Bricked (stuck at startup screen where the Jelly guy flies into space) my LG P930 on JellyBam 3.2.0, it was previously running CM10 Stable and I followed the install instructions correctly. I've worked with 3 phones over the past 3 years and this is the first time I've had a brick, can anyone help? Don't even know how to get into recovery mode from here.
unbrick
http://forum.xda-developers.com/showthread.php?t=1784709
follow this u b fine
adamm1 said:
Bricked (stuck at startup screen where the Jelly guy flies into space) my LG P930 on JellyBam 3.2.0, it was previously running CM10 Stable and I followed the install instructions correctly. I've worked with 3 phones over the past 3 years and this is the first time I've had a brick, can anyone help? Don't even know how to get into recovery mode from here.
Click to expand...
Click to collapse
That happens to me every time I flash jellybam. Just turn it off by holding the power button and then turn it back on.
Sent from my LG-P930 using xda premium
mattman86 said:
That happens to me every time I flash jellybam. Just turn it off by holding the power button and then turn it back on.
Sent from my LG-P930 using xda premium
Click to expand...
Click to collapse
Didn't work for me, looks like I'm back to Odin and another ROM
Try this. might help
I stumbled upon the same stone as u did...I tried reflashing Jellybam 3.0.0 many times.. didnt help.. stuck at the Jellybam boot animation..
What did the trick for me is I installed the HO!NO atomic Rom and then flashed the Jellybam.. works like a charm.. only thing I noticed is that after flashing the HO!NO ROM, the baseband version lists as "Unknown" not really a problem as Jellybam is working real smooth...
Would have loved the battery performance to be better though as I was getting better backup on V20C official ICS.. all the best,
reddevil_sen said:
I stumbled upon the same stone as u did...I tried reflashing Jellybam 3.0.0 many times.. didnt help.. stuck at the Jellybam boot animation..
What did the trick for me is I installed the HO!NO atomic Rom and then flashed the Jellybam.. works like a charm.. only thing I noticed is that after flashing the HO!NO ROM, the baseband version lists as "Unknown" not really a problem as Jellybam is working real smooth...
Would have loved the battery performance to be better though as I was getting better backup on V20C official ICS.. all the best,
Click to expand...
Click to collapse
Did you ever try pulling the battery and attempting to start the phone again? Like mattman said, every single time I flash JellyBam it boot loops on the initial boot. A battery pull (or just hold the power button for like 15 seconds) and it boots up without incident.
lordcheeto03 said:
Did you ever try pulling the battery and attempting to start the phone again? Like mattman said, every single time I flash JellyBam it boot loops on the initial boot. A battery pull (or just hold the power button for like 15 seconds) and it boots up without incident.
Click to expand...
Click to collapse
No response, it would be nice if this member would come back to give a clue if he/she is still stuck or what they did to fix the issue so others who may come across this would know what to do?
Yes I did....
lordcheeto03 said:
Did you ever try pulling the battery and attempting to start the phone again? Like mattman said, every single time I flash JellyBam it boot loops on the initial boot. A battery pull (or just hold the power button for like 15 seconds) and it boots up without incident.
Click to expand...
Click to collapse
Yes, I did remove the battery and tried to boot 3-4 times to no avail.. then installed Ho!Nos HyperSonic and then Jellybam which worked..
Reply
The battery solution did not work. Will not get the time to go through the unbricking process, definitely got screwed here oh well.
Related
Recently flashed [ROM][4.1.1][AOSP] Liquid Smooth - Jelly Bean [Beta1] and can't get past boot screen. Any help would be greatly appreciated! I'm on a Verizon Galaxy Nexus.
How long are you waiting? It can sometimes take a few minutes just to get past the Google splash screen.
Cilraaz said:
How long are you waiting? It can sometimes take a few minutes just to get past the Google splash screen.
Click to expand...
Click to collapse
it sat for about 5 minutes. I took the battery out once, and now it's been there for about 5 more...
bpark32 said:
it sat for about 5 minutes. I took the battery out once, and now it's been there for about 5 more...
Click to expand...
Click to collapse
I'd let it sit for double that, just to be sure, and/or grab a logcat.
Cilraaz said:
I'd let it sit for double that, just to be sure, and/or grab a logcat.
Click to expand...
Click to collapse
Had to factory reset/wipe cache again and then it worked...
Thanks anyways.
I've had the same issue with every JB Rom I've tried out. It always eventually boots (5 min or so) but it occurs on every reboot. This happened on two other Jelly Bean roms until I flashed one of the stock kernels. Then it would only happen once every 5+ reboots. With the Liquid rom I tried flashing the same stock kernel (Linaro), and it would freeze permanently on the "X" Jelly Bean logo that appears after the google screen. So I went back to the kernel that came with Liquid. I've wiped everything that could be wiped and formatted many times over. I've been reading through the threads here, and it seems like most people only have this issue on the second boot. Anyone else experiencing the hang up every time?
did you wipe before you flashed the rom?
I suggest to flash super wiper before flash ur target rom from android HD revolution everytime you install one different ROM , i never had issue.
Sent from my Galaxy Nexus
Couldn't post under the Asylum thread so hear goes........ Noob, not enough posts yet it seems.
Rooted Galaxy S3 i747M Telus ..... was working great until flashing Asylum CM10. CWM said it successfully flashed the ROM. However, upon rebooting the phone the normal Samsung stuff came up and the Asylum opening screen begins its thing and just continues to loop. It's been looping for about 3 hours now.......
Any suggestions on how to proceed would be greatly appreciated.
Jugula said:
Couldn't post under the Asylum thread so hear goes........ Noob, not enough posts yet it seems.
Rooted Galaxy S3 i747M Telus ..... was working great until flashing Asylum CM10. CWM said it successfully flashed the ROM. However, upon rebooting the phone the normal Samsung stuff came up and the Asylum opening screen begins its thing and just continues to loop. It's been looping for about 3 hours now.......
Any suggestions on how to proceed would be greatly appreciated.
Click to expand...
Click to collapse
By Asylum I assume you mean the spinning CM10 logo on startup?
It is recommended that you do a FULL backup of your data then a full wipe back to factory settings on your device before upgrading to CM10. Now, if you get into recovery mode, you can do a wipe and that should fix it. Maybe reflash after the wipe.
greenglue said:
By Asylum I assume you mean the spinning CM10 logo on startup?
It is recommended that you do a FULL backup of your data then a full wipe back to factory settings on your device before upgrading to CM10. Now, if you get into recovery mode, you can do a wipe and that should fix it. Maybe reflash after the wipe.
Click to expand...
Click to collapse
I'll give it a try when I sober up and get back to you.
Jugula said:
I'll give it a try when I sober up and get back to you.
Click to expand...
Click to collapse
Well it worked... I guess the phone was in what folks call a boot loop. After the data wipe, the phone booted up as it normally should,
Many thanks.....
Jugula said:
Well it worked... I guess the phone was in what folks call a boot loop. After the data wipe, the phone booted up as it normally should,
Many thanks.....
Click to expand...
Click to collapse
No problem! Glad I helped. Sometimes some files can't upgrade properly so that's why it happens as they corrupt.
Facing CyanogenMod Boot logo Loop
greenglue said:
No problem! Glad I helped. Sometimes some files can't upgrade properly so that's why it happens as they corrupt.
Click to expand...
Click to collapse
I am facing the same problem, the steps you mentioned unfortunately did not work ??
How to resolve this problem ?
trouble
the logo just spins around and around no boot how do i get to recoverymode at this point
samuelreal02 said:
the logo just spins around and around no boot how do i get to recoverymode at this point
Click to expand...
Click to collapse
volume up+power+home button when you see the samsung logo flash on the screen let go of power button but still hold volume up +home button also no you know you are in the att section not verizon
Hey everyone I have a problem that I sort of fixed but not really? About 2 days ago my phone kept restarting and vibrating. I researched the problem and it said that it might be a stuck button problem. After a few hours I came to the conclusion that a stuck power button was the problem. I went to a cell phone repair shop and had it repaired. IT worked fine on the way home but then I got home and set it on the counter only to come back to it restarting and vibrating all over again. How is that possible after replacing the power button I though. So I did my best and I was able to flash the stock 4.1.2 rom back onto my phone and unroot it and everything. Now my phone has been working fine ever since. Could it be that I cant flash roms anymore? Does anyone know what the real problem to my phone is? If so please respond here. Thank you very much for you're time.
Jyjieng11 said:
Hey everyone I have a problem that I sort of fixed but not really? About 2 days ago my phone kept restarting and vibrating. I researched the problem and it said that it might be a stuck button problem. After a few hours I came to the conclusion that a stuck power button was the problem. I went to a cell phone repair shop and had it repaired. IT worked fine on the way home but then I got home and set it on the counter only to come back to it restarting and vibrating all over again. How is that possible after replacing the power button I though. So I did my best and I was able to flash the stock 4.1.2 rom back onto my phone and unroot it and everything. Now my phone has been working fine ever since. Could it be that I cant flash roms anymore? Does anyone know what the real problem to my phone is? If so please respond here. Thank you very much for you're time.
Click to expand...
Click to collapse
If your phone is functioning normally.....there's no reason why you can't flash any rom made for our phone.
Sent from my cell phone telephone....
The problem is that everytime I flash a custom rom my home button goes crazy and makes the rom un-usable. I have flashed both JMT and Slimrom on my phone and bot ended in the same result.
Jyjieng11 said:
The problem is that everytime I flash a custom rom my home button goes crazy and makes the rom un-usable. I have flashed both JMT and Slimrom on my phone and bot ended in the same result.
Click to expand...
Click to collapse
It sounds more like boot loops which can happen often if you look thru the forums. Your buttons either work or they don't. What rom you are on plays no part in hardware issues like that.
Just be sure when trying a rom, you follow the instructions to the letter. Otherwise boot loops can easily happen.
Sent from my cell phone telephone....
kj2112 said:
It sounds more like boot loops which can happen often if you look thru the forums. Your buttons either work or they don't. What rom you are on plays no part in hardware issues like that.
Just be sure when trying a rom, you follow the instructions to the letter. Otherwise boot loops can easily happen.
Sent from my cell phone telephone....
Click to expand...
Click to collapse
It couldnt have been a bootloop because it was working just fine for a while after flashing and then later on I set it on the table to come back to it flashing where it kept unlocking and locking and unlocking. I was unable to do anything with the phone at the time and after a while it kept restarting and vibrating. You dont think its hardware issues?
Hey everyone. I cannot find any information specific to my phone. I have the Galaxy SII Hercules, and I've been trying to get Cyanogen Mod 10 on it. I rooted it just fine, everything worked great. I flashed the CWM Recovery, ran super wipe and super cache wipe after installing the mod. Everything was fine. But then the next day, the phone just died with 75% power left and got stuck rebooting over and over. If I take the battery out, it will let me go into recovery, but then the power button is selecting options without me touching it.
If I unroot the phone and go back to stock, the power button works fine when selecting options in the stock recovery, and the boot loop stops. I cannot find anyone who will tell me what's causing this, or how to fix it, other than "YOu have a loose power button!" But then, why have I not had the problem at all using stock? I prefere the way my phone was working on CM10, especially the better battery life and radio reception.
OK. Well, I managed to find information on google. For some reason searching the forums here doesn't yield results other than finding another poster with the same problem. It seems the version of clockwork recovery I was using would cause the issue. I flashed and rooted with twrp 2.4.4.0 (2.5.5.0 would not finish flashing in odin mode for some reason) and everything is running fine so far. But its only been a couple hours.
SGH-T989 / CM 10.0.0.0 Hercules
ThatBillmanGuy said:
OK. Well, I managed to find information on google. For some reason searching the forums here doesn't yield results other than finding another poster with the same problem. It seems the version of clockwork recovery I was using would cause the issue. I flashed and rooted with twrp 2.4.4.0 (2.5.5.0 would not finish flashing in odin mode for some reason) and everything is running fine so far. But its only been a couple hours.
Click to expand...
Click to collapse
Hopefully your post can help other people. If you try to use those super wipe scripts with CWM 6 you will have major problems. Only use them if you are on CWM 5.0.2.7.
Doing fine after 36 hours. The battery life is 8 hours, 15 minutes with WiFi and GPS on the whole time. It did have a black screen earlier with the four home keys along the bottom lit up. I had to take the battery out, but it came back up no problem. Only glitch so far.
SGH-T989 / CM 10.0.0.0 Hercules
I was running the new version of Hyperdrive until the mms stop sending so I decided to go to Goodness. Originally I could not get any rom to flash from the internal or external memory, so I pulled the sd card wiped everything and reinstalled my backup of carbon from trwp. After I confirmed the phone was working properly , i downloaded and placed goodness onto my internal memory (ext sd is not in right now) , and flashed no problem. Now the phone boots the Samsung logo, the goes into the Goodness boot animation, then goes black. I left it sitting for 30 min and nothing. Did a battery pull and nothing. So finally, I tried to get back into recovery mode and i cant. I hold volume up+home+power and the phone displays the blue script that shows recovery, then the samsung logo, then boots right back into the Goodness boot animation. How can I get back into twrp? Ive searched high and low for answers but cannot seem to find the answers to my problem. Thanks
Can you get into download mode? If so, reflash your recovery and try again.
Did you wipe in between flashes?
message brought to you by my GalaxyS3
CNexus said:
Can you get into download mode? If so, reflash your recovery and try again.
Click to expand...
Click to collapse
it pops up until I let go of the buttons then it goes back to the boot animation
joeyhdownsouth said:
Did you wipe in between flashes?
message brought to you by my GalaxyS3
Click to expand...
Click to collapse
between hyperdrive and carbon I did a full wipe. Between carbon and Goodness I didnt. i figured I would be ok since I installed nothing but the os and gapps. I had done it other times with no problems and figured this time would be the same.
total mayhem said:
between hyperdrive and carbon I did a full wipe. Between carbon and Goodness I didnt. i figured I would be ok since I installed nothing but the os and gapps. I had done it other times with no problems and figured this time would be the same.
Click to expand...
Click to collapse
When you get to goodness boot animation does it not complete and the phone start the process over again?
Sent from the future via Tapatalk 4
edfunkycold said:
When you get to goodness boot animation does it not complete and the phone start the process over again?
Sent from the future via Tapatalk 4
Click to expand...
Click to collapse
Well I was able to unroot and re root my phone again. To answer the question though the boot animation would go on for 20-30 seconds and then the screen would stay black. No noise, no touch control, no indication that the power was on. When placed on the charger, the led wouldn't even display.
So is it all working now?
Sent from the future via Tapatalk 4
edfunkycold said:
So is it all working now?
Sent from the future via Tapatalk 4
Click to expand...
Click to collapse
Yes phone if now working. I'm going to try and reflash goodness again and see what happens
total mayhem said:
Yes phone if now working. I'm going to try and reflash goodness again and see what happens
Click to expand...
Click to collapse
Make sure you redownload it, just in case it was a bad download.. you never know. I know it is time consuming but worth it.
------------------------
Sprint Galaxy S3 "Supernexus"
Whiplashh Rom
Look it up.
there have been a few cases where for some reason the boot animation wouldnt start although the device was booting. simulating the " black screen ". this also has happend to me several times on a " first boot "......id try letting it sit for a few min. if it doesnt finaly boot, then just whipe whipe whipe.....reflash..and possibly redownload and reflash...
Sent from my SPH-L710 using xda app-developers app
after flashing rom to my lenovo s920 row i see the black screreen n device is vibrating but not responding if i remove the battery n reconnect agai than only it will responding so what can i do.
hitendra002 said:
after flashing rom to my lenovo s920 row i see the black screreen n device is vibrating but not responding if i remove the battery n reconnect agai than only it will responding so what can i do.
Click to expand...
Click to collapse
Wrong forum, wrong thread. Go start a new thread in the appropriate forum.