Related
Hi,
I have a problem with my QTek 9090.
when i want to hard reset it, (power, record, camera and reset) it just displayed the 4 colored bands and stuck here.
how can i restore the normal booting sequence ?
thx.
this is normal, no problem. OS is kichen, no orginal. My Qtek work perfect WM6. Thanks Helmi!
so what should i do because it is block on this stupid 4 colored bands screen...
hard and soft reset do not help.
are you sure you have chosen No/Yes/Yes to clean the registy hive and format the storage at hard reset?
have you pressed the Mail Button to execute the instruction?
being stuck at the 4color screen is a common glitch in wm6 upgrading but nothing serious, that's because even though you flashed the ROM, your storage still has the files of your OLD Os (ex. WM2003).
you have to format the storage to have a fresh and working OS.
the problem is that i did not get any message on screen to which i can answer yes or no :-(
i effectively read some article in this forum about such step, but my Qtek 9090 did not propose me something like that !
:-(
i tried the steps you posted in http://forum.xda-developers.com/showpost.php?p=1603200&postcount=8
but the menu is never displayed :-(
oh... ok.
try pressing Camera + Record... before you stick the Soft Reset.
hold them until you see the menu.
if that doesnt work. then maybe one of the required button is failing.
good luck!
unfortunatelly, it does not work :-(
this is making me crazy...
try searching for MMTY hard reset. that's probably the thing that you need.
i did not find anything about MMTY and hard reset...
:-(
any additional help would be very appreciated
You would find you get a better response if you explain what rom it was that you were installing when this happened,was the rom for your device and did it complete fully?
scousemartin is right... we need details.
about MTTY ok...
here's a link about MTTY on Hermes Bootloader... some of its commands are general and can be used on BA with care.
look for something specific to your problem
i.e. Task 28 to format your DOC.
Hi there
The first time that I have attempted to perform the upgrade to a cooked rom and everything has gone horribly wrong.
A reset (using the pin hole) gives a blank display. Nothing at all.
A hard reset (using pin hole and soft keys) gives the option to perform hard reset by pressing Yes. This then gives HTC logo screen and then system hangs after displaying
IPL 3.13.0001
SPL 1.11.0000
I can go into bootloader screen (pressing two side buttons) and can connect USB. When I try to install factory ROM or any cooked ROM it stops at 2% and gives me an error saying
Error 228 - Invalid File Size
Is there anything I can do to save my device?
Please help.
are you sure that you have the right factory rom?
must be the one that was on your device when you bought it!
had the same problem! flashing with original rom solved it!
Yes - this is the WM5 rom that I had orginally before upgrading to WM6.
Bricked P3300
try and remove the minisd card
that must be the cause
cheers
jayzd1
Bootloader is not just by pressing two buttons. Press both the buttons and make a soft-reset. When the tri-color screen appears, connect to USB and perform the ROM upgrade again. If it fails, perform the upgrade with a factory ROM. This will bring back your device to working condition.
Next time before flashing, make sure you have applied Hard SPL once.
Regards,
Carty..
hello i have wm6 on my ba and i wanna give hard reset!!! i don't know how! please help!!!!
Have a look here:
- http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel
- http://wiki.xda-developers.com/index.php?pagename=BlueAngel_For_Beginners
And next time try this one: http://forum.xda-developers.com/search.php
Greets Rossi
pls help~~~
where? i have ba whit wm6!!! i try all of them for there, not working! there is for ba whit wm5 or wm2003! for wm6 nothing!
helppp!!
on/off + reset button at the same time... not work!
recor+ on\off+reset =serial message on the screen ( i think that is bootloader)
anything alse i need! please helppp!!!
I can't hard reset either
I have followed all of the directions on the wiki, I have even tried to install another rom and it still will not remove all of the data, it changed the information in the about section of my settings but that's it. I want to change ROMs but it is not working. any ideas?
What version of windows is on your PC?
also try the enter BL which is on most ROMs
Hard Reset
To hard reset you do a soft reset (power + reset)
and before it shows the version numbers at the bottom you have to press Record + Camera & also power (i think) and then you come to an options screen using the record button to go down the list and camera to select you select Yes for option 2 and 3 and then hit the mail button to apply.
jidi22 said:
hello i have wm6 on my ba and i wanna give hard reset!!! i don't know how! please help!!!!
Click to expand...
Click to collapse
swick off button & rest buton in the same time but take care if is not the original windows you may have problems
Warm Boot: Reset the unit by pressing reset button.
Cold Boot: Press Power ++ Reset the unit simultaneously.
Read this. It's how to hard reset your BA. Hope it helps. Make sure you already formated the storage.
Code:
http://wiki.xda-developers.com/index...izzardUpgrade4
Hi all...
My Blue Angel wont hard reset. I just bought it second hand and have been trying to hard reset it. I read up and the instructions are to keep the power button pressed while resetting with the stylus. But no matter how many times I tried, this procedure only soft resets the device. Please help!
Try it the software way by going to start>settings>system>clear storage>1234>ok.
kareem9nba said:
Try it the software way by going to start>settings>system>clear storage>1234>ok.
Click to expand...
Click to collapse
Hi buddy.. thanks so much for the reply... but its not working.. tapping on the clear storage icon in settings does not bring up the password screen or do anything at all
wat are my other options people... pls help
anybody??????
i think you make wrong HardReset.
for Hard Reset a BA just press RECORD+CAMERA/PLAYER+SOFT RESET 2 sec. and walaahhh.... there you go.., You'll see three options on screen. You must change the second and the third to yes. If you are not developing/testing software you can disable the first debug option for better performance.
have a nice reset
Stevo.Mksr said:
i think you make wrong HardReset.
for Hard Reset a BA just press RECORD+CAMERA/PLAYER+SOFT RESET 2 sec. and walaahhh.... there you go.., You'll see three options on screen. You must change the second and the third to yes. If you are not developing/testing software you can disable the first debug option for better performance.
have a nice reset
Click to expand...
Click to collapse
Thank you soooo much Stevo... Ur method worked... I wonder why the wiki itself has the wrong method for hard reset... Maybe the hard reset varies from brand to brand... although it should not be since the hardware essentially is the same... Anyways... Hopefully one of the moderators would read this thread and add your method to the wiki...
Million thanks again...
I get that 3 choice screen, but how to I get it to hard-reset AFTER that? If I hit the soft-reset I get the same thing I have gotten for the whole day before. :-(
on the screen must be shown
enable kitl :choose no
clear registry hive : choose yes
format storage : choose yes
change it using the record and camera button.. after that use the mail button to proceed the hard reset
evoluzionne said:
on the screen must be shown
enable kitl :choose no
clear registry hive : choose yes
format storage : choose yes
change it using the record and camera button.. after that use the mail button to proceed the hard reset
Click to expand...
Click to collapse
tried the above but unable to press enter using mail button to initiate rebootin. pls help
Procedure works as advertised
I also was scratching my head over the Hard Reset info in the Wiki not working. This procedure did the trick. Thanks for the help!
Also, for the poster who had trouble with the Mail button not initiating a reboot, just hold it until you get an all white screen, that's what I did and it worked like a charm!
Hard Reset Big Thank Q
Hi every1, the step does work & i would like to thks those who has shared there thought with all.
juz press the "mail" button for about 3 miniutes & you shud see a totally white blankscreen & then it will bring you to formatted WM6. whatever u install previously will be wipe out.
After i hv tried various method.Honestly, this is the only method work to overcome "EXTREME FROZED WM6".
Thks to XDA developer community for sharing.
Just curious, any1 know wat mig hv cause the "EXTREME FROZED WM6"?
Have a nice day every1.
RGds
Thks mysteroid,
For making me holdin on to d "Mail" button. It really works. Brilliant.
Have a nice day.
Consolidated Solution
To the next member whois searchin for a solution here it is:
Problem:My O2 XDAiis won't hard reset. WM6 deep FROZED.
Solution: Extreme Hard Reset a XDAiis just press RECORD+CAMERA+SOFT RESET 2 sec. and walaahhh.... there you go.., You'll see three options on screen. Then use RECORD+CAMERA/PLAYER button to change the value on the setting.
Setting: on the screen must shown
enable kitl :choose no
clear registry hive : choose yes
format storage : choose yes
Finally: use the mail button(act as enter) to proceed the hard reset. U might need to press & hold it for 3minutes.
Kudos to original contributor :Stevo.Mksr(for method) , evoluzionne(for setting) & mysteroid(for keepin the faith).
WM6 deep FROZED -> check/replace your battery
hey guys
how is it?
i have a problem with my diamond, its very strange
i already installed hardspl 1.24 on the phone
and now if i want to install the dutty v4 for my diamond .. alway when i click update to this rom its restarting active sync or the vista tool gets closed and the device isn't updating
on myother windows xp machine there is a application error if i want to start the dutty tool
can anybody help me?
thanks in advance and have a great week
rob
You should install this using the internal method.
Just grab the .nbh file and rename it DIAMIMG.nbh
Put this in your Internal 4GB storage.
Soft reset your device and immediately press the Vol. Down and back button and a grey screen will appear. Vol up to install. After, don't forget to hard reset your phone.
hey you
thanks for your quick answer
but it isn't working if i soft reset the device and press vol down and back (the arrow which is pinting to left) it doesn't open a menu!
do i need a special hard spl? or do i something wrong on the reset?
i just don't get te screen, it's just starting normally
really strange!
thanks in advance
robsterr said:
hey you
thanks for your quick answer
but it isn't working if i soft reset the device and press vol down and back (the arrow which is pinting to left) it doesn't open a menu!
do i need a special hard spl? or do i something wrong on the reset?
i just don't get te screen, it's just starting normally
really strange!
thanks in advance
Click to expand...
Click to collapse
No, a special hard spl is not required. Any one will do. You are probably not doing the procedure quick enough. Try again.
When you soft reset get your hands immediately ready to press both (Vol. Down + Back Arrow Button). HOLD this until you see the grey menu and follow the instructions.
And make sure the DIAMIMG.nbh file is in your Internal Storage (4GB)
On my phone, the vol-down + back-button doesn't work either. It just resets the phone as normal. A vol-down + enter-button does move it to the hard-reset screen though, then an up-arrow finishes the hard reset, but not loading the DIAMIMG.nbh file. Maybe they removed the vol-down + back-button? Or changed it somehow?
Make sure that your internal storage is FAT32, It wont work if it is anything else
When you get to the grey screen, it tells you to Press the power button to update
razorbud said:
Make sure that your internal storage is FAT32, It wont work if it is anything else
Click to expand...
Click to collapse
Yep, fat32...
LandyMan said:
When you get to the grey screen, it tells you to Press the power button to update
Click to expand...
Click to collapse
Doesn't work, and the text is not there either.
I also think it's important to change the name .nbh before you transfer it to your phone, at least it was for me!
Well, I figured out one mystery. For my model version, it's not vol-down + back-arrow to get into the SPL screen on power up. It's vol-down only while powering on the device. Go figure!
Still stuck with no ability to install Hard SPL though
scottwilkins said:
Well, I figured out one mystery. For my model version, it's not vol-down + back-arrow to get into the SPL screen on power up. It's vol-down only while powering on the device. Go figure!
Still stuck with no ability to install Hard SPL though
Click to expand...
Click to collapse
ALL MODELS SHOULD BE THE SAME>>
Basic Info.
(Soft Reset and press Vol. Down) = Get To Bootloader
(Soft Reset and Press Vol. Down + back-arrow) = To Install Radio or ROM form Internal Storage (must have DIAMIMG.nbh in first before flashing)
To confirm that there is no confusion. The "Back arrow" button is the one above the hang up button. NOT left of the middle circle button
So press volume down, Back arrow and then with your third hand, press the reset button with the stylus. Continue to hold the Vol Down and Back Arrow until the image install screen appears. (about 2 seconds)
Sorry guys, no the back-arrow button plus Vol-down does not work. Vol-down alone does. The new phones are different, I'm almost 100% positive they are. The stock SPL was version 1.95 which I've not yet seen here. And, I can't seem to dump any of the ROM (and now can't dump the SPL, BUMMER!, but that's another issue...)
But vol-down + enter + reset does give the clear memory option, with a slightly different wording on the reset screen that what I've read here that it should be.
scottwilkins said:
Sorry guys, no the back-arrow button plus Vol-down does not work. Vol-down alone does. The new phones are different, I'm almost 100% positive they are. The stock SPL was version 1.95 which I've not yet seen here. And, I can't seem to dump any of the ROM (and now can't dump the SPL, BUMMER!, but that's another issue...)
But vol-down + enter + reset does give the clear memory option, with a slightly different wording on the reset screen that what I've read here that it should be.
Click to expand...
Click to collapse
Well so far your device seems to be the first out of the gate that reacts this way.
Sorry to hear!
dude plz help me where can i get dutty v4 rom for diamond......