I have ran the original o2 formware program and it will not program the zest. The zest firmware update utility keeps telling me "check the language is the same as ..."
So how do you downgrade the o2 zest to original firmware after running wm6.5 ...?
Help needed please.
Bob
blobby12uk said:
I have ran the original o2 formware program and it will not program the zest. The zest firmware update utility keeps telling me "check the language is the same as ..."
So how do you downgrade the o2 zest to original firmware after running wm6.5 ...?
Help needed please.
Bob
Click to expand...
Click to collapse
Hi,
When you get this message, you should find a file called "tmp_rom.abi" in the same directory as the firmware update utility (you need to Show Hidden Files first - http://www.microsoft.com/windowsxp/using/helpandsupport/learnmore/tips/hiddenfiles.mspx).
Before clicking "OK" on that message, copy tmp_rom.abi to another folder. When finished, close the update utility. Rename "tmp_rom.abi" to "GM5_WWE_Zest.abi" and copy to your SD Card. Then flash as you did the WM6.5 one (Navpad Down + Reset).
Just to say thankyou for your response , my zest is back to original op sys.
Regards
Bob
strange, just trying this and the bootloader never finds the file...interesting
Buck_Rodgers said:
strange, just trying this and the bootloader never finds the file...interesting
Click to expand...
Click to collapse
Make sure on the SD Card the file is called GM5_WM61Downgrade.abi or something like that. It has to start with GM5_ and end with .abi
done a few before, but for some reason, just never works with the file i've ripped/extracted from the update program. it's there, named correctly. I'm absolutely puzzled
Buck_Rodgers said:
done a few before, but for some reason, just never works with the file i've ripped/extracted from the update program. it's there, named correctly. I'm absolutely puzzled
Click to expand...
Click to collapse
make sure the abi file is not hidden. Sometimes the bootloader doesn't see hidden files.
i followed the instructions not to hide the files on my pc. that wht you mean? (your being really helpfull by the way thankyou)
Buck_Rodgers said:
i followed the instructions not to hide the files on my pc. that wht you mean? (your being really helpfull by the way thankyou)
Click to expand...
Click to collapse
no problems do you have more than one abi file on your storage card? If so ensure there is only the 6.1 one on there.
nope, just the one .abi file. i've renamed it a couple of times too (but still following the GM5_xyz.abi nomenclature). its insane in the membrane lol, i see a few other users here have done it....why not me? i feel like a leper lol
Buck_Rodgers said:
nope, just the one .abi file. i've renamed it a couple of times too (but still following the GM5_xyz.abi nomenclature). its insane in the membrane lol, i see a few other users here have done it....why not me? i feel like a leper lol
Click to expand...
Click to collapse
Lol. Keep trying, if you upgraded to WM6.5 this way, you will be able to downgrade wo WM6.1
Right-click on the ABI file, go to "Properties" and ensure "Hidden" is unticked.
well god damn!! you have the patience of a saint for dealing with stupid people....sir i salute you lol.... it was hidden in the file properties....i feel......like a retard lol. Thanks very much man, i just wasn't having any luck with custom roms, tried a few of yours but all intermittently froze. I'll try this today, and if still no joy, gonna get a tg01 tomorrow and sell this to CEX just to get rid of it. Thanks once again!!!
Related
im a bit confused about all the threads about Qtek 9000 rom's..
however, it seems that Dangaard in my country will NEVER deliver an official ROM update..
IS there a working update for the Qtek 9000, that I can download somewhere?
Right now i have version 1.13.64 WWE, Radio 1.03.00
Please help a newbie
Do what I did, run a million bullet through the qtek 9000 and weep for never buying another peice of crap brand!
Gilbert
Qtek Rom
Gilbert, I have a Qtek 9000 and I installed the new i-mate Rom: working fine!
You can do the same :wink:
Gilbert said:
Do what I did, run a million bullet through the qtek 9000 and weep for never buying another peice of crap brand!
Gilbert
Click to expand...
Click to collapse
Or, download the Jasjar Rom 1.30.76 and flash. It is very easy and works like a dream.
megaraid said:
Gilbert said:
Do what I did, run a million bullet through the qtek 9000 and weep for never buying another peice of crap brand!
Gilbert
Click to expand...
Click to collapse
Or, download the Jasjar Rom 1.30.76 and flash. It is very easy and works like a dream.
Click to expand...
Click to collapse
Thank you, were du i find this?
Jasjar Rom 1.30.76
ftp://ftp.clubimate.com/JASJAR_WWE_13076_164_10900_wwe_ship.zip
You need maupgradeut_noid
:lol:
Re: Jasjar Rom 1.30.76
Ecraseur said:
ftp://ftp.clubimate.com/JASJAR_WWE_13076_164_10900_wwe_ship.zip
You need maupgradeut_noid
:lol:
Click to expand...
Click to collapse
Hi!
And thank you..
what do I do with the maupgradet_noid?
MaUpgradeUt_noID.exe
MaUpgradeUt_noID.exe is a to Tool to avoid country ID and Operator ID errors.
MaUpgradeUt_noID.exe
MaUpgradeUt_noID.exe is a to Tool to avoid country ID and Operator ID errors.
MaUpgradeUt_noID.exe
MaUpgradeUt_noID.exe is a to Tool to avoid country ID and Operator ID errors.
Re: MaUpgradeUt_noID.exe
Ecraseur said:
MaUpgradeUt_noID.exe is a to Tool to avoid country ID and Operator ID errors.
Click to expand...
Click to collapse
Do I run it on my PC or Qtek?
Right now it wont start on the PC...
What you do is unpack the contents of the rom exe file into a directory, then you take your noid exe file and put in the same folder as the rom files, or the same folder of the normal loader file, and run the no id. This may vary depending on the layout of the contents in the big rom exe file, and yes you run the stuff on your pc, while having your Universal connected to the computer in Active Sync usb linked mode...
If you get the hassel of the country id after running it first time, quickly run it again and DUN touch the pda no matter what wierd setting it may be in, sometimes the first time only put the device into bootload mode, and then give an error message, but when run the second time itll flash the pda correctly hope this will help you.
theorion said:
What you do is unpack the contents of the rom exe file into a directory, then you take your noid exe file and put in the same folder as the rom files, or the same folder of the normal loader file, and run the no id. This may vary depending on the layout of the contents in the big rom exe file, and yes you run the stuff on your pc, while having your Universal connected to the computer in Active Sync usb linked mode...
If you get the hassel of the country id after running it first time, quickly run it again and DUN touch the pda no matter what wierd setting it may be in, sometimes the first time only put the device into bootload mode, and then give an error message, but when run the second time itll flash the pda correctly hope this will help you.
Click to expand...
Click to collapse
Thank you!
I cant get it to work..
It just shows the screen thats supposed to show witch ROM i have, and witch one Im upgrading to.. but no data- Just blanks.
If i press "Upgrade" it finishes after 30 sec, and says "Congratiolations" and so one..
but nothing is happening on my qtek?
When you unpack the .EXE ROM files, there are 2 directories worth of files, you have to transfer all the files in these directories to one directory, then put the MAUpgradeUT_NOID in same directory then run from there.
Maybe MAUpgrade is all by it's lonesome self in that directory
Works!!
thanks everyone!!
Now:
How does this MIcrosoft directpush work? Cant seem to find any settings for it. But when i select "when new items arrive" i can see the symbol is highlighted in the commmanager.
Bestchops said:
Works!!
thanks everyone!!
Now:
How does this MIcrosoft directpush work? Cant seem to find any settings for it. But when i select "when new items arrive" i can see the symbol is highlighted in the commmanager.
Click to expand...
Click to collapse
Go to 4smartphone.com .... They have trial host exchange server push e-mail thingy so you can try it out. Everything is there at their site regarding push email setup
make sure all the files are in the same folder then, like this fx,
enterbl.exe
getdevicedata.exe
MaUpgradeUt_noID.exe
ms_.nbf
nk.nbf
radio_.nbf
ruu.conf
ruu.dll
ui.dll
And try running the file then...
Btw i presume you are trying to upgrade to Universal_Upgrade_v1.30.68_radio_1.09.0
the extended rom gets to 1.30.153 WWE
Hi All
Have a problem with my latest phone. A so called friend told me to upgarde the ROM so as to remove all the T Mobile poop in it. So he gave me the software I started the upgrade all went well stage 1 then stage 2 and finally stage 3. It said Congrats just hit reset and the power button at the same time and its done. Easy Me thought..... Not Easy....... Its now just booting up and screaming at me. The screen wont lite up and nothing else. I have tries to reset over 10 times now.....Anyone got any ideas, have I shot and killed my new phone...
Ta JG
this is not good. do you know which phone you are having? MDA is all the phoen from t-mobile. First identify your phone. Then, you need to know if you are using the right ROM on the right phone. THEN, you have to know are you using the right phone ROM on the phone (eg G3 or G4).
Its an MDA Copmact 11 does that help....
common.. more info. which rom you've used?
Alpine_Ext-1.11.162_Radio-1.04_stuffstripped_Camera_Fixed.
SORRY i AM NEW TO THIS AND i AINT GOT A CLUE WHAT i AM DOIN...HE HE HE
Oh forgot to mention it all went in ok, stage 1, 2, 3 and even told me on my computer it had worked. It was when I tried the power and reset that it all came tumbling down........
JeanGenie said:
Oh forgot to mention it all went in ok, stage 1, 2, 3 and even told me on my computer it had worked. It was when I tried the power and reset that it all came tumbling down........
Click to expand...
Click to collapse
All I would like to do is get the old stuff back then worry about an upgarde later can this be done without me having to do unspeakable things to the phone????
You've just flashed your Charmer phone with an Alpine ROM. If that doesn't kill your phone, I'm not sure what will.
Ok, try this. Hold down all 3 buttons -> power, camera, record buttons, and poke the reset. See if you can get a 3 colours screen.
If you get that, close active sync (stop the process WCESCOMM.EXE), connect your phone to your PC (when it is displaying the 3 colour screen). Then you ought to be able to run the ROM update file (EXE) from t-mobile (check the Charmer Wiki) and that may fix your problem.
hanmin said:
You've just flashed your Charmer phone with an Alpine ROM. If that doesn't kill your phone, I'm not sure what will.
Ok, try this. Hold down all 3 buttons -> power, camera, record buttons, and poke the reset. See if you can get a 3 colours screen.
If you get that, close active sync (stop the process WCESCOMM.EXE), connect your phone to your PC (when it is displaying the 3 colour screen). Then you ought to be able to run the ROM update file (EXE) from t-mobile (check the Charmer Wiki) and that may fix your problem.
Click to expand...
Click to collapse
I have done what you have said, I think...DUHHHH the screen has not lit up but its now showing USB in the top and V1.02 in th ebottem. I have connected it to my computer but active sync has not cut in yet....... I assume I have done it wrong....
hey
you DONT want activesync to cut in
put it in that 'usb mode' that you managed to get and just run the OFFICIAL T-Mobile rom update utility, but make sure to kill the wcesscomm process in windows' task manager.
good luck!
duke_stix said:
hey
you DONT want activesync to cut in
put it in that 'usb mode' that you managed to get and just run the OFFICIAL T-Mobile rom update utility, but make sure to kill the wcesscomm process in windows' task manager.
good luck!
Click to expand...
Click to collapse
I have just downloaded the t-mobile update as below
RUU_Compact ll_2060227_20602110_021921_T-MobileUK_Ship
I have switched off the file as you have said in the task manager. The update laods then says cannot find MDA Device connection error 274.
Could a system restart help?????
Sorry for all this, maybe stick to things I do know in the future, like washing my car.......
hey
get your phone back into that screen which had 'usb' written on it.
then do this:
download and install a program called 'winrar', you've probably heard of it and in all likelihood already have it!
once its installed, right click that t-mobile update you just download and select the 'extract to.../' option that will come up in the drop down menu, let it extract to the folder it does, open the folder in there will be a few files: you want the file which is called something along the lines of 'upgrateUT' or RUU Upgrade UT, it'll be an exe,
connect your phone up to the computer (with it in the USB mode and activesync disabled) and run that exe, it should go through as normal
good luck
(if you want any help just post back! best bet is for you to extract the files and report back with the name of the files in the folder!)
duke: I think he did that. He downloaded the EXE from http://www.tm-phonedownloads.com/download_manager_mda_com2.html
and it seems not able to detect his Charmer.
JeanGenie: Just to make sure, when you run that EXE, you have the phone connected with it displaying USB?
duke_stix said:
hey
get your phone back into that screen which had 'usb' written on it.
then do this:
download and install a program called 'winrar', you've probably heard of it and in all likelihood already have it!
once its installed, right click that t-mobile update you just download and select the 'extract to.../' option that will come up in the drop down menu, let it extract to the folder it does, open the folder in there will be a few files: you want the file which is called something along the lines of 'upgrateUT' or RUU Upgrade UT, it'll be an exe,
connect your phone up to the computer (with it in the USB mode and activesync disabled) and run that exe, it should go through as normal
good luck
(if you want any help just post back! best bet is for you to extract the files and report back with the name of the files in the folder!)
Click to expand...
Click to collapse
okie dokie...have extracted all th efiles and these are what I have got in a seperate folder
EnterBootloader
nk.nbf
README
ROMUpdateUtility
RUUGetInfo
RUUResource.dll
Thats all the files inside the folder
is "ROMUpdateUtility" an EXE file? try running that.
hanmin said:
is "ROMUpdateUtility" an EXE file? try running that.
Click to expand...
Click to collapse
I have and after a few seconds it says error 274 cannot find device....!!!!
well, it is amazing that you can go into the bootloader at all. I'm suspecting that the bootloader is not the Chamer bootloader, hence the ROM update EXE is not able to find it. Where did you download the Alpine ROM. Give exact link.
UPDATE: Look at the post here
http://forum.xda-developers.com/showthread.php?t=269329&highlight=
by 'windowsceportal'. He is able to flash the phone with 'Prophet RUU 2.5.2 noID check' with the DLL RUUResource.dll of Charmer RUU. I'm not very certain, but the noIdCheck may able to help.
UPDATE: As according to this post
http://forum.xda-developers.com/showthread.php?t=280128&highlight=
the bootloader mode that you are having is that of an Alpine (Charmer's bootloader mode is a screen with 3 colours). So, probably the updating program doesn't work. However, as an idea, you may want to try getting alpine upgrading EXE files to load Charmer ROM into the phone. It is an idea, not sure how can this be achieved.
hanmin said:
well, it is amazing that you can go into the bootloader at all. I'm suspecting that the bootloader is not the Chamer bootloader, hence the ROM update EXE is not able to find it. Where did you download the Alpine ROM. Give exact link.
UPDATE: Look at the post here
http://forum.xda-developers.com/showthread.php?t=269329&highlight=
by 'windowsceportal'. He is able to flash the phone with 'Prophet RUU 2.5.2 noID check' with the DLL RUUResource.dll of Charmer RUU. I'm not very certain, but the noIdCheck may able to help.
UPDATE: As according to this post
http://forum.xda-developers.com/showthread.php?t=280128&highlight=
the bootloader mode that you are having is that of an Alpine (Charmer's bootloader mode is a screen with 3 colours). So, probably the updating program doesn't work. However, as an idea, you may want to try getting alpine upgrading EXE files to load Charmer ROM into the phone. It is an idea, not sure how can this be achieved.
Click to expand...
Click to collapse
This is the link i used to get the original upgrade
ftp://xda:[email protected]_Radio-1.04_O2stuffstripped_Camera_Fixed.rar
Does that help any...
JeanGenie said:
This is the link i used to get the original upgrade
ftp://xda:[email protected]_Radio-1.04_O2stuffstripped_Camera_Fixed.rar
Does that help any...
Click to expand...
Click to collapse
Is there anyway of just deleting the Alpine ROM and reinstalling the correct charmer. I, as you have probably guessed aint got a clue what I am doing never lone saying...he he he
Just a thought.......
Plus my new XDA IIi was delieverd today am I being silly when I say I have been told that I can debrand it with the Alpine rom as listed above, dont want to try anything incase this phone goes belly up also....
Hellllppppp...........
Its me again, can anyone make any other suggestions to my problem please. I have tried in vain to do what has been already suggested but it seems either it wont work or more to the point I have no clue as to what I am doing.
Just happened to find this fix at HTC Europe support site.
Currently it seems to work OK on my TyTN / Black 3.0.1.
Read more here - http://www.europe.htc.com/support/faq.html?id=545&device=htctytn
Dukas said:
Just happened to find this fix at HTC Europe support site.
Currently it seems to work OK on my TyTN / Black 3.0.1.
Read more here - http://www.europe.htc.com/support/faq.html?id=545&device=htctytn
Click to expand...
Click to collapse
there's no download link,but for p3300
Dukas said:
Just happened to find this fix at HTC Europe support site.
Currently it seems to work OK on my TyTN / Black 3.0.1.
Read more here - http://www.europe.htc.com/support/faq.html?id=545&device=htctytn
Click to expand...
Click to collapse
Hi, this is already posted here:- http://forum.xda-developers.com/showthread.php?t=307614 and in the upgrading threads regarding storage card problems.
But never mind, did you have problems with your storage card before using the fix with Black 3?
Regarding the fact that it is for the p3300 (Artemis) it is an official fix and works for both that model and the Tytn.
monkeysheva said:
there's no download link,but for p3300
Click to expand...
Click to collapse
try this..
boz said:
Hi, this is already posted here:- http://forum.xda-developers.com/showthread.php?t=307614 and in the upgrading threads regarding storage card problems.
But never mind, did you have problems with your storage card before using the fix with Black 3?
Regarding the fact that it is for the p3300 (Artemis) it is an official fix and works for both that model and the Tytn.
Click to expand...
Click to collapse
shall rename to sdhc.dll and then copy to \windows?
monkeysheva said:
shall rename to sdhc.dll and then copy to \windows?
Click to expand...
Click to collapse
It is a cab file, follow these instructions that were given with the cab file on the site:-
1/ Copy the file to your device using ActiveSync. To do so:
-> Ensure first that ActiveSync is installed on your PC already. If it is not, please install it using the CD that came with your device.
-> Then connect your device to your PC. You can choose to connect the device to your PC as either a guest or a standard partnership, it does not matter for installing a .cab file.
-> Once the device connects to the PC, press Explore in the ActiveSync menu bar and copy the cab file there.
-> Your file explorer window should show the .cab file
2/) Use File Explorer to find the file and click on it to start the installation. Follow the on-screen instructions.
3/ Switch the phone off and back on.
NOTE:- Should you need to carry out a Hard-Reset on your device then this CAB file will be lost
and you will need to reinstall it on your handset.
boz said:
It is a cab file, follow these instructions that were given with the cab file on the site:-
1/ Copy the file to your device using ActiveSync. To do so:
-> Ensure first that ActiveSync is installed on your PC already. If it is not, please install it using the CD that came with your device.
-> Then connect your device to your PC. You can choose to connect the device to your PC as either a guest or a standard partnership, it does not matter for installing a .cab file.
-> Once the device connects to the PC, press Explore in the ActiveSync menu bar and copy the cab file there.
-> Your file explorer window should show the .cab file
2/) Use File Explorer to find the file and click on it to start the installation. Follow the on-screen instructions.
3/ Switch the phone off and back on.
NOTE:- Should you need to carry out a Hard-Reset on your device then this CAB file will be lost
and you will need to reinstall it on your handset.
Click to expand...
Click to collapse
ahaa, i've already known that, but i notice that the file name is omap850sdhc.dll, so the path maybe only for TI cpu.
monkeysheva said:
ahaa, i've already known that, but i notice that the file name is omap850sdhc.dll, so the path maybe only for TI cpu.
Click to expand...
Click to collapse
No you just run it as it is.
boz said:
No you just run it as it is.
Click to expand...
Click to collapse
well, i give it a try, thx a lot
Do we know what the cab does?
I think i'ts important to know what was fixed, and how to fix it in WM6.
elivne said:
I think i'ts important to know what was fixed, and how to fix it in WM6.
Click to expand...
Click to collapse
It supposedly fixes problems you can have with the storage card not being recognised by your device. See this thread for the problems that can be fixed by this:-
http://forum.xda-developers.com/showthread.php?t=294324
boz said:
It supposedly fixes problems you can have with the storage card not being recognised by your device. See this thread for the problems that can be fixed by this:-
http://forum.xda-developers.com/showthread.php?t=294324
Click to expand...
Click to collapse
TNX, I am aware of the problems, I just want to know what did HTC fix to solve them, was it a new driver? was it a simple REG hack?
IT IS NOT FOR TYTN.!!!!
If you switch the last word with htcp3300 or htc p3600 will show the page again. http://www.europe.htc.com/support/fa...device=" htctytn"
It will show it even if you put "lagoskon" .
Someone just put the word htctytn at the end.
You can't find the page if you begin from tytn support.
So don't bother with this fix...We will have to wait..
None of the recent WM6 ROMs I've been running have this issue anyway...
URPREY said:
None of the recent WM6 ROMs I've been running have this issue anyway...
Click to expand...
Click to collapse
I have to disagree. I still have this issue with various WM6 releases, albeit at a much reduced rate than with WM5.0. I believe this is hardware related and the software fix(es) may work for some people, but not all.
John
Thanks for clearing it up lagoskon. I took apart the cab and was mystified that the dll was omap processor specific.
Sleuth255 said:
Thanks for clearing it up lagoskon. I took apart the cab and was mystified that the dll was omap processor specific.
Click to expand...
Click to collapse
I agree with that after I have had reports back on it, seems to make the problem worse because it is not a true Hermes fix.
where can i download photo contacts pro 5 from. I would love to have this!!!!!
Here you go
when i try and use the file i get a error message. Is there a cab file for it
What cab are you looking for exactly?
1/26/08 said:
when i try and use the file i get a error message. Is there a cab file for it
Click to expand...
Click to collapse
Haha extract it to your computer and then drag it to your phone because thats a .zip file and your phone does not recognize a .zip file.
ok we i try to install and rin the file on my phone it gives me a message sayn (photocontactpro sp v40 signed is not a valid windows ce application)
ummm let me try to see whats wrong with it.
1/26/08 said:
ok we i try to install and rin the file on my phone it gives me a message sayn (photocontactpro sp v40 signed is not a valid windows ce application)
Click to expand...
Click to collapse
Download this and see if this will work ok. http://rs117.rapidshare.com/files/54653658/photocontactsprov507l.zip
i get the same message
Umm try to run it from the computer and see what happens.
it runs the file jz fine
oh ok so did you get it working then?
not on my fone is there a way i can get diz in a cab file?
1/26/08 said:
not on my fone is there a way i can get diz in a cab file?
Click to expand...
Click to collapse
ummm I am not sure, I know that a .cab file would solve everything.
yeah it really would. well thankz alot!! for your help in time if you find something out jz let me know
Just so you all know programs like these use your computer to install the program.
Make sure your phone is connected using a usb cord and it'll install it.
you might need to App Unlocl your phone. goto: mobile.surrealnetworks.com and click on applications for Dash. there is one or two programs that will unlock your phone to allow various programs to be installed. that might do the trick. someone correct me if im wrong.
...just my $.02
sunday247 said:
you might need to App Unlocl your phone. goto: mobile.surrealnetworks.com and click on applications for Dash. there is one or two programs that will unlock your phone to allow various programs to be installed. that might do the trick. someone correct me if im wrong.
...just my $.02
Click to expand...
Click to collapse
Yea or here are the files to app unlock install the first one and then second one.
Newbie: Photo Contacts Pro 5 info
Hi All,
I am a newcomer to this forum and let me tell you that you guys do a great job with coming up with information and guidelines on Excalibur software so I have to give you applause for that. Does anybody have any info on this? I have the demo and it seems like it is a good application.
Thanks
I loathe photo contacts pro 5..... version 4.03 was and is the best one for the excalibur. my reasoning? after 4.03 the program doesn't run in the background. It shows up in task managers and is easly closed which defeats the purpose of having the program. It also takes up more memory and is even more laggy then version 5. if you can find a version 4.03 i highly recommend you try it.
I was updating my freinds dash, he had official rom on it, i went to rose rom v1.7a and also kavana final and some others and then i went back to latest t-mobile official rom 1.16 something, and all of them now say "drivers is not loaded" when you go to look at the wifi status, I loaded the WM2005 SDIO wifi drivers cab and also got a fresh copy of wifiinit.exe in the windows folder and then put the shortcut to it in the startup folder....i now have it running the rose v1.7a, i am lost, i'm on the phone now with a clueless pda expert at t-mobile.
still no solution to this problem, my friend might have to reflash back to original and do warranty exchange...i don't know what went wrong...he needs a new phone anyways...or maybe get the updated dash
wifiinit.lnk must be in the windows startup folder, or the drivers wont load this has been covered and a forum search would have shown you that
Bupahs said:
wifiinit.lnk must be in the windows startup folder, or the drivers wont load this has been covered and a forum search would have shown you that
Click to expand...
Click to collapse
They are in there, the wifiinit.ink is in startup and the wifiinit.exe is in the windows folder, still no luck...reflashed to original rom (even that didn't work), i'm hoping there is a cab that can reload the driver...but only found SDIO wifi driver cab..those don't work....
pychobj2001 said:
They are in there, the wifiinit.ink is in startup and the wifiinit.exe is in the windows folder, still no luck...reflashed to original rom (even that didn't work), i'm hoping there is a cab that can reload the driver...but only found SDIO wifi driver cab..those don't work....
Click to expand...
Click to collapse
The drivers are included in every ROM I have ever flashed, loading them comes from the .lnk file. So unless you are getting an error that the drivers do not exist or have failed they are their. It is possible your .lnk file is pointing to the wrong location
Bupahs said:
The drivers are included in every ROM I have ever flashed, loading them comes from the .lnk file. So unless you are getting an error that the drivers do not exist or have failed they are their. It is possible your .lnk file is pointing to the wrong location
Click to expand...
Click to collapse
no, becuase i deleted the .ink, copied the .exe from the windows dir and pasted a shortcut of it in the startup folder.....i don't have the dash now..my friend does...I think he should go to the g1, or just grab a 1yr replacement one, but he doesn't want a refurb which is ussaully what they give u
pychobj2001 said:
no, becuase i deleted the .ink, copied the .exe from the windows dir and pasted a shortcut of it in the startup folder.....i don't have the dash now..my friend does...I think he should go to the g1, or just grab a 1yr replacement one, but he doesn't want a refurb which is ussaully what they give u
Click to expand...
Click to collapse
why would you move the exe? How did you make a shortcut if you moved the exe? The G1 sux (sorry to those that think otherwise but it does). You only get a refurb if you dont ask for a new replacement. I always get new, after all I bought a new device not a refurb didnt I?
Anyway, it sounds like you created a bad shortcut for wifi and thats your issue
the .ink file is mising in my startup folder. What should i do? the .exe is still there
nikmash232 said:
the .ink file is mising in my startup folder. What should i do? the .exe is still there
Click to expand...
Click to collapse
Make a new link file, use total commander to do it or if you need I can upload one for you
pychobj2001 said:
I was updating my freinds dash, he had official rom on it, i went to rose rom v1.7a and also kavana final and some others and then i went back to latest t-mobile official rom 1.16 something, and all of them now say "drivers is not loaded" when you go to look at the wifi status, I loaded the WM2005 SDIO wifi drivers cab and also got a fresh copy of wifiinit.exe in the windows folder and then put the shortcut to it in the startup folder....i now have it running the rose v1.7a, i am lost, i'm on the phone now with a clueless pda expert at t-mobile.
Click to expand...
Click to collapse
I have the same problem, the WIFIinit.lnk is in the startup folder, and WIFI is not working. Any help?
majedaly said:
I have the same problem, the WIFIinit.lnk is in the startup folder, and WIFI is not working. Any help?
Click to expand...
Click to collapse
Strange, the problem was due to a defective battery! Seems that when I try to switch on WIFI and SD, the battery level goes down in a way that the OS does not load the drivers. Charged the battery to 100%, and rebooted, everything works normally.
if you have a drivers problem, should try with this...i had the same in my dash...."drivers not loaded"...i put this files on the phone and wifi works again.
Please help
I just got my dash. I upgraded it to the kavanna but then i wanted to give the vanilla version a try since i needed a cleaner version it had a picture of the tmobile shadow but i thought it would be ok since the folder tittle said excalibur. It gave me and error at 3 % saying that the iimage was the incorrect size. Then it started up with kavanna but there was no wifi option. Then i downgraded to wm6 standard but my wifi wont start. When i check the settings it tells me that the driver is not loaded. Ive been looking around in this forum for 2 days. All i see is people saying that this topic has been covered already. I tried the wininit.ink and exe thing and no success. I hard reseted and nothing. I tried different roms and the official tmobile but nothing seems to work. Is there a way to start from scratch???i just want to stick with the official tmobile rom. Please help meee.
Im running vista ultimate
the official tmobile rom latest version
wifi driver not loaded on my htc dash
Hello, I am stuck with this issue. I tried several roms and uspl but nothing happens. I installed 6.0, 6.1 and 6.5 rom versions, no wifi.
I really need help on this since I use this phone to get connected.
Please you can write me so I can see what I have to do to fix this wifi problem.
[email protected]
thanks!
my friend has this same problem it was an easy fix he wasnt running the batch file, are you sure your flashing right?
Bupahs,
Can you please help. I have read this several time and still no luck with WiFi driver. Mine still says driver not loaded. I am new and jus can not figure it out. I have flashed Ookba's 6.5 several time along with the patch.
Thanks
HEEy the same for me, pleas help us!
and microWlan doesn't work in any Roms i tested...
Bupahs said:
wifiinit.lnk must be in the windows startup folder, or the drivers wont load this has been covered and a forum search would have shown you that
Click to expand...
Click to collapse
yes this worked! thank you. i accidentally deleted it when trying to increase startup times. putting this file back in the startup folder got my wifi up and running again. tnx again.