Ok, I real stumper. I have been using my SP5m for awhile with the ROM build shipped. I installed my Goodlink client on the device with email service and did not run into any problems. I recently saw a post saying a new build was released with AKU2 for this device. I know I waited to reflash my device, but i went ahead and reflashed the device. Everything works perfrectly expect when I install Good back on the device. The service requires a strong password to be entered before using the Good. I am not sure how Good implemented the password screen because upon a reset, the password screen pops up but my keypad does not work! You can see where this is going... If I cannot enter my password, my device is render useless. I had to reflash it (since ActiveSync still works), in order to get it back to working condition. I then test the default MS password system before installing Good and everything worked without a hitch. I then reinstalled Good but the same issue occured.
I tried to be sneaky and install ActiveSync Remote Display on WM5 using instructions at http://www.modaco.com/lofiversion/i...hp/t231820.html but the dang cerdisp2 executable requires you to answer a security question before running and since I can't use my device until it is unlocked and I can't unlock it since my keypad does not work
Does anyone either know who to turn off the security alert when running .exe on the device or know where in the registry to turn off the password security field? Or is anyone running Good on their device using the latest ROM?
lllr
Has anyone figured out why gprs settings & exchange password are disappearing everytime you do a soft reset!!!!!! I flashed to the Dopod new SEA rom from the official HTC 1.23 for Europe. Is there a trick to stop it from disappearing after soft reset or the rom is bogus??
Gilbert
PS: I am writing from the trinity so I apologize if this topic was discussed
its not happening to me!
I am not sure if anyone else is experiencing this but I also seem to have hard-spl 1.07ds and the 3.03 that came with the dopod rom installed in my bootloader. how I know? well if I try to downgrade to the official htc 1.23, I get the 1.07ds in the bootloader and it fails, the I try to reinstall the new dopod wm6 and it works. I have super cided device & I can write to my extended rom. could this be the reason my gprs username and password and my exchange password keep disappearing afTer a soft reset? I made a hard resetusing the two buttons to get it to factory specs & it is still doing it. I have no installed programs.
i don't believe 1.07 is hard-spl, and i don't think you can actually have two spl's on there at the same time. I think one is just being overwritten by the other.
thanks for the clarification. however why in God's name am I losing my connection settings and exchange password everytime I soft reset when I have no programs installed or previously installed cooked roms. I remember the Dopod ANZ version might have had something like this and maybe dopod pulled the rom and promised to put another one in few days. I could be wrong about that.
thanks,
gilbert
I'm also experiencing the same problem and I couldn't find a solution for it.
Have you done a hard-reset after flashing?
Hi,
Gilbert said:
I am not sure if anyone else is experiencing this but I also seem to have hard-spl 1.07ds and the 3.03 that came with the dopod rom installed in my bootloader. how I know? well if I try to downgrade to the official htc 1.23, I get the 1.07ds in the bootloader and it fails, the I try to reinstall the new dopod wm6 and it works. I have super cided device & I can write to my extended rom. could this be the reason my gprs username and password and my exchange password keep disappearing afTer a soft reset? I made a hard resetusing the two buttons to get it to factory specs & it is still doing it. I have no installed programs.
Click to expand...
Click to collapse
Just discovering the flashing thing, so I'm not expert, but as far as I understand 1.07ds is not a hard-spl, but one that is pushed onto the phone by the update utility. To know what "resident" bootloader is on the phone, U need to enter the bootloader mode by pressing power+camera button plus doing a soft-reset.
Furthermore, to avoid installation of another bootloader (like the 3.03), I installed an hard-spl (olipro 1.30) and I put the phone into bootloader mode manually prior to flashing. Otherwise, the udate utility pushes the SPL 1.07ds which does not prevent the installation of the new 3.03 bootloader.
If you have the 3.03 on your device and want to downgrade, have a look at http://trinityguides.info at the Dopod WM6 Guide.
As to the disappearing Exchange password, I do not experience this pb.
Bye
yes, it is happening to me also on SEA version.
to be honest I was not overly impressed with the official SEA version so went back to AX3L's great ROM.
as for why the exchange and GPRS settings get lost, the only thing I seem to see is that it is if I installed or uninstalled some app that needed a reboot. it was not one particular app but I seemed to see the problem after installing / uninstalling themes and the kaiser home plug.
have you done any of these and seen the issue?
BMF
badmelonfarmer said:
yes, it is happening to me also on SEA version.
to be honest I was not overly impressed with the official SEA version so went back to AX3L's great ROM.
as for why the exchange and GPRS settings get lost, the only thing I seem to see is that it is if I installed or uninstalled some app that needed a reboot. it was not one particular app but I seemed to see the problem after installing / uninstalling themes and the kaiser home plug.
have you done any of these and seen the issue?
BMF
Click to expand...
Click to collapse
My pop3 account was gone after my FIRST flash with WM6 and install of the Kaiser home plugin. But then I did a hard reset, flash WM6 SEA again, and again hard reset. No problems at all anymore... Thats why I stated the hard reset
after hours of playing with the my bloody machine, i seem to have pinpointed the bloody problem. it is the new windows messenger doing all this crap. I am not sure how as I did not go through the codes but when I don't set up windows messenger and merge the contacts with the device, even if i do a thousand soft reset, the connection to the gprs automatically comes on and my exchange syncs no problem. but when you set up messenger with the device, you start getting the same crap of disappearing gprs settings and exchange password!!!
questsin said:
its not happening to me!
Click to expand...
Click to collapse
Me too.SEA version
What a total pain! Guess I'll stick with just the radio upgrade for now then.
I was going to suggest that if things seem funky after a ROM flash it is always worth trying a re-flash in case something just went a little awry first time around. But the fact others have found the same issue seems to clearly warn that this is not a one off misfortune.
Many thanks for letting everyone know... and good luck with straightening it out.
different experience
I had lost my Exchange passward and the Cingular GPRS setting info a couple of times, but after my back up today, I lost all the settings to the point that I couldn't even connect to Wi-Fi. I hadn't done a hard reset after my flash, so I am doing that now. I never set up Messenger, so I can't imagine how that could be the problem.
Would that be the same problem as the device password that some others were screaming in other threads about wrong device password?
http://forum.xda-developers.com/showthread.php?t=317841
I would guess that there's a credential database WM uses to store usernames and passwords, just like your desktop windows OS, and it either got corrupted on the memory or failed to write back to the filesystem after resetting the device.
The result would then be lost passwords, including device passwords, gprs, exchange, mails, wifi...
I have the ANZ official ROM and see the following problems (which I reported a while ago)
1) GPRS password occasionally gets blanked.
2) WEP password lost occasionally
3) Windows Live password lost occasionally .
I can't figure out what causes it- I rarely soft reset, preferring to turn off.
The biggest PITA is that my device code changed, which means I cannot use TT traffic until I get a letter from HTC.
Hmm, i'm suffering this problem also. It is mentioned in one of the various topics of the WM6 - Roms but really doný know where anymore. Anyone knows if this is possible to tackle?
Thanx!
Riel
Riel said:
Hmm, i'm suffering this problem also. It is mentioned in one of the various topics of the WM6 - Roms but really doný know where anymore. Anyone knows if this is possible to tackle?
Thanx!
Riel
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=342269
It's not the solution I guess.
I use Prophet, but this is only topic of it.
I can't make a new account, it sais 'Name exists'. But it isn't showing up, and can't find it in the registry ...
Any ideas were to remove the old ones?
No problems for a while
I followed some guidance after having the problems, and for a good many weeks it's been fine (maybe over a month).
I set all the passwords (web, WIFI) and BT pairing.
Then I turned the device off with the power buton (NOT soft reset).
SInce then, it has all stuck.
Hello i just got an loox t830...but when i turned it on it says " new sim detected enter phome code...", the person that selled it to me don't reply my email at all, i've asked him the code several times.. is it possible to unlock the phone to use my sim...it seams that the old owner programed it and doesn't disabled before shiping it to me...
many thankx~
have you tried a hard reset ?
Hard reset does not help in this situation
Hard reset,
hard reset should work, otherwise you can reflash rom.
Hard reset, not work - TESTED!
Still serching solution!
try using various operator sims
it sounds to me like the phone u were sent is locked to a certain operator
I try three different operators - the same thing!
I think the phone is locked to the card not to operator.
I know the first owner of the phone, but he can't remember the phone code.
I try ROM update and the factory reset - nothing!
The only way I can unlock the phone is to use the Programs application from the original WM5 - "Phone Lock" but the default "00000000" don't work.
If any idea - pls share, I'll try everything!
Thanks
@meshuggah
I try three different operators - the same thing!
I think the phone is locked to the card not to operator.
I know the first owner of the phone, but he can't remember the phone code.
I try ROM update and the factory reset - nothing!
The only way I can unlock the phone is to use the Programs application from the original WM5 - "Phone Lock" but the default "00000000" don't work.
i have the same problem have you solved yet yours?
same problem. someone please help
Hi there,
2 Days ago I just upgraded to the new official Dutch ROM.
Everyhting seemed ok, untill now.
The TP2 is password protected and I can't unlock it anymore.
It says that I'm entering the wrong password but I know it's correct.
This morning it still worked.
I know I can solve the problem with a hard reset, but then I'll loose my whole contact list.
Does anyone know what I can try?
Thanks in advance.
THEDARKEST said:
Hi there,
2 Days ago I just upgraded to the new official Dutch ROM.
Everyhting seemed ok, untill now.
The TP2 is password protected and I can't unlock it anymore.
It says that I'm entering the wrong password but I know it's correct.
This morning it still worked.
I know I can solve the problem with a hard reset, but then I'll loose my whole contact list.
Does anyone know what I can try?
Thanks in advance.
Click to expand...
Click to collapse
Same thing happened to me just now. Trust me IT IS FRUSTRATING! i will do a search around in case some one has a solution.
Hi,
i've a eten glofiish x610 Phone since one year.
Yeasterday i've a message "Fatazl error, reboot your phone" or something like this.
Every time i turn on the phone, the initial setup begin (i lose all my data).
The Gps locator is launched.
The phone is very slow.
The phone is very often disconnect.
I've tried the reset but its always the same.
I'm lloking for the initial rom (WM 6.1 in french) and the program to use rom to try to resolve this problem.
Thanks for your help and sorry for my english.
Copper