Ive got a very strange Problem with Direct Push. After flashing HardSPLv7 my direct push doesnt work :S
I know this sounds crazy but ive had a replacement from T-Mobile and tried it before flashing SPL and it worked fine, after and it doesnt work!
Firstly does anyone have any ideas? And secondly if not, is there a way to remove SPL or not?
Thanks
Jas
jaso2005 said:
Ive got a very strange Problem with Direct Push. After flashing HardSPLv7 my direct push doesnt work :S
I know this sounds crazy but ive had a replacement from T-Mobile and tried it before flashing SPL and it worked fine, after and it doesnt work!
Firstly does anyone have any ideas? And secondly if not, is there a way to remove SPL or not?
Thanks
Jas
Click to expand...
Click to collapse
I've been having issues with Direct Push and IMAP after upgrading to Black 2.5, Hardsplv7 and the latest radio.
It sometimes works and other times doesn't.
I can't figure out why.
really weird aint it. and i use DP all time so i need to fix it some how.
Same setup here and have no problems at all. Your sure its not the exchange server or something? Have you tried to connect with something else besides the phone?
yer, ive tried the exact same phone but as it came from T-Mobile and all works fine :S
I know its not the exchange server and its all working fine on other devices
I wonder if it is one of the third party programs messing this up or something in the settings.
i dunno mate, ive even tried downgrading to black 2.0 and it still wont work
jaso2005 said:
Ive got a very strange Problem with Direct Push. After flashing HardSPLv7 my direct push doesnt work :S
I know this sounds crazy but ive had a replacement from T-Mobile and tried it before flashing SPL and it worked fine, after and it doesnt work!
Firstly does anyone have any ideas? And secondly if not, is there a way to remove SPL or not?
Thanks
Jas
Click to expand...
Click to collapse
Try re-flashing and then make sure to not enter your exchange info until after you set up your connection settings. First time I flashed to Black 2.0 I had to HR because I tried entering exchange info first.
I'm using: Black 2.5, Hard SPL v7 and Radion 1.40...all with no problems on my push; it hits my phone before my desktop computer.
Jim
Has anyone figured out why gprs settings & exchange password are disappearing everytime you do a soft reset!!!!!! I flashed to the Dopod new SEA rom from the official HTC 1.23 for Europe. Is there a trick to stop it from disappearing after soft reset or the rom is bogus??
Gilbert
PS: I am writing from the trinity so I apologize if this topic was discussed
its not happening to me!
I am not sure if anyone else is experiencing this but I also seem to have hard-spl 1.07ds and the 3.03 that came with the dopod rom installed in my bootloader. how I know? well if I try to downgrade to the official htc 1.23, I get the 1.07ds in the bootloader and it fails, the I try to reinstall the new dopod wm6 and it works. I have super cided device & I can write to my extended rom. could this be the reason my gprs username and password and my exchange password keep disappearing afTer a soft reset? I made a hard resetusing the two buttons to get it to factory specs & it is still doing it. I have no installed programs.
i don't believe 1.07 is hard-spl, and i don't think you can actually have two spl's on there at the same time. I think one is just being overwritten by the other.
thanks for the clarification. however why in God's name am I losing my connection settings and exchange password everytime I soft reset when I have no programs installed or previously installed cooked roms. I remember the Dopod ANZ version might have had something like this and maybe dopod pulled the rom and promised to put another one in few days. I could be wrong about that.
thanks,
gilbert
I'm also experiencing the same problem and I couldn't find a solution for it.
Have you done a hard-reset after flashing?
Hi,
Gilbert said:
I am not sure if anyone else is experiencing this but I also seem to have hard-spl 1.07ds and the 3.03 that came with the dopod rom installed in my bootloader. how I know? well if I try to downgrade to the official htc 1.23, I get the 1.07ds in the bootloader and it fails, the I try to reinstall the new dopod wm6 and it works. I have super cided device & I can write to my extended rom. could this be the reason my gprs username and password and my exchange password keep disappearing afTer a soft reset? I made a hard resetusing the two buttons to get it to factory specs & it is still doing it. I have no installed programs.
Click to expand...
Click to collapse
Just discovering the flashing thing, so I'm not expert, but as far as I understand 1.07ds is not a hard-spl, but one that is pushed onto the phone by the update utility. To know what "resident" bootloader is on the phone, U need to enter the bootloader mode by pressing power+camera button plus doing a soft-reset.
Furthermore, to avoid installation of another bootloader (like the 3.03), I installed an hard-spl (olipro 1.30) and I put the phone into bootloader mode manually prior to flashing. Otherwise, the udate utility pushes the SPL 1.07ds which does not prevent the installation of the new 3.03 bootloader.
If you have the 3.03 on your device and want to downgrade, have a look at http://trinityguides.info at the Dopod WM6 Guide.
As to the disappearing Exchange password, I do not experience this pb.
Bye
yes, it is happening to me also on SEA version.
to be honest I was not overly impressed with the official SEA version so went back to AX3L's great ROM.
as for why the exchange and GPRS settings get lost, the only thing I seem to see is that it is if I installed or uninstalled some app that needed a reboot. it was not one particular app but I seemed to see the problem after installing / uninstalling themes and the kaiser home plug.
have you done any of these and seen the issue?
BMF
badmelonfarmer said:
yes, it is happening to me also on SEA version.
to be honest I was not overly impressed with the official SEA version so went back to AX3L's great ROM.
as for why the exchange and GPRS settings get lost, the only thing I seem to see is that it is if I installed or uninstalled some app that needed a reboot. it was not one particular app but I seemed to see the problem after installing / uninstalling themes and the kaiser home plug.
have you done any of these and seen the issue?
BMF
Click to expand...
Click to collapse
My pop3 account was gone after my FIRST flash with WM6 and install of the Kaiser home plugin. But then I did a hard reset, flash WM6 SEA again, and again hard reset. No problems at all anymore... Thats why I stated the hard reset
after hours of playing with the my bloody machine, i seem to have pinpointed the bloody problem. it is the new windows messenger doing all this crap. I am not sure how as I did not go through the codes but when I don't set up windows messenger and merge the contacts with the device, even if i do a thousand soft reset, the connection to the gprs automatically comes on and my exchange syncs no problem. but when you set up messenger with the device, you start getting the same crap of disappearing gprs settings and exchange password!!!
questsin said:
its not happening to me!
Click to expand...
Click to collapse
Me too.SEA version
What a total pain! Guess I'll stick with just the radio upgrade for now then.
I was going to suggest that if things seem funky after a ROM flash it is always worth trying a re-flash in case something just went a little awry first time around. But the fact others have found the same issue seems to clearly warn that this is not a one off misfortune.
Many thanks for letting everyone know... and good luck with straightening it out.
different experience
I had lost my Exchange passward and the Cingular GPRS setting info a couple of times, but after my back up today, I lost all the settings to the point that I couldn't even connect to Wi-Fi. I hadn't done a hard reset after my flash, so I am doing that now. I never set up Messenger, so I can't imagine how that could be the problem.
Would that be the same problem as the device password that some others were screaming in other threads about wrong device password?
http://forum.xda-developers.com/showthread.php?t=317841
I would guess that there's a credential database WM uses to store usernames and passwords, just like your desktop windows OS, and it either got corrupted on the memory or failed to write back to the filesystem after resetting the device.
The result would then be lost passwords, including device passwords, gprs, exchange, mails, wifi...
I have the ANZ official ROM and see the following problems (which I reported a while ago)
1) GPRS password occasionally gets blanked.
2) WEP password lost occasionally
3) Windows Live password lost occasionally .
I can't figure out what causes it- I rarely soft reset, preferring to turn off.
The biggest PITA is that my device code changed, which means I cannot use TT traffic until I get a letter from HTC.
Hmm, i'm suffering this problem also. It is mentioned in one of the various topics of the WM6 - Roms but really doný know where anymore. Anyone knows if this is possible to tackle?
Thanx!
Riel
Riel said:
Hmm, i'm suffering this problem also. It is mentioned in one of the various topics of the WM6 - Roms but really doný know where anymore. Anyone knows if this is possible to tackle?
Thanx!
Riel
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=342269
It's not the solution I guess.
I use Prophet, but this is only topic of it.
I can't make a new account, it sais 'Name exists'. But it isn't showing up, and can't find it in the registry ...
Any ideas were to remove the old ones?
No problems for a while
I followed some guidance after having the problems, and for a good many weeks it's been fine (maybe over a month).
I set all the passwords (web, WIFI) and BT pairing.
Then I turned the device off with the power buton (NOT soft reset).
SInce then, it has all stuck.
I recently just pulled out my BA from my cupboard, wanting to use. Succussfully installed WM6 on it, no problems wat so eva
But....
I put a sim card in it, it picks up a perfect signal, but then when i come to dial any number, it shows its ringing, then afta 1 sec, just cuts it.
Can somebody out there pls help with this problem, or at least tell me whats happening.
Thank You.. Dal.
try doing a hard reset...hopefully that'll do it
Ive tried doing a hard reset ive even updated the software still no oy i ve no idea what has happeed to it, is anyone out there can help me with this?
Try searching the forum Keywords- Hard Reset / Boot Loader
Hi to all.
I have Dopod 818 pro and I install the prophet new Rom.
I gave the password in this.
But now when I give my password it says wrong password.
I gave right and the same which i gave it. But still the problem remains same.
Please help me fast. I cannot use my device.
Thanks in Adv.
Hi friend. I am also having the same problem. I flashed this rom(new improved verison):
HTML:
http://forum.xda-developers.com/showthread.php?t=402283&highlight=zinc
into my O2 XDA Zinc. Whenever I set a password, do a soft reset, my phone cannot recognise my password anymore. I would like to know how to solve this problem too. I suggest you do a hard reset and do not set the password yet.
Helly everybody,
The strangest thing: I installed the wifi improving htc update this morning on my stock rom DHD, which went successfully. Then I was viewing my emails at gmail and suddenly the phone locks. Apparently it is locked from htcsense.com and asking to enter pincode1 to onlock or call owner.
I remember i tried to lock it from the website a few weeks back but it didnt work. Perhaps this is fixed after the update and it remembered the phone must be locked. Or could it be that somebody hacked htcsence and locked my phone?
Now I wouldnt bother much about that but when I enter my pincode it says its wrong while i m 100% sure it s the right one! After 5 attempts I have to wait 300seconds and then the same thing.
Cold reboot didnt help; I cant unlock it from the website either. Does anyone know how to solve this ?
Thanks on beforehand!
Its definitely a problem with HTC Sense. I'd give HTC a call and complain a bit and tell them to fix it immediately.