hey there,
ive installed the 1% fix twice and deinstalled one of them.. then reboot and the system hang up on the boot screen "TOUCH PRO 2 BRGD"......
what can i do now?
flashing a rom will bring no better news..
best
see
see said:
hey there,
ive installed the 1% fix twice and deinstalled one of them.. then reboot and the system hang up on the boot screen "TOUCH PRO 2 BRGD"......
what can i do now?
flashing a rom will bring no better news..
best
see
Click to expand...
Click to collapse
Hard reset..
how to do?
the red button is restarting with the same problem...
best
seb
i've got it.. after 5 or 6 resets it was starting again. puh!
best
see
Related
Bricked (stuck at startup screen where the Jelly guy flies into space) my LG P930 on JellyBam 3.2.0, it was previously running CM10 Stable and I followed the install instructions correctly. I've worked with 3 phones over the past 3 years and this is the first time I've had a brick, can anyone help? Don't even know how to get into recovery mode from here.
unbrick
http://forum.xda-developers.com/showthread.php?t=1784709
follow this u b fine
adamm1 said:
Bricked (stuck at startup screen where the Jelly guy flies into space) my LG P930 on JellyBam 3.2.0, it was previously running CM10 Stable and I followed the install instructions correctly. I've worked with 3 phones over the past 3 years and this is the first time I've had a brick, can anyone help? Don't even know how to get into recovery mode from here.
Click to expand...
Click to collapse
That happens to me every time I flash jellybam. Just turn it off by holding the power button and then turn it back on.
Sent from my LG-P930 using xda premium
mattman86 said:
That happens to me every time I flash jellybam. Just turn it off by holding the power button and then turn it back on.
Sent from my LG-P930 using xda premium
Click to expand...
Click to collapse
Didn't work for me, looks like I'm back to Odin and another ROM
Try this. might help
I stumbled upon the same stone as u did...I tried reflashing Jellybam 3.0.0 many times.. didnt help.. stuck at the Jellybam boot animation..
What did the trick for me is I installed the HO!NO atomic Rom and then flashed the Jellybam.. works like a charm.. only thing I noticed is that after flashing the HO!NO ROM, the baseband version lists as "Unknown" not really a problem as Jellybam is working real smooth...
Would have loved the battery performance to be better though as I was getting better backup on V20C official ICS.. all the best,
reddevil_sen said:
I stumbled upon the same stone as u did...I tried reflashing Jellybam 3.0.0 many times.. didnt help.. stuck at the Jellybam boot animation..
What did the trick for me is I installed the HO!NO atomic Rom and then flashed the Jellybam.. works like a charm.. only thing I noticed is that after flashing the HO!NO ROM, the baseband version lists as "Unknown" not really a problem as Jellybam is working real smooth...
Would have loved the battery performance to be better though as I was getting better backup on V20C official ICS.. all the best,
Click to expand...
Click to collapse
Did you ever try pulling the battery and attempting to start the phone again? Like mattman said, every single time I flash JellyBam it boot loops on the initial boot. A battery pull (or just hold the power button for like 15 seconds) and it boots up without incident.
lordcheeto03 said:
Did you ever try pulling the battery and attempting to start the phone again? Like mattman said, every single time I flash JellyBam it boot loops on the initial boot. A battery pull (or just hold the power button for like 15 seconds) and it boots up without incident.
Click to expand...
Click to collapse
No response, it would be nice if this member would come back to give a clue if he/she is still stuck or what they did to fix the issue so others who may come across this would know what to do?
Yes I did....
lordcheeto03 said:
Did you ever try pulling the battery and attempting to start the phone again? Like mattman said, every single time I flash JellyBam it boot loops on the initial boot. A battery pull (or just hold the power button for like 15 seconds) and it boots up without incident.
Click to expand...
Click to collapse
Yes, I did remove the battery and tried to boot 3-4 times to no avail.. then installed Ho!Nos HyperSonic and then Jellybam which worked..
Reply
The battery solution did not work. Will not get the time to go through the unbricking process, definitely got screwed here oh well.
Already searched in some areas of the forum, but nothing helpful.
I have got a N7100XXDLL4 Note 2. It has a H3G Italian Rom (as i've taken in a H3G store).
All of those useless apps... it's an umbearable pain.
So... i decided to change that rom to another one.
I don't remember all the steps i've done... but surely i've used the toolkit of mskip and all go flawlessly. No Fails or something.
I've noticed that CWM (or TWRP) while loading causes a "tremolo" screen all vibrating on the first "Galaxy Note 2 Gt N7100" screen
nevermind...
Cwm loaded, full wipe, rom installed (ParanoidAndroid, to be precise) and rom started
I've noticed that the rom... in charging... doesn't show the bootscreen or welcome screen (it was all black, and i've got to tap on the capacitive buttons to understand if the device was on or off) then... pressing home buttons several times screen wake up in the pin code (without the classic config wizard).
Several soft reboot to get the rom doesn't manifest that black screen problem, nothing
Several tries to get the rom working properly flashed, but nothing
So... i don't remember all the steps i've done with the toolkit... but now changing roms it causes a stuck on the bootscreen/samsung logo
Tried to find a solution and someone used this thread, but again nothing useful.
I need a solution to perform a FULL reset of the phone (any rom, any firmware) with odin, kies, whatever.
Doesn't matter if the flash counter is down or not
Thanks for reading and sorry for my bad english
http://forum.xda-developers.com/showthread.php?t=2088809
Thanks in advance, i'll try it very soon
thanks mate... problem solved with Kies!!!
(it was stucked again in the blue pulsing logo, but once in recovery mode after a cache/data wipe, it started without problems)
Many many thanks... life solver ^^
Blackbeast said:
(it was stucked again in the blue pulsing logo, but once in recovery mode after a cache/data wipe, it started without problems)
Click to expand...
Click to collapse
Thats only you needed after flashing any ROM at first place.
Coming from a SGSII and never done a full wipe after flash
(always done before flashing.. good to know so i'm always learning)
thanks to all of you!
I was running the new version of Hyperdrive until the mms stop sending so I decided to go to Goodness. Originally I could not get any rom to flash from the internal or external memory, so I pulled the sd card wiped everything and reinstalled my backup of carbon from trwp. After I confirmed the phone was working properly , i downloaded and placed goodness onto my internal memory (ext sd is not in right now) , and flashed no problem. Now the phone boots the Samsung logo, the goes into the Goodness boot animation, then goes black. I left it sitting for 30 min and nothing. Did a battery pull and nothing. So finally, I tried to get back into recovery mode and i cant. I hold volume up+home+power and the phone displays the blue script that shows recovery, then the samsung logo, then boots right back into the Goodness boot animation. How can I get back into twrp? Ive searched high and low for answers but cannot seem to find the answers to my problem. Thanks
Can you get into download mode? If so, reflash your recovery and try again.
Did you wipe in between flashes?
message brought to you by my GalaxyS3
CNexus said:
Can you get into download mode? If so, reflash your recovery and try again.
Click to expand...
Click to collapse
it pops up until I let go of the buttons then it goes back to the boot animation
joeyhdownsouth said:
Did you wipe in between flashes?
message brought to you by my GalaxyS3
Click to expand...
Click to collapse
between hyperdrive and carbon I did a full wipe. Between carbon and Goodness I didnt. i figured I would be ok since I installed nothing but the os and gapps. I had done it other times with no problems and figured this time would be the same.
total mayhem said:
between hyperdrive and carbon I did a full wipe. Between carbon and Goodness I didnt. i figured I would be ok since I installed nothing but the os and gapps. I had done it other times with no problems and figured this time would be the same.
Click to expand...
Click to collapse
When you get to goodness boot animation does it not complete and the phone start the process over again?
Sent from the future via Tapatalk 4
edfunkycold said:
When you get to goodness boot animation does it not complete and the phone start the process over again?
Sent from the future via Tapatalk 4
Click to expand...
Click to collapse
Well I was able to unroot and re root my phone again. To answer the question though the boot animation would go on for 20-30 seconds and then the screen would stay black. No noise, no touch control, no indication that the power was on. When placed on the charger, the led wouldn't even display.
So is it all working now?
Sent from the future via Tapatalk 4
edfunkycold said:
So is it all working now?
Sent from the future via Tapatalk 4
Click to expand...
Click to collapse
Yes phone if now working. I'm going to try and reflash goodness again and see what happens
total mayhem said:
Yes phone if now working. I'm going to try and reflash goodness again and see what happens
Click to expand...
Click to collapse
Make sure you redownload it, just in case it was a bad download.. you never know. I know it is time consuming but worth it.
------------------------
Sprint Galaxy S3 "Supernexus"
Whiplashh Rom
Look it up.
there have been a few cases where for some reason the boot animation wouldnt start although the device was booting. simulating the " black screen ". this also has happend to me several times on a " first boot "......id try letting it sit for a few min. if it doesnt finaly boot, then just whipe whipe whipe.....reflash..and possibly redownload and reflash...
Sent from my SPH-L710 using xda app-developers app
after flashing rom to my lenovo s920 row i see the black screreen n device is vibrating but not responding if i remove the battery n reconnect agai than only it will responding so what can i do.
hitendra002 said:
after flashing rom to my lenovo s920 row i see the black screreen n device is vibrating but not responding if i remove the battery n reconnect agai than only it will responding so what can i do.
Click to expand...
Click to collapse
Wrong forum, wrong thread. Go start a new thread in the appropriate forum.
Guys. What should I do about the gray triangle with a wrench and a screwdriver forming a cross with a blue progress bar below? Everytime I turn my phone off, when it starts the triangle shows up. I've waited for it for an hour but nothing happened. Good thing though, I made a backup for the data, boot and all that stuff in TWRP. But when my phone shuts down normally, the problem (gray triangle) happens again. What should I do? Really need help.. Thanks in advance, guys.
Using stock .96 rom but I'm planning to flash existenz black v2 later.
I had similar problem with stock ROM but also with some unofficial ROMs. When I used many aplications or play games and my mobile getting slower I rebooted it and than triangle appeared. But after few seconds it disappeared.
Mine just keeps on going even after a few hard resets. Damn man. I really don't know what to do with this.
itsmarc19 said:
Mine just keeps on going even after a few hard resets. Damn man. I really don't know what to do with this.
Click to expand...
Click to collapse
Try doing a clean flash of any stock based ROM. and when first time the triangle comes just wait for it to disappear..
just after installing a new ROM don't install any apps just wait for 5 min and do a restart.. den use your phone normally. Hope it helps.
anikesh102 said:
Try doing a clean flash of any stock based ROM. and when first time the triangle comes just wait for it to disappear..
just after installing a new ROM don't install any apps just wait for 5 min and do a restart.. den use your phone normally. Hope it helps.
Click to expand...
Click to collapse
I did try that, flashing the stock rom for .96 but to no avail still Now I'm just keeping my phone alive at all cost because if it shuts down normally (using the power button), the gray thing shows up again
I recently flashed the official CM12 build using recovery to my YU Yureka device.
There's a new issue that I've encountered. Everytime I boot my device , just after boot animation, "Android is upgrading... Starting apps" shows up. It does its animation for about 10 seconds to resume the boot afterwards. First of all, I don't think that is normal at all. It is expected on first boot but not on every boot. Is there any solution to this?
In general the performance has suffered a lot. The AnTuTu Benchmark scores have dropped from ~29000 in KitKat to about ~21000 for Lollipop. The interface is laggy and unresponsive at times.
I've tried cleaning the cache partition from the stock recovery menu too with no effect or change whatsoever.
(Been using the CM12 for about 8hrs + now)
EDIT: Issue resolved by factory reset from the recovery. Do make sure to take backup of all the apps and contacts before doing a factory reset. The dialog box at boot up screen is now gone.
Even though new AnTuTu scores are not as high as other users have been reporting (~32000) but around ~29000. Also, device feels more smooth and responsive.
It happened with me also!
Its normal
In the start it lags!
But after it gets settled it just a treat
If it dosent dissapear den factory reset it!
rahulsingh616 said:
It happened with me also!
Its normal
In the start it lags!
But after it gets settled it just a treat
If it dosent dissapear den factory reset it!
Click to expand...
Click to collapse
For how long have you been using this? And approximately, after how long your system was normal again?
As i finished rooting and resroring all my apps!
About 2 hours later!
Antutu score 34000+