Allways when I start the device, there comes this messages (free translation):
"Boot.exe
Boot file cannot open.
Either it does not have a signature and a trusted certificate or some of it's part cannot find. If problem continues reinstall file or restore it."
Then te broblem, my massmemory doesn't work at all... all my programs at devide small storage works like always, but everything in mass storage doesn't exist... i tried mp3-player to play some music - didin't work, i tried use programs which i had installed at mass storage, i also tied to plug device to PC for speculation and get more information, vista said that it was messed up and tried resolve it, without success.
I have on use Windows Mobile 6.1 and samsung SGH-i900 Omnia (works like normal PDA)
Any ideas? maybe someone, could send that boot.exe and tell where to put ir or do i have to send it back custody?
I haved the same problem,need help
have the same problem
do you solve your pb help me plz
I just had the same issue and found the fix for me, may work for you too
I searched "My Device" using a file explorer and found no instances of boot.exe on the device
Using a registry editor (I use Resco Registry Editor) I searched the registry for any instances of boot.exe
I found 2 instances that were both associated with one program (ClearTemp)
I uninstalled that program, soft reset and the issue was resolved.
I was then able to reinstall and everything worked as advertised.
Hope this is helpful,
J
just delete...
the cleartmp file in startup folder...this worked for me
rothod said:
the cleartmp file in startup folder...this worked for me
Click to expand...
Click to collapse
thanks to you
Thanks, worked for me too, after a SPB restore.
THANKS!!!!
@jagnflies: I just want let you know...: Thank you!!
thank you for this useful tip for myself,
just the unisnstall of cleartemp resolve my problem, I didn't found cleartp in sartup program
Thanks
thank you so much for your useful tip. it worked like charm for my htc hd2
thanks to 'jagnflies'
such a simple thing removed such a big problem. thanx dude
worked
thanks bro!!
thx alot man...thx for all your help...thx alot again
Related
Been running my MDA Compact III for just under a week now. Everything was going fine, tom tom working etc. Yesterday I installed SPB Pocket Plus , now I can't connect via activsync and can't delete any files (from phone or memory card), get the error message....
Error Deleting File
Cannot delete 'filenamehere': Access is denied.
Make sure the disk is not full or write-protected and the file is not currently in use.
What have I done? I've tried a soft reset, that didn't work. I've took the memory card out and can delete files when I put it in a card reader. I'm hoping if changed a setting somewhere but I can't for the life of me work out what I've done.
Can anybody offer any suggestions?
I've never had problems after SPB Pocket Plus was installed. Currently I don't have it installed on my device since I use it solely just for navigation thus I cannot find a more concrete solution but to try uninstalling SPB Pocket Plus and see if your problem is solved.
Thanks for your reply, couldn't uninstall anything so had to go down the hard reset route. Wasn't too bad though, I got back up and running in about an hour will all my programmes installed and working again.
Still don't know what happened though.
zerimar said:
I've never had problems after SPB Pocket Plus was installed. Currently I don't have it installed on my device since I use it solely just for navigation thus I cannot find a more concrete solution but to try uninstalling SPB Pocket Plus and see if your problem is solved.
Click to expand...
Click to collapse
activesync problems
iam also facing the same problem. is there any alternative solution for this problem other than hard reset.
thanx
It may have nothing to do with Pocket Plus but rather the mysterious problem discussed here:
http://forum.xda-developers.com/showthread.php?t=285511
I had the same message and couldn't delete the erroneous files. My solution was also to hard reset.
My view
Oh i had the same problem,these files become stacked and are due to long paths,use the tool available at pathtoodeep.com ,it is a tool which deletes and also searches such undeleteable files and also assists in installation and sharing of long pathed files
Call me dumb, but how do I install a CAB? I looked at wiki and several forums
A little help
tl_bull said:
Call me dumb, but how do I install a CAB? I looked at wiki and several forums
Click to expand...
Click to collapse
You really need to look harder or just try and experiment...
Now that I've fired off the mandatory chastisement, let me try to be somewhat helpful....
When your phone is connected to your Desktop, Right click on your active sync icon in your Desktop Windows taskbar. Select "Explore". You'll get a windows explorer. You can just drag and drop the CAB file from your Windows Desktop to that folder, and viola! a Cab file is now on your PPC.
From there, explore to that same directory from your PPC using File Explorer (if you haven't figured out how to get CABs installed on your PPC yet, you probably aren't using Resco Explorer yet, either ). From the the PPC explorer, just click the CAB file and it'll install.
I hope that helps.
-Humbert
Ah see, mine is having issues as I am on Vista Ultimate... and well it isnt Ultimate with syncing, Guess if I use the XP comp I may have seen this with no issue.
THANK YOU VERY MUCH THOUGH! That was a big help!
obcviously your new to ppc's, Welcome to xda-devs and a world of a love and hate relationship!
just keep in mind .cab's install within the ppc and .exe's usually install with activesync while your device is connected to your pc. If you have a .exe give you a Win32 error, that means it runs on the ppc as well.
You could also send the CAB file using bluetooth OR by e-mail. Then simply receive the mail on your ppc, detach the attachment (the CAB file) and proceed from there.
By the way: after you install the CAB, you can delete it from you ppc, to save space.
Oh, and should this thread not be in the general forum in stead of WM6?
tl_bull said:
Ah see, mine is having issues as I am on Vista Ultimate... and well it isnt Ultimate with syncing, Guess if I use the XP comp I may have seen this with no issue.
QUOTE]
Click to expand...
Click to collapse
WINRAR.... is installed on my machine and cab's were viewed as RAR's (I figured everyone rar'd or zipped em, so I was unpacking them and trying to install that way of the setup.xml But I put one unpacked on the PPC and it looks like an executable so I confirmed and then installed, I am no tracking... MicroSD card... Nokia carries mainly Mini's I have 3 minisd's with only a little need for any of the three...
CANT DELETE (tried top thread normal BB Code spot in advance, admin or mod if you see this please delete I figured it out with help from the fine board members you have.)
tl_bull said:
Ah see, mine is having issues as I am on Vista Ultimate... and well it isnt Ultimate with syncing, Guess if I use the XP comp I may have seen this with no issue.
THANK YOU VERY MUCH THOUGH! That was a big help!
Click to expand...
Click to collapse
There is a tutorial around here somewhere that someone created to explain how to get AS working or at least to change the drivers for the tool that Vista uses to the AS drivers so that you can sync in Vista.
I haven't read it myself as I am still using XP Pro and haven't needed to, but have heard several people say that it solved their Vista nightmares as far as their Hermes devices go.
The technique is described in my guide HERE give it a go, however if it doesnt work this technique is the same as described elsewhere in the forum and as such you should try to get access to an XP machine until vista is conquered.
Ive had many PMs saying it works fine so it is definatly worth a shot
In Vista, the process of copying a cab or other file from the PC to the WM device is even easier. Vista has default USB drivers that show the WM device in Vista File Explorer and you can drag and drop items from one system to the other when they are connected over USB.
If you connect a WM device and then run Windows Update, the Vista Mobile Device Center update will automatically download and you will have all the features of ActiveSync automatically.
The procedures described by Mr Vanx are of course if you want to use your Vista PC to upgrade the ROMs on your WM device and other such advanced technical things that you should avoid until you've gained some experience!
Hope this helps.
tl_bull said:
Call me dumb, but how do I install a CAB? I looked at wiki and several forums
Click to expand...
Click to collapse
If you having problems with Vista you could install the cab file onto your memory card if you have a card reader, and then run it from your device by tapping on it. I can vouch for the Vista fix that mrvanx pointed out as I have used it myself, it is all clearly described with full screenshots and I think you should give it go, just follow each step and do exactly as it says!
Is there a way to get MSN Messenger onto my phone for free or is it a purchase only? I found an old version of Messenger for pocket pc 2002 ( it was via a thread at this board ) which after installation on my phone showed the MSN icon but didn't do anything. There was some update file which I needed as well to make it work but microsoft had deleted it. I'm just looking for messenger the same as it is on my pc, with standard smileys, etc, not one of those messenger clones. Thanks.
How's this? http://www.badongo.com/file/2528811
JamminJaguar said:
How's this? http://www.badongo.com/file/2528811
Click to expand...
Click to collapse
Thanks man. Unfortunately, after it goes through the process of trying to install the .CAB file on my phone, it says installation unsuccessful. Not sure why tbh. On their error screen, they say it could be insufficient memory, device may not support it, or that my carrier (T-Mobile) may not allow it. As it installs, it doesn't give me an option to install to either the device or my storage card. Any suggestions?
Try this thread: http://forum.xda-developers.com/showthread.php?t=334621
JamminJaguar said:
Try this thread: http://forum.xda-developers.com/showthread.php?t=334621
Click to expand...
Click to collapse
Excellent, I got it working! I tried out duttythroy's 1.80mb cab file and it worked. Well actually, it said successful install but there was nothing to find of the program anywhere on my device except in remove programs. So I decided to look in my device/windows folder, and all the WLM files were in there. I clicked on the WLMMessenger.exe and it went through the set up process, merging contacts and signing me in. Thank you JamminJaguar and duttythroy.
No problem, now buy my Nike.
JamminJaguar said:
No problem, now buy my Nike.
Click to expand...
Click to collapse
Heh
Actually, I ended up installing this, uninstalling it and reinstalling it, because I did something wrong with the setup. On the first install, messenger, windows live services and and search bar all showed up on my phones desktop which was great. This time, it's not showing at all for some reason. Maybe because on the second install I decided to untick the search bar and services? So I've copied the WLMMessenger.exe from the windows folder and pasted it into my device/program files folder and that works.
ANd agoin
im not and idiot or a noob, im tyring to post legitimate feedback on an android rom i am currently using but i need 10 posts so here is one more, thanks for this stupid rule! 8
I have been using Droid ROMS, MODS and kernels since the G1.
Hello all, best wishes for all of you.
I am new on this forum and read many stuff here allready. However i didn't find a real solution yet for my problem to get cab-files installed, f.e.:
I'd like to install Gyrator 2 on my HTC Touch HD (UK) (And other software)
When i try this i get this error:
"The file "gyrator" cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring the file".
The same message occures when i try to do this with other cab-files. GSen was going fine and even CabInstaller did. Net Compact Framework 3.5. installed and ROM version: 1.14.401.3
I copied the cab-files from PC to PPC by dragging it into the Storage Card.
I would really appreciate your help, because im goin' nuts!!!
Tia ....
Hello.
try this:
- make a soft reset and try again to install from the SD card
- make a soft reset, copy the .cab file with activesync to the phone memory (not on the SD card) and try again to install
when this also won´t work I´m afraid you will have to hard reset your phone..
i had same problem
why dont you just use Gsen, same thing, works great! its definately here
BlackMonkey said:
Hello.
try this:
- make a soft reset and try again to install from the SD card
- make a soft reset, copy the .cab file with activesync to the phone memory (not on the SD card) and try again to install
when this also won´t work I´m afraid you will have to hard reset your phone..
Click to expand...
Click to collapse
Didn't work either ... A hard reset? Uhm .... Don't like that, i hope and will wait first for a solution ...
patterns said:
i had same problem
why dont you just use Gsen, same thing, works great! its definately here
Click to expand...
Click to collapse
As said it is not only Gyrator but it occures with more cab-files. The rotate is not my only goal, therefor i surely could use Gsen, but Gyrator 2 cn do much more. The same with other 3rd Party's ...
Use Advanced Configuration to make sure that your security warning is disabled.
What .cabs are you trying to install?
Problem SOLVED!!
AllTheWay said:
Use Advanced Configuration to make sure that your security warning is disabled.
What .cabs are you trying to install?
Click to expand...
Click to collapse
Problem solved! The way i used CabInstaller was wrong. Instead of open the CaBinstaller first and then adding the cab-file and destination path, i double clicked on the cab-files first and then it won't work, because i gave CabInstaller permission to take over the control of installing cab-files
Thank you anyway for thinking with me ..
Great to hear you solved your problem!
<off-topic>Could you please change your subject in the initial post? subject is supposed to describe what the thread is about like "unable to install CAB files" or something like that...thanks<off-topic>
Hi, my bluetooth does not seem to work on the device. If I reset it i get the error message on start up saying 'BTTRAYCE' is not a vlaid Pocket PC application. Is my unit faulty. I have thought about doing a hard reset on the device but wanted to check with you guys if there is a simple fix, the unit needs replacing? or if the hard reset would work. If I was to do the hard reset what can I use to backup all my contacts with there facebook links etc and will the facebook links still exist?
Bladesharp said:
Hi, my bluetooth does not seem to work on the device. If I reset it i get the error message on start up saying 'BTTRAYCE' is not a vlaid Pocket PC application. Is my unit faulty. I have thought about doing a hard reset on the device but wanted to check with you guys if there is a simple fix, the unit needs replacing? or if the hard reset would work. If I was to do the hard reset what can I use to backup all my contacts with there facebook links etc and will the facebook links still exist?
Click to expand...
Click to collapse
You can use a program called Sprite Backup, although its not free. That will backup a lot of things, but to be honest, its probably best to start from scratch as it backs up all registry changes too, which could be the problem for you.
My bluetooth works fine, what part are you having trouble with?
Bluetooth Issues
I am having the same problem.
I have narrowed it down to tomtom installation (no bluetooth issues until tomtom is installed)
I have tried with TT7 910 9185 as well as TT7 445 and after the reboot the same error occurs.
I have also tried installing it on the memory card, and hard resetting it, however, the TomTom doesn't appear to talk to any Satellites.
I installed Tomtom 7.910.9185 and it says "Unable to start. Not enough memory" or similar. I installed it from cab on my 8GB Storage Card in the same way that worked perfectly on my Raphael.
The point of telling you that is my bluetooth is still working perfectly.
As for you Bladesharp, surely if you Activesync all the relevant links and details will remain with your contacts? I'd say a hard reset will determine if it's a hardware issue.
rb14 said:
I installed Tomtom 7.910.9185 and it says "Unable to start. Not enough memory" or similar. I installed it from cab on my 8GB Storage Card in the same way that worked perfectly on my Raphael.
The point of telling you that is my bluetooth is still working perfectly.
As for you Bladesharp, surely if you Activesync all the relevant links and details will remain with your contacts? I'd say a hard reset will determine if it's a hardware issue.
Click to expand...
Click to collapse
I'm on 7.915 for TomTom and don't have the issue.
Links to Facebook won't transfer with Active Sync, they are stored somewhere seperately on the phone and are not part of the Contacts program in pOutlook.exe, they are part of Manila which is not transferable. Not sure where it is stored, have been looking now for about 2 months
I came across something similar to this last week after installing TomTom from a CAB, and found this post on a related issue...
http://www.noeman.org/gsm/trash-section/65951-tomtom-7-bluetooth-problems-sorted.html
I deleted the two bluetooth files (BtSdKCE30.dll & BtCoreIF.dll) from the TomTom CAB as described, did a hard reset and reinstalled, and haven't had the problem since. Could be the same issue?
Could someone who has not installed TomTom please post the dates of their BtCoreIf.dll & BtSdkCE30.dll? Mine are both 04/24/08 20:10.
Does anyone know if it is possible to revert to the ROM version of these files WITHOUT doing a hard reset?
If some kind person was able to provide me with the ROM version, can I just overwrite the ones in RAM?
R
These came from my device's \Windows directory, and are dated 14th May. I think they are unaffected by this problem, certainly I don't get the boot delay or BTTray boot crash that seem to be the possible symptoms of this. (Use caution, of course; backup what you can before tinkering in case of disaster.)
Sounds the same as my thread
http://forum.xda-developers.com/showthread.php?t=522373
someone already tried the above files? will it correct the problem?
Thanks for the files.
I am happy to confirm that installing the two DLLs gets BTTrayCE.exe working again.
I just renamed the 04/24/08 versions to .was and use Total Commander to copy the files from my storage card to \Windows and rebooted the phone... ActiveSync wouldn't let me copy them directly from my PC as it said there was already a 05/14/09 version there and it was read-only!
As it rebooted, it complained that BtCoreIf.dll was from an unknown supplier but I just OK'd that and everything is fine. Bluetooth & TTN working.
R.
PS Didn't need to copy BTTrayCE.exe as this had not been overwritted.
Ah, thanks for letting me know. I wasn't sure if the exe was also needed, I only included it since one of the symptoms I was getting was that this wasn't a valid executable; but I guess that was just caused by the corruption of the dll's.
I don't think the DLLs are corrupted, just an earlier version.
Just like the bad old days of Windows 3.1 where installing one package would break others due the installing of different versions common DLLs. Gosh, I feel old!
R.
dicko99 said:
I don't think the DLLs are corrupted, just an earlier version.
Click to expand...
Click to collapse
Ah yes; that makes more sense! I still had a boot delay even with the files from the most recent TomTom version I could find.
Hi there,
i had the same Problem with TT. In my case I also copyed the BTTrayCE.exe. Now I dont get any error anymore but the Bluetooth can still not be started. Can somebody please upload the Original BTTrayCE.exe. Thank you
I did a reset of my Swisscom German Device. Copyed the 3 BT Files and installed the TT7 v7.910.9185 again. After restart of my Device the same BT Error. I replayced the 3 Files with my Original ones and restarted again. New Error comes up "Bluetooth Stack can not be started"
zizzo
Thanks guys a lot. Rewriting those two files solve the problem. Bluetooth works now.
ianjd said:
These came from my device's \Windows directory, and are dated 14th May. I think they are unaffected by this problem, certainly I don't get the boot delay or BTTray boot crash that seem to be the possible symptoms of this. (Use caution, of course; backup what you can before tinkering in case of disaster.)
Click to expand...
Click to collapse
Thanking you very much kind sir. I unzipped these files directly to my storage card in USB mode and just double clicked the exe file and it fixed my bluetooth up for me. (good job as I am a technical biff when things get registry level)
EDIT sorry I thought it did but it didn't just fix it by double clicking the exe. I've hard reset now as I don't really know what I am doing
As said in the thread here:
http://forum.xda-developers.com/showthread.php?t=522373&page=4
There is no need to replace the two files.
Just delete them and soft reset. They will be replaced with the two right ones.
Bluetooth problem with TomTom resolved!
matrixis2day said:
I replayced the 3 Files with my Original ones and restarted again. New Error comes up "Bluetooth Stack can not be started"
Click to expand...
Click to collapse
I had the same and here's what I just discovered and what worked:
I removed the files and expected them to be replaced upon restart. When I checked I noticed a file in the \Windows directory named BtSdKCE50.dll - I had not noticed this before. I (re)moved this, rebooted again and now Bluetooth and FM Radio (!) are working, yay!
hth,
TA2
This fixed my problem. Couldnt delete the old files but copied the replacements over the top and that sorted it. My version of Tom Tom wont work stil but it is 7.5 I think.
I've had exactly the same problem I've tried overwriting the dll's with the files provided in this thread,
Now whilst I don't get the error message, when I try and enable bluetooth, I get "cannot start bluetooth stack" error
Any ideas peeps?