can anyone help? - Touch Pro2, Tilt 2 Windows Mobile General

i am looking to find a way to aphend the phone prefix from dialing 1 whenever i place a call.
I could do it on my tp but the tp2 doesnt have that option
getting down to almost 0 tweaks i want

Please put the issue you need help with in your thread title.
It's just good practice.

if you're doing it from your contact list & the number doesn't have the 1 in it, it shouldn't dial it. If you're doing it from your call history from a received call or even from a received text, since those come in as 1 (XXX) XXX-XXXX all the time, then it will have the 1 in front of it.
I'm curious, why does it matter?

well on the touch pro if you didnt eneter a 1 into contacts and someone called you it wouldnt show your contact as calling. but it looks like the tp2 works for caller id.
to many ****ty software glitches in the TP glad its gone.
htc's worst cellphone for sprint

Related

WM6.1 Caller ID issue

Hey folks,
I've searched the forum and Googled this issue, and I haven't seen it in quite this way, so I'm going to just ask it. And maybe this is is just a misunderstanding of how Caller ID works on the Excalibur, so please correct me if I am wrong:
My Caller ID works fine for those numbers that are in my Contact List, or course. By this, I mean I see both name and phone number. But for unknown numbers, I see just the number and no name. Which is annoying, to say the least.
I have noticed this more since I had to restore my Contacts a couple weeks ago, although I don't think that has anything to do with it. I see no Phone setting that affects this.
Okay, so the question is, is this the natural state of affairs for Caller ID in wm6.1? If the number is not in your contacts, you don't get full Caller ID? Or am I missing a setting or a registry entry or something?
DF
darkfire62 said:
Hey folks,
I've searched the forum and Googled this issue, and I haven't seen it in quite this way, so I'm going to just ask it. And maybe this is is just a misunderstanding of how Caller ID works on the Excalibur, so please correct me if I am wrong:
My Caller ID works fine for those numbers that are in my Contact List, or course. By this, I mean I see both name and phone number. But for unknown numbers, I see just the number and no name. Which is annoying, to say the least.
I have noticed this more since I had to restore my Contacts a couple weeks ago, although I don't think that has anything to do with it. I see no Phone setting that affects this.
Okay, so the question is, is this the natural state of affairs for Caller ID in wm6.1? If the number is not in your contacts, you don't get full Caller ID? Or am I missing a setting or a registry entry or something?
DF
Click to expand...
Click to collapse
How does the phone know more than the number of the caller if not in contacts???
I was thinking of the way my landline phone (yes, I still have one of those, but I may be canning it soon) gets its Caller ID information. Verizon just sends it down the line to the phone. I thought T-Mobile did the same thing, the service just sends the necessary info down the line to the phone, but I thought that was a given (Caller ID) with wireless phone service. Maybe I'm mistaken, which maybe someone could clarify for me?
Now to me, what I'm getting seems like "partial" Caller ID, the number without the name? Or maybe I'm just totally confused on it all, been a rough week...
I have yet to see Caller ID show a name on a cell phone if it's not in your contacts. Verizon included.
I didn't mean Verizon's wireless service, I meant their landline service.
Never mind, went over to T-Mobile, that's the way it's sent down, number only. Thanks.
darkfire62 said:
Hey folks,
I've searched the forum and Googled this issue, and I haven't seen it in quite this way, so I'm going to just ask it. And maybe this is is just a misunderstanding of how Caller ID works on the Excalibur, so please correct me if I am wrong:
My Caller ID works fine for those numbers that are in my Contact List, or course. By this, I mean I see both name and phone number. But for unknown numbers, I see just the number and no name. Which is annoying, to say the least.
I have noticed this more since I had to restore my Contacts a couple weeks ago, although I don't think that has anything to do with it. I see no Phone setting that affects this.
Okay, so the question is, is this the natural state of affairs for Caller ID in wm6.1? If the number is not in your contacts, you don't get full Caller ID? Or am I missing a setting or a registry entry or something?
DF
Click to expand...
Click to collapse
I thought I was having that Problem..
but im now having the problem with the Pictures not coming up.
tdavis75 said:
I have yet to see Caller ID show a name on a cell phone if it's not in your contacts. Verizon included.
Click to expand...
Click to collapse
In Canada Rogers offers this service. They call it Name Display
^^^^^^^^^^^yup dont forget fido too lol

unknown caller id on tilt 2

When someone calls, I noticed caller ID says unknown caller. Not sure why, but I'm using sim contacts. I also tried to switch to phone contacts. I do notice the correct ID shows up in call history, just when someone is calling then it is unknown.
has there been a fix?
Well i am facing the same issue as well with Tilt 2 and sometimes it takes 2-3 rings before the contact name shows up
Yeah many other people are experiencing the same exact problem as you. If you want to get the latest updates on that situation here is a link to an active thread about this problem.
http://forums.wireless.att.com/cng/board/message?board.id=cingular&thread.id=121751
call HTC and AT&T 3x a day untill they do something about it.
Eventually the company will invetigate it and do something about it.
Right now, this issue is just stuck in the HTC and AT&T tech department
Instructing you to do the same thing that does not fix it.

Issues with 6.5 ROM

Hi,
since I upgraded my TP2 ROM with the WinMo6.5 from HTC I encountered two issues which really make me regret this from time to time:
On incoming calls very often the caller name is not displayed even if the phone number is known in my address book. Also in call history i just see numbers, not names. This worked perfectly in 6.0.
When I receive a call, i press "take call" but the phone simply wont take it. Instead it silences the ringtone but there is no chance I take the call.
I searched the forum but couldn't find anything that would help. There was some registry entry about setting the size of phone numbers which should fix problem one, but the issue here is, that German phone numbers don't have any fixed size, so the suggested fix is not working. Also I'd wonder why I have to set something up when just the same thing worked perfectly in 6.0. As for the more annoying "can't take call" thingy, i am absolutely clueless. Has anyone of you encountered these issues before and if so, were you able to fix them?
I can't find the link readily but I thought I remember reading that adding (or removing) the "+" in front of phone numbers in your contacts helped the first issue.

[Q] T-Mobile caller id?

Is anyone having issues with their S III not displaying caller id on T-mobile?
After the bloatware subscription T Mobile Caller Id ran out it seems like most calls I receive now show no caller id info. I wonder if this a problem tied to that app, or something different.
Caller ID as in someone that's not on your contacts? Cause, that's a service you have to subscribe to I think. Otherwise...all my Gmail contacts show up when they call.
Called ID should be working fine but I believe you only get 7 days for free, I got rid of it cause I feel the app is just wasting my battery
Sent from my SGH-T999 using Tapatalk 2
Even if it is someone in my contacts, it still says unknown.
SiNJiN76 said:
Caller ID as in someone that's not on your contacts? Cause, that's a service you have to subscribe to I think. Otherwise...all my Gmail contacts show up when they call.
Click to expand...
Click to collapse
My caller id worked 2 times tops during my 7 day trial. One came with the name and the other unknown. Do I want to subscribe? That's a no brainer.
Sent from my T-Mobile Samsung Galaxy S3 16gb Pebble Blue running Stock ROM
I'm running a rooted (mostly stock) rom and the tmobile subscription caller id is not there as an option on my phone. Therefore, I have never set it up. I have, however, noticed half a dozen people or so that are in my contacts that still show up as unknown when they call. If I call them once from my phone, it appears that my phone recognizes them the next time they call. What a pain. I've heard of several people having the same or similar issues. Hope they patch this stupid bug.
NO CID on T-Mobile
Caller ID stopped for me yesterday. I am not talking about the bloatware CID w/subscription. My work cell that is most definitely in my address book, is showing as "Unknown." Strange thing about this is that while on WiFi calling, if I call my work cell 1st, it will show the contact info. Calling 1st on the cellular network does not work. I am on hold with a CSR that is really trying but no success yet. She had me pull the battery and SIM. WTF?!?!?!

How to display call log by caller, not date...

My dad's SGS2 for Sprint recently went 4.0.4 OTA and though I was excited for him, he's not happy about the default call log only showing recent call activity by date and not by caller as he claims it used to be. For instance, he runs a business and for him it's important to be able to click on a contact and have all call log data available in one spot for that contact as opposed to scrolling through the entire history of all callers to find when he may have missed a call from someone. Does anyone know of an app or ROM that could help? This apparently can be done for people who are registered contacts, but he wants it done for when someone's not a contact.
Still Possible / Horribly Inconvenient
This is the nicest free replacement dialer IMO, a MiUI style dialer with the same functionality your father is looking for.
play . google . com /store/apps/details?id=com.modoohut.dialer&hl=ja

Categories

Resources