Develop Bugs

Upgrade to WM6 fails ERROR [260]: CONNECTION

Hi everybody,
I'm stuck trying to upgrade my TyTn to WWE WM6 (HTC_TyTN_WWE_3.54.255.3_6275_1.48.00.10_108.exe).
After following all the steps of the upgrade wizard, the screen of the Tytn goes black and subsequently the ActiveSync connection is lost. After a while i then get the dreaded "ERROR [260]: CONNECTION".
I am running the original ROM (ROM 1.18.255.3) , and active sync 4.5 on Windows XP SP2. I downloaded the WM6 upgrade directly from HTC website after properly registering my device.
I even tried upgrading to SPL version is 2.10.olipro, but i still get the same behaviour.
[EDIT] Another thing i noticed is that when launching the upgrade executable, when it "veryfies informationj on my computer", if the TyTn is already connection via ActiveSync, it automatically resets into bootloader (4 colors window) and i am forced to perform a soft reset before re-trying the upgrade.
Could anybody help me out here?
Thx!

few people have seen this - no solution as yet.

Best workaround is to use the SD Card update method. No USB connection required.

todd_jg, could you please point me out to a procedure for upgrading to WM6 via SD card?
Thank you in advance.

dondobert
There is a description in the WIKI, just go HERE for instructions on how to flash from SD card.
Best wishes

I'm having the same exact problem....
I'll try the SD card method I guess. I'm suspecting it has something to do with how activesync recognizes my phone, because when I just sync normally it doesn't do it as well as previous phones, for example when I plug in the phone it wont auto recognize, I hafta manually start active sync on my computer before it starts.

this is because the usb port in the device is crap...it gets worn and then the cable gets lose....im having the same problem ,it is a nitemare...new usb cable sometime fixes the problem.i have tried 7 new cables the same happens. it gets so bad tha you will be unabled to charge the device,im afraid we got to send the device to htc for repair.

Still nothing...
Just tried for a few hours to perform the upgrade via SD card... but no way!
After reading various threads on the forum i think i tried every tweak and twist in order to have the upgrade via SD card method work (made sure the SD card is formatted as FAT32, not corrupted and with only the HERMING.nbh on it; tried also with SSPL-HERM.exe; etc.) but still no success at all.
Like other users i read of, after entering bootloader, my TyTn just sits there and the only way to proceed is to perform a soft reset.
Any idea?
Has anybody who has the USB upgrade problem been able to succesfully upgrade with the SD card method, or does there seem to be some kind of connection between the two failures?
Thx

@dondobert -
i assumed, you have already tried to uninstall and re-install ActiveSych 4.5 and recreate the synch profile.
OR
try this -
#1. on your phone device goto start-settings-connections-USB to PC
and set the tick mark to Enable advanced network.
#2. synch your device via ActiveSync
#3. do your upgrade OS or Radio
#4. once you are completed the install, undo #1.
Note 1: only do the above steps if you are having continously encountered the lost connectivity to ActiveSynch during the OS or Radio upgrade.
Note 2: your device must has either HardSPL Olipro method or SuperCID

The best way I have found to work around error 260 is
First disable Antivirus software
Next Go into Windows Firewall then exception tab, and search for "Windows Mobile-based Device Connectivity". Check it as an exception.
For the people who use Microsoft Live OneCare,
Go to "Change OneCare Settings" then go to the "Firewall" tab then click the "Firewall Connection Tool" . Make sure the Active Sync/Windows Mobile Device Center is checked on
Good luck
Let me know if this works

dondobert said:
Just tried for a few hours to perform the upgrade via SD card... but no way!
After reading various threads on the forum i think i tried every tweak and twist in order to have the upgrade via SD card method work (made sure the SD card is formatted as FAT32, not corrupted and with only the HERMING.nbh on it; tried also with SSPL-HERM.exe; etc.) but still no success at all.
Like other users i read of, after entering bootloader, my TyTn just sits there and the only way to proceed is to perform a soft reset.
Any idea?
Has anybody who has the USB upgrade problem been able to succesfully upgrade with the SD card method, or does there seem to be some kind of connection between the two failures?
Thx
Click to expand...
Click to collapse
I had this problem, and managed to upgrade with my SD card just fine. In fact, my upgrade died and the device was stuck on bootloader mode.
The SD upgrade method is so reliable I may just do it now for every upgrade.

@dondobert -
on your reply post #8, you have mispelled on the HERMING.nbh file name. it should be HERMIMG.nbh
please verify the file name on your SD card, and rerun the SD procedure.

I had the same 260-error. Fixed:
- Did a "Clear Storage" (factory settings)
- Did all the "settings up your new device"-stuff.
- Did new active sync to computer (vista)
- Flashed just fine from original exe. (And i do have olipro SPL)

I have problem and resolved
Hi I have a same problem but, i just try to upgrade with mobile in boot mode and appears the error, but when connect normally mobile to pc and start upgrade error dissapear, and upgrade full, schap's spanish and radio 1.50 try this method cheers

Had the same problem and got it working
You need to set you TyTn in bootloader (4 color screen) mode and then connect it to the computer. then start loading the WM6 and you should be fine. I had done it using Schaps wm6 and it worked fine...
good luck.

Hi there ...
I had the same Prob with error 260 ...
- After i disabled the "USB-TO-PC" extendet function
- Reboot the PC
- Soft Reset my Vario II
ist works, but i don't know why
I hope it will work on yout decive to ... CU No.Trace !!!

Successful!!!
Thank you all for the great support!
For all of those out there still struggling with the problem, for me it finally worked following hellomotto's suggestion.
Regarding otoro_315 remark: yes, my mispelling int he post, file name on SD card was indeed HERMIMG.nbh.
Thank you all again!
Cheers

Had exactly the same problem. Resorted to SD upgrade - went very smoothly (Official Cingular WM6). However, will keep these suggestions in mind for the future.
I think the SD upgrade probably also eliminates some possible points of failure. According to wiki instructions, SD must be erased except for the img file - takes a bit to transfer 2G to/from SD. Don't know if this is a must - but didn't want to take a chance. Might just buy a cheapie SD just for upgrades.

One more for the SD card method. Extremely quick too ...I was really amazed that a 45MB ROM would flash in less than 5 minutes.
And it worked fine for me WITHOUT even formatting the SD Card first, I just pasted the extracted .nbh file to the root folder and loaded the SSPL file.

You mean the SD card was not erased and there were other files on it? (You don't say that explicitly).
I too was amazed at the speed - the wiki said it takes about 30 minutes - when it indicated complete in less than 10 min, I let it alone for about 15 min. because I thought it was going to do something else!
consul said:
One more for the SD card method. Extremely quick too ...I was really amazed that a 45MB ROM would flash in less than 5 minutes.
And it worked fine for me WITHOUT even formatting the SD Card first, I just pasted the extracted .nbh file to the root folder and loaded the SSPL file.
Click to expand...
Click to collapse

Artemis (XDa) TOM TOM Installlation

Hi all
I hope someone can help me with this I'm using an XDa Artemis and I have TT6. I have previusly copied files from the TT6 SD card direct to my storage card on my device and the system picked up the necessary installation files and sorted it from there.
However every now and then when I started TT6 on the device, it would fail to recognise the location of the maps though the software appeared to be working ok. The resolution to this was to re-set the device and wait for it to reload the software. (a bit of a pain but...)
Just lately the device and or TT have failed to start properly no matter what I do. I have tried re-installing the files, I have removed the TT software from the XDa using add remove progs.
I can not now get the Xda to recognise the newly copied files to a newly purchased staorage card irrespective of whether I install to the device direct or to the storage card when installed in the comuter.
My TT home software does not recognise my device and I'm stumped...
Any advice welcome, particularly in relation to getting the TT Home software to recognise my device and allow me to install the software direct from the C rather thn thru the above methods would be great.
Thanks
Pete

check you setting for the GPS Port in the TT& software. the baudrate should be set on standard 4800 and the com port ist Nr. 4 (usually the one at the top. if it still doesn't run, then try hard-reset your pda and also formatting the sd card and start reinstalling the whole TT6 package

Thx for that, yes it's all ok and I had already done all of that except hard reset. (trying to avoid that as I dont want to spend days re-installing all my other apps).
What I've done is purchase a new card, copy the TT^ data across to it and that seems to have worked (fingers crossed). Since doing this my device has only once failed to recognise TT6 so I'm hopeful....
Cheers
Pete

Copying files no work no more!

Howdy,
Did a search but didn't find topic?
First mistake, Dnloaded and installed latest AT&T 6 Rom to me Hermes!
Second mistake, have Vista Home Prem (ugh!) Build 6000, and
had Windows Mobile Device Center installed and worked on Win Mobile 5. Could copy and paste files to SD card!
Installed on the new Rom, now I tick WMDC > Connect > GO to SD card > to paste file / app etc and get billies
"The copy and paste has failed. The device has either stopped responding or has been disconnected!"
Even tho I can see files on SD card on laptop!
So I uninstall billies WMCD reboot laptop and reinstall WMCD and same error!
Now I can see the files on the SD Card, move the files around on the SD Card but no copy to SD card??????? I don't have a card reader as I used Win 5 and didn't need another reader!
Any suggestions, workarounds (besides getting rid of billies silly junk.)
Help please!

Hi,
Look here, i had similar problems.
After I formatted the SD card, it worked again without problems.
wfg
Starbase64

starbase64 said:
Hi,
Look here, i had similar problems.
After I formatted the SD card, it worked again without problems.
wfg
Starbase64
Click to expand...
Click to collapse
Hey thanks and fast reply,
I will try formatting sd card if I can find a way to back it up to something!
Does anyone know of a free online Back up site that I could back up sc card with Sktools bkup?
WOW have to much great stuff on it from xda forums!
I rally don't mean to add an off topic situation, but this also started when I installed the AT&T Rom. . .
The other problem that I just found out is that the sound is on, I can hear WM player out of device, but don't have sound for Skype with or w/o headset. As I can connect to call, hear the mic on called phone, the caller hears me but I don't hear the called sound on device or head set???? Im using fling and am connected with wifi, to Skype!
At least it's charging off usb sync, which is one thing that works!
If I can't discuss anothe problem with this New Rom here please move to right place and send a forward!
I really like this board, so I don't want to do anything wrong!
Thanks

Hey there,
I did a defrag SD card NO work!
Than I did a format
Connected (thats what it says but not what it does) and copy and past NO go. . . same error!
Tried to install Sk Tools, (from pc to device as before) and no go, same error of disconnected or what ever? And since I can't do a restore form pc to device, no copy, than None of my SD base apps work, Sk Tools, fling, etc!
So is the SD corrupt!
I vista corrupt (that's a dumb Q)?
Is WMCD corrupt that was working before my new Hard Drive replacement!
Or what?
Oh yea thank you for any replys!

I am also have the same problem.
Hello to all,
I am also have the same problem. Not with the sd card but with the build-in memory. I have installed the windows vista with WMDC 6.0.
I think this problem is with the OS or with the WMDC 6.0.
Because I have an another pc with windows xp installed and there is NO problem with it. Copy and past will work perfect.
I having HTC Wizard that is qtek 9100 with WM6, NBD 9.2 installed.
If any one find the solution please let me know also.
Also conection via bluetooth to WMDC 6.0 it also not possible trying to find the solution but no luck . It will work in fine with winxp but not with the vista.
Please help.........
Many Thanks
Srikanth.K

Madefree,
I would suggest a couple of things:
- flash a different rom to your device, eg a WM 6.0 from Schaps.
- review the MrVANX guides (www.mrvanx.org).
Let us know how you get on.
WB

Thanks wacky banana,
Well at least I know its not the SD card as I tried another with the same irritating gates error message!
I uninstalled and reinstalled WMDC three times and still no file transfer> I have to do any transfers with a cardreader! So I don't know if I can do an upgrade on the ROM as I really want to (as ATT 6 was really a downgrade!)
Thanks. . . .
I went to that link and they are upgrading the site. The following is stated at the ever begining . . .
.....Now make sure your device is on and activesync (or for vista users the WMDC) is running on your PC, connect up your device and allow it to sync. When this is done run "RUUWrapper.exe":.....
RUUWrapper.exe wasn't a link to a download so I guess "searching" is on really first on the "how to" list!
Thanks for the links and the reply, greatly appreciate any and all help at this point!
Have a good one!

How to upgrade my Qtek 9100 (HTC Wizard)?
Hello,
Sorry I wrote wrong ROM version. It is NBD 9.2 installed, NOT NBD 9.3.
Thanks
Srikanth.k

Well DUH ATT 6 allowed me to copy to a file, but only to inside the SD card from the PC but not to the card directly (root) w/o a folder to put it in!
Active Sync works but not DUH WMDC (whatever) crashed twice in one day so Im stick with clicking on My PC > than on HTC device, than Active Sync works better than DUH other option billy made!
It's a vista thing all DUH way!
Hey wacky banana took you fine advice and downladed Schaps.WWM 6.1 Pro FULL ROM and with the excellent RRU packed with it got RID of ATT's "stuff"
Still can't transfer to root of SD, unless I do it thru a cardreader, but at least I don't have DUH branded bulk! Just need to delete (turn off duh startup sounds, so everyone around don't growl at me when I reboot!
Mighty fine ROM thx for the suggestion . . . . gotta do a donate!
Later!

Copy file worked!
Hello
The problem was with the K-a-s-p-e-r-s-k-y AV that I was been installed. It was blocking me to copy the files to my PDA. When I uninstalled the app it worked perfect without any errors.
Please anyone know which is the best antivirus.....
Thanks to all.......
Srikanth.K
India

Goin' nuts! Who can help me with this?

Hello all, best wishes for all of you.
I am new on this forum and read many stuff here allready. However i didn't find a real solution yet for my problem to get cab-files installed, f.e.:
I'd like to install Gyrator 2 on my HTC Touch HD (UK) (And other software)
When i try this i get this error:
"The file "gyrator" cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring the file".
The same message occures when i try to do this with other cab-files. GSen was going fine and even CabInstaller did. Net Compact Framework 3.5. installed and ROM version: 1.14.401.3
I copied the cab-files from PC to PPC by dragging it into the Storage Card.
I would really appreciate your help, because im goin' nuts!!!
Tia ....

Hello.
try this:
- make a soft reset and try again to install from the SD card
- make a soft reset, copy the .cab file with activesync to the phone memory (not on the SD card) and try again to install
when this also won´t work I´m afraid you will have to hard reset your phone..

i had same problem
why dont you just use Gsen, same thing, works great! its definately here

BlackMonkey said:
Hello.
try this:
- make a soft reset and try again to install from the SD card
- make a soft reset, copy the .cab file with activesync to the phone memory (not on the SD card) and try again to install
when this also won´t work I´m afraid you will have to hard reset your phone..
Click to expand...
Click to collapse
Didn't work either ... A hard reset? Uhm .... Don't like that, i hope and will wait first for a solution ...

patterns said:
i had same problem
why dont you just use Gsen, same thing, works great! its definately here
Click to expand...
Click to collapse
As said it is not only Gyrator but it occures with more cab-files. The rotate is not my only goal, therefor i surely could use Gsen, but Gyrator 2 cn do much more. The same with other 3rd Party's ...

Use Advanced Configuration to make sure that your security warning is disabled.
What .cabs are you trying to install?

Problem SOLVED!!
AllTheWay said:
Use Advanced Configuration to make sure that your security warning is disabled.
What .cabs are you trying to install?
Click to expand...
Click to collapse
Problem solved! The way i used CabInstaller was wrong. Instead of open the CaBinstaller first and then adding the cab-file and destination path, i double clicked on the cab-files first and then it won't work, because i gave CabInstaller permission to take over the control of installing cab-files
Thank you anyway for thinking with me ..

Great to hear you solved your problem!
<off-topic>Could you please change your subject in the initial post? subject is supposed to describe what the thread is about like "unable to install CAB files" or something like that...thanks<off-topic>

[SOLVED] Disk Drive Mode with Xbox

With the new 2.03 official ROMs Xbox 360 no longer recognizes the Diamond in disk drive mode.
SOLVED: I finally figured it out! The issue has to do with the asyncmac.dll file so I created a CAB with a fixed version. Let me know if it doesn't work for anyone (worked for me!).
http://www.megaupload.com/?d=BSEUUF7L

try this
Hi
Try this: Start --> Settings --> Connections Tab --> USB to PC --> Untick "Enable advanced network functionality" and ensure the "Disk Drive (Faster file transfer)" is ticked/marked.
Leave the Ask about connection type ticked if you frequently connect your Diamond to your PC for activesync features.
Good Luck!!
D

aussie1234 said:
Hi
Try this: Start --> Settings --> Connections Tab --> USB to PC --> Untick "Enable advanced network functionality" and ensure the "Disk Drive (Faster file transfer)" is ticked/marked.
Leave the Ask about connection type ticked if you frequently connect your Diamond to your PC for activesync features.
Good Luck!!
D
Click to expand...
Click to collapse
Thanks for your suggestion. I've already tried this but it doesn't make a difference unfortunately. I've also tried replacing the USBToPCPopup package with older versions but this also has no effect. Any other suggestions?

Ive been going through the same s¨*t, xb360 wont recog my Diamond.

This is awful, I use my Diamond in disk mode on my 360 all the time !
Doesn't anybody know how to solve this problem?

NeoGreendawg said:
This is awful, I use my Diamond in disk mode on my 360 all the time !
Doesn't anybody know how to solve this problem?
Click to expand...
Click to collapse
Ya, it really is frustrating! Anyone have any other ideas please?

stopped working with me too now

prsnow said:
With the 2.03 official ROMs my X360 no longer recognizes my diamond in disk drive mode. I never had this problem with 2.00 and older ROM versions.
Does anyone know all the files involved with using the disk drive mode?
I've already tried replacing these files with older versions but with no success:
SDHC.dll
SerialUSBFn.dll
msm7500usbfnhs.dll
Thanks
Click to expand...
Click to collapse
hey frnd. am sorry i don have a solution but i do have a question if you guys could ans. i was planing to buy xbox. and am wondering dat is it possile to use diamond's 4gb storage memory as the memory card for xbox to save games and al? so dat i buy xbax core and use this diamond storage in place of buying a storage for xbox?

Me too I too want a solution fer this problem...... can't anyone help...

Revert to the old rom till a fix for the new is found and updated

try with installing wm5storage.
set NAND and active.

Xbox Memory card
Hey Guys! NO you can't use your diamond or any external HDD as a memory card for the Xbox. The USB ports i have been informed are read only. I regularly connect my htc to the xbox and it doesn't allow you to save to it.

sunnyin86 said:
hey frnd. am sorry i don have a solution but i do have a question if you guys could ans. i was planing to buy xbox. and am wondering dat is it possile to use diamond's 4gb storage memory as the memory card for xbox to save games and al? so dat i buy xbax core and use this diamond storage in place of buying a storage for xbox?
Click to expand...
Click to collapse
The core comes with a 20GB if its old or a 60GB if its new!

The Core pack actually got replaced by the Arcade pack and it includes a 256MO memory card not a hard drive. The hard drives only come with the Premium and Elite packs.

i have always connected my diamond to my xbox360 to view the content of diamond storage. now only with rom 2.03 it dont work

It works perfectly with my PS3 Even via Bluetooth

gioiellino said:
i have always connected my diamond to my xbox360 to view the content of diamond storage. now only with rom 2.03 it dont work
Click to expand...
Click to collapse
Same its definitely a ROM issue.

gioiellino said:
try with installing wm5storage.
set NAND and active.
Click to expand...
Click to collapse
I tried this but it made no difference. I'm guessing WM5torage accesses the USB for disk drive mode the same way HTC's USBtoPC app does...

SOLVED!
I believe I have found the cause of the problem along with a solution. First post has been updated!

prsnow said:
I believe I have found the cause of the problem along with a solution. First post has been updated!
Click to expand...
Click to collapse
HEY!! it worked ausomeee!! thanks alot! just a little curious as to why it didn't work on the xbox b4 the fix? doesn't the xbox treat it like any other external hardisk?