Tried the 'g' hack to get recognised on wifi G only networks and now my wifi won't connect to anything.
Uninstalled the cab from add/remove programs, but I'm still stuffed.
Can anyone help with a suggestion or the original registry values for the wifi?
I originally did it via the hack compiled in cab form, then manually set the registry via the msmobiles site, then tried another suggestion - only joy I have is seeing but being unable to connect to any network.
Before it was 'fussy' anyhow, not wanting to connect to some networks and I was hoping to improve it's connectivity to include those set to G only.
Help...
Try hard resetting your phone, this should restore the original settings fully and it should work again.
Tried that, no difference. Also after hard reset (0) my boot loader splash screen is still the same (customised) and I am now unable to upgrade the rom it seems. Tried what I did before, only switching to the CE from my original O2 rom, and it examines device ok, disconnects it ok, restarts it when the device boots up and the rom upgrade utility sits at 'do not turn off' doing nothing....
Update, put device into boot loader mode, flasher now worked, re wrote the rom and setup again, now wifi works again. Long way round hey, even hard reset didn't work!
Related
I am a rookie at upgrading this stuff. I have a QTEK 9000. I got UNI_QTEK_13077_176_10900_WWE_Ship.exe from the ftp site.
1) Did a device reset.
2) Connected via active sync.
3) ran the program.
After a short period, The device shut off and active sync disconnected.
The screen is black. On button does not work.
I tried a hard boot and I get the boot menu and 0 or x does not seem to do anything.
Did I do something wrong? What now.
GaryK2 said:
I am a rookie at upgrading this stuff. I have a QTEK 9000. I got UNI_QTEK_13077_176_10900_WWE_Ship.exe from the ftp site.
1) Did a device reset.
2) Connected via active sync.
3) ran the program.
After a short period, The device shut off and active sync disconnected.
The screen is black. On button does not work.
I tried a hard boot and I get the boot menu and 0 or x does not seem to do anything.
Did I do something wrong? What now.
Click to expand...
Click to collapse
I think that program is supposed to be run after you've removed USB from the connection methods in activesync - i.e. you're not connecting via activesync, even though the device is physically connected.
OK, I tried the process again without activesync.
That seems to be the answer. ROM Is now installed. I just have to finish up.
Thanks alot,
That scared the hell out of me.
GaryK2 said:
OK, I tried the process again without activesync.
That seems to be the answer. ROM Is now installed. I just have to finish up.
Thanks alot,
That scared the hell out of me.
Click to expand...
Click to collapse
Hehee... when you get the new rom on, you'll love it...
GaryK2 said:
OK, I tried the process again without activesync.
That seems to be the answer. ROM Is now installed. I just have to finish up.
Thanks alot,
That scared the hell out of me.
Click to expand...
Click to collapse
Sorry for my silly question but how can you process it without activesync, mean you have removed activesync form your conputer?, because my activesync is automatic running when the computer start up
Thanks,
Orangevn
orangevn said:
Sorry for my silly question but how can you process it without activesync, mean you have removed activesync form your conputer?, because my activesync is automatic running when the computer start up
Click to expand...
Click to collapse
You're just telling AS to ignore the Exec when it's connected. The PC itself still sees it and adds a driver on connection. So you're not removing AS from the PC as such.
i have same problem but it doesn't work
please help me....this phone is dead now:-(
Re: i have same problem but it doesn't work
bmlsbr said:
please help me....this phone is dead now:-(
Click to expand...
Click to collapse
Did you try the AS thing above?
First off what do you on the screen of your device when you turn it on? Is it in boot loader screen, a black screen with text that says boot loader mode and serial?
If it is in boot loader screen and it says serial on the bottom, when you plug in the USB do you see the "serial" text change to "USB"?
I had this problem with mine. I upgraded my Qtek9000 with the new orange ROM and when the process finished I was still in the boot loader screen and could not get out of it. I had to re-flash it back to the Original Qtek ROM which revived the devices. I then started the ROM upgrade process all over again which resulted in a successful flash.
If you can answers some of the questions above I can try to help.
BTW, the upgrade process takes about 20-25 minutes. if it was any less then that you unplugged the device to early.
Plug device in.
• Start ROM upgrade process.
• The device will turn off and go into boot loader mode (the computer will lose connection to the device and unrecognized USB devices error will appear in your task bar).
• Wait until the device reconnects to the computer and the ROM upgrade starts.
• This process will take 20-25 minutes.
• Reset the device with option 0 (erase all data)
• The device will boot normally and go through the extended ROM application installs. It will ask you to reset again.
• After the second reset you are done.
xda exec upgrade (dead phone)
tHIS ALSO HAPPENED TO ME (IT WAS PRETTY SCARY) . i DISCOVERED THAT I COULD GET IT LIVE BY PRESSING THE LIGHT BUTTON THE POWER BUTTON AND THEN SOFT RESET (THIS IS THAT BOOT MODE) .
THEN I RE-CONNECTED TO MY PC AND RE COMMENCED THE UPGRADE...WORKED FINE. I HAD ACTIVESYNC RUNNING WHEN I DID THE INTIAL UPGARDE, PROPBABLY THE PROBLEM!! :wink:
none of this worked....may be I am not doing it right
when I try to add hard-reset all I get this is this:
"press 0 to restore factory default"
"press X to exit"
When I run the rom update, I get device connection problem error message and sometimes the country id error message.
none of this worked....may be I am not doing it right
when I try to add hard-reset all I get this is this:
"press 0 to restore factory default"
"press X to exit"
When I run the rom update, I get device connection problem error message and sometimes the country id error message.
my yahoo and msn id is bmlsbr...please someone chat with me and provide some help. I feel helpless after spending all the money and the phone dead after i day of use.
please...........
here is what I am getting
I can not turn my device on at all.
I'm unclear to what you are saying. First you tell us that the device does not turn on. Then you say you are getting the 0 X option. Which one is it? If you are getting the O/X option what do you see on the screen when you press 0. Do you see the device in boot loader mode? You might have to remove the battery and try the reset button after. my experience has been when the device is in boot loader mode I cannot turn it off. It always stayed on. So you might want to charge it just to make sure you have full power. I would also use the ROM loader without the country and device ID restrictions you can download it from the FTP site.
QTEK 9000 DEAD
I was always able to get the hardware reset menu..but nothing happened beyond that.
Now the phone is working after multiple tries to put the rom. But active sync won't work. Any clues????
What do you mean by works? Did you load the ROM?
Have you tried to follow these instructions:
http://forum.xda-developers.com/viewtopic.php?t=43592
Seems to work for a few people.
Not sure if this was on the fault of my carrier or not, but I actually had this problem before and resolved it once.
I was running 3.60.1 and even tho I had Unchecked "Enable Advanced USB Connection" or whatever under USB to PC in the Connections Tab, My phone would not connect to WMDC (I use Windows Vista). I would just connect to get my contacts via Bluetooth, which worked fine.
I am a heavy user of tethering via USB as I like to charge the phone while I am connected. 3.60 series has been pretty good...I haven't had a complaint really since I upgraded from 3.0 (Which IMO is a bit more stable but I'm not sure why). Every once in awhile, I lose connection. I'm not sure why it does this. I'm using radio 1.48 and I have been using it for both 3.0 and 3.60. I had problems using 1.50 as data connections would drop instantly...so I never caught on to that radio. I am located near the NYC Metro area.
The latest problem I had was...sometimes my data connections would drop and would not reconnect without restarting the phone. I'd SR the phone and all of a sudden during the boot (while still connected to USB), my WMDC picks up the device. Not sure why it chooses to do it after I've had the ROM Flashed for several days now...but I go ahead and set it up only to see my phone assumes a permanent Flight Mode. Under Comm Manager, I am unable to switch back to Phone Mode. I do not have access to Phone settings. I cannot even open my dialer.
I've done it before and I don't save that many new things to my phone...so I went on to HR. After HR...the phone was completely unstable. During the loading of the "customizations" (which correct me if I'm wrong...is the EXTRom), it will install everything and then hang after finishing the last one which I believe was the theme of ATT.tsk.
Frustrated, I decided to flash back to 3.0 I still use 1.40Oli (HardSPL V6) which was always fine and I was never able to update to 2.10Oli for I have weird issues with SSPL and Vista. I do everything normally...I get to the progress screen. It hangs. No problem. Run RUUWrapper again...bootloader screen is accessible and my SPL and HTC_BOOT should be unaffected. Still hangs. I try to flash a radio...hangs. Almost everything I try to flash...hangs.
I've tried multiple USB Cables...thinking that was the problem...same problem though. It gets all the way to the progress and the Bootloader screen recognizes when its plugged to the USB so I don't think that's the problem.
My phone is stuck in bootloader right now and nothing will flash to it. No matter what it will get to progress and load 0% of any NBH I try to flash.
The main point of this post:
1. What caused 3.60.x to not connect to WMDC from the beginning via USB...only to do it randomly later?
2. What caused the corruption to the ROM leading me "GSM-less" stuck in Flight Mode and no access to anything to turn it back on to Phone Mode?
3. What is the cause of my phone not updating any NBHs I try to flash (OS Only/Radio Only/Original Shipped) ROMs?
I'm not sure if I was the only one receiving these errors. I have not updated my signature in awhile but I was running:
HARD-SPL V6: 1.40.Oli
Radio: 1.48.00
ROM: VP3G 3.60.1
Thanks for your help in advance.
I've searched but can't find the answer to this one - sorry if I've missed it somewhere. I have an unmolested T-Mobile UK MDA Vario 2 and I'm trying to install the official TM UK WM6 upgrade ROM.
On my desktop PC (which is properly paired to the phone through ActiveSync to sync with Outlook etc) running the exe results in a grey box with red text saying "Checking files on your PC" forever unless I unplug the phone. Then it will eventually launch the wizard. If I plug the phone in again and wait until it's synced and "Connected", the wizard will go all the way through to checking the existing version and starting the upgrade. However, when the upgrade starts the progress bar stays at 0% and the phone turns off!! Eventually it times out with a 260 error, and no changes have been made to the phone. The PC is running XP, but the only fixes I've seen for the 260 error are if you're running Vista?
I've also tried on my XP laptop - this isn't paired, so the connection through Activesync is just as Guest. The update still does the strange thing with the "Checking files on your PC" box if the phone's plugged in, but unlike the desktop PC the RUU won't talk to the phone at all - connection error before it can even verify the existing ROM version.
Can anyone help? I've been waiting for months to get WM6!
Cheers,
Tim
Phone just turns off?
OK, so now I've done a hard reset on the phone, paired it up to my XP laptop and told it not to sync anything. Now I get to the same stage as I do on the desktop - i.e. the phone switches itself off when the upgrade begins (at 0%), then the RUU times out with an error 260!
One odd thing I noticed is that if I plug the phone in with "Advanced network functionality" enabled (which it is by default) the PC tries to connect it as a new 10mb network card!? However, the RUU does the same thing whether this is enabled or not.
Getting desparate for help now - I've tried 2 different machines and even cleared the phone completely, what more can I do?
Cheers,
Tim
Try flashing from an sdcard. There are quite a post on it here, if you do a quick search you should be able to find the information and hopefully get your device upgraded.
It might be worth installig spl V7 from here before hand just in case anything goes wrong.
http://forum.xda-developers.com/showthread.php?t=296722
Working!
Thanks for the reply. Finally got it flashed using the instructions from here:
http://forums.cingular.com/cng/boar...thread.id=42389&view=by_date_ascending&page=1
Basically, you have to:
- Connect using Activesync and let it finish syncing.
- Start RUU.
- Activesync will close - ignore it and carry on.
- Eventually the phone will go into debug mode.
- Continue through the wizard - it won't be able to identify the existing rom version but this seems to be normal.
- Let it finish!
I was fiddling when Activesync closed - strangely, by disconnecting, restarting AS and reconnecting the wizard carried on and even identified the existing rom properly! It seems that it needs AS to connect to the phone initially, then it closes AS but keeps the USB connection open for the update.
Hope that helps anyone else with the same problem.
Cheers,
Tim
Hi All, I've encountered "Not able to Activesyn" + unable to recognize my Diamond camera after I upgraded my Diamond with "EnergyROM 1.0 Diamond 52109 Phoenix Standard LZX". No matter how much i've tried to reinstall the Microsoft Activesyn 4.5, it doesn't work. That's why i could not downgrade my device back to the previous ROM version. Anyone's suggestion for any other ways to downgrade my Diamond's ROM without relying on Microsoft Activesy/window mobile center?
Please Help
Did you make sure that Start -> Settings -> System -> USB Settings -> Enable faster data syncronization
is unchecked.
you can flash any rom using the internal storage mode.
for more information go to:
http://wiki.xda-developers.com/index.php?pagename=Diamond_FlashfIS
Yes I did, but still not working. Thanks anyway for the suggestion.
Yes I did, but still not working. Thanks anyway for the suggestion.
im sure you've already done this and it may come across as silly to ask but have you tried a hard reset yet??
I've had this happen once before with a ROM i flashed about 8 months ago now. I did a hard reset and then on the bootup, i cancelled the configuration where it installs the custom apps. This worked for me, might be worth trying.
during flashing the ROM, after i pressed the power button the process remained not progressing at about 20%. It has kept me waiting for more than 40 minutes so far. I'm still waiting.
Thanks for the comment
take the battery out and put it back in, then turn it on again and see what happens. you may also want to try getting into bootloader then see if you can get it to show usb when connected to your pc.
Holding down on Volume down/Reset should enter bootloader.
It work now. I put my Diamond to "USB Trigger Mode" then I pressed the active button. After that i run the ROM file from my PC via the USB cable. Finally my diamond was downgraded.
Thanks you all for your kind help
Hello! I used to own an SGH-T989, it was rooted and I messed around with some core files it seems, via deleting "unwanted" applications. Anyway, I reset it to factory defaults, it soft bricks. I use the tutorial to unbrick, and phone starts up. It can be used to call, and it mostly works (though I no longer possess it, so there's probably more errors around), but a core feature my uncle needed was the ability to give internet to a pc via usb. We get an error when we attempt to enable this, it reads:
"Mobile data is not available, or invalid SIM".
Neither of these are true, since we've tried it on other phones. After that, I've attempted to install mods to see if the problem is fixed. Cyanogenmod installs ok, but can't even make calls now.
What should I do? Thank you for your time.