imate jama failed after rom? - Upgrading, Modifying and Unlocking

i have a jama which was on wm5 i update it with jama_8050_wwe_rus rom
with the memory card method after complete rom its give me language selection but when i select it its not change with front buttons how ever i remove out the battery and put it back after that its hang on error
(work station failed) now plz any one help me how i recover it again

upgrade ur phone with this rom
http://forum.xda-developers.com/showthread.php?t=574627

michaelsaad said:
upgrade ur phone with this rom
http://forum.xda-developers.com/showthread.php?t=574627
Click to expand...
Click to collapse
@micheal i do it with very care fully but after that i got the error
(download workstation
check the package
preparing to install pack age
package update starts failed to update package
failed to download process)
now how can i recover it
thanx in advance

michaelsaad said:
upgrade ur phone with this rom
http://forum.xda-developers.com/showthread.php?t=574627
Click to expand...
Click to collapse
do u have any solution plz i need urgently

X-TRA said:
do u have any solution plz i need urgently
Click to expand...
Click to collapse
if u don't know how to use dnw to upgrade ur phone do the following:
get 1gb memory card and format it fat16(if ur card is 2gb resize it to 1gb_
put the bootloader and rom on it and restart the phone
it will start upgrading automatic

Related

Downgrading wallaby

hello there
i got an Qtek 1010 locked ..
that i wanted to flash using SD card ... i failed using XDAtools as a message poped up saying that the nbf file size is larger than required (32mb)
. i tried down grading using :
'pnewbootloader bootloader_v5_15.nb0'
but the following message appeared
"Unable to find flash info offset, cannot disable bootloader writeprotect"
wHAT SHOULD I DO .... PLEASE :roll:
any help would be appreciated
many thanks
letoubib said:
that i wanted to flash using SD card ... i failed using XDAtools as a message poped up saying that the nbf file size is larger than required (32mb)
Click to expand...
Click to collapse
If you're trying to flash WM2003SE, than it's impossible to flash via SD....
If you're trying to flash any other ROM, than the ROM-File is corrupt......
letoubib said:
'pnewbootloader bootloader_v5_15.nb0'
but the following message appeared
"Unable to find flash info offset, cannot disable bootloader writeprotect"
Click to expand...
Click to collapse
downgrading bootloader does not change anything at the XDATools error message....
You can try flashing via SD card without downgrading bootloader. This is not required for all cases.
Stefan
i did it
thank you so much Stefan
... i succeded ....... you r GREAT for your outstanding website ...

[ROM][WWE]HTC_WWE_2.03.405.2_Radio_Signed_Diamond_52.51.25.2 6_1.09.25.23

Mirror for this version.
http://rapidshare.com/files/1848450...igned_Diamond_52.51.25.26_1.09.25.23_Ship.exe
What changes had been made in version 2.03?
Is it safe enough to use
can i ask u were u getting all these from ?
tabarda said:
Mirror for this version.
http://rapidshare.com/files/1848450...igned_Diamond_52.51.25.26_1.09.25.23_Ship.exe
Click to expand...
Click to collapse
Hey Tuga Men.
Did you test it?
pacharru said:
Hey Tuga Men.
Did you test it?
Click to expand...
Click to collapse
Hi friend,
No, install the English version 2:03
http://forum.xda-developers.com/showthread.php?t=471699
tabarda said:
Mirror for this version.
http://rapidshare.com/files/1848450...igned_Diamond_52.51.25.26_1.09.25.23_Ship.exe
Click to expand...
Click to collapse
I try to install this version, flash go to 100%, and write: error 270, image file corrupted. The PDA screen wait it bootloader mode to retry flashing.
I have 1.93 Olinex SPL, this is problem?
Where can i find the latest working English or Europian 2.03 version?
misa_reg said:
I try to install this version, flash go to 100%, and write: error 270, image file corrupted. The PDA screen wait it bootloader mode to retry flashing.
I have 1.93 Olinex SPL, this is problem?
Where can i find the latest working English or Europian 2.03 version?
Click to expand...
Click to collapse
the same to me
misa_reg said:
I try to install this version, flash go to 100%, and write: error 270, image file corrupted. The PDA screen wait it bootloader mode to retry flashing.
I have 1.93 Olinex SPL, this is problem?
Where can i find the latest working English or Europian 2.03 version?
Click to expand...
Click to collapse
You already have it.
There is a problem installing these ROMs via an Activesync connection. You need to flash from Internal Storage. Also, make sure you have HardSPL installed before you flash.
Instructions for flashing from internal storage:
Extract the RUU_Diamond_HTC_Europe_2.03.401.2_Radio_Signed_Dia mond_52.51.25.26_1.09.25.23_Ship.exe file to a new directory on your PC
Find the RUU_signed.nbh file in this new directory and rename it to Diamimg.nbh
Copy Diamimg.nbh to the root of Internal Storage
Hold in the volume down button + the back button (thats the top right button on the front to the right of the big middle jog control) + soft reset
Follow instructions on screen
When the process is complete (it will say UPDATE SUCCESS) then reset
Thank You! Great! Updated succesfull, but this is new update method for me!
What is the differend betwen 2.03.401.2 and 2.03.456.2 ?
Any other mirrors available?
misa_reg said:
Thank You! Great! Updated succesfull, but this is new update method for me!
What is the differend betwen 2.03.401.2 and 2.03.456.2 ?
Click to expand...
Click to collapse
Yes, same question. I already installed "RUU_Diamond_HTC_WWE-ME_2.03.456.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship". what is the different? thank you.
pdaman said:
Yes, same question. I already installed "RUU_Diamond_HTC_WWE-ME_2.03.456.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship". what is the different? thank you.
Click to expand...
Click to collapse
Only the numbers are different and xt9, propebly support ME language, nothing else
Megaupload
http://www.megaupload.com/?d=WTS8UQKB
I try to install this version, flash go to 100%, and write: error 270, image file corrupted. The PDA screen wait it bootloader mode to retry flashing.
I have 1.40 Olinex SPL i carnt sync with computer and carnt get out of try colour screen so i dont think i can update from phone ive tryed to flash a cooked rom still get same message please help what should i do thanks
Same here, do have HARD-SPL on it, tried several times. But now I cannot seem to soft or hard-reset....so cannot try to install it from the interal storage as well....is it bricked now?
buff said:
I try to install this version, flash go to 100%, and write: error 270, image file corrupted. The PDA screen wait it bootloader mode to retry flashing.
I have 1.40 Olinex SPL i carnt sync with computer and carnt get out of try colour screen so i dont think i can update from phone ive tryed to flash a cooked rom still get same message please help what should i do thanks
Click to expand...
Click to collapse
Flash with HardSPL 1.34,and hard reset.
sorry but keep trying but all i get is file error 240 file open have you got any ideas on what or how to do it thanks
hello!
can someone tell me how to extract the .nbh file from the exe file, or even upload it somewhere. i'm not able to flash this rom to my diamond(same error with corrupted file). i have hspl 1,93.
tzacanel said:
hello!
can someone tell me how to extract the .nbh file from the exe file, or even upload it somewhere. i'm not able to flash this rom to my diamond(same error with corrupted file). i have hspl 1,93.
Click to expand...
Click to collapse
Uuse winRAR to open the exe file and extract the contents to a folder which will contain NBH file

Please help ROM Update corrupted

Hello,
I try to update my Excalibur with RUU_EXCA_3VOLUTION_WM65_3VO.3.00.112509 rom, but the communication between my laptop and my phone got lost. Now I only can boot my phone in bootloader.
I try to load the same rom, and I download the original rom, but I obtain the following errors:
The file is corrupted
INVALID VENDER ID
Some one can help me please
run auto and follow instruction but if you flash your phone under windows vista or win7 Rom update process may be corrupted. I had same problem with win7 and vista , I can flash my rom under windowsxp now .
lenoxcr said:
Hello,
I try to update my Excalibur with RUU_EXCA_3VOLUTION_WM65_3VO.3.00.112509 rom, but the communication between my laptop and my phone got lost. Now I only can boot my phone in bootloader.
I try to load the same rom, and I download the original rom, but I obtain the following errors:
The file is corrupted
INVALID VENDER ID
Some one can help me please
Click to expand...
Click to collapse
Follow the instructions here: http://forum.xda-developers.com/showthread.php?t=540492 . Hope that helps
error 270
RUU_EXCA_3VOLUTION_WM65_3VO.3.00.112509 is error 270
goer's d ignasia said:
RUU_EXCA_3VOLUTION_WM65_3VO.3.00.112509 is error 270
Click to expand...
Click to collapse
Take your time to read the sticky & use the search.... It's a question that get asks so many times and answered so many too...

[Q] bricked my huawei ascend mate plzz HELP!!!

Hi could someone plz tell me how to unbrick my huawei ascend mate as i bricked it while installing a new custom rom and i dont have cwm or twrp so plz could someone tell me how to solve the problem? I really need HELP!!!!
hamzafoad said:
Hi could someone plz tell me how to unbrick my huawei ascend mate as i bricked it while installing a new custom rom and i dont have cwm or twrp so plz could someone tell me how to solve the problem? I really need HELP!!!!
Click to expand...
Click to collapse
details pls. soft brick, hard brick? does it start or just blackscreen, etc
wulfy1000 said:
details pls. soft brick, hard brick? does it start or just blackscreen, etc
Click to expand...
Click to collapse
Sorry for not adding that it is a hard brick as my phone is stuck on the logo and it does go into the normal recovery mode but i dont have cwm recoveryand when i turn it of it keeps on coming back to the logo by itself.
hamzafoad said:
Sorry for not adding that it is a hard brick as my phone is stuck on the logo and it does go into the normal recovery mode but i dont have cwm recoveryand when i turn it of it keeps on coming back to the logo by itself.
Click to expand...
Click to collapse
that is softbricked.update app on card and start phone with vol up+vol down
wulfy1000 said:
that is softbricked.update app on card and start phone with vol up+vol down
thanx for replying ok well i tried that it reads the update.app file but it then says instalation aborted and then it is written FAIL in the end.
Click to expand...
Click to collapse
hamzafoad said:
wulfy1000 said:
that is softbricked.update app on card and start phone with vol up+vol down
thanx for replying ok well i tried that it reads the update.app file but it then says instalation aborted and then it is written FAIL in the end.
Click to expand...
Click to collapse
download http://consumer.huawei.com/en/mobile-phones/support/downloads/detail/mt1-u06-en.htm?id=17790
then unrar. then u will see a folder "dload"
copy it on your external sdcard (with a pc)
preferably the sdcard must be empty and formated before
make sure the phone is of. insert sd card.
then pres power+vol up+vol down
it should work
Click to expand...
Click to collapse
wulfy1000 said:
hamzafoad said:
download http://consumer.huawei.com/en/mobile-phones/support/downloads/detail/mt1-u06-en.htm?id=17790
then unrar. then u will see a folder "dload"
copy it on your external sdcard (with a pc)
preferably the sdcard must be empty and formated before
make sure the phone is of. insert sd card.
then pres power+vol up+vol down
it should work
Click to expand...
Click to collapse
Sorry i shuld have mentioned this earlier iam actually using the huawei ascend mate (mt1-t00) while i think this rom is for the mt1-u06 version
Click to expand...
Click to collapse
hamzafoad said:
wulfy1000 said:
Sorry i shuld have mentioned this earlier iam actually using the huawei ascend mate (mt1-t00) while i think this rom is for the mt1-u06 version
Click to expand...
Click to collapse
i really need help plz culd someone help me
Click to expand...
Click to collapse
hamzafoad said:
hamzafoad said:
i really need help plz wi someone help me
Click to expand...
Click to collapse
Hi!
Please download from your HAM an stock firmware! Extract UPDATE.APP from this firmware and cpoy UPDATE.APP on your external sdcard in directory /dload. In your external sdcard you must see /dload/UPDATE.APP.
Now pot your sdcard on your device, ( make sure your device is not connected with USB cable !) press and keep at the same time : volume down, volume up & power button ! After awhile your device will be able to re-write your firmware from /dload/UPDATE.APP.
Good luck!
Click to expand...
Click to collapse
surdu_petru said:
hamzafoad said:
Hi!
Please download from your HAM an stock firmware! Extract UPDATE.APP from this firmware and cpoy UPDATE.APP on your external sdcard in directory /dload. In your external sdcard you must see /dload/UPDATE.APP.
Now pot your sdcard on your device, ( make sure your device is not connected with USB cable !) press and keep at the same time : volume down, volume up & power button ! After awhile your device will be able to re-write your firmware from /dload/UPDATE.APP.
Good luck!
Click to expand...
Click to collapse
i tried that and the process is going on untill it says
writing module MD5RSA...OK
writing module CRC......OK
writing module CURVER....OK
writing module VERLIST.......
Huawei usb update fail
cust copying files
copy cust files successed!
Click to expand...
Click to collapse
hamzafoad said:
surdu_petru said:
i tried that and the process is going on untill it says
writing module MD5RSA...OK
writing module CRC......OK
writing module CURVER....OK
writing module VERLIST.......
Huawei usb update fail
cust copying files
copy cust files successed!
Click to expand...
Click to collapse
Please remove USB cable to be able to flash stock firmware on stock recovery ! If you already tried to flash stock firmware without USB cable connected, than it looks like you need to go to service centre, because module VERLIST cannot be written on your device !
I was in the same situation, my issue was ( writing module SYSTEM failure ) !
Click to expand...
Click to collapse
surdu_petru said:
hamzafoad said:
Please remove USB cable to be able to flash stock firmware on stock recovery ! If you already tried to flash stock firmware without USB cable connected, than it looks like you need to go to service centre, because module VERLIST cannot be written on your device !
I was in the same situation, my issue was ( writing module SYSTEM failure ) !
Click to expand...
Click to collapse
so how did u fix it.
Click to expand...
Click to collapse
I would redownload the update.app. the zip could be corrupted. Also make sure when you unrar it use 7zip or winrar. Once i used the windows archiver and it wouldn't work.
Sent from my P6-U06 using xda app-developers app
Hi guys,
I have almost the same problem and reaaaaallly would love to get some help. I bricked the HAM during installation of CM10.1. Had root acces and TWRP, But now it just gets stuk in the HUAWEI ASCEND screen.
If I boot into huawei recovery it goes into boot look during and can't finsish installation!
Is there anything I can do?? Or is my phone dead?
Pleeaase advise
markteunis said:
Hi guys,
I have almost the same problem and reaaaaallly would love to get some help. I bricked the HAM during installation of CM10.1. Had root acces and TWRP, But now it just gets stuk in the HUAWEI ASCEND screen.
If I boot into huawei recovery it goes into boot look during and can't finsish installation!
Is there anything I can do?? Or is my phone dead?
Pleeaase advise
Click to expand...
Click to collapse
'' it goes into boot look during '' ? Please explain.
ZuperStyler said:
'' it goes into boot look during '' ? Please explain.
Click to expand...
Click to collapse
Sorry i meant it will get stuck in a Boot loop, it keeps restarting itself.
So it starts with the update and then it checks all the =ok but it only comes to SYSTEM and then it reboots itself.
markteunis said:
Sorry i meant it will get stuck in a Boot loop, it keeps restarting itself.
So it starts with the update and then it checks all the =ok but it only comes to SYSTEM and then it reboots itself.
Click to expand...
Click to collapse
Try this, and see if it works.
1. Make sure the SD card is formatted as fat32.
2. Redownload the UPDATE.APP
3. Make sure when you are doing the update make sure your HAM is not connected to the PC via USB cable.
If these don't work, go into recovery and choose wipe cache/factory reset. Try rebooting and see if anything happens.
bokchoi2020 said:
Try this, and see if it works.
1. Make sure the SD card is formatted as fat32.
2. Redownload the UPDATE.APP
3. Make sure when you are doing the update make sure your HAM is not connected to the PC via USB cable.
If these don't work, go into recovery and choose wipe cache/factory reset. Try rebooting and see if anything happens.
Click to expand...
Click to collapse
Thanks I tried both with no succes
If I go in huawei recovery by pressing Power + volume up +volume down and do a full wipe HAM will reboot itself automatically after 10 secs still get stuck in Boot screen Huawei Ascend after reboot.
I formatted the SD and put the Update.app in dload folder. HAM is not connected to PC. Still it comes no further then checking system before it switches itself off agian.
I am getting desperate Thanks for the help so far:highfive:
Still have problem, nothing seems to work!
Anybody else that might be able to help?
BTW. Anyone tested if multiloader works on soft bricked phones:
http://forum.xda-developers.com/showthread.php?t=2618253

About using flash tool in my sony xperia m dual c2005

I have some doubts about the using of flash tool.
1. Is it necessary to unlock the boatloader before flashing my phone?
2. Is it necessary to tick the usb debugging before using flash tool?
3. When i use flash tool, after some time it shows failed in my xperia m dual c2005. I am curious to know the reason behind it..
Any body please help me to clear my doubts....
N RAM said:
I have some doubts about the using of flash tool.
1. Is it necessary to unlock the boatloader before flashing my phone?
2. Is it necessary to tick the usb debugging before using flash tool?
3. When i use flash tool, after some time it shows failed in my xperia m dual c2005. I am curious to know the reason behind it..
Any body please help me to clear my doubts....
Click to expand...
Click to collapse
Yes the bootloader obviously should be unlocked before you do the flashing stuff!Flashtool works for me and the state of usb debugging never affected its functionality ! Make sure you have all the drivers properly installed!
ojas12345 said:
Yes the bootloader obviously should be unlocked before you do the flashing stuff!Flashtool works for me and the state of usb debugging never affected its functionality ! Make sure you have all the drivers properly installed!
Click to expand...
Click to collapse
Thanks bro..:good:
Dude one more simple doubt. Is it possible for you to tell me how to install the drivers in my win 7?
Now I am facing another problem. I just tried to restore my xperia m dual c2005. But it didn't go well. I saw my xperia waves got stucked. So i just removed my battery an replaced it. When I switched on my phone it only shows SONY logo. I tried to repair my software by using PCC and Xperia Companion. It shows error messages. Then i showed it to a mobile service agent in a local mobile shop. He told me that m dual c2005 model had a sony only memory. So they cannot do it because the memory can't be re-writeted in this model. Is that true? Or is there any other better option to resolve my phone's issue?
Please help me bro....:crying:
N RAM said:
Thanks bro..:good:
Dude one more simple doubt. Is it possible for you to tell me how to install the drivers in my win 7?
Now I am facing another problem. I just tried to restore my xperia m dual c2005. But it didn't go well. I saw my xperia waves got stucked. So i just removed my battery an replaced it. When I switched on my phone it only shows SONY logo. I tried to repair my software by using PCC and Xperia Companion. It shows error messages. Then i showed it to a mobile service agent in a local mobile shop. He told me that m dual c2005 model had a sony only memory. So they cannot do it because the memory can't be re-writeted in this model. Is that true? Or is there any other better option to resolve my phone's issue?
Please help me bro....:crying:
Click to expand...
Click to collapse
To Install the drivers
I think you might be able to solve this problem! The problem is with your partitions.So follow:
first of all install fastboot and adb drivers from: http://forum.xda-developers.com/showthread.php?p=48915118
go to device manager and verify that and android device interface or something like that appears.
If it doesnt then s1 boot device will appear as unknown device , right click on that and update device driver and then select the option let me pick from drivers on my computer .
After that select android device then dont select anything , itll get autoselected and click next!
now your device should appear in device manager!
To restore the system completely
Install a recovery for the device by the following procedure :
first download twrp from https://twrp.me/devices/sonyxperiam.html, rename it to recovery.img
go to cmd with admin rights in the folder in which recovery is put
(flash the recovery in boot sector)
type :
fastboot flash boot recovery.img
now boot the phone up the recovery should automatically open up, it may get stuck for some time but only once it will so be patient,;
go to wipe, then advanced wipe! select every option and micro sd,internal storage and usb-otg are optional
then swipe to wipe , it will show that it failed but dont worry some partitions are of sort that they show error now after this the problem should be resolved , after this flash a rom of your choice or restore a dual stock firmware backup (note: you cannot restore backups which were made from cwm , for that flash philz or cwm recovery)
Please report and hit thanks if i helped you!
ojas12345 said:
To Install the drivers
I think you might be able to solve this problem! The problem is with your partitions.So follow:
first of all install fastboot and adb drivers from: http://forum.xda-developers.com/showthread.php?p=48915118
go to device manager and verify that and android device interface or something like that appears.
If it doesnt then s1 boot device will appear as unknown device , right click on that and update device driver and then select the option let me pick from drivers on my computer .
After that select android device then dont select anything , itll get autoselected and click next!
now your device should appear in device manager!
To restore the system completely
Install a recovery for the device by the following procedure :
first download twrp from https://twrp.me/devices/sonyxperiam.html, rename it to recovery.img
go to cmd with admin rights in the folder in which recovery is put
(flash the recovery in boot sector)
type :
fastboot flash boot recovery.img
now boot the phone up the recovery should automatically open up, it may get stuck for some time but only once it will so be patient,;
go to wipe, then advanced wipe! select every option and micro sd,internal storage and usb-otg are optional
then swipe to wipe , it will show that it failed but dont worry some partitions are of sort that they show error now after this the problem should be resolved , after this flash a rom of your choice or restore a dual stock firmware backup (note: you cannot restore backups which were made from cwm , for that flash philz or cwm recovery)
Please report and hit thanks if i helped you!
Click to expand...
Click to collapse
Thanks dude... Are you sure about this idea?
My phone is not an Indian phone. It is from Dubai. Will this country change damage my phone's main board when I boot it?
And some more doubts are remaining... May I please clear it with you....
Which will be the best flashtool?
Emma tool provided by Sony or flashtool-0.9.18.1 or flashtool-0.9.21.0
When do I need to connect my handset to the computer? Is it before when I go to cmd to type fastboot flash boot recovery.img ?
Whether I need to install flash tool before installing device drivers?
Please help me to clear all my doubts....
N RAM said:
Thanks bro..:good:
Dude one more simple doubt. Is it possible for you to tell me how to install the drivers in my win 7?
Now I am facing another problem. I just tried to restore my xperia m dual c2005. But it didn't go well. I saw my xperia waves got stucked. So i just removed my battery an replaced it. When I switched on my phone it only shows SONY logo. I tried to repair my software by using PCC and Xperia Companion. It shows error messages. Then i showed it to a mobile service agent in a local mobile shop. He told me that m dual c2005 model had a sony only memory. So they cannot do it because the memory can't be re-writeted in this model. Is that true? Or is there any other better option to resolve my phone's issue?
Please help me bro....:crying:
Click to expand...
Click to collapse
N RAM said:
Thanks dude... Are you sure about this idea?
My phone is not an Indian phone. It is from Dubai. Will this country change damage my phone's main board when I boot it?
And some more doubts are remaining... May I please clear it with you....
Which will be the best flashtool?
Emma tool provided by Sony or flashtool-0.9.18.1 or flashtool-0.9.21.0
When do I need to connect my handset to the computer? Is it before when I go to cmd to type fastboot flash boot recovery.img ?
Whether I need to install flash tool before installing device drivers?
Please help me to clear all my doubts....
Click to expand...
Click to collapse
The country doesnt matter you may flash any country's generic rom,mine was indian but I flashed brazillian..
And about the flashtool I dont think emma is good , i prefer flashtool any version...if you find the latest not working then you may try the second latest but 99% it does work good..
Most important : You need to connect your device in fastboot before installing drivers and flash the boot partition by those command so go here on how to boot in fastboot mode http://www.theandroidsoul.com/boot-sony-xperia-m-fastboot-mode-51835/
try and report ...
All the best:good:
ojas12345 said:
The country doesnt matter you may flash any country's generic rom,mine was indian but I flashed brazillian..
And about the flashtool I dont think emma is good , i prefer flashtool any version...if you find the latest not working then you may try the second latest but 99% it does work good..
try and report ...
All the best:good:
Click to expand...
Click to collapse
You are really awesome!!
For this do I need to unlock the bootloader?
Yeah. I will report about our experiment after trying it...:good:
Is it possible for me to relock bootloader? If yes, please explain me about that method...
N RAM said:
You are really awesome!!
For this do I need to unlock the bootloader?
Yeah. I will report about our experiment after trying it...:good:
Is it possible for me to relock bootloader? If yes, please explain me about that method...
Click to expand...
Click to collapse
yes you will have to unlock bootloader and for that too i suggest you use flashtool because it does the work in seconds,!
and for relocking i dont there's any method to relock bootloader , u dont need to do that after all!
It enables you to flash modes and other cool stuff! even if you dont wanna do that then dont touch it !flash a cyanogenmod recovery,which is quite basic and wont modify anything that may harm your phone...
All the best
What will be the difference between the firmwares C2005_15.5.A.1.5_CE.ftf and C2005_15.5.A.1.5_DE.rar?
Which will be the best for me to download?
ojas12345 said:
To Install the drivers
I think you might be able to solve this problem! The problem is with your partitions.So follow:
first of all install fastboot and adb drivers from: http://forum.xda-developers.com/showthread.php?p=48915118
go to device manager and verify that and android device interface or something like that appears.
If it doesnt then s1 boot device will appear as unknown device , right click on that and update device driver and then select the option let me pick from drivers on my computer .
After that select android device then dont select anything , itll get autoselected and click next!
now your device should appear in device manager!
To restore the system completely
Install a recovery for the device by the following procedure :
first download twrp from https://twrp.me/devices/sonyxperiam.html, rename it to recovery.img
go to cmd with admin rights in the folder in which recovery is put
(flash the recovery in boot sector)
type :
fastboot flash boot recovery.img
now boot the phone up the recovery should automatically open up, it may get stuck for some time but only once it will so be patient,;
go to wipe, then advanced wipe! select every option and micro sd,internal storage and usb-otg are optional
then swipe to wipe , it will show that it failed but dont worry some partitions are of sort that they show error now after this the problem should be resolved , after this flash a rom of your choice or restore a dual stock firmware backup (note: you cannot restore backups which were made from cwm , for that flash philz or cwm recovery)
Please report and hit thanks if i helped you!
Click to expand...
Click to collapse
Which is the best site for downloading latest firmware?
N RAM said:
Which is the best site for downloading latest firmware?
Click to expand...
Click to collapse
intead of flashing firmware ,it is better to flash a backup because , no chances of error
download the backup for your device from here and restore it via cwm based recovery like philz or cwm itselg
http://forum.xda-developers.com/showthread.php?t=2703161
ojas12345 said:
yes you will have to unlock bootloader and for that too i suggest you use flashtool because it does the work in seconds,!
and for relocking i dont there's any method to relock bootloader , u dont need to do that after all!
It enables you to flash modes and other cool stuff! even if you dont wanna do that then dont touch it !flash a cyanogenmod recovery,which is quite basic and wont modify anything that may harm your phone...
All the best
Click to expand...
Click to collapse
I tried to flash my xperia m dual c2005. Its only showing like the picture for long time.
what will be this? please reply me fast...
N RAM said:
I tried to flash my xperia m dual c2005. Its only showing like the picture for long time.
what will be this? please reply me fast...
Click to expand...
Click to collapse
wait for some time i think it'll take time to do that or else flash a backup after flashing a cwm based recovery!
ojas12345 said:
wait for some time i think it'll take time to do that or else flash a backup after flashing a cwm based recovery!
Click to expand...
Click to collapse
what is the meaning of that red writings?
N RAM said:
what is the meaning of that red writings?
Click to expand...
Click to collapse
I never faced that kind of a thing , make sure that you are flashing the right file!
You have unlocked your bootloader?
Again I say better flash a recovery then a backup ,its much easier.
ojas12345 said:
I never faced that kind of a thing , make sure that you are flashing the right file!
You have unlocked your bootloader?
Again I say better flash a recovery then a backup ,its much easier.
Click to expand...
Click to collapse
My phone is only showing SONY logo. So is it possible for this recovery? If yes, please tell me the correct tutorial for that and if possible any video tutorial so that i can understand it correctly...
not working
ojas12345 said:
To Install the drivers
I think you might be able to solve this problem! The problem is with your partitions.So follow:
first of all install fastboot and adb drivers from: http://forum.xda-developers.com/showthread.php?p=48915118
go to device manager and verify that and android device interface or something like that appears.
If it doesnt then s1 boot device will appear as unknown device , right click on that and update device driver and then select the option let me pick from drivers on my computer .
After that select android device then dont select anything , itll get autoselected and click next!
now your device should appear in device manager!
To restore the system completely
Install a recovery for the device by the following procedure :
first download twrp from https://twrp.me/devices/sonyxperiam.html, rename it to recovery.img
go to cmd with admin rights in the folder in which recovery is put
(flash the recovery in boot sector)
type :
fastboot flash boot recovery.img
now boot the phone up the recovery should automatically open up, it may get stuck for some time but only once it will so be patient,;
go to wipe, then advanced wipe! select every option and micro sd,internal storage and usb-otg are optional
then swipe to wipe , it will show that it failed but dont worry some partitions are of sort that they show error now after this the problem should be resolved , after this flash a rom of your choice or restore a dual stock firmware backup (note: you cannot restore backups which were made from cwm , for that flash philz or cwm recovery)
Please report and hit thanks if i helped you!
Click to expand...
Click to collapse
i am getting this error :
C:\Fastboot\android-sdk-windows\tools>fastboot flash boot recovery.img
sending 'boot' (11208 KB)...
FAILED (status read failed (Too many links))
finished. total time: -0.000s

Categories

Resources