Develop Bugs

Imate JJ ROM on O2 Xda Exec

I recently upgraded my O2 Xda Exec with the imate JJ rom (ROM Version: 1.30.82 WWE). But after a hard reset, I keep getting the following error:
Code:
Can not run on this device.
Upon investigating, I have discovered that the pocket arabizer cabs are installed during the customization after a hard reset. The similar rom (and the mentioned cabs) are working flawlessly on my other universal (imate jasjar) but on my O2, i keep getting the above error (i.e. can not run on this device). Is there a way to get the arabizer cabs to working nicely with my O2? Help in this regard would be appreciated.

help, please help. just say something. just kiddin'
hopefully, someone will come along and offer some valuable help.

T-Mobile is doing the same thing
My T-Mobile MDA Pro is doing the sme thing, it must be a way to tell the ROM that my T-Mobile is a JasJar...and I have used the "no_ID" and it did not work...
HELP

The imate roms (dont know if only from the Jasjar) have something builtin (don't know if cab file in extrom or in the rom itself) that only allows installation on imate jasjars. I think its some sort of list or program which checks the imei.

My observations so far are:
1. I have tried a custom extended rom, specially designed to avoid any cabs that might check the imei. This meant using a custom config file and autorun file from O2.
2. Only IMEI checking cab I have found so far is the 'Default_CAAVPPC_IMEI_2.6.80_range.cab' -- it is CA Antivirus software. I think it checks the IMEI.
3. I have tried with certain telco provided cabs (e.g. Mobily, Etisalat_UAE, etc.), to see if this works. It doesn't.
4. What does Install_tsk.exe do?
5. I have tried with different rom, but extended rom from imate JJ, but that doesn't work either.
6. Is there a way to fix this problem? I have seen this problem with several other people in this forum, but no concrete solution is found yet.
7. Can somebody else confirm that, indeed there is some IMEI checking in the imate roms?
8. being able to use the imate JJ roms on O2 indicates that there is no IMEI checking in the ROM itself.
9. Help is desparetly needed. :roll:
S.D.

JasJar on T-Mobile
I have tried everything since I got my T-Mobile and I installed like 100 ROMs trying to make my T-Mobile MDA Pro thinks that it is a JasJar...but no luck...
I have installed the WWE JasJar with no problem, I think the problem is installing the ME version with Arabizer and the AntiVirus software...and yes it does check the IMEI number...
My T-Mobile now officially an O2 but it seems like it refused to think that it is a localized version of the iMate JasJar.
Is there a way that makes my T-Mobile thinks it is a JasJar????

this seems to be an issue with a lot of people. can we have some experts to help us out?

IT CAN NOT BE DONE...SORRY
somedesi said:
this seems to be an issue with a lot of people. can we have some experts to help us out?
Click to expand...
Click to collapse
I think that the "Arabizer" developers had locked in the software to work only on the iMates...with specific IMEI numbers, I have installed the WWE ROM on my T-Mobile and it works fine but when I install the ME ROM it does not work...
I AM GIVING UP...

Foxtel and Schaps ROM's

Hi guys..
Ive tried numerous schaps ROMS and cannot for the life of me get FOXTEL working on the Telstra network. Ive installed all the Telstra Cabs inc my places etc but no luck.
It seems as if the IE link does not recognize a 3G portal...
Any help would be appreciated as i cant stand this official Telstra ROM.
Jason

Surely someone must be able to help..... anyone?

Hmmm, thats weird as I have run Schaps 4.22 and got it working fine with the Telstra CAB files. I take you have a version of Schaps with Streaming media? Also what Telstra CAB files are you using? WM6 ones or the old WM5 ones? Do a search here on for Telstra ROM as someone has all the CABS for the new WM6 rom update. From memory I just ran two cab files, Telstra V5.5 & theDefault WM6DST2007-2 and it worked a treat.
Dev

Isnt that the cab for daylight savings??
I installed the No_Video_Uninstall.cab, Telstra V5.5.cab and the My_Places.cab. Still wont work even with streaming media and telstra proxy activated. For some reason it wont recognize the Telstra 3G portal and i think that has something to do with it.
Jas

New hermes 8525: new Wifi issues

hey everyone i recently purchased a cingular 8525 with wm5 and decided that it would be a good idea to upgrade to wm6 (don't know exactly why but i did it) anywho... after i did so i found out that the wifi does not work anymore and i'm new at this so i have no idea what could possibly be the prob. Before i upgraded the os, wifi worked like a charm didn't really have to configure it or anything just detect settings and available wireless signals etc and that was it. pleeeez ppl who ever knows what i'm talking about please pretty please help cuz this is annoying me

Hi
Which ROM did you upgrade to, also, did you flash HardSPL before that? which Radio ROM are you running, and does the WIFI actually turn on when you use the comm manager?

I upgraded to the WM6 Cingular USA version, I did not flash HardSPL before that. I assume that unless the upgrade from wm6 changed the Radio ROM I am running, I’m still running the same one that comes with the version of wm5 that came with the phone when I bought it (btw what is a radio rom? Sry for my ignorance) And yes the WIFI actually turns on when I use the comm manager in fact it all seems to work fine but I just cant access the internet with it, even though it detects a signal. It stopped working the moment I upgraded to wm6

After flashing roms I had the same problem..make sure under the tab network adapters the line that says My network cards connects to..is set on internet..most roms start out with it on work..that change always works for me

So i deceided to downgrade the rom from wm6 to wm5 and yes apparently it has something to do with the rom version because my wifi connection works again!! with the old version which is wm5, but the moment I upgraded again to v6 it stopped working and like I said everything in the settings seems to be working fine, there’s just no internet, I should just be happy with the old version of windows mobile but version 6 has some features that I really liked does somebody know why this is happening? and if yes is there a solution? It might b more obvious than I think but I really don’t know so I really appreciate those who post help and advise thank you!

Put it back to WM 6.0..we will figure out what is wrong. There are alot of really good people on this forum and the answer to your problem is here. WM 6 is so much better.

Thanx for the support and the advise. So i installed another version of wm6 this one seems to be for Dopod but at least the internet works!!, the one i previously installed was an official version of wm6 for cingular which like i said before, for some strange reason i was not able to use the internet with wifi my only concern with having this Dopod version is that... well... its for the Dopod and does not come with the features that cingular offers to AT&T/ cingular users like myself. But then again it seems like everything else works just fine I just wonder why the cingular version doesn't work?

Sounds like your a little new to this. Here one of the golden rules:check out the hermes wiki and learn alittle about the flashing process and the different roms and their settings. There are alot of good roms out there that set up for ATT users, like K's Rom ,which is what I've been using for months. Works fine right after flashing. It has the right amount of programs and tweaks. Do alittle research and it will be worth it. It may take a couple different roms to find what you are looking for. Make sure you HardSpl your phone(the guide of flashing is in the wiki) Good Luck

i second blackout128's post
read the wiki
install hard spl
flash to your hearts content!
although, make sure you read the threads first! good luck and welcome to hotel d'hermes!

siskus said:
I upgraded to the WM6 Cingular USA version, I did not flash HardSPL before that. I assume that unless the upgrade from wm6 changed the Radio ROM I am running, I’m still running the same one that comes with the version of wm5 that came with the phone when I bought it (btw what is a radio rom? Sry for my ignorance) And yes the WIFI actually turns on when I use the comm manager in fact it all seems to work fine but I just cant access the internet with it, even though it detects a signal. It stopped working the moment I upgraded to wm6
Click to expand...
Click to collapse
Had same problem with WIFI using (RUU_Hermes_CINGULAR_WWE_3.62.502.3_6275_1.54.07.00_108_UOOS_SVN05_Ship.exe) ROM. Had to disable the Cingular proxy. Select: START-PROGRAMS-PROXY MANAGER-DISABLE PROXY. After that, was able to connect to the internet with WIFI.

No GPRS After Upgrade

I was using my stock universal (T-Mobile MDA II) with GPRS connection. I upgraded the ROM to Ranju's V7.6 WM6.1 ROM and in general I think it's a great improvement except now my GPRS connection doesn't work. I have tried Shap's Setup Operator but it doesn't have an option for the US. I think I either need to upgrade my radio ROM, or I need a CAB to tell the universal how to use the GPRS in the US. Can somebody please give me some tips to get it working again?

Posterbation
Just to update folks, I was about to go back to the stock ROM but I stumbled accross the DarkForcesTeam ROM and gave it a whirl. GPRS in the US on T-Mobile works just fine with that ROM. I actually like it better because it has less software installed so I can install my own, and it has a really nice custom Today screen.
James

I have the same problem of no GPRS with Ranju in the UK on vodafone.

Vogue GPS hardware port (TELUS)

Hi all, after following all the FAQs/instructions I upgraded my vogue on Telus to 6.5 and installed the Telus carrier cab and the GPS registry fix.
My GPS still doesn't seem to be working though - in particular, under settings there is no GPS detected and therefore the hardware port is not set to anything. Does anyone know the settings to the TELUS vogue to make it work? I've only tested iGo 8 so far, which doesn't detect a GPS. I will probably try iGuidance 4 on it soon also, but so far I can't seem to figure it out.
Any help would be great! Thanks!

edYYZ said:
Hi all, after following all the FAQs/instructions I upgraded my vogue on Telus to 6.5 and installed the Telus carrier cab and the GPS registry fix.
My GPS still doesn't seem to be working though - in particular, under settings there is no GPS detected and therefore the hardware port is not set to anything. Does anyone know the settings to the TELUS vogue to make it work? I've only tested iGo 8 so far, which doesn't detect a GPS. I will probably try iGuidance 4 on it soon also, but so far I can't seem to figure it out.
Any help would be great! Thanks!
Click to expand...
Click to collapse
Did you run the Bell ROM first to get your radio up to 3.42.50 or something similar?

rlaxton said:
Did you run the Bell ROM first to get your radio up to 3.42.50 or something similar?
Click to expand...
Click to collapse
He doesn't need to. The current Telus Radio is 3.41.00 which is high enough. Running his own radio will help with carrier provisioning as well.
From a fellow Canadian who knows lots of Telus Vogue owners that is good enough.
Where you errored was the gps registry fix. That is for Verizon users.
1. Reflash your Telus 6.1 Stock ROM, let all customizations run
2. Reflash V8 (or wait for V9) from bootloader
3. Hard reset
4. run Telus carrier cab
Done.......load google maps and the GPS should work.

Thanks jmitr. I'll give it a try since V9 is out and I'm going to upgrade anyways.
What's strange is on the NFSFAN page 238 rom, those GPS cabs are listed for all providers other than Bell, and Telus does have one (that's the one I used) that's separate from the VZW one. I guess that should be clarified somewhere.
Thanks again! I'll let you all know how it goes.