I had the need yesterday to do some text copying from one email to another and could not find anyway to copy/paste from the slide out keyboard.
I had to resort to using the WM keyboard layout to actually get the CTRL key to do the copy and paste.
Is there a way to do this from the slideout keyboard or even from the HTC QWERTY keyboard?
You can use the screen to do a copy/paste. Hold your finger or stylus on the screen and a menu pops up with make selection. It stops the screen from scrolling so you can highlight text. Not sure about and keyboard tricks.
Use the software from http://forum.xda-developers.com/showthread.php?t=554240.
Map Func C to emulate Ctrl C, Func X to emulate Ctrl X, Func V to emulate Ctrl V, and Func A to emulate Ctrl A. Works great.
Great!
Both options are perfect! Thanks guys!
Related
I ask this again, as my question was embedded in my other posts :
How do you get dead cycling to work ? On my TyTN, when writing an email for example, if I type "e" then "Fn" + "Space" it used to role through the "special caracters", "e"->"é"->"è"->"ê".
Looking at the "eT9DeadKeys.txt" file it looks like this should also work on TP2. What's the key combinbation to make it work ?
Format:
// c0, c1, c2, c3,..ck, where
// characters on the first column (c0), trigger the dead-cycling
// (c1,...,c3,c1..) when Symb + [first column character] on SP,
// or Fn + Space (PPC) and the current character macthes character
// on the first column.
Thanks
Harvey
Does this no longer exist on TP2 ? It worked on TyTN. Does anyone know how to make it work on TP2.
Thanks for help, I find this feature really useful, it would be a shame to have lost it.
Harvey
Not sure if it works as I haven't got one yet... but I read that if you pressed and held a key the alternates for that letter would show up (i.e. the accented variants).
give it a try,
wait, here's the bit from the manual:
To enter accented characters
1. Tap and hold a key with accent options (for example, vowels) to display the accented characters bar.
2. Slide your finger left or right on the screen to select the accented character you want to enter.
3. When you have selected the character, release your finger to enter it.
Tip You can also use the Numeric and Symbol mode to enter accented characters.
For more information, see “Using Numeric and Symbol Mode” in this chapter for details.
Thanks, but that is not exactly it... what you describe is on the virtual keyboard, and it works fine (tap and hold then move your thumb onto the one you want and finally realse).
Unfortunatly, this doesn't work on the physical keyboard. If you hold key pressed, it simply repeats it.
Surely some one can say whether this has simply been lost between TyTN and TP2.
Does no one use this feature on TyTN ? I found it great, just type the caracter you want then "Fn"+"Space" to get all the "accent" versions. It alos worked for "(" -> "[" -> "{", and other similar, virtually, you could get any symbol without ever using the symbol pad.
Has any one else noticed this has gone missing between TyTN and TP2 ???
Harvey
it only allows you to select one at a time. anyone know how to do multiple files?
I think if you open up the on screen keyboard, you can hit the ctrl key and select multiple files.
what about the tilt 2? there's no control key.
Set the on screen keyboard to "compact keyboard" I believe. One of the keyboard types on the "on screen" keyboard has a ctrl key.
I've been selecting the first thing then Shift+down arrow on the keyboard to select multiples. Will have to try the compact on screen keyboard.
thanks, do you know how i can multi select in inbox? so i can delete more than 1 email?
I have the keyboard configurator installed and a GSM model TP2, so I have a Control key already on the keyboard.
I'm just wondering if there is a way to map the combination of the Ctrl key with another, let's say if I wanted to map Ctrl + 4 = Close Window.
Thanks in advance!
rorytmeadows said:
I have the keyboard configurator installed and a GSM model TP2, so I have a Control key already on the keyboard.
I'm just wondering if there is a way to map the combination of the Ctrl key with another, let's say if I wanted to map Ctrl + 4 = Close Window.
Thanks in advance!
Click to expand...
Click to collapse
No, there is not an easy way to do that, but there IS an easy way to map the Function/Alt key with another.
When you select 'add key' in the keyboard configurator check the box that says "combine with Function key". There you go, I hope that helps!
Hi guys
Any idea how i can do a cut, copy and paste function during editing of my contacts info? I tried to tap and hold on the selected text but no cut, copy and paste function is made available to me. Or is there any available freeware that will allow me to do this?
It's quite difficult not knowing or having this function for shifting the text between the fields as i need to re-type them out each time.
Thanks in advance for the assistance.
That's easy... ctrl+c, ctrl+v, ctrl+x. There is a reason that I LOVE my TP2 for having a Ctrl key, I use it all of the times. Contacts and Google Maps are two areas where the right click menu doesn't appear, and the keystroke shortcuts come in quite handy!
Jason
if you have a tilt 2, theres no copy and paste on the keyboard, i still havent figured out a way to map it to FN+C or FN+X or FN+V, but i just use swype onscreen keyboard to do it =X
You may could use "VitoCopyPaste.exe" to Cut, Copy and Paste. Just Google around. I also had it on my phone once.
You can use Keyboard Controller (link below) to remap many different keys. Since the Tilt2 doesn't have a control key, I suggest remapping the FN key+C for copy and FN+V for paste. You can allow keys to directly open programs and lots more - GREAT program. I can vouch for it working very well with the Tilt2.
http://forum.xda-developers.com/showthread.php?t=554240
Enjoy!
theres no function for copy and paste on the keyboard controller, or else i would have done that already, unless someone has a solution that i dont know about
Yeah why i didn't think of that - Ctrl + X, Ctrl + C, Ctrl + V
Thanks all for the help.
Cheers!
Jon
anyone have any idea to do this for the tilt2?
if you don't have the ctrl button, the "HTC People" contacts manager seems to have left out the popup cut/copy/paste menu on tap and hold of selected text.
but if you go to the windows contacts manager, the cut/copy/paste does come up. just either go to "More" within the HTC manager, or just start up contacts manually through the program list.
i actually prefer the windows contacts manager and have disabled the HTC tab.
xredjokerx said:
theres no function for copy and paste on the keyboard controller, or else i would have done that already, unless someone has a solution that i dont know about
Click to expand...
Click to collapse
Pick a key you are unlikely to want and map it is the Ctrl key then you can use ctrl x ctrl c and ctrl v
barbo said:
You can use Keyboard Controller (link below) to remap many different keys. Since the Tilt2 doesn't have a control key, I suggest remapping the FN key+C for copy and FN+V for paste. You can allow keys to directly open programs and lots more - GREAT program. I can vouch for it working very well with the Tilt2.
http://forum.xda-developers.com/showthread.php?t=554240
Enjoy!
Click to expand...
Click to collapse
xredjokerx said:
theres no function for copy and paste on the keyboard controller, or else i would have done that already, unless someone has a solution that i dont know about
Click to expand...
Click to collapse
xredjokerx said:
anyone have any idea to do this for the tilt2?
Click to expand...
Click to collapse
Touch_Pete said:
Pick a key you are unlikely to want and map it is the Ctrl key then you can use ctrl x ctrl c and ctrl v
Click to expand...
Click to collapse
I use the Keyboard Controller on a Tilt 2 and have FN + C mapped to Ctrl -c (specifically, emulate key press, key 67 [C key], with the Ctrl box checked, send to OS). I have done similar with FN + X, & FN + V. Works great as copy, cut, & paste everywhere I have tried it.
I cant select ( highlight ) text from windows live messenger..
Also its very annoying to tap on the screen, and than select: select text, to be able to highlight and copy something.. is there anything i can do, to use it like htc kaiser... being able to select the text immediately ? without all those steps?
adoute said:
I use the Keyboard Controller on a Tilt 2 and have FN + C mapped to Ctrl -c (specifically, emulate key press, key 67 [C key], with the Ctrl box checked, send to OS). I have done similar with FN + X, & FN + V. Works great as copy, cut, & paste everywhere I have tried it.
Click to expand...
Click to collapse
This works for me, I have been doing this since I got my Tilt2.
I have Z,X,C,V,A mapped. Very useful.
ctrl key functionality w/o need for ctrl (or Fn) key
I have found that the keyboard controller program also allows you to do this without having to use Fn (or any other two key sequence). What you can do is assign a long key press for C, X, V to serve as copy, cut, paste by emulating CTRL-C, CTRL-X, CTRL-V, while assigning the short key press (click) to retain the default key functions (i.e., c, x, v).
Of course, you can expand on this. I applied this method to create a Fn-key-free keypad. For number 1, a single click is still an apostrophe, but long press is number 1. While the built-in option to double-click Fn is definitely more efficient when you have lots of numbers to enter, my sense is that a long key press is more convenient when you have just a few numbers to input.
And, this method also works for undo (i.e., control Z on your computer can be long press z on your tilt 2). Which is a beautiful thing.
It's really truly able to have a multi-touch keyboard on a resistive screen WinMo!!
it may takes some time.but then how many people would still use Windows Phone classic(except HD2)?!
MulkeyTouch = MultiTouch Key(board)
for more introduces pls read the following Notice.
Requirements
WVGA/VGA resolution[actually the technology works for all resistive screen-devices]
.NET CF 3.5 or higher
How it comes true?
read my first thread:
Multi 2.0 - Show and Explain Dual-Touch Technology On Resistive Screens
Here're some pictures(I've tried making a demo video.but it doesn't seem good.these are the shots of the video)
It's a WP7-style keyboard.It hasn't been finished.it can be used to input letters only..no numbers or symbols but "." and ","
[I used a stylus just to let you see more clearly.]And it proves that the screen is resistive.(It's TP2)
Notice
multi-touch keyboard
= dual-touch keyboard
= you can hold Shift key and press any letters' key at the same time to input capital letters
but you can't press two letters' key at the same time.it doesn't makes sense.
as my limited ability,i'm not able to write a real keyboard (in Native code.)
this is an 'app-in' keyboard..
(the keyboard have to run in the app.you can't use it to input texts to any other textboxes outside the app.)
But it shows the capability of having a multi-touch keyboard on resistive screen.
and of course it can be developed as a real system keyboard.
it doesn't work very well.the second key it detects may not the key you press especially when the key is far from the Shift key(such as P,O,I,L,K)..
but it's possible to add a function to modify the position values so that it can detect properly.
so i make another app called Modifine.(means to "modify" something to make it "fine")
but the modified result doesn't seem very good yet-.-!!...
Much better now..
Download
The NEW file MulKeyTouch 1.0 - (W)VGA.7z works for WVGA and VGA resolutions!
It has only one .exe file.but you'd better extract it to any one directory before run it.
cuz it'll create an Modifine.txt file on the directory to enable Modifine mod.
Please read the next post about how to use.
How to use it.
There are 4 ways to input captial letters:
[Normal way]Input 1 captial letters.Just press the "Shift" key then click any letter's key.
[Normal way]Input ≥1 captial letters.Click the "Shift" key twice then you can keep inputing captial letters
[Quick way]Input 1 captial letters.Hold the "Shift" key then move to any letter's key.It's a better way to input letters that near the "Shift" key such as "Z","A","Q","X",etc.
[Quick dual-touch way]Input ≥1 captial letters.Hold the "Shift" key and press any letter's key.
About Modifine
Does the second key it detects is not the key you are pressing on?
In particular the keys far from Shift key such as "P","O","L"
Then you may have to modify the position it gets.
Different screen may has its own dual-touch ability.
So you'll have modified values set by yourself.
1.Click "Modifine" button.
2.Click "Start Modifine!" button.
3.Hold the central of the "Shift" key.
4.Immediately draw follow the green line from lower left corner to top right corner.
5.Click "Back" button.
6.Enable the Modifine mode by click the "Smile" key(it's on the lower left corner of MKT keyboard.NOT the "Modifine" form's keyboard.)
7.Test it by input captial letters in the [Quick dual-touch way]
A much better way to see where the modified position go:
Check the "Show touch points" checkbox on Modifine form.
You can see two points while you input captial letters that are near the top right corner.
Red Point - original detected touch point
Green Point - modified point
I know there's a bug that the new points come but old points were not cleared.as i think you can find out the latest points.and for better running speed.i'm not going to fix it now.
PS.the app's icon(in 32x32 size) writes "没课逃~" which means "No classes to be skipped" in Chinese.
and Chinese pinyin of the three characters is "Mei Ke Tao",whose shortened (is MKT) is the same as MulKeyTouch's.
I use it to commemorate my dropping out of school~
Sorry for my poor English.
looks promising. keep up the good work
Woah! this is Awesome.. but i use Android on my HD2...whatever..
YOU GET A COOKIE! (Thanks)
Dude keep up the Awesome work..
now thank me for thanking your a** x'P
nice one bro, keep it up!
plz release for qvga.
thanks!
I believe many members will stay on WM for a while
Thanks!
It seems that you like WP7 keyboard
Gorgeous work. I'll look on it right away!
So, unfortunately, I cannot test the keyboard properly because I'm running VGA device (Diamond) and the textbox overlays the keyboard from the top. Maybe you can set Anchor property to TextBox? or there maybe is another way to change the textbox size dynamically?
otherwise it looks neat
If you need any help in implement the Multitouch for the HD2, write me a message
PaulosCZ said:
So, unfortunately, I cannot test the keyboard properly because I'm running VGA device (Diamond) and the textbox overlays the keyboard from the top. Maybe you can set Anchor property to TextBox? or there maybe is another way to change the textbox size dynamically?
Click to expand...
Click to collapse
thx for ur feedback!
MulKeyTouch 1.0 - (W)VGA.7z is released.it works for WVGA and VGA resolutions.
deepv84 said:
plz release for qvga.
Click to expand...
Click to collapse
sorry.may not..
thx all~
支持中国朋友~呵呵~非常感谢~