I am a rookie at upgrading this stuff. I have a QTEK 9000. I got UNI_QTEK_13077_176_10900_WWE_Ship.exe from the ftp site.
1) Did a device reset.
2) Connected via active sync.
3) ran the program.
After a short period, The device shut off and active sync disconnected.
The screen is black. On button does not work.
I tried a hard boot and I get the boot menu and 0 or x does not seem to do anything.
Did I do something wrong? What now.
GaryK2 said:
I am a rookie at upgrading this stuff. I have a QTEK 9000. I got UNI_QTEK_13077_176_10900_WWE_Ship.exe from the ftp site.
1) Did a device reset.
2) Connected via active sync.
3) ran the program.
After a short period, The device shut off and active sync disconnected.
The screen is black. On button does not work.
I tried a hard boot and I get the boot menu and 0 or x does not seem to do anything.
Did I do something wrong? What now.
Click to expand...
Click to collapse
I think that program is supposed to be run after you've removed USB from the connection methods in activesync - i.e. you're not connecting via activesync, even though the device is physically connected.
OK, I tried the process again without activesync.
That seems to be the answer. ROM Is now installed. I just have to finish up.
Thanks alot,
That scared the hell out of me.
GaryK2 said:
OK, I tried the process again without activesync.
That seems to be the answer. ROM Is now installed. I just have to finish up.
Thanks alot,
That scared the hell out of me.
Click to expand...
Click to collapse
Hehee... when you get the new rom on, you'll love it...
GaryK2 said:
OK, I tried the process again without activesync.
That seems to be the answer. ROM Is now installed. I just have to finish up.
Thanks alot,
That scared the hell out of me.
Click to expand...
Click to collapse
Sorry for my silly question but how can you process it without activesync, mean you have removed activesync form your conputer?, because my activesync is automatic running when the computer start up
Thanks,
Orangevn
orangevn said:
Sorry for my silly question but how can you process it without activesync, mean you have removed activesync form your conputer?, because my activesync is automatic running when the computer start up
Click to expand...
Click to collapse
You're just telling AS to ignore the Exec when it's connected. The PC itself still sees it and adds a driver on connection. So you're not removing AS from the PC as such.
i have same problem but it doesn't work
please help me....this phone is dead now:-(
Re: i have same problem but it doesn't work
bmlsbr said:
please help me....this phone is dead now:-(
Click to expand...
Click to collapse
Did you try the AS thing above?
First off what do you on the screen of your device when you turn it on? Is it in boot loader screen, a black screen with text that says boot loader mode and serial?
If it is in boot loader screen and it says serial on the bottom, when you plug in the USB do you see the "serial" text change to "USB"?
I had this problem with mine. I upgraded my Qtek9000 with the new orange ROM and when the process finished I was still in the boot loader screen and could not get out of it. I had to re-flash it back to the Original Qtek ROM which revived the devices. I then started the ROM upgrade process all over again which resulted in a successful flash.
If you can answers some of the questions above I can try to help.
BTW, the upgrade process takes about 20-25 minutes. if it was any less then that you unplugged the device to early.
Plug device in.
• Start ROM upgrade process.
• The device will turn off and go into boot loader mode (the computer will lose connection to the device and unrecognized USB devices error will appear in your task bar).
• Wait until the device reconnects to the computer and the ROM upgrade starts.
• This process will take 20-25 minutes.
• Reset the device with option 0 (erase all data)
• The device will boot normally and go through the extended ROM application installs. It will ask you to reset again.
• After the second reset you are done.
xda exec upgrade (dead phone)
tHIS ALSO HAPPENED TO ME (IT WAS PRETTY SCARY) . i DISCOVERED THAT I COULD GET IT LIVE BY PRESSING THE LIGHT BUTTON THE POWER BUTTON AND THEN SOFT RESET (THIS IS THAT BOOT MODE) .
THEN I RE-CONNECTED TO MY PC AND RE COMMENCED THE UPGRADE...WORKED FINE. I HAD ACTIVESYNC RUNNING WHEN I DID THE INTIAL UPGARDE, PROPBABLY THE PROBLEM!! :wink:
none of this worked....may be I am not doing it right
when I try to add hard-reset all I get this is this:
"press 0 to restore factory default"
"press X to exit"
When I run the rom update, I get device connection problem error message and sometimes the country id error message.
none of this worked....may be I am not doing it right
when I try to add hard-reset all I get this is this:
"press 0 to restore factory default"
"press X to exit"
When I run the rom update, I get device connection problem error message and sometimes the country id error message.
my yahoo and msn id is bmlsbr...please someone chat with me and provide some help. I feel helpless after spending all the money and the phone dead after i day of use.
please...........
here is what I am getting
I can not turn my device on at all.
I'm unclear to what you are saying. First you tell us that the device does not turn on. Then you say you are getting the 0 X option. Which one is it? If you are getting the O/X option what do you see on the screen when you press 0. Do you see the device in boot loader mode? You might have to remove the battery and try the reset button after. my experience has been when the device is in boot loader mode I cannot turn it off. It always stayed on. So you might want to charge it just to make sure you have full power. I would also use the ROM loader without the country and device ID restrictions you can download it from the FTP site.
QTEK 9000 DEAD
I was always able to get the hardware reset menu..but nothing happened beyond that.
Now the phone is working after multiple tries to put the rom. But active sync won't work. Any clues????
What do you mean by works? Did you load the ROM?
Have you tried to follow these instructions:
http://forum.xda-developers.com/viewtopic.php?t=43592
Seems to work for a few people.
Tried the 'g' hack to get recognised on wifi G only networks and now my wifi won't connect to anything.
Uninstalled the cab from add/remove programs, but I'm still stuffed.
Can anyone help with a suggestion or the original registry values for the wifi?
I originally did it via the hack compiled in cab form, then manually set the registry via the msmobiles site, then tried another suggestion - only joy I have is seeing but being unable to connect to any network.
Before it was 'fussy' anyhow, not wanting to connect to some networks and I was hoping to improve it's connectivity to include those set to G only.
Help...
Try hard resetting your phone, this should restore the original settings fully and it should work again.
Tried that, no difference. Also after hard reset (0) my boot loader splash screen is still the same (customised) and I am now unable to upgrade the rom it seems. Tried what I did before, only switching to the CE from my original O2 rom, and it examines device ok, disconnects it ok, restarts it when the device boots up and the rom upgrade utility sits at 'do not turn off' doing nothing....
Update, put device into boot loader mode, flasher now worked, re wrote the rom and setup again, now wifi works again. Long way round hey, even hard reset didn't work!
Soft, hard reset … everything I do I get the white screen!!!!
I can connect to my computer and activsync, bat that’s all …
Entering bootloader gets me to the same thing- white screen!!!!
help ...
Hi there
The first time that I have attempted to perform the upgrade to a cooked rom and everything has gone horribly wrong.
A reset (using the pin hole) gives a blank display. Nothing at all.
A hard reset (using pin hole and soft keys) gives the option to perform hard reset by pressing Yes. This then gives HTC logo screen and then system hangs after displaying
IPL 3.13.0001
SPL 1.11.0000
I can go into bootloader screen (pressing two side buttons) and can connect USB. When I try to install factory ROM or any cooked ROM it stops at 2% and gives me an error saying
Error 228 - Invalid File Size
Is there anything I can do to save my device?
Please help.
are you sure that you have the right factory rom?
must be the one that was on your device when you bought it!
had the same problem! flashing with original rom solved it!
Yes - this is the WM5 rom that I had orginally before upgrading to WM6.
Bricked P3300
try and remove the minisd card
that must be the cause
cheers
jayzd1
Bootloader is not just by pressing two buttons. Press both the buttons and make a soft-reset. When the tri-color screen appears, connect to USB and perform the ROM upgrade again. If it fails, perform the upgrade with a factory ROM. This will bring back your device to working condition.
Next time before flashing, make sure you have applied Hard SPL once.
Regards,
Carty..
Flashed my device with BuildOS software - everything went smoothly, but when I reset it at the end it became stuck on the boot screen (where it shows you your radio R 1.32.00 etc.).
Now I cannot sync and reflash it and the phone just gets stuck on this screen with hard & soft resets.
Any ideas?
BuildOS keeps giving me the Error101 No Connection message.
Are there any programs out there that will flash my internal memory and get this unstuck?