Soft, hard reset … everything I do I get the white screen!!!!
I can connect to my computer and activsync, bat that’s all …
Entering bootloader gets me to the same thing- white screen!!!!
help ...
Related
HELP! my blue angel is eather blocked or really dead.
last time it worked i did a hard reset, the funny thing is he keeps all the tasks after the hard reset (?) and after 2 minuuts when the boot has been completed it freezes. nothing works anymore, no button,no screen, no nothing responds. even the start button from windows has been replaced by the word phone in the frozen screen. Not even active sync can make a connection...
anyone ??? any suggestions???
have you tried Re-Flashing with 1) a new rom or 2) the original rom
how will he reflash the device, if he can't sync it? Contact your dealer, otherwise, i'm buying the digitizer...if nothing can be made to save your device.
you dont need to sync to flash the device!
put the blue angel in boot loader mode and the display will say 'serial' and a number. connect to PC with the docking cable and it will then say 'USB' and is then reday to flash!!
do a search on 'flashing a new rom to blue angel' or similar search and it is all there!!!!!
got it fixed
thnx 4 all the tips. butr got the problem solved.
I guys, I've tried upgrading my JasJar with Xda_Exec_Upgrade_v1.30.162, using MaUpgradeUt_noID and when update was complete I cannot load my JasJar anymore. I am using hard reset, but when choosing "0" off the boot screen - noting happens and screeen remains black.
Can someone please help me with this issue?
Thanks a lot in advance,
Best regards,
Stazik
Try reflashing it again. If it does not work, try reflashing back to the i-Mate ROM.
Whats the version of your bootloader (the screen with serial at the top changing to usb when plugged into usb)? If it is 0.56 or something else below 0.6 thats an already known problem.
I had similar problems with my O2 upgrade.
Try:
- Turn off USB in ActiveSync
- Hold Power/Light and press reset button
- Run the upgrade again
Thank you very much for help and support, guys!
When I try flashing my JasJar with Bootloader update or JASJAR_WWE_13076_164_10900_wwe_ship I get the same error message: Error 101 Connection Error. And also when I disable ActiveSync USB and plug my Jasjar into USB - I get a message from windows saying the device was not recognized...
The only I can get from JasJar is a black screen, except when I press two soft buttons and reset - that gives me a screen with 0 and x to choose. Neither of choices helps thou.
Any help is appreciated. Thanks a lot.
you didnt answer the question re the boot loader number.
when your screen is grey or starting to reset, there are numbers on the screen. what are they.
if it is less that 0.6 your in trouble and assistance is different to if your boot loader is 1.0 or similar.
My screen doesn't change from gray except when I do hard reset. And then I hit two buttons and reset, then press 0 the message Clearing now appears and then everything returns to gray again.
How can I tell the version of bootloader in this case?
Thank you in advance!
they are hard to see, if the screen is grey, the numbers are black.
f the screen is blue/coloured, the nmbers are probably red.
Thanks for help guys,
I brought my JasJar for service today, somehow they were able to put older ROM in there. Now I've upgraded bootloader, hopefully newest ROM from i-mate going to fit without problems )
Well I've killed my Jasjar upgrading I was installing the bootloader update. It sat there saying "Checking information on your device" for about 30 minutes after the update started (notes said it would take 10 so I figured something was amiss - disconnected & rebooted my PC.
Now when I turn the Jasjar on I get the USB/Serial screen referred to above and (good news I figure) it has v1.00 at the bottom. How do I fix this?
TIA
Sheesh. I did a search (I know I should have done that first) and found the answer here
Took a while to find a copy of mtty to download, but found that at http://buzzdev.net
Once I'd done the Set 14 0 and tried the boot loader update again it took seconds so something definitely went wrong the first time.
Tried to upload the software on my MDA Pro and all of a sudden the screen on the MDA goes blank. I've tried master reset and i press 0 and it says clearing or whatever. Then it goes to the USB/Serial Screen and it reads v1.01 at the bottom. What do I do?
Hi, could you please post some more details? e.g. Which version was originally on the Universal and which version did you flash....
Cheers
Michael
Hi,
You just need to run the Upgrade again. As long as it says USB when you have it connected, no harm is done.
Cheers,
vma
No...There is definately some damage done. Its stuck on the boot load screen Where it says Serial at the top and V1.01 on the bottom. I just got it new in the box untouched and totally screwed it up trying to update the software to "UNI_TMUK_130114_130232_11003_WWE_BL101_Ship" I dont know what the original rom software was at all. It went to the grey screen that it is stuck on now and the power nor reset button works. The letters are still there in black on a grey non lit screen. Master reset (soft keys+rest) brings me to the screen but after i press 0 it says clearing now but goes right back to the serial/v# screen(boot load mode)....thats it...
Look it's not damaged. It boots to the bootloader. So long as it has the bootloader it's COMPLETELY recoverable.
1st thing you need to do is look here.
Scroll to the bottom and use method 2... It's a LOT easier and has saved my bacon many times!.
Psi
Flashed my device with BuildOS software - everything went smoothly, but when I reset it at the end it became stuck on the boot screen (where it shows you your radio R 1.32.00 etc.).
Now I cannot sync and reflash it and the phone just gets stuck on this screen with hard & soft resets.
Any ideas?
BuildOS keeps giving me the Error101 No Connection message.
Are there any programs out there that will flash my internal memory and get this unstuck?
I have a problem with my Tmobile MDAIII compact.
It dropped on the floor last week, the battery fell out and everything.. and after that it just hangs in the windows bootscreen.
Opened it up to see if there was any visible damage inside, but found nothing.
When I turn it on the screen shows:
IPL 1.12.0001
SPL 1.11.0001
GSM 03.21.90
OS 3.7.0.0
then it gos to the windows mobile splah/bootscreen
I have the PDAviet black and blue v4.0 touch ROM on it..
sof reset doesn;t work, it will just get stuck in the bootscreen again. if you touch a button it lights up the screen and keyboard, but even that stops responding afer a couple of minutes.
a hard reset is not an option right now cause I can't afford to lose my contacts and notes
flashing is not an option for the same reason.
had anyone here got any idea how to get this working again without a hard reset or a new flash..
I read that you can do more harm then good if you just use some commands you find, cause every bootloader has different commands so I carefully tried some MTTY commands in the bootloader, but in the end it didn't do anything. good or bad..
Is there a way to see where it hangs or gets stuck through some output console with MTTY or something? or get the contactlist out of it or the notes..
I SO cannot afford to lose my contacts or the notes in the damned thing. ( yes, I all hear you say " you should've backed up then!!" but hindsight is always 20-20 )
is it bootLOOPING or is it just hanging on the bootscreen?
if it's bootlooping try removing your SD card and then soft resetting
if it's hanging, your guess is as good as mine
It's hanging in that bootscreen/PDAVIET splash, it's not looping.. it just sits there mocking me..
There is no SD card present and no SIM either and if I insert those, it doesn't change a thing about its behaviour, it still hangs..
124 views and no one knows anything? no small clue, no tip, no nothing?
I think it's just broken.
The only option you can try I see is a hard reset. To bad you haven't made a backup or something on your computer. Lesson for the next time, if you contacts and notes are that important, Make a daily backup!!!