Related
Hi guys and gals,
I've recently upgraded my XDA IIs to the latest iMate software. I've then re-installed tomTom 5 with the upgrade to version 5.1
Now my tomtom won't save any of my settings. So i can input my Home and favourties etc... shut down tomtom and then when i go back in, i have to accept the agreement again, and none of my settings are there.
Is anyone else having this problem? and more importantly - does anyone know what the fix is for this?
Thanks all
tcs44_uk - Are you installing from an SD Card? If you are check that the files are unlocked before you copy them onto the SD card or it will act as you have described.
I too had the same problem with a legit purchased copy from TomTom. Someone on another forum advised me to copy the files to the PC, unlock them, copy them back to the SD card the re-install - hey presto works a treat.
HTH
I have nearly the same problem. My settings stay, but favorite and base are gone after a few uses :
I record the base and a few favorites, I exit TT5 using the "quit" icon. When I restart it, the base & favorites are still there (so they are correctly recorded : the file is not locked, and the SD card not Read Only).
After a few runs (I have not been able to check how many, or what can cause that), they're all gone : no base and no favorite.
All I store in POI never disappear, so my work-around is to place all favorite and base in POI.
Tomtom support is ZERO. They have pre-formatted message they send not reading the whole problem, and it is impossible to reply, 'cause the case is closed after their crappy answer.
OhBuggerit2k2, how do I tell if the files are locked?
I have the same problem, TT5 will not remember any favourites when restarted.
I have the files on my computer, how do I check they are not locked?
Thanks Guys
Ginnser
Which files??
I also have this problem.....
does anyone know which file(s) it is that hold the info regarding:
Home location
Favourites
and all the other personal settings
would appreciate any help,
Thanks,
Alan
i had a similar issue & resolved it by changing the settings on the file with extension .cfg from read only. i had 2 copy the file 2 my desktop change the settings then saving back 2 xda2i.
i have a problem with tomtom where it throws me out...any1 know how 2 sort it?
Thanks guys - after copying all of the TomTom files back to PC, taking off the Read Only flag, and then copying the files back - all working fine now.
Cheers
hi guys
I cannot seem to find the .cfg file !
Which folder is it in?
also had a quick check, i dont seem to have any read only files !
Anyone help !
Thanls
Ginnser said:
hi guys
I cannot seem to find the .cfg file !
Which folder is it in?
also had a quick check, i dont seem to have any read only files !
Anyone help !
Thanls
Click to expand...
Click to collapse
Check out this thread for the answer:
http://forum.xda-developers.com/viewtopic.php?t=50200&highlight=
Been running my MDA Compact III for just under a week now. Everything was going fine, tom tom working etc. Yesterday I installed SPB Pocket Plus , now I can't connect via activsync and can't delete any files (from phone or memory card), get the error message....
Error Deleting File
Cannot delete 'filenamehere': Access is denied.
Make sure the disk is not full or write-protected and the file is not currently in use.
What have I done? I've tried a soft reset, that didn't work. I've took the memory card out and can delete files when I put it in a card reader. I'm hoping if changed a setting somewhere but I can't for the life of me work out what I've done.
Can anybody offer any suggestions?
I've never had problems after SPB Pocket Plus was installed. Currently I don't have it installed on my device since I use it solely just for navigation thus I cannot find a more concrete solution but to try uninstalling SPB Pocket Plus and see if your problem is solved.
Thanks for your reply, couldn't uninstall anything so had to go down the hard reset route. Wasn't too bad though, I got back up and running in about an hour will all my programmes installed and working again.
Still don't know what happened though.
zerimar said:
I've never had problems after SPB Pocket Plus was installed. Currently I don't have it installed on my device since I use it solely just for navigation thus I cannot find a more concrete solution but to try uninstalling SPB Pocket Plus and see if your problem is solved.
Click to expand...
Click to collapse
activesync problems
iam also facing the same problem. is there any alternative solution for this problem other than hard reset.
thanx
It may have nothing to do with Pocket Plus but rather the mysterious problem discussed here:
http://forum.xda-developers.com/showthread.php?t=285511
I had the same message and couldn't delete the erroneous files. My solution was also to hard reset.
My view
Oh i had the same problem,these files become stacked and are due to long paths,use the tool available at pathtoodeep.com ,it is a tool which deletes and also searches such undeleteable files and also assists in installation and sharing of long pathed files
Happy day!!!!!!
i just found there is a update for trinity from tomtom.com
all we need to do is download latest tomtom home, install it, then download the new voice file from tomtom home(the old voice files cannot be readed by tomtom 6.03 on trinity)
here is the link http://www.tomtom.com/support/index.php?FID=6736&Lid=1
Hope this can help everyone who get the same problem as me. cheers
after i install the tomtom6.3 on my trinity(wm6), the voice doesn't work. i do have the "voices" folder in my sd card, but the voice just doesn't work!
anybody knows why this happened? thanks.
sailer1983 said:
after i install the tomtom6.3 on my trinity(wm6), the voice doesn't work. i do have the "voices" folder in my sd card, but the voice just doesn't work!
anybody knows why this happened? thanks.
Click to expand...
Click to collapse
put all voices (all files inside \voice\ folder) into tomtomnavigator folder, where is tomtom navigator.exe...
usually this trik works
bye!
ervius said:
put all voices (all files inside \voice\ folder) into tomtomnavigator folder, where is tomtom navigator.exe...
usually this trik works
bye!
Click to expand...
Click to collapse
thanks man, but i have tried this way before, it doesn't work.
when i use Garmin iQue M5(windows mobile 2003), tomtom6.3 works perfect.
Is there a newer version than 6.03? My installation has a Program files/Navigator/Voices folder with a file called collected on the phone. On the SD card there is also a Voices folder with a collected file and two data08 files, one of which is quite large (671kb). Also , the sound is muted if TomTom is launched when there's a data connection.
sailer1983 said:
thanks man, but i have tried this way before, it doesn't work.
Click to expand...
Click to collapse
How about deleting the collected.ini file, I vaguely remember reading that you need to delete this file in both voices directories (making sure tomtom is not running). Then restart tomtom.
Also put the voices file into the program files/navigator/voices directory on phone - I've never had any luck with the voices directory on the storage card, even though my maps are on there??
Sorry if somebody has already suggested this...
Cheers.
Voices are located in sd card root folder "voices", if you have problems try to download voices from tomtom, even if you have a "trial" version i think you can download.
PGMMA said:
Is there a newer version than 6.03?
Click to expand...
Click to collapse
No- 6.03 is the latest version
sailer1983 said:
after i install the tomtom6.3 on my trinity(wm6), the voice doesn't work. i do have the "voices" folder in my sd card, but the voice just doesn't work!
anybody knows why this happened? thanks.
Click to expand...
Click to collapse
Have you tried rerunning the initial setup wizard- you may be able to reselect the voice you want from the list, then TTN will copy it to the Navigator folder as the data0*.chk file.
In the directory of the map you are using, replace files TRAFFIC.INC and MapSettings.cfg with original versions from these. Make a copy of them first (e.g. as xtraffic.inc and xmapsettings.cfg)
This works for me.
You will loose references to favorites, home, etc.
I hope this helps.
thanks everyone here, appreciate for your help.
the way from CRH66 doesn't work. but thanks all the same.
MJ, i have to say, i have the right files in vovics folder, and it is in the root directory, i also put them in program files/navigator/voices
not very clear about Benzin's method use which file to replace the one your mentioned?
i will try NeilM's trick later, then i will let u know what happed. cheers
sailer1983 said:
...not very clear about Benzin's method use which file to replace the one your mentioned?
Click to expand...
Click to collapse
Each and every map directory contains cline.dat, cname.dat, etc, and also the two files I mentioned. These two files are updated each time you use TomTom. Sometimes they become corrupted and TomTom looses the voice. You need to replace them with an earlier version that works. Copy them from another installation (a friend, emule, etc.) and substitute the ones you have.
Sometimes just deleting/renaming them and making a soft reset may work.
I insist, this works for me. If this does not solve your case, there is information in other fora about the deletion of a file in the windows directory. I tried this before without success.
Sound has a big bug in TomTom 6.030
... late
Thanks for the information in the first post. I hope this solves completely the issue.
The latest version is 6.03. What sound bug - never had a problem myself.
No sound bugs in tomtom 6.03
As far as i know, the latest release of TOMTOM 6.03 contains no bugs voices.
Well the main and best thing, would be better u unisntall your soft completely from your mobile with activesync, "off your mobile completely for 1mn" then reinstall the soft again again.
better to try something than not to try anything.
The Thread Starter has now updated his 1st post to say the problem is fixed!
AFAIK there is no problem with the older versions of TTN and the Trinity, nor with 6.03 and voices, but certainly installing TT Home often helps because it allows the configuration to be managed.
Benzin said:
Each and every map directory contains cline.dat, cname.dat, etc, and also the two files I mentioned. These two files are updated each time you use TomTom. Sometimes they become corrupted and TomTom looses the voice. You need to replace them with an earlier version that works. Copy them from another installation (a friend, emule, etc.) and substitute the ones you have.
Sometimes just deleting/renaming them and making a soft reset may work.
I insist, this works for me. If this does not solve your case, there is information in other fora about the deletion of a file in the windows directory. I tried this before without success.
Sound has a big bug in TomTom 6.030
Click to expand...
Click to collapse
Hi Benzin, the problem has been solved, but thanks any way for your kindly help.
NeilM said:
The Thread Starter has now updated his 1st post to say the problem is fixed!
AFAIK there is no problem with the older versions of TTN and the Trinity, nor with 6.03 and voices, but certainly installing TT Home often helps because it allows the configuration to be managed.
Click to expand...
Click to collapse
NeilM, i completely aggree with u. there is no bug in ttn6.03.
and i think i have found the point.
when i install ttn6.03 and it's voices into my Garmin iQue M5(WM2003se),it works perfect. Then i install the same program and voices into my Trinity(WM6), the problem comes, no sound!
After downloading the new voice files via Tomtom home, i found there are different voice files for WM2003se and WM6. The voices for WM6 are a lot bigger than the one for WM2003se!!!
It means the same voice files will work for WM2003se but not for WM6!
All those people who have this voice problem should update their voice files
Allways when I start the device, there comes this messages (free translation):
"Boot.exe
Boot file cannot open.
Either it does not have a signature and a trusted certificate or some of it's part cannot find. If problem continues reinstall file or restore it."
Then te broblem, my massmemory doesn't work at all... all my programs at devide small storage works like always, but everything in mass storage doesn't exist... i tried mp3-player to play some music - didin't work, i tried use programs which i had installed at mass storage, i also tied to plug device to PC for speculation and get more information, vista said that it was messed up and tried resolve it, without success.
I have on use Windows Mobile 6.1 and samsung SGH-i900 Omnia (works like normal PDA)
Any ideas? maybe someone, could send that boot.exe and tell where to put ir or do i have to send it back custody?
I haved the same problem,need help
have the same problem
do you solve your pb help me plz
I just had the same issue and found the fix for me, may work for you too
I searched "My Device" using a file explorer and found no instances of boot.exe on the device
Using a registry editor (I use Resco Registry Editor) I searched the registry for any instances of boot.exe
I found 2 instances that were both associated with one program (ClearTemp)
I uninstalled that program, soft reset and the issue was resolved.
I was then able to reinstall and everything worked as advertised.
Hope this is helpful,
J
just delete...
the cleartmp file in startup folder...this worked for me
rothod said:
the cleartmp file in startup folder...this worked for me
Click to expand...
Click to collapse
thanks to you
Thanks, worked for me too, after a SPB restore.
THANKS!!!!
@jagnflies: I just want let you know...: Thank you!!
thank you for this useful tip for myself,
just the unisnstall of cleartemp resolve my problem, I didn't found cleartp in sartup program
Thanks
thank you so much for your useful tip. it worked like charm for my htc hd2
thanks to 'jagnflies'
such a simple thing removed such a big problem. thanx dude
worked
thanks bro!!
thx alot man...thx for all your help...thx alot again
Hi, my bluetooth does not seem to work on the device. If I reset it i get the error message on start up saying 'BTTRAYCE' is not a vlaid Pocket PC application. Is my unit faulty. I have thought about doing a hard reset on the device but wanted to check with you guys if there is a simple fix, the unit needs replacing? or if the hard reset would work. If I was to do the hard reset what can I use to backup all my contacts with there facebook links etc and will the facebook links still exist?
Bladesharp said:
Hi, my bluetooth does not seem to work on the device. If I reset it i get the error message on start up saying 'BTTRAYCE' is not a vlaid Pocket PC application. Is my unit faulty. I have thought about doing a hard reset on the device but wanted to check with you guys if there is a simple fix, the unit needs replacing? or if the hard reset would work. If I was to do the hard reset what can I use to backup all my contacts with there facebook links etc and will the facebook links still exist?
Click to expand...
Click to collapse
You can use a program called Sprite Backup, although its not free. That will backup a lot of things, but to be honest, its probably best to start from scratch as it backs up all registry changes too, which could be the problem for you.
My bluetooth works fine, what part are you having trouble with?
Bluetooth Issues
I am having the same problem.
I have narrowed it down to tomtom installation (no bluetooth issues until tomtom is installed)
I have tried with TT7 910 9185 as well as TT7 445 and after the reboot the same error occurs.
I have also tried installing it on the memory card, and hard resetting it, however, the TomTom doesn't appear to talk to any Satellites.
I installed Tomtom 7.910.9185 and it says "Unable to start. Not enough memory" or similar. I installed it from cab on my 8GB Storage Card in the same way that worked perfectly on my Raphael.
The point of telling you that is my bluetooth is still working perfectly.
As for you Bladesharp, surely if you Activesync all the relevant links and details will remain with your contacts? I'd say a hard reset will determine if it's a hardware issue.
rb14 said:
I installed Tomtom 7.910.9185 and it says "Unable to start. Not enough memory" or similar. I installed it from cab on my 8GB Storage Card in the same way that worked perfectly on my Raphael.
The point of telling you that is my bluetooth is still working perfectly.
As for you Bladesharp, surely if you Activesync all the relevant links and details will remain with your contacts? I'd say a hard reset will determine if it's a hardware issue.
Click to expand...
Click to collapse
I'm on 7.915 for TomTom and don't have the issue.
Links to Facebook won't transfer with Active Sync, they are stored somewhere seperately on the phone and are not part of the Contacts program in pOutlook.exe, they are part of Manila which is not transferable. Not sure where it is stored, have been looking now for about 2 months
I came across something similar to this last week after installing TomTom from a CAB, and found this post on a related issue...
http://www.noeman.org/gsm/trash-section/65951-tomtom-7-bluetooth-problems-sorted.html
I deleted the two bluetooth files (BtSdKCE30.dll & BtCoreIF.dll) from the TomTom CAB as described, did a hard reset and reinstalled, and haven't had the problem since. Could be the same issue?
Could someone who has not installed TomTom please post the dates of their BtCoreIf.dll & BtSdkCE30.dll? Mine are both 04/24/08 20:10.
Does anyone know if it is possible to revert to the ROM version of these files WITHOUT doing a hard reset?
If some kind person was able to provide me with the ROM version, can I just overwrite the ones in RAM?
R
These came from my device's \Windows directory, and are dated 14th May. I think they are unaffected by this problem, certainly I don't get the boot delay or BTTray boot crash that seem to be the possible symptoms of this. (Use caution, of course; backup what you can before tinkering in case of disaster.)
Sounds the same as my thread
http://forum.xda-developers.com/showthread.php?t=522373
someone already tried the above files? will it correct the problem?
Thanks for the files.
I am happy to confirm that installing the two DLLs gets BTTrayCE.exe working again.
I just renamed the 04/24/08 versions to .was and use Total Commander to copy the files from my storage card to \Windows and rebooted the phone... ActiveSync wouldn't let me copy them directly from my PC as it said there was already a 05/14/09 version there and it was read-only!
As it rebooted, it complained that BtCoreIf.dll was from an unknown supplier but I just OK'd that and everything is fine. Bluetooth & TTN working.
R.
PS Didn't need to copy BTTrayCE.exe as this had not been overwritted.
Ah, thanks for letting me know. I wasn't sure if the exe was also needed, I only included it since one of the symptoms I was getting was that this wasn't a valid executable; but I guess that was just caused by the corruption of the dll's.
I don't think the DLLs are corrupted, just an earlier version.
Just like the bad old days of Windows 3.1 where installing one package would break others due the installing of different versions common DLLs. Gosh, I feel old!
R.
dicko99 said:
I don't think the DLLs are corrupted, just an earlier version.
Click to expand...
Click to collapse
Ah yes; that makes more sense! I still had a boot delay even with the files from the most recent TomTom version I could find.
Hi there,
i had the same Problem with TT. In my case I also copyed the BTTrayCE.exe. Now I dont get any error anymore but the Bluetooth can still not be started. Can somebody please upload the Original BTTrayCE.exe. Thank you
I did a reset of my Swisscom German Device. Copyed the 3 BT Files and installed the TT7 v7.910.9185 again. After restart of my Device the same BT Error. I replayced the 3 Files with my Original ones and restarted again. New Error comes up "Bluetooth Stack can not be started"
zizzo
Thanks guys a lot. Rewriting those two files solve the problem. Bluetooth works now.
ianjd said:
These came from my device's \Windows directory, and are dated 14th May. I think they are unaffected by this problem, certainly I don't get the boot delay or BTTray boot crash that seem to be the possible symptoms of this. (Use caution, of course; backup what you can before tinkering in case of disaster.)
Click to expand...
Click to collapse
Thanking you very much kind sir. I unzipped these files directly to my storage card in USB mode and just double clicked the exe file and it fixed my bluetooth up for me. (good job as I am a technical biff when things get registry level)
EDIT sorry I thought it did but it didn't just fix it by double clicking the exe. I've hard reset now as I don't really know what I am doing
As said in the thread here:
http://forum.xda-developers.com/showthread.php?t=522373&page=4
There is no need to replace the two files.
Just delete them and soft reset. They will be replaced with the two right ones.
Bluetooth problem with TomTom resolved!
matrixis2day said:
I replayced the 3 Files with my Original ones and restarted again. New Error comes up "Bluetooth Stack can not be started"
Click to expand...
Click to collapse
I had the same and here's what I just discovered and what worked:
I removed the files and expected them to be replaced upon restart. When I checked I noticed a file in the \Windows directory named BtSdKCE50.dll - I had not noticed this before. I (re)moved this, rebooted again and now Bluetooth and FM Radio (!) are working, yay!
hth,
TA2
This fixed my problem. Couldnt delete the old files but copied the replacements over the top and that sorted it. My version of Tom Tom wont work stil but it is 7.5 I think.
I've had exactly the same problem I've tried overwriting the dll's with the files provided in this thread,
Now whilst I don't get the error message, when I try and enable bluetooth, I get "cannot start bluetooth stack" error
Any ideas peeps?