Related
I searched and looked eveywhere, I've been a leech here for a while since my wife got her 8125 and then I got my 8525. I'm running TNT 2.0 and I'm trying to use wm5torage at work because I can't install activesync and don't have an SD reader. The program works fine but if I try to transfer a large file I get an error that says "Cannot Copy: Data Error (cyclic Redundancy Check) " Has anyone had this problem? I am kinda new to the smartphone thing but I'm very familiar with flashing and homebrew due to being addicted to my PSP for well over a year. Any help would be great or if I missed something in my search, I'm sorry please correct me.
got the same problem ....
I also have this problem, but it's not related tot the TNT ROM. I used Pandora kitchen where the problem also appears by me.
I already tried formatting the SD card with Pocket Mechanic and Resco File explorer, tried FAT and FAT32, all with no luck....The only sol;ution wich worked for me was Softick Cardexport II. But this one is slow...real slow...BUT it works(program is not free).
I hope someone cann tel us the solution
It happens sometimes. You can enable (in the PC) the "Optimize for Performance" in the Device Manager -> WM5torag disk properties -> Policies to make it happens less times, but will got problems too.
Our Hermes is a unique machine, for the good and for the bad.
my x01ht cannot use with wm5torage...when i active wm5torage and connect to pc...it has a ballon that "your hardware might not working manually" ...what's the problems ???
i use schap 3.60a rom (wm6)
StuntA50 said:
I searched and looked eveywhere, I've been a leech here for a while since my wife got her 8125 and then I got my 8525. I'm running TNT 2.0 and I'm trying to use wm5torage at work because I can't install activesync and don't have an SD reader. The program works fine but if I try to transfer a large file I get an error that says "Cannot Copy: Data Error (cyclic Redundancy Check) " Has anyone had this problem? I am kinda new to the smartphone thing but I'm very familiar with flashing and homebrew due to being addicted to my PSP for well over a year. Any help would be great or if I missed something in my search, I'm sorry please correct me.
Click to expand...
Click to collapse
copy the file not to the SD card itself but in to any directory that you have (or create) on the SDcard
regards
edward
I'll try that today and update if any luck....
Thanx!
what's about my problems ???
evisu said:
my x01ht cannot use with wm5torage...when i active wm5torage and connect to pc...it has a ballon that "your hardware might not working manually" ...what's the problems ???
i use schap 3.60a rom (wm6)
Click to expand...
Click to collapse
Anybody known ???....
VivaErBetis said:
It happens sometimes. You can enable (in the PC) the "Optimize for Performance" in the Device Manager -> WM5torag disk properties -> Policies to make it happens less times, but will got problems too.
Our Hermes is a unique machine, for the good and for the bad.
Click to expand...
Click to collapse
that worked for me.
New version 1.78beta2
List of changes:
- added the long-awaited option to lock card only when USB cable is actually attached (so when you will disconnect the device, it will automatically see the card again, without the need to deactivate WM5torage).
- fix of the regression bug on HTC Athena, should reliably work on long transfers again (1.73 was ok, 1.75 was not)
- added the feature to automatically disable "Advanced Network Functionality" on activation. This should remove the need to do this manually on Samsung-based devices, but having no such device I can not check - so I will depend on your feedback.
Can be downloaded here:
http://www.modaco.com/index.php?act=attach&type=post&id=22431
NOTE: Need to be registered in MoDaCo to download.
***
I've tested it for a while:
- added the long-awaited option to lock card only when USB cable is actually attached (so when you will disconnect the device, it will automatically see the card again, without the need to deactivate WM5torage).
Click to expand...
Click to collapse
Works like a charm but you need to check the option "lock card on attach only" (I forget to do it the first time).
- added the feature to automatically disable "Advanced Network Functionality" on activation. This should remove the need to do this manually on Samsung-based devices, but having no such device I can not check - so I will depend on your feedback.
Click to expand...
Click to collapse
Works like a charm
Hey,
I made a base rom for the Trinity(based on fake 20000 build), 'everything' works nice and really really fast, got 90MB free Storage(89.44), 34MB(33.95) free Ram after boot and it boots in 24 secs, which is nice.
But some apps which depend on phone do not start(I think), like calendar, contacts, and the phone itself( the device turns itself on on incoming call). Tasks returns "No Program memory available...". Backlight settings, Clear Storage don't start. Device Info isn't populated.
Wireless plugin and phone icon(which displays: T! ) on the title bar both show "No Service".
SMS is working, and I can open the Phone settings, select the network etc.
Can anyone give me a help here? Any idea of what I may have deleted and shouldn't have?
( Can't connect through activesync and pressing power for 5 secs doesn't shutdown the device too, after confirming the busy icon shows up but nothing happens lol )
Since the idea was to create a base rom as clean as possible, I removed:
- almost all htc apps, even the camera(random access, task manager, dialer, comm manager, audio manager, media hub, etc)
- .net & sqlce
- all help files
- arcsoft mms
- office(incl onenote)
- more small bundled apps
cleaned initflashfiles( I know the invalid entries cause no prob, but I did it anyway )
thx in advance
http://rapidshare.com/files/81890618/RUU_signed.nbh
Apoc said:
Hey,
I made a base rom for the Trinity(based on fake 20000 build), 'everything' works nice and really really fast, got 90MB free Storage(89.44), 34MB(33.95) free Ram after boot and it boots in 24 secs, which is nice.
But some apps which depend on phone do not start(I think), like calendar, contacts, and the phone itself( the device turns itself on on incoming call). Tasks returns "No Program memory available...". Backlight settings, Clear Storage don't start. Device Info isn't populated.
Wireless plugin and phone icon(which displays: T! ) on the title bar both show "No Service".
SMS is working, and I can open the Phone settings, select the network etc.
Can anyone give me a help here? Any idea of what I may have deleted and shouldn't have?
( Can't connect through activesync and pressing power for 5 secs doesn't shutdown the device too, after confirming the busy icon shows up but nothing happens lol )
Since the idea was to create a base rom as clean as possible, I removed:
- almost all htc apps, even the camera(random access, task manager, dialer, comm manager, audio manager, media hub, etc)
- .net & sqlce
- all help files
- arcsoft mms
- office(incl onenote)
- more small bundled apps
cleaned initflashfiles( I know the invalid entries cause no prob, but I did it anyway )
thx in advance
http://rapidshare.com/files/81890618/RUU_signed.nbh
Click to expand...
Click to collapse
did you remove all the dll and exe from within their folder for exsample in baseapps you have several folder named something like caldll.dll or beam.exe
but inside these folders are some files imageinfo.bin imageinfo.text and some s000 s0001 and the dll or exe file try to remove all these dll and exe that are inside folder like these then when you are finished use the G´Reloc from this thread
http://forum.xda-developers.com/showthread.php?t=331094
hopefully this will help but maybe when you removed the htc dialer it had some dll that are needed to solve all the problems you have with the phone
@gullum
I edited the dump directly, didn't use package tools, and I deleted both the file and the folder, but didn't use G'Reloc, I'll rebuild the rom using package tools and G'Reloc then.
Will also do some tests to see if the problem lies in the registry, or missing files.
Thanks for your reply.
1) you should use package tool
2) remove files that you want to remove
3) use G'relock only when you need to port another build
btw. Probably you've deleted many usefull files.
mun_rus said:
1) you should use package tool
2) remove files that you want to remove
3) use G'relock only when you need to port another build
btw. Probably you've deleted many useful files.
Click to expand...
Click to collapse
Thanks for your reply, that's what I'm doing now. I'm almost positive I didn't remove anything essential.. but perhaps I have, I used cabs and oem packages to know what to remove, using package tools on the dump doesn't give me the reg entries(unless I'm missing something), and consecutive edits of the rom will leave a LOT of junk on the registry, initflashfiles and filesystem.
update: I think I removed the phone canvas( phcan*.dll ), thought it was only used by that skin, but since it's being listed as missing from SYS\OEMAPPS.. then again, officeres is also under that same entry lol.
Thanks again to everyone who's helping.
Hi,
I'm experiencing problems with PocketIE.
Simply it doesn't not load pages: as soon as I tap Go or I give Enter, it says "Connecting..." in the bottom bar, then 0 KB, then nothing again, and does not load anything!
It simply stays idle on the default home page!
Every other application is able to use my internet connection.
Any suggestions
Ciao, ErMeglio
Looks like you have a connection issue: problem is not PocketIE, but your PDA don't connect to internet.
Just to be sure, try istalling other browsers: OperaMini, etc. I bet, other browsers will not connect, too.
Try to check internet connection
ErMeglio said:
Hi,
I'm experiencing problems with PocketIE.
Simply it doesn't not load pages: as soon as I tap Go or I give Enter, it says "Connecting..." in the bottom bar, then 0 KB, then nothing again, and does not load anything!
It simply stays idle on the default home page!
Every other application is able to use my internet connection.
Any suggestions
Click to expand...
Click to collapse
what your rom version?
ErMeglio said:
Hi,
I'm experiencing problems with PocketIE.
Simply it doesn't not load pages: as soon as I tap Go or I give Enter, it says "Connecting..." in the bottom bar, then 0 KB, then nothing again, and does not load anything!
It simply stays idle on the default home page!
Every other application is able to use my internet connection.
Any suggestions
Click to expand...
Click to collapse
This happened to me when i imported my config XML using advanced config.. the only way to fix it is to hard reset i think.
I discovered this because I wanted to install signed OperaMini in my own language as I always did: downloading from IE by Mobile. That's the only way to get it signed, since suggestions I found on other threads didn't work(MANIFEST modify).
The fact is this situation is after an HR and Internet works perfectly: WLM is listening "as items arrive" and so my Exchange email set in Active Sync.
BUT, this is also after me messing with SDConfig.txt...I've set all my usual apps and some xml and this:
veyka said:
This happened to me when i imported my config XML using advanced config.. the only way to fix it is to hard reset i think.
Click to expand...
Click to collapse
actually makes sense.Infact one of the XML I make SDConfig.txt import is the one exported from AdvanedConfig, just after my personalizations. I don't remember if I did import it again by the app another time after HR, but I don't think so. Did you try importing it differently(SDConfig, other apps)? I'd like to understand if it's the xml itself, or the importing from the AdvConf app.
I've just noticed that the index file of IE cache (on sd according to my xml) is somehow "locked": I can't delete it. It could be IE can't write there too.
I'm doing a complete loong scan disk of my Micro by Windows Vista (even if I never had a problem, it always complains about corruption, so let's try and see what Mr. Bill can do )...then I'll delete cache from pc and try again...
I've much to learn to get my SDConfig work in all its parts
@abusalza
Yes, I'm using PDACornerPro.V22 but posted separately because this issue was not there at first, so it's -99%- sure it isn't your rom's fault, thanks for interesting
As soon as I get everything working through SDConfig, I'll go for final v23, I see you're uploading
[UPDATE]
Ok, just did the scandisk and it found 450MB of damaged files! I really don't know where and how, but I deleted the so-big FOUND.000 directory it made and didn't really understand where all that stuff came from.I deleted any file into IE's cache dirs too but no luck with IE, same matter.
Will flash V23, make SDAutoRun do its duties and see...
If it's confirmed to be an AdvConf matter, why don't we discuss it with Schap?
Well, just to let you or someone who comes here later know how this story finished, I found which was the matter!
With AdvancedConfig I changed the Application Data directory and moved it to storage card.
Seems IE didn't like that tweak: I simply changed it to \Application Data again and woilà, IE started working
Thanks for pointing me to the solution
Ihave Same Problem But When I Using Rom Wm5 With Original Cingular Ie Work Fine But When I Upgrade To Wm6 Or At&t, That Happen Again, I Try Install Opera It's Work Fine
Hi, my bluetooth does not seem to work on the device. If I reset it i get the error message on start up saying 'BTTRAYCE' is not a vlaid Pocket PC application. Is my unit faulty. I have thought about doing a hard reset on the device but wanted to check with you guys if there is a simple fix, the unit needs replacing? or if the hard reset would work. If I was to do the hard reset what can I use to backup all my contacts with there facebook links etc and will the facebook links still exist?
Bladesharp said:
Hi, my bluetooth does not seem to work on the device. If I reset it i get the error message on start up saying 'BTTRAYCE' is not a vlaid Pocket PC application. Is my unit faulty. I have thought about doing a hard reset on the device but wanted to check with you guys if there is a simple fix, the unit needs replacing? or if the hard reset would work. If I was to do the hard reset what can I use to backup all my contacts with there facebook links etc and will the facebook links still exist?
Click to expand...
Click to collapse
You can use a program called Sprite Backup, although its not free. That will backup a lot of things, but to be honest, its probably best to start from scratch as it backs up all registry changes too, which could be the problem for you.
My bluetooth works fine, what part are you having trouble with?
Bluetooth Issues
I am having the same problem.
I have narrowed it down to tomtom installation (no bluetooth issues until tomtom is installed)
I have tried with TT7 910 9185 as well as TT7 445 and after the reboot the same error occurs.
I have also tried installing it on the memory card, and hard resetting it, however, the TomTom doesn't appear to talk to any Satellites.
I installed Tomtom 7.910.9185 and it says "Unable to start. Not enough memory" or similar. I installed it from cab on my 8GB Storage Card in the same way that worked perfectly on my Raphael.
The point of telling you that is my bluetooth is still working perfectly.
As for you Bladesharp, surely if you Activesync all the relevant links and details will remain with your contacts? I'd say a hard reset will determine if it's a hardware issue.
rb14 said:
I installed Tomtom 7.910.9185 and it says "Unable to start. Not enough memory" or similar. I installed it from cab on my 8GB Storage Card in the same way that worked perfectly on my Raphael.
The point of telling you that is my bluetooth is still working perfectly.
As for you Bladesharp, surely if you Activesync all the relevant links and details will remain with your contacts? I'd say a hard reset will determine if it's a hardware issue.
Click to expand...
Click to collapse
I'm on 7.915 for TomTom and don't have the issue.
Links to Facebook won't transfer with Active Sync, they are stored somewhere seperately on the phone and are not part of the Contacts program in pOutlook.exe, they are part of Manila which is not transferable. Not sure where it is stored, have been looking now for about 2 months
I came across something similar to this last week after installing TomTom from a CAB, and found this post on a related issue...
http://www.noeman.org/gsm/trash-section/65951-tomtom-7-bluetooth-problems-sorted.html
I deleted the two bluetooth files (BtSdKCE30.dll & BtCoreIF.dll) from the TomTom CAB as described, did a hard reset and reinstalled, and haven't had the problem since. Could be the same issue?
Could someone who has not installed TomTom please post the dates of their BtCoreIf.dll & BtSdkCE30.dll? Mine are both 04/24/08 20:10.
Does anyone know if it is possible to revert to the ROM version of these files WITHOUT doing a hard reset?
If some kind person was able to provide me with the ROM version, can I just overwrite the ones in RAM?
R
These came from my device's \Windows directory, and are dated 14th May. I think they are unaffected by this problem, certainly I don't get the boot delay or BTTray boot crash that seem to be the possible symptoms of this. (Use caution, of course; backup what you can before tinkering in case of disaster.)
Sounds the same as my thread
http://forum.xda-developers.com/showthread.php?t=522373
someone already tried the above files? will it correct the problem?
Thanks for the files.
I am happy to confirm that installing the two DLLs gets BTTrayCE.exe working again.
I just renamed the 04/24/08 versions to .was and use Total Commander to copy the files from my storage card to \Windows and rebooted the phone... ActiveSync wouldn't let me copy them directly from my PC as it said there was already a 05/14/09 version there and it was read-only!
As it rebooted, it complained that BtCoreIf.dll was from an unknown supplier but I just OK'd that and everything is fine. Bluetooth & TTN working.
R.
PS Didn't need to copy BTTrayCE.exe as this had not been overwritted.
Ah, thanks for letting me know. I wasn't sure if the exe was also needed, I only included it since one of the symptoms I was getting was that this wasn't a valid executable; but I guess that was just caused by the corruption of the dll's.
I don't think the DLLs are corrupted, just an earlier version.
Just like the bad old days of Windows 3.1 where installing one package would break others due the installing of different versions common DLLs. Gosh, I feel old!
R.
dicko99 said:
I don't think the DLLs are corrupted, just an earlier version.
Click to expand...
Click to collapse
Ah yes; that makes more sense! I still had a boot delay even with the files from the most recent TomTom version I could find.
Hi there,
i had the same Problem with TT. In my case I also copyed the BTTrayCE.exe. Now I dont get any error anymore but the Bluetooth can still not be started. Can somebody please upload the Original BTTrayCE.exe. Thank you
I did a reset of my Swisscom German Device. Copyed the 3 BT Files and installed the TT7 v7.910.9185 again. After restart of my Device the same BT Error. I replayced the 3 Files with my Original ones and restarted again. New Error comes up "Bluetooth Stack can not be started"
zizzo
Thanks guys a lot. Rewriting those two files solve the problem. Bluetooth works now.
ianjd said:
These came from my device's \Windows directory, and are dated 14th May. I think they are unaffected by this problem, certainly I don't get the boot delay or BTTray boot crash that seem to be the possible symptoms of this. (Use caution, of course; backup what you can before tinkering in case of disaster.)
Click to expand...
Click to collapse
Thanking you very much kind sir. I unzipped these files directly to my storage card in USB mode and just double clicked the exe file and it fixed my bluetooth up for me. (good job as I am a technical biff when things get registry level)
EDIT sorry I thought it did but it didn't just fix it by double clicking the exe. I've hard reset now as I don't really know what I am doing
As said in the thread here:
http://forum.xda-developers.com/showthread.php?t=522373&page=4
There is no need to replace the two files.
Just delete them and soft reset. They will be replaced with the two right ones.
Bluetooth problem with TomTom resolved!
matrixis2day said:
I replayced the 3 Files with my Original ones and restarted again. New Error comes up "Bluetooth Stack can not be started"
Click to expand...
Click to collapse
I had the same and here's what I just discovered and what worked:
I removed the files and expected them to be replaced upon restart. When I checked I noticed a file in the \Windows directory named BtSdKCE50.dll - I had not noticed this before. I (re)moved this, rebooted again and now Bluetooth and FM Radio (!) are working, yay!
hth,
TA2
This fixed my problem. Couldnt delete the old files but copied the replacements over the top and that sorted it. My version of Tom Tom wont work stil but it is 7.5 I think.
I've had exactly the same problem I've tried overwriting the dll's with the files provided in this thread,
Now whilst I don't get the error message, when I try and enable bluetooth, I get "cannot start bluetooth stack" error
Any ideas peeps?
My TP2 Bluetooth is not working
I get an error on Startup - bttrayce.exe is not a valid pocket pc application.
I cannot start Bluetooth from Comms manager.
Anyone else had this?
Everything is fine here.
Maybe a hard-reset would help.
You may have loaded tomtom. there is version that screws the bluetooth. had to do a hard reset on mine. theres a thread on the subject somewhere.
you just have to delete or rename these two files in \windows folder
btCoreif.dll
btSdkCE30.dll
it works for me !
yes I had that problem after tom tom install and fixed it by copying some never versions of the dll's on but couldnt help myself and did a factory reset even though I had fixed it with the dll's!!!
Sweet - thanks dussjp all working now