I had my original ROM back up to SD yesterday by performing a hard reset (hold on/off key then press the soft-reset button), then successful copy "CE + Boot to SD" to the card. But today, I can't perform the hard reset anymore. When I hold on/off key then press the soft-reset button, there is no option for me to choose, it only look like a soft reset. BTW, I did not neither change, modify or install anything since yesterday.
Anyone has any suggestion? Tks.
hhmmm never knew you could hardreset xda1's that way i believed that you needed to stick the stylus into the small hole on the otherside of the connector as in 1 hole for softreset and 1 hole for hardreset
Yes, the hard reset button on xda 1 is the tiny hole next to headset socket, push once, leave for 1 minute then push once more for fresh factory reboot. This procedure MUST be carried out after flashing phone.
I'm sorry I did call the wrong name for that procedure.
The problem is when I did successful unlock my Siemens SX 56 via ActiveSync by install the Special Edition rom 1.2, I couldn't enter the "bootloader" by hold on/off key then press the soft-reset button. Anyone pls help.
Is This the correct section ?
I have a xda2 exec. I tried to update my rom, the congratulations screen displayed with a checking informaton on device message, this froze for some time so I disconnected the usb cable. when I tried to reset it, I get is a dispaly with just colours on it and it does nothing else, when I try to update again it shows an error connection error 101, also the device is not recognised. Is there a way to resolve this issue please and can someone be kind enought to direct me.
I used the rom update from - my-xda.com/xdaexec_soft2.html
Thank you in advance.
Try to hard reset your device
hold buttons: "-" + "-"
and then reset
so in practical terms, push the top 2 dash keys which are between your green and red phone icon buttons, and while holding them reset your device using the pen.
this should give you a white screen with a little menu.
You can now select clear device or something, I think it's the 0 or the X
it should work
if that doesn't work try to put your device in Bootloader
buttons: Backlight (front little button) + power button + reset button (with your pen)
again, hold the backlight and power button, then reset button
the screen should be dark, but if you look real close it would say USB or Serial v1.0 or v1.1 or something
you should be able to flash now using the tool
Also look around on this forum, loads of topics about upgrading/flashing and hanging problems
more info: http://forum.xda-developers.com/showthread.php?t=290234
u might have to update bootloader, try 2 read wiki.xda-developers.com lots of usefulll infos for beginers
Thank you
To both members above, thank you for your time. I am now using the update tool, hopefully this will now work. I used the method pressing the light button and power and reset. (Bootloader)
hi there not sure if my phone is a universal but looks like the pic in the front. anyway i was installin WM6 and when install getdata or sumfink it just went to this blank sceen which says serial v2.01. what do i do nothing works ive tried soft/hard rest nuthin! HELP!!!!!!!
jackador said:
hi there not sure if my phone is a universal but looks like the pic in the front. anyway i was installin WM6 and when install getdata or sumfink it just went to this blank sceen which says serial v2.01. what do i do nothing works ive tried soft/hard rest nuthin! HELP!!!!!!!
Click to expand...
Click to collapse
Remove the battery for 15 minutes or so then re-insert it and try to restart your machine. Note: hard reset requires you to hold down the two - (dash) keys and press the reset button. Some folk (perhaps not you) think that pressing the reset button with the stylus is a hard reset, but that is just a soft one. Good Luck.
you are in the boot loader mode ... read the topic with title :
all of you stuck in bootloader... goodluck.
Hey
I hope some one could help me on this small problem.
I just tryng to resest my XDA IIs back to defaults, clear all on the memory.
Im running WM6 and im a bit lost on how to do a hard reset please help me.
Thank You
Dal.
Hard Reset
If this is new ROM you should go to Boot Loader first.
How to make Hard Reset:
1.Perform Soft Reset
2.Push Record and Camera button at the same time and hold them until the Boot Loader screen shows up.
P.S. You should do step 2. before the Radio version/ROM version appear in the right bottom of the screen.
3.“Enable KITL” must be NO, “Clean Registry Hive” must be YES, “Format Storage” must be YES
P.S. Use the Record and Camera buttons for navigation.
4.Press Mail button.(Do not touch anything until the white screen disappears)
NOTE: IF YOU WANT TO GET RID OT THE PASSWORD(WITHOUT DELETING YOUR FILES) YOU SHOULD PERFORM NO/YES/NO PROCEDURE!
That's it! Good Luck!
hey guys
how is it?
i have a problem with my diamond, its very strange
i already installed hardspl 1.24 on the phone
and now if i want to install the dutty v4 for my diamond .. alway when i click update to this rom its restarting active sync or the vista tool gets closed and the device isn't updating
on myother windows xp machine there is a application error if i want to start the dutty tool
can anybody help me?
thanks in advance and have a great week
rob
You should install this using the internal method.
Just grab the .nbh file and rename it DIAMIMG.nbh
Put this in your Internal 4GB storage.
Soft reset your device and immediately press the Vol. Down and back button and a grey screen will appear. Vol up to install. After, don't forget to hard reset your phone.
hey you
thanks for your quick answer
but it isn't working if i soft reset the device and press vol down and back (the arrow which is pinting to left) it doesn't open a menu!
do i need a special hard spl? or do i something wrong on the reset?
i just don't get te screen, it's just starting normally
really strange!
thanks in advance
robsterr said:
hey you
thanks for your quick answer
but it isn't working if i soft reset the device and press vol down and back (the arrow which is pinting to left) it doesn't open a menu!
do i need a special hard spl? or do i something wrong on the reset?
i just don't get te screen, it's just starting normally
really strange!
thanks in advance
Click to expand...
Click to collapse
No, a special hard spl is not required. Any one will do. You are probably not doing the procedure quick enough. Try again.
When you soft reset get your hands immediately ready to press both (Vol. Down + Back Arrow Button). HOLD this until you see the grey menu and follow the instructions.
And make sure the DIAMIMG.nbh file is in your Internal Storage (4GB)
On my phone, the vol-down + back-button doesn't work either. It just resets the phone as normal. A vol-down + enter-button does move it to the hard-reset screen though, then an up-arrow finishes the hard reset, but not loading the DIAMIMG.nbh file. Maybe they removed the vol-down + back-button? Or changed it somehow?
Make sure that your internal storage is FAT32, It wont work if it is anything else
When you get to the grey screen, it tells you to Press the power button to update
razorbud said:
Make sure that your internal storage is FAT32, It wont work if it is anything else
Click to expand...
Click to collapse
Yep, fat32...
LandyMan said:
When you get to the grey screen, it tells you to Press the power button to update
Click to expand...
Click to collapse
Doesn't work, and the text is not there either.
I also think it's important to change the name .nbh before you transfer it to your phone, at least it was for me!
Well, I figured out one mystery. For my model version, it's not vol-down + back-arrow to get into the SPL screen on power up. It's vol-down only while powering on the device. Go figure!
Still stuck with no ability to install Hard SPL though
scottwilkins said:
Well, I figured out one mystery. For my model version, it's not vol-down + back-arrow to get into the SPL screen on power up. It's vol-down only while powering on the device. Go figure!
Still stuck with no ability to install Hard SPL though
Click to expand...
Click to collapse
ALL MODELS SHOULD BE THE SAME>>
Basic Info.
(Soft Reset and press Vol. Down) = Get To Bootloader
(Soft Reset and Press Vol. Down + back-arrow) = To Install Radio or ROM form Internal Storage (must have DIAMIMG.nbh in first before flashing)
To confirm that there is no confusion. The "Back arrow" button is the one above the hang up button. NOT left of the middle circle button
So press volume down, Back arrow and then with your third hand, press the reset button with the stylus. Continue to hold the Vol Down and Back Arrow until the image install screen appears. (about 2 seconds)
Sorry guys, no the back-arrow button plus Vol-down does not work. Vol-down alone does. The new phones are different, I'm almost 100% positive they are. The stock SPL was version 1.95 which I've not yet seen here. And, I can't seem to dump any of the ROM (and now can't dump the SPL, BUMMER!, but that's another issue...)
But vol-down + enter + reset does give the clear memory option, with a slightly different wording on the reset screen that what I've read here that it should be.
scottwilkins said:
Sorry guys, no the back-arrow button plus Vol-down does not work. Vol-down alone does. The new phones are different, I'm almost 100% positive they are. The stock SPL was version 1.95 which I've not yet seen here. And, I can't seem to dump any of the ROM (and now can't dump the SPL, BUMMER!, but that's another issue...)
But vol-down + enter + reset does give the clear memory option, with a slightly different wording on the reset screen that what I've read here that it should be.
Click to expand...
Click to collapse
Well so far your device seems to be the first out of the gate that reacts this way.
Sorry to hear!
dude plz help me where can i get dutty v4 rom for diamond......