Related
How can leave my Dash connected to the PC/USB but turn off Activesync (4.5) ?
The reason to do this is to allow my Dash to charge off the USB while I am using its WiFi connection (whenever I connect the Dash up to the USB, Activesync jumps in and that shuts down the WiFi connection).
Thanks.
Just check that you haven't configured an AS profile for your device or delete the configured one.
Try "WM5torage"
Makes your device a usb mass storage device and stop AS doing it's stuff. It does make your card unreadable by other software while running so you may want to bear that in mind when doing whatever your doing with your wireless.
Can't you just go into the connection settings in ActiveSync and disable the USB connection?
callmemoe said:
Can't you just go into the connection settings in ActiveSync and disable the USB connection?
Click to expand...
Click to collapse
Yes, that does work. Thanks... its what I want to have happen...
OK I haven't tried this myself ( I do Wm5torage) but here's another link:
http://www.freewarepocketpc.net/ppc-download-activesync-toggle-v1-0-4-0.html
There's loads of other useful stuff at that site as well.
Hi,
Since AS 4.2 came out I have problems to use USB Internet passthrough in Activesync, als AS 4.5 did not solve this problem. I googled around a lot and also searched in xda forums but everyone is giving other instructions, some say this, some say it the other way. It also does not depend on the rom, I had the same problem on the wizard and now also with my TyTN on wm5 and wm6 roms.
So my question is: How to enable USB internet passthrough on ActiveSync 4.5? At the moment my desktop activesync is set to "automatic" in the connection settings, and on my device under Settings->Connections->Connections->Advanced->Select Networks I have "Orange Internet" as the connection which connects to the internet (which has in the proxy settings "this network connects to the internet" enabled). and the work connection is "My ISP" which has no settings at all. I tried to add a new network connection but didn't even know which Modem I have to choose and so I gave this up.
I also tried to set my desktop activesync to either use "Work" or "Internet" instead of automatic but when I try to use Opera, Internet Explorer or any other program like downloading the weather data all programs say that the host or page cannot be found or report a network error.
Can anyone help with this, I'm really very desperate... Cause I also tried to find the correct settings for hours now, but without luck...
Thanks for any help with this subject.
marcelser said:
Hi,
Since AS 4.2 came out I have problems to use USB Internet passthrough in Activesync, als AS 4.5 did not solve this problem. I googled around a lot and also searched in xda forums but everyone is giving other instructions, some say this, some say it the other way. It also does not depend on the rom, I had the same problem on the wizard and now also with my TyTN on wm5 and wm6 roms.
So my question is: How to enable USB internet passthrough on ActiveSync 4.5? At the moment my desktop activesync is set to "automatic" in the connection settings, and on my device under Settings->Connections->Connections->Advanced->Select Networks I have "Orange Internet" as the connection which connects to the internet (which has in the proxy settings "this network connects to the internet" enabled). and the work connection is "My ISP" which has no settings at all. I tried to add a new network connection but didn't even know which Modem I have to choose and so I gave this up.
I also tried to set my desktop activesync to either use "Work" or "Internet" instead of automatic but when I try to use Opera, Internet Explorer or any other program like downloading the weather data all programs say that the host or page cannot be found or report a network error.
Can anyone help with this, I'm really very desperate... Cause I also tried to find the correct settings for hours now, but without luck...
Thanks for any help with this subject.
Click to expand...
Click to collapse
do you use a proxy server for this pass through connection? what activesync partnership do you have setup "Guest" or a Normal one...
First to be able to use passthrough you must be connected to your PC via USB and thus connected to active sync. Active Sync should be fully set-up.
First question;
Can you synchronize your data through Active Sync 4.5.
If yes. Try to tick all the items in the desktop active sync> connections settings. On the space "this computer is connected to" select automatic
second: Can your PC connect to the internet?
If yes open the PC Internet Explorer and try to browse, then, while connected at USB, open Pocket Internet Explorer in your mobile and try to browse. You should be connected to the internet then. Good Luck!!
If still you wouldnt connect there must be wrong on your Active Sync partnership set-up
Two more tips:
1. Start/Settings/Connections/USB to PC - untic
2. http://pdaphonehome.com/forums/552203-post22.html
no proxy
walshieau said:
do you use a proxy server for this pass through connection? what activesync partnership do you have setup "Guest" or a Normal one...
Click to expand...
Click to collapse
I don't use any proxy server for connecting to the internet, my PC is directly connected to a NAT Router, as well as my linux box and my girlfriends computer and all work perfect.
As for the activesync partnership, where do I see the type of my partnership or in other words, what is a "guest" partnership? The only thing I see is that my device is named "WM_marc1" and that activesync items sync perfectly but the internet passthrough won't work.
I hope you can give me further advice with this information. Thanks for you help
docles2002 said:
First to be able to use passthrough you must be connected to your PC via USB and thus connected to active sync. Active Sync should be fully set-up.
First question;
Can you synchronize your data through Active Sync 4.5.
If yes. Try to tick all the items in the desktop active sync> connections settings. On the space "this computer is connected to" select automatic
second: Can your PC connect to the internet?
If yes open the PC Internet Explorer and try to browse, then, while connected at USB, open Pocket Internet Explorer in your mobile and try to browse. You should be connected to the internet then. Good Luck!!
If still you wouldnt connect there must be wrong on your Active Sync partnership set-up
Click to expand...
Click to collapse
My data synchronizes perfectly through AS 4.5 and I have already checked all items in connection settings. Of course my computer is connected to the internet (see reply to walshieau) and honestly IE and pocket IE have nothing to do with internet passthrough, it's all about TCP/IP subnetting, bridging, tunnelling or whatever method AS 4.5 uses for internet passthrough.
Sorry if i am not explicit...but i hope this helps. For my wizard i remember i had to install a reg on the PC. It did some changes to the Active Sync registry.
The bad is that i don't have that reg
marcelser said:
Hi,
Since AS 4.2 came out I have problems to use USB Internet passthrough in Activesync, als AS 4.5 did not solve this problem. I googled around a lot and also searched in xda forums but everyone is giving other instructions, some say this, some say it the other way. It also does not depend on the rom, I had the same problem on the wizard and now also with my TyTN on wm5 and wm6 roms.
So my question is: How to enable USB internet passthrough on ActiveSync 4.5? At the moment my desktop activesync is set to "automatic" in the connection settings, and on my device under Settings->Connections->Connections->Advanced->Select Networks I have "Orange Internet" as the connection which connects to the internet (which has in the proxy settings "this network connects to the internet" enabled). and the work connection is "My ISP" which has no settings at all. I tried to add a new network connection but didn't even know which Modem I have to choose and so I gave this up.
I also tried to set my desktop activesync to either use "Work" or "Internet" instead of automatic but when I try to use Opera, Internet Explorer or any other program like downloading the weather data all programs say that the host or page cannot be found or report a network error.
Can anyone help with this, I'm really very desperate... Cause I also tried to find the correct settings for hours now, but without luck...
Thanks for any help with this subject.
Click to expand...
Click to collapse
hi, I am using wm6(LVSW series, black Series and now Official Dopod release) on my hermes, everytime I can successfully connect to the internet via activesync using whatever program like pie, opera, spb insight, weather update, WML etc.
what I have done is simply unchecked the 'enable advanced network functionality' under start -> settings -> connections ->USB to PC and then plug the usb cable to my pc.
I use activesync 4.5.
hope this help
ctrlaltdel said:
hi, I am using wm6(LVSW series, black Series and now Official Dopod release) on my hermes, everytime I can successfully connect to the internet via activesync using whatever program like pie, opera, spb insight, weather update, WML etc.
what I have done is simply unchecked the 'enable advanced network functionality' under start -> settings -> connections ->USB to PC and then plug the usb cable to my pc.
I use activesync 4.5.
hope this help
Click to expand...
Click to collapse
YES WORKS UNDER VISTA TOO
simply check the 'allow data connections on device when conneted to the pc' under connection settings and then plug the usb cable to pc.
Heres the Fix
I had the same problem and this reg key fixed it for me 100%
Download this file AND RENAME IT TO lspvalue.reg
the double click on the reg file on your PC
Jules
ZaJules said:
I had the same problem and this reg key fixed it for me 100%
Download this file AND RENAME IT TO lspvalue.reg
the double click on the reg file on your PC
Jules
Click to expand...
Click to collapse
That's the one i was talking about, thanks i was going to need it too
Ok followed the procedures. I think anyone of them works. Mine worked by changing on PC activesync to "this computer is connected to: The Internet". Nothing else worked. I had the reg hack from the time of my beloved Wizard!
go to:
start -> settings -> connections -> advanced -> select network
make sure that
"programs that automaticaly connect to the internetshould connect using"
"my work network" and not "my isp"
then go to
start -> settings -> connections -> usb to pc
and make sure to uncheck "enable advanced network functionality"
that should do it
regards
H.S.
hsalah72 said:
then go to
start -> settings -> connections -> usb to pc
and make sure to uncheck "enable advanced network functionality"
that should do it
regards
H.S.
Click to expand...
Click to collapse
on my hp 6828, it doesnt seem to have the usb to pc option/icon.
tried the first part selecting connect to work.
I'm stil haveing a problem. any ideas?
maymaymay said:
Two more tips:
1. Start/Settings/Connections/USB to PC - untic
Click to expand...
Click to collapse
This one works for my TP
Goshh... I love this board !!
Thank you very much, maymaymay
Still not working
Why can't someone come up with an ACTUAL solution to this?
When I connect my Tilt to the PC it automatically passes the internet connection through the PC. I did the registry fix and tried all four settings (0, 1, 10, 11) and still my data connection on the phone is overridden by the active sync desktop pass-through. I turned off the advanced networking option and still it goes through the PC. I even went through all the settings in active sync for "This computer is connected to" even though that doesn't even look like it would affect which connection my phone uses. This seems more like a setting within active sync on the phone more than anything.
I use my phone at work for chatting on yahoo IM (with Palringo) since my company network is filtered. I use a program called MyMobiler to transfer the phone display and controls to the PC so I can use my desktop keyboard for the chat program instead of my phone's keypad. Since the network is filtered the internet connection on my phone is filtered too since it's passed through the desktop when I active sync it to use MyMobiler. Sometimes Palringo will hold the connection even after I've connected to the desktop and sometimes it won't.
Bottom line here is can someone come up with an real working solution to this problem that a LOT of people are having?
HOW TO DISABLE DESKTOP PASSTHROUGH WHEN CONNECTING WITH ACTIVESYNC. Search that on google and here and all you will find are people saying "Yeah I have that problem too" or people telling how to connect WITH desktop passthrough.
I have a similar issue. I have my phone connected to my work PC to charge / sync, but all Internet connections attempted by the phone are being routed through my work network until I unplug the USB.
Naturally, that's very bad since all Internet traffic is logged by my work and many sources are blocked. I have an unlimited data plan on my phone. Why can't I stay connected to it when I'm hooked to ActiveSync?
I read someplace that Windows Mobile has an order of preference where connections are concerned. Probably hard line, then wi-fi, 3G and then EDGE. Surely there must be some way to modify this order of preference.
The thread is missunderstood...
The problem here is give to the PPC internet via usb... providede by a PC...
The solution that REG (that works for me EVER!!!).
And now other one provide internet to my PC via usb on phone account
With apologies, I'm not sure I understood what you said there.
But, some of us are actually trying to stop receiving internet by the USB.
I would like the phone to initiate a wireless 3G connection even when connected to the PC. But, thus far, all settings I've tried still cause my phone to attempt to access my business network here at my company.
Big no-no.
have you finally solved the problem?
If so just like to ask if you have change your homepage in ppc? which is
file://windows/default_0409.htm?
and have not run your network wizard? then maybe I have the solution here
Reg key
HKEY_LOCAL_MACHINE\Software\Microsoft\Internet Explorer/AboutURLs/
usually it is ( default value )
A.Blank value is res://webview.dll/blank.htm
B.Home_0409 value isfile://windows/default_0409.htm
C.version_0409value isfile://windows/default_0409.htm
if there is a new reg in that one try to delete that file again using a registry explorer ( depends on what you use to view the file)
turn it off for about 30 secs then soft reset... I hope this helps out
I'm not sure that addresses the issue, or mine at least. My phone disables HSDPA the moment I plug the USB cable into the phone and Active Sync takes over. It's before I even open a browser.
Not only does the phone start looking for Internet over the USB Active Sync connection, it looks for non browser related things like weather updates and sending mail to the gmail server.
Somewhere, it's coded to have an order of preference in what kind of connection it accesses. By default, it seems to look for any available land line connection, possibly wi-fi next, then 3G and then EDGE. I'd like to take the land line connection completely out of the equation.
...and more importantly how do I fix it.
When my Excalibur automatically tries to access data services while plugged in I always get a message about not having the right settings.
And on ActiveSync on my PC in the Microsoft Exchange part it says "Attention Required", and when I click on that it says something about checking the data settings on my device.
By default when you connect to active sync your dash uses your PCs connection. If your PC doesn't have an internet connection then you wont be able to use the data connection while plugged in via usb. Activesync has a setting that allows you to use your devices wireless services while plugged in via usb.
quiksand said:
By default when you connect to active sync your dash uses your PCs connection. If your PC doesn't have an internet connection then you wont be able to use the data connection while plugged in via usb. Activesync has a setting that allows you to use your devices wireless services while plugged in via usb.
Click to expand...
Click to collapse
Well I do have an internet connection, so I guess something isn't set up correctly. What would that be?
And what is this setting to allow me to use my EDGE connection?
In activesync go to file > conection settings > Allow wireless connection on device when connected to the desktop.
quiksand said:
In activesync go to file > conection settings > Allow wireless connection on device when connected to the desktop.
Click to expand...
Click to collapse
cool thanks, I'll try that when I get home.
quiksand said:
In activesync go to file > conection settings > Allow wireless connection on device when connected to the desktop.
Click to expand...
Click to collapse
thanks for the TIP
quiksand said:
In activesync go to file > conection settings > Allow wireless connection on device when connected to the desktop.
Click to expand...
Click to collapse
Nope, didn't work. I have that checked off and I still can't connect while plugged in.
can't access data while chargin on pc
Yes I started having the same problem after I changed to the new HTC ROM. My settings are correct on activesync.
Similar issue...
Hey,
I believe I'm having a similar problem and rather than starting a whole new thread I just thought I'd mention it here. I have a wireless connection router in my home, and generally it works fine for all of us. However, everytime I plug my phone in (since upgrading to ricky's rebake of kavana's ****40) my wireless connection goes all haywire and bumps me off. Then, even after I've unplugged the phone for a while, it is still a little weird until I reset everything, restart my pc and all. Any thoughts?
-Nate
Chillin said:
Nope, didn't work. I have that checked off and I still can't connect while plugged in.
Click to expand...
Click to collapse
You want it checked to use EDGE while connected to your PC.
If you are using T-mobile data plan(19.99/mo) you will need to delete the 2 proxy entries under connections to make edge work right after using the HTC connection setup wizard. I think those proxy entries are for if you have the 5.99 t-zones plan. I had to delete them, and set my t-mobile data connection to Connect to The Internet to get my apps working right after upgrading.
Sorry, I really have searched everything I can think of. I have looked all over, I am just trying to find out what the regedit is to use the internet connection on my computer via usb on my t-mobile dash. I am running WM6.1 and have no signal over here for my phone. internet on the computer yes, but dash no. Does anyone know or know where I can look for it? I promise I have searched.
wm1 said:
Sorry, I really have searched everything I can think of. I have looked all over, I am just trying to find out what the regedit is to use the internet connection on my computer via usb on my t-mobile dash. I am running WM6.1 and have no signal over here for my phone. internet on the computer yes, but dash no. Does anyone know or know where I can look for it? I promise I have searched.
Click to expand...
Click to collapse
hook a wifi router up =)
other than that maybe put a bluetooth receiver on the pc and connect the phone to it?
I'm useing kavanas 6.1 rom i tweaked it a little but point being when i plug my dash into my comp and it syncs with active sync my phone accesses my computers internet connection which i think its designed to do. how do your internet and active sync settings look like?
under your USB to PC settings under connections do you have the Enable advanced network functionality checked?
Use ActiveSync to "pass through" this computer. That means the connected device can use the computer's network connection as if it were its own. You can use this feature to perform tasks such as downloading non-Outlook e-mail messages, to connect directly with Microsoft Exchange, or to browse the Internet.
Important Note For additional security, disable network bridging on the PC (specifically, bridging to a Remote NDIS adapter) before connecting to the PC to pass though to the Internet or a network. For more information on network bridging, see Windows Help on the PC.
Click Connection Settings.
Select Open ActiveSync when my device connects.
In the This computer is connected to list, select a connection to which this computer should connected when passing through ActiveSync.
thats from activesyncs help.
i guess i never realized it did that...yet i do it everyday...when its plugged in, edge doesnt even try to connect, it defaults to the pc
Thanks
Ok Gixxum,
You rock, I changed my deal to internet instead of automatic and it worked perfectly. I never thought to look there. Thanks. Now my roomate and I can surf the net at the same time.
wm1 said:
Ok Gixxum,
You rock, I changed my deal to internet instead of automatic and it worked perfectly. I never thought to look there. Thanks. Now my roomate and I can surf the net at the same time.
Click to expand...
Click to collapse
rock on brother
This is on an HTC Tilt 2, running Energy rom, Cookie, with sense 2.5. So I can use the 3g connection in opera or IE when plugged into the pc, but I my email fails saying connection error or error synchronizing whenever I am plugged into the computer via usb. So my work email (IMAP) won't sync. As soon as I unplug it, it switches to 3g and syncs up.
Specifically, there is a 3g icon (in the stock ROM, an "H" icon in Energy rom) and as soon as I plug in via usb, this switches to the usb connection icon, and I lose email connectivity. . ..
Is there a way to fix or modify some settings so that it will work when it is plugged in via USB?
when you connect your phone to your computer via active sync open your active sync program and look for "mobile device settings" in there you'll see an option to allow data connections on device when connected to PC.
That should fix your issue.
Thank you for that tip! I was puzzled by the same issue.
I wonder why it's apparently disabled by default.
John
Mine is enabled.. . . . still no dice. Any other settings or ideas?
I just tried again, and now it actually connects to my imap account, but when I am plugged in via USB it says my username is wrong check my credentials, but when I unplug, it works fine. . . . Maybe I just need to somehow set it to run from wifi when I am plugged in and then automatically switch when I am not. Not sure how I would even begin to do that. I'd prefer to get the real problem solved.
the problem can be the password was changed recently and that why it may not connect? not sure about this tho
Yeah, checked that. Not the problem. And it works as soon as I unplug it so the login credentials are obviously right, unless there are some other login credentials. It doesn't need the username and pass to my windows account on the desktop, I wouldn't think. . . .l Any other ideas?
Just tried this on another computer and it worked. Still doesn't work on my work laptop. . . Weird. A firewall thing maybe, I don't know.