA IIi from O2, both to use as a PDA, phone and for SatNav. It's likely that I'll go with TomTom and I already have a Bluetooth GPS receiver.
I've already got an O2 blue headset that works with my SonyEricsson T610 and I'll also be wanting to use that whilst in the car.
I have some questions that I hope some of you might be able to answer...
Is it possible to use both a bluetooth headset and bluetooth GPS at the same time?
Does the XDA IIi support the O2 blue as the SE T610 does, i.e. I press the button and say the contact I want to call and then the phone (home, mobile etc).?
Thanks for any help!
GWG
Hi
I have the Jabra BT 200 headset and the Leadtek 9537 GPS unit. They both work fine at the same time on my Xda IIi.
I was checking the GPS using Pocket Streets (have not re-installed Tom Tom yet but I do not envisage a problem)
The BT setup seems better on the IIi, there wasn't any messing around with the COM port settings like there was with the Xda II.
If you mean the fonix VoiceDial software that comes with it, then yes, it does work that way.
On the whole, I am pleased with the IIi (I had the II for a year), the camera is flakey but I can live with that.
MarkySan...
Thanks for that... Looks like it'll do what I'm after
I might then have to become a regular on these forums!
Cheers
GWG
Be warned, if you mean the o2 CLIP blue headset (made by iTech), I also have it and have been unable to get it working. (Why oh why can I not have the old stack from the xda2 as that worked perfectly with headset profile)
At one point I was briefly able to get it installed as a handsfree device but it then stopped working. Before I got rid of my xda2 I tried re-pairing the devices and it worked great first time. Other BT headsets I had access to worked fine.
Does anyone else have this headset and an xda2i? I've posted about this before but got absolutely no feedback whatsoever. Could anyone tell me if they're using a clip style headset (not the ones that hook round your ear) with the 2i...how much it cost and what make etc. I may have to bite the bullet, sell the o2 headset and buy another one.
Cheers
Anthony
2 BT devices simultaneously on XDA II
This is an interesting problem. I've got an XDA II, a leadtek BT gps receiver and a nokia handsfree BT carkit, plus Tom Tom.
I haven't got them all working at once yet and have been told there is a problem getting the handsfree to work anyway.
This was from a so called reputable high st mobile phone chain (who also said that only one BT device could be connected at once).
Any help or advice appreciated....
David
Well, I got my XDA IIi and very nice it is too.. this is my first foray into the world of PDA so I've nothing to compare too, so I'm very pleased
I've twinned it with my O2 blue headset and it works fine.
Also got TomTom navigator and a bluetooth GPS (although you still need a cable for power across the dashboard! Doh!).
They both work together, although there does seem to be some strangeness when they're both on:
1. The GPS sometimes drifts off... although this is based on a 15 minute drive into Town only
2. When on a call, the GPS signal seems to go completely and TomTom doesn't know where I am!
I do have a question about WiFi and MMS if anyone could help...
I have a WLAN at home, whihc the XDA IIi seems to connect to fine. However, when I am connected to it, I cannot send or receive MMS messages.. I'm sure it's something to do with this 'Internet' or 'Work' stuff, but this is all rather confusing. Has anyone written an idiots guide to all these strange settings?
Thanks!
ive used it all week on calls and even had the voice through my jabra 250 gps stayed on all the time it was fine the only problem i had was i couldnt get gprs without a softreset
Alix, are you saying you got the Tom Tom voice directions through the Jabra?
If so, I'm off to get the i!
Firstly is this forum ONLY for developers?
Because you will quickly discover that I am not a developer but a confused user and I was hoping that I could get some advice here?
Anyway I have a Bluetooth headset and was considering getting TomTomGo but also wondered if the headset and a BT GPSr would work together.
Also does anyone know if we will ever get voice dialling working on MobilePPC? I had a brief discussion with someone at Fonix who said that "Microsoft does not expose the necessary functions to third party software developers like Fonix".
Actually, now I've been using it for a while, it seems the reason Tom Tom drifted was because of a loss of signal.
Using the BT headset and Tom Tom with the BT GPS together is fine.
What is annoying though is the fact that the Phone App pops up in front of Tom Tom and doesn't go away when the call is complete.
Also, when touching the button on the headset to open the connection with the phone, it doesn't automatically start the Voice dial, you still have to reach across and fumble about looking for the button on the side. Has anyone got any ideas if it's possible?
That being said, the voice dial works OK.. not brilliant, and the voice that tells me what it thinks I've said is rather disappointing.. I want to keep telling it to 'Please speak more clearly' !
And I too can hear the Tom Tom voice prompts through the BT headset when the conection is open, although I prefer not to.
See my note re what the Fonix guy said above.
aRGybaRGy said:
Well, I got my XDA IIi and very nice it is too.. this is my first foray into the world of PDA so I've nothing to compare too, so I'm very pleased
I've twinned it with my O2 blue headset and it works fine.
Also got TomTom navigator and a bluetooth GPS (although you still need a cable for power across the dashboard! Doh!).
They both work together, although there does seem to be some strangeness when they're both on:
1. The GPS sometimes drifts off... although this is based on a 15 minute drive into Town only
2. When on a call, the GPS signal seems to go completely and TomTom doesn't know where I am!
I do have a question about WiFi and MMS if anyone could help...
I have a WLAN at home, whihc the XDA IIi seems to connect to fine. However, when I am connected to it, I cannot send or receive MMS messages.. I'm sure it's something to do with this 'Internet' or 'Work' stuff, but this is all rather confusing. Has anyone written an idiots guide to all these strange settings?
Thanks!
Click to expand...
Click to collapse
You can ONLY connect to MMS via the O2 GPRS network. Since your WIFI is outside their network, and is somebody elses, they won't let you login to their servers to send. All the carriers work this way - it's how they charge!
Hi,
I have a XDAIIi, Nokia car kit and TomTom 3 bluetooth. I have been trying to connect my phone to the car kit using bluetooth. Unfortunately it will only connect for phone calls. Does anyone knows how to permanently connect the phone using a different profile, so that I can listen to music and voice instruction of my TomTom using the car audio system? Any help is appreciated. Thanks
Reda
Hi,
I have a XDAIIi, Nokia car kit and TomTom 3 bluetooth. I have been trying to connect my phone to the car kit using bluetooth. Unfortunately it will only connect for phone calls. Does anyone knows how to permanently connect the phone using a different profile, so that I can listen to music and voice instruction of my TomTom using the car audio system? Any help is appreciated. Thanks
Reda
All I can help you with is that using my Jabra I press the call end button on the headset and the sound for my Tom Tom and MP3s comes through the headset.
Hope this helps.
Thanks mindracing. Do you know what services/profile your jabra return when you enquire it?
KR,
Reda
It shows up as Hands Free connection to Jabra 250.
Status just shows Jabra 250/Audio Gateway.
If you know where else to look just ask.
Thanks mindracing. yesterday I tried every possible combination but it seems I cannot stream my music and Tomtom instruction to the car kit.
Thanks anyway.
KR
Reda
just a note on this. I have had a jabra bt205 working with a QStarz BT-800 gps, it works ok BUT when i changed from the jabra to a stereo headset it workd ok too but only on the crap audio quality. I installed the cab file for A2DP support. now i have really good audio but as soon as i try to connect the gps the audio goes all choppy and eventualy cuts out.
It is of my limited opinion that you cant run A2DP and a bluetooth GPS because of the bandwidth (data transfer) available. Ive yet to see if i can get tomtom running with the wired gps and A2DP quality headset.
Think ill be goin back to wired headset for on the bike so i can have music, tomtom and calls... just need to find someone on here who has got a voice dial prog to run from the green call button on the wired headset.
GPS and BT Headset on XDA II
Anton.Valleyman said:
Does anyone else have this headset and an xda2i? I've posted about this before but got absolutely no feedback whatsoever. Could anyone tell me if they're using a clip style headset (not the ones that hook round your ear) with the 2i...how much it cost and what make etc. I may have to bite the bullet, sell the o2 headset and buy another one.
Cheers
Anthony
Click to expand...
Click to collapse
I use the MS BT stack with my Blue Ant BT earpiece and the Broadcom BT stack with a BTGPS74R receiver (aka Holox BT-321). They both work well individually, but not together. Another post made the point about com port issues ... well yes, I use the Broadcom BT Manager for this purpose, but the XDA II does not pair with the Blue Ant, even with TomTom 6 OFF. It shows up but is not really paired correctly.
Perhaps there is a simple answer ... if so, I am sure someone will advise me.
I've been struggling for several months now to get my MDAC III working with my built-in car Bluetooth hands-free. The full details are below, but in short, I'm told that the system seems to work OK with Wizard, and I'm wondering what about the Wizard could be different to the Artemis (Bluetooth stack perhaps?), and if there is a difference, is there anything I can do about it?
The full issue: The system I'm trying to connect with is in a Land Rover Freelander 2 (LR2 in the US) Initial pairing was a bit hit and miss, but now I've got the the phone paired with the PTI, that's not a problem and they automatically pair whenever I start the car.
I can succesfully initiate or answer a call from the car, but the call itself isn't routed through the car's speakers/mic, it just goes through the phone as normal. However, once in a call if I select the "privacy" option on the PTI (which would normally have the effect I've already got of passing the call to the phone), and then select the "hands free" option, it does what it should and routes the call through the car. Effectively, it's as if the system starts in "privacy" mode rather than "hands free". Once I've done this once, subsequent calls work fine, routing straight through the car, but only until the ignition's turned off. The next time I start the car up I'm still paired, but calls go through the phone again.
If anyone's got any suggestions, I'd really appreciate them.
Thanks!
Try this
Had similar in a BMW...
Try www.jetwaremobile.com
Thanks, did try that but didn't seem to help, it seemed to be more geared towards additional functions like phonebook syncing rather than just getting a working connection in the first place. Maybe I'll give it another go.
Same Probleme On 207
hi,
I have the same ....
I precise that work fine with the original m650 rom, i search many hours but i found nothing, i try bluetooth toggle with no effect...
please help us !
thank for dev for everything they do !
RE
I try many combinaison so:
if i want to use my bt car kit, i'm forced to validate hands free option at every phone call...
I think it's btaudiotoggle the cause of mly problem, he is included in the aje rom...
you think it's possible ?
TangerineTractor said:
Had similar in a BMW...
Try www.jetwaremobile.com
Click to expand...
Click to collapse
Thanks TangerineTractor!
I fixed the problem I have with car kit of OPEL ANTARA using the software you said. It works disable sending Phonebooks.
I am having a similar problem with Wizard Mobile 6 cooked ROM. Before with the official O2 ROM on my Xda Mini S, it worked fine. The car would automatically recognise the phone whenever in proximity, and all calls would go through the speaker.
Now, I have to press the car kit's button (Nokia Bluetooth) each time I get in the car, to tell it to search for devices - i.e. the phone doesn't automatically announce its presence.
So, is there a different Bluetooth Stack we can try?
My Orbit works fine with my Nokia CK-7W using a B&B ROM.
Thanks, and yep that's the same car kit I have.
When you get in the car, do you have to do anything, or does the car kit automatically detect the phone? Mine doesn't since getting the Wizard Mobile 6 cooked ROM.
Do you know what Bluetooth Stack you use, and if I can download it anywhere for the Wizard?
No, just switch on the ignition key and away it goes. Also if the car kit is set as the default hands free if the phone rings it should try to connect to the car kit.
The radio I am using is 2.95.90 I have no idea what bluetooth stack it is, Tom Codin cooked the ROM, he will know.
Okay thanks. Does anyone know if the BT Stack is part of the Radio ROM? If so I'll just try a different Radio ROM.
Has anyone had any luck with using their Hermes in a Ford, using their 'Advanced Bluetooth' car kit?
I have paired my MDA Vario II, running Schaps 3.60 WM6, with my new Ford Focus. This shows up as 'Ford Audio' on my phone. Incoming calls are now routed through the car stereo, and I can access my voice tags for outgoing calls by saying 'Mobile, Name'. So far so good!
The issue though, is with the Sim Access Protocol (SAP) routine. I have managed to access the phone contacts list just once, and that was after a wait of over 30 mins. I have never seen the list of recent or dialled calls. So all incoming calls show as just raw numbers, rather than names.
I have ensured that I transferred my main contacts to my Sim Card. I made sure that SAP was selected. I even downloaded and installed the Jetware SAP enhancement program. All to no avail.
Has anyone got SAP running, speedily, with a car kit?
Dont kno how much use this is going to be, but try using the rom Black Majic by JasJamming.
That is the only rom ive ever got to work properly with my Parrot 3200LS Car Kit.
I have a Focus ST with the advanced bluetooth car kit and have been able to access my contacts list when using Sleuth's ROM - but not the recent call list etc. I did not need to move my contacts to the SIM to get that though.
I've recently switched to FunKey's 3.62 ROM and while the car kit works for audio etc. I no longer get the contacts - having said that I haven't installed the BT SAP cab so no real surprises there.
To be honest I'm just glad the car kit works for audio - I've always had problems with the Tytn and car kits so it's very nice that it works at all
Thanks, jaso2005 and forza, for your comments. I think that WM6 has got a way to go to catch up even with Symbian, as far as car kits and SAP is concerned.
From your posts, it would seem that some ROMs are getting there.
I see that Shap's latest (4.00 Beta 2) contains the latest SAP utility and, as I am running his 3.60 ROM at the moment, I think I will wait for the 4.00 final release.
Schaps is just requesting people try his new beta ROM that has this feature.
Just throught I would add my name to the list of people having problems getting their Hermes to work with their Ford bluetooth carkit....
I've got my new s-max, but have not been able to get the phone work work with it. I can discover the car from the phone (ford audio) and pair it up. However, when I go to make a call, the phone does not think there is a carkit present. Also, if I go to the carkit setting on the ford computer it says it can't see a phone connected.
Hissing Syd & Forza, did you do anything special to get yours to work with the advance bluetooth? I've tried a couple of different ROMs and am now running Schaps 3.6a (have also tried 4)
thx
caspartfg said:
Just throught I would add my name to the list of people having problems getting their Hermes to work with their Ford bluetooth carkit....
I've got my new s-max, but have not been able to get the phone work work with it. I can discover the car from the phone (ford audio) and pair it up. However, when I go to make a call, the phone does not think there is a carkit present. Also, if I go to the carkit setting on the ford computer it says it can't see a phone connected.
Hissing Syd & Forza, did you do anything special to get yours to work with the advance bluetooth? I've tried a couple of different ROMs and am now running Schaps 3.6a (have also tried 4)
thx
Click to expand...
Click to collapse
I had the same problem with mine initially. The handbook says that you merely have to pair the phone, which you have done. Not true - you have to physicaly make your Hermes the 'Active Phone'. First, select Phone. Then press Menu. Then scroll to Select Active Phone, let it find your Hermes, select it, and it should work.
The selection of Active Phone is covered later in the handbook. It should be at the start.
Good luck!
Syd,
you'll love this, but the dealer forgot to put the bluetooth manual in the glove box. (I'm waiting for it come come through...) In the mean time, any chance of giving me some instructions on how to setup an active phone?
Thx
caspartfg - Have you activated the Bluetooth SAP?
In Schaps latest rom's 3.60a and 4.00 Beta this is in Programs > System Tools > SAP Settings
yes, I have tried with the SAP setting turned on and off. The problem I have is that the car cannot see the phone, even though it is paired.
Also, the phone does not attempt to make use of the handsfree when I make a call.
Thank you all for your suggested
C.
Make sure you have ticked the option to make the phone discoverable (Start/Settings/Connections/Bluetooth - Mode tab; "Make this device visible to other devices")
Hissing Syd is spot on - you do have to select it after the pairing. When I do mine, I delete any existing pairings on both the car and the phone. Soft reset the phone, turn the car radio off and then on. Then (with the radio switched on) search for bluetooth devices on the phone, pair with the "Ford Audio" service. Turn the radio off and then on, press Phone, press Menu, scroll to Select Active phone and press the centre button on Phone1. It can take a few minutes to finally pair up, but it does get there in the end!
I've turned on SAP on the FunKey ROM but still don't get contacts etc. coming through on the car kit - but as I said I'm not that bothered to be honest!
caspartfg said:
yes, I have tried with the SAP setting turned on and off. The problem I have is that the car cannot see the phone, even though it is paired.
Also, the phone does not attempt to make use of the handsfree when I make a call.
Thank you all for your suggested
C.
Click to expand...
Click to collapse
Thank all, just to let you know the phone is working with the carkit.
I've been able to make / receive calls. I have also been able to browse the contact list on my phone via the info on my convers+ dash. Also when calls come in, they show the name of the caller.
I'll do some more testing when I get the manual through, but all of the functions the carkit provides seem to be supported. I've also been able to make voice dialiing features of the car..
I love the fact you can talk to the ford and instruct it around the phone, radio, climate control, etc....... feels like a middle age version of knight rider.....
Thx all
C.
Having the same problem with an Orbit (Artemis)
caspartfg,
I'm having exactly the same problem with my Artiemis - have put something in that Forum but no reply yet
http://forum.xda-developers.com/showthread.php?t=340609
Also - what Bluetooth manual ! The standard mondeo manual has some info but not much. Am I missing the bluetooth manual as well?
jftilbury,
Took quite a bit of fiddling around, but got there in the end....
Which head-unit do you have? - Mine is the Sony version that comes with the new s-max titanium.
To answer your specific questions:
1) yes, there was a separate bluetooth manual. I had to ring the dealer and he posted me a copy
2) The thing the car manual didn't tell me about was that there is a second step to the pairing of the phone in which you need to active the phone in the head unit.
i) make sure the phone is discoverable in bluetooth
ii) pair the phone with head unit as you described above.
iii) select the phone setting on the head unit
iv) press 'menu' (I think) and then in one of the options you can set the phone to active
after that, it all worked a treat for me..... Let me know if this works for you. If my instructions are dodgy, I'll double check
Spot on !
Excellent, that worked a treat. I also have the Sony CD unit, but in the Mondeo, and it is now phoning anyone that will pick up the phone.
The phone book is now going across OK. My problem is that as my company's entire phone book gets sync'ed onto the XDA I now have around 500 numbers on the car menu making it unusable. Never mind, the phone works which is the main thing.
Voice recognition next...
Thanks for your help, I'll point the other thread here as well.
jftilbury said:
Excellent, that worked a treat. I also have the Sony CD unit, but in the Mondeo, and it is now phoning anyone that will pick up the phone.
The phone book is now going across OK. My problem is that as my company's entire phone book gets sync'ed onto the XDA I now have around 500 numbers on the car menu making it unusable. Never mind, the phone works which is the main thing.
Voice recognition next...
Thanks for your help, I'll point the other thread here as well.
Click to expand...
Click to collapse
I'm pleased that we helped solve your problem. My question to you, which ROM are you using? I still have problems with uploading the phone book to the Sony unit with my Schaps 3.60a ROM.
ROM version
I am using the standard ROM downloaded from the O2 support site at:
http://xda.o2.co.uk/xdaOrbitSoftware.html
This sends the download to the HTC site, with the file name:
RUU_Artemis_O2_UK_3.4.206.2_4.1.13.28_02.67.90_Ship.exe
The numbers I can find are:
CE OS 5.2.1238 (Build 17745.0.2.3)
ROM version: 3.4.206.2 WWE
ROM date: 4/18/07
Radio version: 02.67.90
Protocol version: 4.1.13.28
ExtROM 3.4.206.101
Not sure if this helps as it is for the Artemis.
Hissing Syd said:
I'm pleased that we helped solve your problem. My question to you, which ROM are you using? I still have problems with uploading the phone book to the Sony unit with my Schaps 3.60a ROM.
Click to expand...
Click to collapse
I am using Schaps 3.6a... The extra piece I did was to go into the advanced config, bluetooth tab and turn on OBEX. You should also make sure Remote SIM access is turned on in the SAP application.
Hope this helps, worked for me......
C.
Mine in fact worked too well - sending across all 500 numbers my company sync's onto my handset, making the phonebook unusable on the car.
However a Ford forum put me onto this bit of code:
http://www.jetwaremobile.com/
which does exactly what I want allowing me to create a category of people I want to appear in the car phonebook and away we go.
caspartfg said:
I am using Schaps 3.6a... The extra piece I did was to go into the advanced config, bluetooth tab and turn on OBEX. You should also make sure Remote SIM access is turned on in the SAP application.
Hope this helps, worked for me......
C.
Click to expand...
Click to collapse
Thanks very much for that crucial bit of info. Since I started this thread, I have changed ROM to RUU_Hermes_TMO_UK_3.60.110.4_6275_1.50.00.00_108_Ship.exe and, by enabling OBEX, it all works a treat.
I recently purchased an AT&T Tilt (TYTN II phone) with Windows 6.1 Dutty Series... since my motorola KRZR took a dump on me....Quite an upgrade...I am trying to use the Motorola H700 Headset from my KRZR on to my HTC, I can get the headset located in the device menu but I cant get the HTC to pair up with the headset on a continual basis. I am also having an issue connecting to a Bluetooth GPS Antenna. I can locate it it just the same as the headset but it wont pair to the HTC nor ask an authorization code.
Is this a bluetooth glitch? Can I somehow reload the driver for the bluetooth? Perhaps I am doing something wrong but I never had a problem linking bluetooth devices before.....
On a separate note....I tried doing an activesync via bluetooth on my Dell Laptop and it again can be located on both ends but I can get any services to work on either side...
Help?
I have just received a new HTC TyTN II on Orange that has the same problem. My old one (windows mobile 6.0) had no problem with my Motorola H12, but the new one (Windows Mobile 6.1) can't keep the pairing, and I have to turn Bluetooth on an off to get the connection. Always have to enter the passcode.
Version data is:
CE OS 5.2.19212 (Build 19212.1.0.3)
Processor: MSM7200-400MHz
ROM version 1.65.16.25
G 25.83.40.02H
D 3.28.00.00
Any help /advice much appreciated!
O.
Pyper,
i don't know how it is on the H700, but on the BlueAnt Z9, you have to hold down the power switch until the LED on the headset blinks red very rapidly, when it does this, the headset is in pairing mode. then you can pair the phone with the headset. try something like this with the H700. if you can, find out how to get the H700 into pairing mode before you try to pair it up.
hope that helps!
Pyper70 said:
I recently purchased an AT&T Tilt (TYTN II phone) with Windows 6.1 Dutty Series... since my motorola KRZR took a dump on me....Quite an upgrade...I am trying to use the Motorola H700 Headset from my KRZR on to my HTC, I can get the headset located in the device menu but I cant get the HTC to pair up with the headset on a continual basis. I am also having an issue connecting to a Bluetooth GPS Antenna. I can locate it it just the same as the headset but it wont pair to the HTC nor ask an authorization code.
Is this a bluetooth glitch? Can I somehow reload the driver for the bluetooth? Perhaps I am doing something wrong but I never had a problem linking bluetooth devices before.....
On a separate note....I tried doing an activesync via bluetooth on my Dell Laptop and it again can be located on both ends but I can get any services to work on either side...
Help?
Click to expand...
Click to collapse
I've been having issues with my HTC TyTNII with the official 6.1 ROM and the Jabra BT500V headset. The pairing is automatic in WM6.1. The bluetooth causes the phone to be sluggish and causes call drops if the call's picked up within 3 rings or the call's picked up before it rings on the phone (Yes, Jabra rings first before the phone does). I've escalated this issue to HTC SEA Support and they've advised me to disable Bluetooth and test which I did for the past 3 months :|
I have 3 Jabra headsets (BT250, BT500, BT500V) and all are having the same issue with this ROM. I'm quite skeptical to buy another brand just for testing purposes. Do anyone else face the same issue? HTC SEA has fixes available specific for Jabra / Samsung headsets on Touch Cruise but strangely not on TyTN II
Finds BlueAnt S3 but won't pair
My BlueAnt ST3 pairs fast with a Motorola Razr V3xx but the HTC with WM6 Professional, finds the ST3, prompts for the password (0000) but always fails. On the Razr, I touched the enter key but on the HTC it only beeps. I tried the O.K. key too. The message I am getting after touching "Next" says invalid password or connection. Yes, Bluetooth is turned on and the ST3 as well.
Any ideas anyone?
Hello:
Some time ago I bought an unbranded HTC KAISER with WM6.1:
rom version: 3.29.422.1 WWE
rom date: 05/20/08
radio version: 1.65.20.29
protocal version: 25.88.40.04H
BT VERSION: 2.0/2.0+EDR
BT ADDRESS: 00:17:E8:2E:9F:A1
Anyway, I'm still having bluetooth issues with the unit. The BT works great with BlueAnt Z5i on streaming and music listening but I can't get it to work on phone calls, incoming or outgoing. No sound in the headset nor out of the Mic. Same problem with new Jawbone on calls and a Motorola HS860. Before I waste any more money I thought I'd ask about possile regedits etc. to correct this problem? Or perhaps I should consider new Roms?
Ben lurking here and reading and re-reading and getting more confused..anyone have suggestions or can point me to a probable solution?
Thanks for Listening
I finally got it to pair with BlueAnt ST3 and Motorola T305
BlueAnt ST3: I had to delete the ST3 connection, and get the ST3 in "pairing mode" then have the phone search for bluetooth devices. Doing this I got the password screen and entered the 0000. Driving around testing this, it was not as good as the Motorola Razr V3xx. Not always answering, dropped calls ect.
Motorola BT Speaker: I just received a Motorola T305 BT speaker, same process to get it paired. No voice activated call function yet. Just the two beeps, one indicating it is ready for a command and then it beeps again, and clicks out. The ST3 would talk to you and ask for confirmation.
What I have learned so far, the trick is to get the speaker phone in the pairing mode, so the Kaiser phone will prompt for password.
I am going to sell the Kaiser and buy the HTC touch HD and hope for better bluetooth functionality and reliability.
Hmmm... Actually I have no problem pairing any of the BT items I mentioned, just the handsfree doesn't work in all. Thanks for the reply...
I have a PC computer in my car that I use for many thing and I want to integrate my phone into it by using a Bluetooth voice gateway to play the sound over the speakers in the car and use a mic to talk into. Obviously since this is the Rhodium forum I have a Touch Pro 2 (by Verizon) running OEM ROM. The PC is running XP SP2 with Widcomm bluetooth stack.
Making calls I have no problems. When I'm in range it connects and when I make a call its flawless. The problem is when I get a call. When a call comes in it rings once then answers without me doing anything. And no its not the auto answer feature on a headset (i know that would be the first reply if i didnt say that). The issue is that even though there is a BT link to the PC the voice gateway doesn't connect until in a call. When i make one it connects when i hit send to dial, when i receive a call it connects when it starts to ring and once there is a connection it answers. It would be bad if im driving and someone calls i dont want to talk to or something and it just answers without me knowing.
I tested this theory with my regular BT headset. I had the headset off and I called the phone and once it started ringing i turned on the head set and sure enough it answered.
My question is how do i get it to hold a solid connection all the time like a normal BT headset would? Or make it not answer once a headset is connected?
I tried using the BlueSoleil BT stack also. This one worked ok once everything was connected but every time I came back in range of the PC or turned the PC on I would have to manually connect the voice gateway again.
Thanks for any help!
Edit: oh yea, also I had the same issues with my XV6800 (Titan) and never got it to work right either.
anyone have any ideas on this?
no one on this forum has tried this other than me?