I tried the "AT&T Software Updates" link in my Tilt2s -> Start->Settings->System page. I got this:
"A recommended device management task from https://mdm.mycingular.net/opm/ht/omadm/dm is available to maintain your device. This task requires a data connection. Do you want to connect and begin the task?"
I hit No and got out - just curious what is this? Has anyone hit yes and seen what happens?
I hit yes and then it started trying to do something but failed with an error. I just left it at that.
While I was on the AT&T ROM, I also got an error when I hit yes. Something about not being able to contact the server or whatnot.
I got the same problem. When I hit Yes, nothing happens. When I close the application, I have a text message that a connection to the server cannot be established. Had the same problem with the "stocks" tab - it wouldn't connect, but it began to work miraculously a few days ago.
Related
My stock Tilt2 has all of a sudden given me problems with the data connection. It tells me when I try to open apps such as FIM or the Weatherbug app that I don't have a data connection and I need to refresh it. I click refresh and still no luck. The thing is, it shows that MEdia net is connected. I can use the internet without any problems, though. It just seems to be when I run an app that required connectivity that it doesn't work. It also gave the the error when I tried to update the quickGPS function today.
Any ideas? Thanks in advance!
Any experience this?
I'm sure someone knows what is going on.
I also could not get the Bing app to work right. I could not locate me (even through GPS), therefore could not search for anything nearby. I then downloaded the Google Maps app, and it worked fine! WTF???
Try Settings-Connections-Connection Setup.
That doesn't change a thing......
I don't know what happened. I just tried downloading a new app that also gave me a "failed connection".
Anyone have a clue?
sethjamto said:
That doesn't change a thing......
I don't know what happened. I just tried downloading a new app that also gave me a "failed connection".
Anyone have a clue?
Click to expand...
Click to collapse
Is anyone reading this thread? I'm sure someone on here could walk me through this!
Anyone? PLEASE?? Do I have to beg??
sethjamto said:
Is anyone reading this thread? I'm sure someone on here could walk me through this!
Anyone? PLEASE?? Do I have to beg??
Click to expand...
Click to collapse
You'll need to search in the forums here for the correct network settings based on what carrier you're with (T-mobile, Sprint, Vodaphone, etc), and go through them and correct whichever of yours have gotten set wrong.
sirphunkee said:
You'll need to search in the forums here for the correct network settings based on what carrier you're with (T-mobile, Sprint, Vodaphone, etc), and go through them and correct whichever of yours have gotten set wrong.
Click to expand...
Click to collapse
I tried this last night and believe that all my settings are correct. (AT&T)
The internet runs fine using IE or Opera, it only appears to be apps that access the internet, such as the WeatherBug app, FIM, etc. FIM works to see things such as Status updates, etc, but it says "Failed using the internet connectio. Try to restart your data connection" and won't allow me to see who is online on the main page. Everything else thru FIM works fine.
The Weatherbug app gave me a similar error message and would not load any weather data or forecasts.
Here is what I have set, ya'll let me know if things are good.
Start/Settings/Connections/Advanced Network/
I have "Enable HSDPA/HSUPA" selected.
CHAP authentication is selected
CSD Line Type: Data rate 9600 bps(v.32)
Connection element: non-transparent
Start/Settings/Connections/Connections/
Advanced: Network Management:
Programs that automatically connect use: MEdia Net
Programs that connect via Private use: MEdia Net
Under the Wireless Manager, both the "Phone" and "Data Connection" are turned on, everything else is off (and has been since I got the phone. The apps listed above worked this way also before).
I have also gone thru Start/Tools/Proxy Manager/ and done the Restore Proxy as suggested on other threads.
I am at a loss......a Hard Reset is my last resort, as I will have to go through my business to download the Good.com software again to get my work emails going (not that it is a hard thing to do.....)
FYI, I am running the stock AT&T ROM also.
Lastly..... if I did do a hard reset and decided to flash a cooked ROM, could I still run the Good.com Mobile Messaging software for my work email??
Thanks in advance!
I'm on AT&T in Michigan & my GPRS authentication is set "PAP Authentication"
I've tried both with no change in my original problem.
sethjamto said:
I tried this last night and believe that all my settings are correct. (AT&T)
The internet runs fine using IE or Opera, it only appears to be apps that access the internet, such as the WeatherBug app, FIM, etc. FIM works to see things such as Status updates, etc, but it says "Failed using the internet connectio. Try to restart your data connection" and won't allow me to see who is online on the main page. Everything else thru FIM works fine.
The Weatherbug app gave me a similar error message and would not load any weather data or forecasts.
Here is what I have set, ya'll let me know if things are good.
Start/Settings/Connections/Advanced Network/
I have "Enable HSDPA/HSUPA" selected.
CHAP authentication is selected
CSD Line Type: Data rate 9600 bps(v.32)
Connection element: non-transparent
Start/Settings/Connections/Connections/
Advanced: Network Management:
Programs that automatically connect use: MEdia Net
Programs that connect via Private use: MEdia Net
Under the Wireless Manager, both the "Phone" and "Data Connection" are turned on, everything else is off (and has been since I got the phone. The apps listed above worked this way also before).
I have also gone thru Start/Tools/Proxy Manager/ and done the Restore Proxy as suggested on other threads.
I am at a loss......a Hard Reset is my last resort, as I will have to go through my business to download the Good.com software again to get my work emails going (not that it is a hard thing to do.....)
FYI, I am running the stock AT&T ROM also.
Lastly..... if I did do a hard reset and decided to flash a cooked ROM, could I still run the Good.com Mobile Messaging software for my work email??
Thanks in advance!
Click to expand...
Click to collapse
Bump to top for help!
sethjamto said:
Bump to top for help!
Click to expand...
Click to collapse
Anyone solve this? I've been having similar problems... WIFI internet sharing lost the relationship to MEdia Net, but Opera and IE work just fine. Now Google Maps won't work, says there's no data network. ANd now, MMS picture messages won't work, says "Proxy Error".
I don't screw with the settings. Ever.
?????
I was having a similar problem with the data side of it. After talking to tech support at AT&T and HTC, no help there, I changed the setting from Enable HSDPA/HSUPA to Enable HSDPA only. Data problem appears to be fixed over 3g anyway. I haven't been using it long enough to say it is ACTUALLY fixed still but it's working at the moment which is more than moments ago.
The title pretty much says it all. I tried searching and didnt find a matching issue....I have a Tilt2 (ATT) stock rom.
Yesterday I had issues with hotmail via Windows Live. I would log in and the folders/mail would sync fine. The very next action I took using data would fail (sending an email, another sync/send/receive, using IE-Opera, facebook). The action/request would timeout with a "no network connection".
Most of the time I can access the web/mail by recycling the power. But as before, it quickly loses the connection again.
I spent over an hour with support and tech yesterday. No answers or ideas, just a suggestion I have the device switched out with the ''warranty" dept (which would make it my 5th Tilt2!!!!).
I'm actually waiting to see what android phones come out. I love the keyboard, but dont want to install a custom rom for fear of voiding the warranty and have way too many issues. In the meantime, any ideas on my network issue would be most appreciated.
bump.....
No ideas at all???
Try a FULL HARD RESET.
To perform a hard reset
Access the Settings Tab>All Settings>System>Clear Storage
Follow the onscreen instructions.
OR I believe it's pressing the SEND/END key + Holding down the POWER button and hitting the reset hole should do it. Then VOLUME UP button when asked 'are yo sure' --or something like that.
Let the PHONE install whatever it needs. Once stable, try setting up 1 email account and see what happens.
(Outside of the major network issue I'm having).....a few weeks back I tried the "AT&T Software Update" icon under settings. It gave me the message "A Recommended device management task from mdm.mycingular.net/opm/ht/omadm/dm is available to maintain your device. Do you want to connect to begin?"
I tried 'yes' with nothing having happened after a quick download. I went back into the update icon expecting to see a different option, only to find the same thing.
Either it never updated, or failed somehow, or the whole update section is flawed. Anyone else? I'm more curious at this point, wondering if this did anything to my phone (though being a few weeks back, am hoping it didn't have any effect on my current data issues)
So I got a Galaxy Tab 3 for free with my new Galaxy S5 yesterday. And on the notification bar there is a prompt saying preparing network. I have full bars on the signal but have no connection to the network. I tried rebooting, turning on airplane mode and trying to reboot the signal. But have no luck.
Is there anything that I can try to fix this? The Tab is stock and I haven't changed anything yet...
Any help would be great!!
Which tab 3 model?
Are you on the "right" network? Does you network have a hidden SSID? Are you using any security on the network? Check the network settings on your PC and copy them to the tab. If you are not sure, then open your network and see if the tab connects. If so, then you can close the network again.
I have the same issue but mine is working all networks. It started when I tried to connect to a new wifi at a wing place and the icon has been on ever since.
Same problem
So no one has any info or any suggestions? Nothing? Also I'm on Sprint.
I havent figured out anything , I have tried messing with sync and wifi options and nothing has changed.
I have looked at all the "Tab 3" devices since you did not indicate what model you have. With that in mind the search is very broad and data found could/could not be affecting your connectivity. But this is what I found.
All Tab 3, except Tab 3 Lite 7, use 802.11 a/b/g/n WLAN Standards. The Tab 3 Lite 7 only has 802.11 b/g/n. Why? I don't know.
So, make sure that your location has one of the three, 802.11 b/g/n working. You tab should auto acquire unless you have a setting that is specifically looking for a unique channel. Confirm all your parameters and the parameters of the WiFi source.
tab 3 prepping service solved
Ok so got 2 tab 3s from sprint today and same issue. To resolve this.......they are not activated! Run on wifi and go to settings and at the bottom left it will show a small phone icon and say activate this device. Click on that and let the live activation happen. The tab 3 will then reset and function on sprint networks!
Ok so that takes care of it initially and then it comes back on switching to and from wifi. You can get rid of the icon by going into the app manager, select all apps, and force stop samsung dm. Looks like it is a samsung software issue to me!
Man, the folks at Sprint aren't even aware of the issue yet. My Tab3 just sat there and wouldn't activate or connect at power on. So I have to skip all setup and go to activate in settings and it activated. Tried a factory restore so I could do setup again and no connection again and the preparing network problem. Switching to CDMA works. On the phone with support for like 30 minutes and they couldn't see my device on the network at all even while on LTE. Thanks for service reference. I was going to return this unit until I saw it was a software issue. It makes for a nasty setup/activation with no wifi around.
Sometimes activation fails and just gives a LTE error, sometimes it fails and sends data usage stats. When it completes it posts a backup pin and phone number. I'm guessing this happens with store pickups because they let it update on powering it up and that broken service starts messing things up.
Go to settings and then to activate this device and as soon as it starts to try and activate its self press the volume down 4 times and then you will see a screen that says IQTHiddenMenu....Scroll down to LTE mode and select it you will see a screen thatb has four boxes on it...select the one that says "enable LTE Mode" after you selct that then just hit back button a few times and let it try and activate again and this should fix your issues. You may have to do this twice. For the last 2 weeks this has been the only way we can activate anyones tablet is using this method, it has somehting to do with our Network not communicating properly with the Tablet.
Hope this helps.
megan23247 said:
Go to settings and then to activate this device and as soon as it starts to try and activate its self press the volume down 4 times and then you will see a screen that says IQTHiddenMenu....Scroll down to LTE mode and select it you will see a screen thatb has four boxes on it...select the one that says "enable LTE Mode" after you selct that then just hit back button a few times and let it try and activate again and this should fix your issues. You may have to do this twice. For the last 2 weeks this has been the only way we can activate anyones tablet is using this method, it has somehting to do with our Network not communicating properly with the Tablet.
Hope this helps.
Click to expand...
Click to collapse
Hidden screens. One has to love technology. So then one also has to ask, what else is the tablet doing that we do not know about? Reporting back to the mother ship?
Solution
So I had this same problem and I called sprint today and they were able to help me. THIS WILL RESET YOUR TAB AND YOU WILL LOSE EVERYTHING ON IT. Make sure to back up if you have anything important.
You have to open the calculator and type (+30012012732+ when the next screen pops up, type ##786#, the RTN menu will open, press Reset, it will ask you for your MSL, type it in and that will do it. Hope it helps.
BTW you will have to find a way to find your MSL as I never had to. I'm sure if you call your carrier they will give it to you once you tell them why you need it.
megan23247 said:
Go to settings and then to activate this device and as soon as it starts to try and activate its self press the volume down 4 times and then you will see a screen that says IQTHiddenMenu....Scroll down to LTE mode and select it you will see a screen thatb has four boxes on it...select the one that says "enable LTE Mode" after you selct that then just hit back button a few times and let it try and activate again and this should fix your issues. You may have to do this twice. For the last 2 weeks this has been the only way we can activate anyones tablet is using this method, it has somehting to do with our Network not communicating properly with the Tablet.
Hope this helps.
Click to expand...
Click to collapse
Looks like they are still having this issue. Mine was stuck on Preparing network. 3G and wifi worked, but no LTE or GPS. I did the hidden menu trick and now that all works, but I still have the "preparing network" notification. Is there any way to remove this? Could I do a ##RTN to clear network configs, then enable LTE through hidden menu, then activate?
Something to try that worked for me for the time being
I just thought I would share with anyone else having issues with the persistent Preparing Network message.
If you go to Settings>Activate Device and launch the Self Service application, there is a hidden menu accessible via the Menu Key, And you can then choose Reset Cellular Data.
Your device will then reboot, and it will go through Self Provisioning when it reboots.
I Had to do this twice, and 2nd time seems to have been the charm this time as the Preparing Network Message is gone!
Finally got rid of "Preparing Network"!
rastassjr said:
I just thought I would share with anyone else having issues with the persistent Preparing Network message.
If you go to Settings>Activate Device and launch the Self Service application, there is a hidden menu accessible via the Menu Key, And you can then choose Reset Cellular Data.
Your device will then reboot, and it will go through Self Provisioning when it reboots.
I Had to do this twice, and 2nd time seems to have been the charm this time as the Preparing Network Message is gone!
Click to expand...
Click to collapse
I spent 2 hours on with Sprint live chat, did a Kies reset, software hard reset, and everything else I could find...yet this solution was the simplest and the only one that actually worked!
Someone let Sprint support know how to fix their own device, please!
Thank you rastassjr, you saved me a trip to the Sprint store.
This is a common problem with an easy fix.* Long press the notification on the task manager.* A button will appear saying APP INFO.* Press that and you will see the app info page.* Clear the cache and data and more inportantly, deselect the notification checkmark.* Thats it!...*
OTA 4.4.2
Just got it on a new SG Tab3 7" and it cleared the "Preparing Network" icon. I had done a MSL reset yesterday and it had cleared it before I bricked it. I returned it, got a new one and it cleared it on its own after the 4.4.2 update.
Solved!
I solved mine after several weeks. First, oddly enough this error was preventing me from getting the 4.4.2 android update and the system said the operating system was up to date on 4.2. You need to download the samsung Kies program into your computer and perform a manual firmware update. The system will tell you that indeed you have the latest update but you'll do it any way. Once the OS is reinstalled, you will see that the PRL will be updated properly, which is the reazon for this problem. Then the system will allows you to receive the 4.4.2 upgrade which does not suffer from this problem. The key is to upgrade to android 4.4.2.
Hello, folks. Just picked up a Tab S4 from Best Buy and I'm having a weird issue. Straight out of the box, software update would not work. When I attempt to update manually, it just sits there and spins on "Registering Device" for several minutes, then briefly displays a "registration failed" message and times out.
I finally managed to update to pie using Samsung Switch and it's still doing it. I already tried resetting settings. I haven't wiped it yet, but it was brand new out of the box and doing this immediately, so I don't see how that would resolve it. It just flat refuses to look for updates.
I suppose Samsung's software registration server could be down right now or something. Has anyone else seen this issue? I'm wondering if I should just return it.
greyhulk said:
Hello, folks. Just picked up a Tab S4 from Best Buy and I'm having a weird issue. Straight out of the box, software update would not work. When I attempt to update manually, it just sits there and spins on "Registering Device" for several minutes, then briefly displays a "registration failed" message and times out.
I finally managed to update to pie using Samsung Switch and it's still doing it. I already tried resetting settings. I haven't wiped it yet, but it was brand new out of the box and doing this immediately, so I don't see how that would resolve it. It just flat refuses to look for updates.
I suppose Samsung's software registration server could be down right now or something. Has anyone else seen this issue? I'm wondering if I should just return it.
Click to expand...
Click to collapse
Wipe it. Something is funky. Just do a factory reset and see. Whats the harm? If that doesn't work then go get exchange
Well, I completely wiped it and the issue is still there. It just sits there spinning at "Registering device", then times out after several minutes.
The rest of the tablet works fine, but I can't help but thing this shouldn't be happening at all on a new tablet, especially after I manually updated it to Pie using Samsung Flow. I was hoping that would fix it.