WM6.5.X for all Pharos Traveler - Upgrading, Modifying and Unlocking

Hello Fellows!
I had concluded the WM6.5.X firmware for Traveler 600, 117, 127 and 137, flashing through USB connection, as the original firmware.
In this version there is a lot of new visual and performance improvements. Stable so far.
Use it under your full responsability and ENJOY the new features of WM6.5.
- NEW WM6.5.X for Traveler 600
- NEW WM6.5.X for Traveler 117
- NEW WM6.5.X for Traveler 127
- NEW WM6.5.X for Traveler 137
- Patches to performance and additional applications.
Here is the link:
http://erickwill.4shared.com
Regards,
Erick Will

I have a new Pharos 137 and really would like to help progress of WM 6.5.
Since this phone will be in the "evaluation" stages for a week or two, I can volunteer to help Beta test; however...
I need as much information as possible regarding how to restore to previous ROM(s), and with your recommended FULL backup/restore as well as auto install product recommendation(s).
Drop me a note if I can help.

You need a Vista PC and the 6.1 ROM from the Pharos website. Obviously you need to restore your data manually in each case.

I have been using the 127 rom for almost two weeks now and really have no complaints. It runs great check out the video above or if you have already tried it, please post your comments.

Beta testing
GoochyPuppy said:
I have a new Pharos 137 and really would like to help progress of WM 6.5.
Since this phone will be in the "evaluation" stages for a week or two, I can volunteer to help Beta test; however...
I need as much information as possible regarding how to restore to previous ROM(s), and with your recommended FULL backup/restore as well as auto install product recommendation(s).
Drop me a note if I can help.
Click to expand...
Click to collapse
Sure, you can help.
So soon I release a new rom for your device I can send a link for your e-mail..
Please, add me on msn [email protected], so we can keep touch.
Best Regards,
Erick

Traveler 127
Well Erick has done it again. This is another great, stable rom for the Traveler 127. the touch scrolling in this rom has been improved and overall is more stable than pervious versions. Erick is still working on get the video dailer skin working but for the time being he has place the windows default dailer skin which is fully functional. Give it a try http://www.4shared.com/file/156791474/f2240a3/Traveler127WM65328002VistabyErickWillV6.html with this link, the link aboveis now invaild. If don't like it simply flash back to Pharos's wm6.1 version, but I'm sure you wont.
If you like Ericks work please support him https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=9119637
Also check out the video of the pervious rom run on my Traveler 127 http://www.youtube.com/watch?v=ykLbPztd_Q4

i have Velocity 103, look like Pharos 117, so, can u help me unlock CID for this phone, thanks very much

Oh my god
the link is break
cant down from 4share.com

Thank you Erick. I'm trying your ROM now.
I'm downloading Pharos 127 one. Again, thank you.

ted presley said:
Thank you Erick. I'm trying your ROM now.
I'm downloading Pharos 127 one. Again, thank you.
Click to expand...
Click to collapse
You are welcome! Enjoy!

erickwill said:
You are welcome! Enjoy!
Click to expand...
Click to collapse
Hi Erick, I have a problem with GPS for the latest ROM (27 June) for Pharos 127, My GPS receiver is not recognized any more.... (where my 6.1 ROM form the Pharos website worked)...Have you got any idea about that?
Many thanks,
TaK
P/S: you have uploaded more rom? Will try right now . Thanks again. ^^

Thanks Erickwill, your rom good to me, hehe.Thanks again

Battery life....
Are there still issues with battery life, like there is with the pharos-supplied roms?

You can try it and report me any bug. So far so good the current roms is smooth and stable and has no battery issues.

So far, so good! Only issue was I had to re-download the SmartTraveler software then get a new product key from Pharos, but no problems there.
Thanks ericwill!

This works for Pharos 600 GPS Phone? If so, which files in the link do I need to download? How do I actually flash it? I'm a network admin, but don't play with phones too much.

Yes it works on your phone. You have to download it on the respective folder. So connect your phone through usb and execute the executable.
Let me know if do you have any questions.

I connected my phone and it was showing connected in "Microsoft Mobile Device Center". I got the phone screen to show the USB was connected. But the update button was greyed out. It said to disconnect and reconnect. I did and the phone froze. I took out the battery to reboot. Now it will not turn on at all. When I hold the power button on the red light flashes but doesn't turn on. DidI just brick my phone?

Not at all. There is two methods to update your phone.
The first is through usb and the second is through the SDcard. You can try to do that through the second method. However, is very strange to stuck the instalation process. I wondering if you downloaded the correct OS since there is a lot OS for many devices there.
Let me know if do you know about how to flash through usb. If you have any questions add me on msn so we can chat about. [email protected]

I can't even get it to turn on at all.

Related

Windows Mobile 6 Thread Links

As the Hermes Windows Mobile 6 forum is now being cluttered with stickies, this should provide you ppl who cannot use the search function to access your Threads... Please post the relevant questions/bugs/information into the appropriate threads.
Windows Mobile VI - Black Edition 3.0.1 (initial release 07-05-2007)
Dutty's Windows Mobile 6 Premium v2 (initial release 22-04-2007)
LVSW Windows Mobile 6 (initial release 19-05-2007)
Sleuth's Developer Variant (initial release 21-05-2007)
WM6 Cooked ROM - 3DES.5 (initial release 30-04-2007)
Custel Windows Mobile 6 - 2.5 (initial release 17-05-2007)
WM6 CCS WWE Asia Edition (CHS/CHT/JPN) (initial release 25-04-2007)
Dopod WM6 Test ROM (initial release 20-04-2007)
Window Mobile 6 Vanilla (initial release 26-02-2007) [unsupported]
Xda-Live Windows Mobile 6 (initial release 21-02-2007) [unsupported]
WM6 translation to German (initial release 11-03-2007)
Upgrade Guides
Hermes - by mrvanx
Configuration Apps
Provxml and Xml Config Loader
Shaun33 Sip Configuration App
People Please dont post in this thread!!!, can mods remove these posts?
Help Downgrading Black pro 2.0
Could anyone tell me how to "downgrade" my Black pro 2.0 do the WM5 1.35 ROM? I am having trouble with some applications in the Black. I tried running the upgrading utility for 1.35 ROM but it doesn't recognize the usb connection. I thought it might be a problem with the SPL 1.40 Olipro and changed to 1.10 Oli... still the same problem. I tried changing it to 1.10 MGF but mtty won't recognize the usb connection either. It's not a problem with my usb port because everything else works fine, including the phone syncronization. Any help is appreciated.
Icarps said:
Could anyone tell me how to "downgrade" my Black pro 2.0 do the WM5 1.35 ROM? I am having trouble with some applications in the Black. I tried running the upgrading utility for 1.35 ROM but it doesn't recognize the usb connection. I thought it might be a problem with the SPL 1.40 Olipro and changed to 1.10 Oli... still the same problem. I tried changing it to 1.10 MGF but mtty won't recognize the usb connection either. It's not a problem with my usb port because everything else works fine, including the phone syncronization. Any help is appreciated.
Click to expand...
Click to collapse
this isnt the proper place for this type of question... please read and search.. there are threads on here for what you are looking for.
http://forum.xda-developers.com/showthread.php?t=301370
I also removed the requested posts...
my oppinion: go and spend 30mins-1 hour and read through the threads for each rom andmake up your own mind, failing that try them all out.
if you cant be arsed then dont bother with wm6.
Do not post in this thread... this thread is for links, not support!!!
BLACK 3.5 Is Released!!!!
BLACK 3.5 Is Released!!!!
http://wmblack.info/
Hurry UP!
shogunmark said:
Do not post in this thread... this thread is for links, not support!!!
Click to expand...
Click to collapse
I know, but I'd like to point out a question for this list: besides the start date, is it possible to add even the date of the newest release please? This can easily help to figure out which are the most active releases vs the ones which have a more discontinued developing.
Thanks
PS: then, feel free to delete my post after the mods have seen my request
akzion said:
I know, but I'd like to point out a question for this list: besides the start date, is it possible to add even the date of the newest release please? This can easily help to figure out which are the most active releases vs the ones which have a more discontinued developing.
Thanks
PS: then, feel free to delete my post after the mods have seen my request
Click to expand...
Click to collapse
I 100% AGREE WITH YOU, THIS IS A MISLEADING POST, AND IT IS A STICKY ONE, SO IF A NEW MEMBER LOGGED IN HERE HE WILL USE AN OBSOLETE ROMs, WHILE WE HAVE NOW THE BEST ROMs BASED ON THE NEWELY RELEASED OFFICIAL ROM.
PDA VIET's ROM
there're alots of roms
Can I echo the request that this potentially very useful thread be amended to reflect the last amended date (of first post on the thread) rather than first post date?
Currently this thread doesn't really have any real value for the people it's intended to help.
(Can I also suggest it gets locked except for amendments or addenda by mods?)
Thank you!!!!!!!!
Never works
I follow the steps and i get to the point were it says you are now ready to update rom image and hit next it then wants a reply on my device to continue when i hit yes it goes to the ttri color screen looses it connection with my computer and the ruu program says it also lost connection.
phone info:
IPL-SSPL by Des
SPL-1.09.ds
Rom version 2.15.502.3
Rom date 4/09/07
Radio version 1.40.30.00
Protocol version 32.73.7020.16H
I need help i have used other peoples methods and d-loads and cannot get it passed the 6th stage were it is ready to update.
Thanks for any info, Mrextrem
@MODS
Can you unstick this thread? It is quite outdated now...

HELP my PDA not working after Schap's WM6.1 Pro 4.40 Beta ROM

I have upgraded to Schap's WM6.1 Pro 4.40 Beta ROM
and revived this message on start up: This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers. To obtain a newer release or further info, please revisit the web site that you used to obtain your current beta release.
That's it. Can't do anything can't eles help.................................
You must back to return
tshtsh said:
I have upgraded to Schap's WM6.1 Pro 4.40 Beta ROM
and revived this message on start up: This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers. To obtain a newer release or further info, please revisit the web site that you used to obtain your current beta release.
That's it. Can't do anything can't eles help.................................
Click to expand...
Click to collapse
Dear friend,
I know schaps have a fout make by these rom. You must old rom update on your hermes. You must power and sound button pressed than hard reset doen than you if you see a colored screen than can you old version rom update. Sample: Schap'4.31
regards,
Bahadir
thanks for the quick respond
tshtsh said:
I have upgraded to Schap's WM6.1 Pro 4.40 Beta ROM
and revived this message on start up: This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers. To obtain a newer release or further info, please revisit the web site that you used to obtain your current beta release.
That's it. Can't do anything can't eles help.................................
Click to expand...
Click to collapse
What should you do:
1) READ THE ENTIRE THREAD OF THE ROM BEFORE FLASHING (IF THERE IS BETA SIGN!!!!
2) you can either keep it - it will work if you take off the SIM card and Hard reset the device, then turn off automatic time update from network AND do not try to synchronize the device via AS (taht way the device will know the correct time and block itself again)
3) Flash any other ROM - you do not need Active sync to be working to flah a ROM, just put your device into Bootloader, plug the usb cable and if the bootloader says USB you can flash whatever ROM you want. If you want WM6.1 you can use PDA viet ROM (works without time bomb, but it is not very stable).
The PDA Viet WM6.1 works great after setting PagePool to 6mb instead of the default 4mb. Before doing that, it was extremely buggy and unstable.
Hi all, i'm sorry i'm french and i don't speak english.
I updated yesterday my tytn and i have yet the same problem.
I have this message and i' can't synchronized my phone with my pc since i uptdated it.
I don't know what to do?
PLease help me.
Thanks
julien
juliengourou311 said:
Hi all, i'm sorry i'm french and i don't speak english.
I updated yesterday my tytn and i have yet the same problem.
I have this message and i' can't synchronized my phone with my pc since i uptdated it.
I don't know what to do?
PLease help me.
Thanks
julien
Click to expand...
Click to collapse
Read post #2
TechBill said:
Read post #2
Click to expand...
Click to collapse
Excuse me, i read it but i don"t understand wery well.
I have to take a hard reset , with pressing the power button, but what is the sound button ?
it is the weel on the left side ?
i have the screen with color but during the update i have the error27O "the image file is corrupt..."
juliengourou311 said:
i have the screen with color but during the update i have the error27O "the image file is corrupt..."
Click to expand...
Click to collapse
It telling you what it says .. Image file is corrupt so try a different ROM, like a factory rom for your device.
And did you read the wiki recommending to flashed Hard-SPL on your Hermes before flashing any radio or ROM?
yes i read any.
But i suppose there are problem because i have the same problem with diffrents roms... I 'm trying to resolve the problem...
after few pourcents, it restart and tell this messages
I tried 6 or 7 roms and 1 official, no way to install.
All rom tell me at 1% that the image rom is corrupt. Before it worked but since the WM6 , no way.
The official rom tell me at 1% that the vender id is invalid...
I don't know what doing...
juliengourou311 said:
I tried 6 or 7 roms and 1 official, no way to install.
All rom tell me at 1% that the image rom is corrupt. Before it worked but since the WM6 , no way.
The official rom tell me at 1% that the vender id is invalid...
I don't know what doing...
Click to expand...
Click to collapse
Well did you flash Hard-SPL on it first before flashing any ROM?
You might have to try flashing from SD card now since you can't flash it via usb. It explained in the wiki.
.

Newby - SPV M700 -> WM6 question

Hi all - sorry about this, but I'm new to this. Got an Orange M700 - still running the original Orange branded WM5 OS: yup, Orange have mangled it. I've been reading the (many...many...many) threads and the wiki and... well I think I'm more confused than ever.
So, just wondering if someone can advise me on the best route to upgrade, and bear in mind I'm a graphics guy....
So, briefly
from the Orange WM5, is there a straight one-step upgrade to WM6?
What .cabs/versions should I be looking for? -> I know there are many you guys have tuned. I guess I'm looking for a fairly standard one? Unless you think otherwise!
Are there any major caveats (other than warranty/support invalidation)?
Need a little hand-holding...
Thanks in advance.
Hi, welcome..
I have M700 too, took the plunge a while back and loaded one of Mun's ROM's.
All I did was install activsync onto my pc and hook up the phone for the first time, once that ran its course I unplugged the phone powered down and removed the sim & sd card and then powered back up again.
Once up n running I plugged it back into the pc and ran the rom I had chosen, yes I was worried it might go wrong but I have to say it was and is very simple n straight forward. There is a WM5 Orange backup rom on here so if you ever did need to send back then you can flash this back onto the phone so it "looks" normal, tbh I'd doubt it would come to that.
I was using XP-SP2 at the time, not sure of anything different for Vista but that's where others here will put you straight, since then I have altered rom many a time and finally settled for Tom's Black'n'Blue - nice and fast and room to add what I want to add rather than be given. Oh and also update the radio rom to the latest version too, pretty much the same method.
Have a look at the roms and decide what you want Happy modding...
Only "gotcha" try and flash from XP, it is rumored to be problematic on a vista PC.
Also be warned flashing ROMs can be addictive, think i have tried 8 or 9 on my Trinity to find one i like, have yet to try the MUN one suggested in the previous post, looks like it will be next.
Ah, twas an early Mun rom and was WM5 - like I said the very first rom I'd flashed so I wouldn't flash to that now
Also realised why i hadn't tried it, i have tried several 6.1 ROMs and none of the WM6 ones. Probably will now i think about it though.
spv m700
Just joined the forum, thought I'd say hi.
I've just bought an spv m700 (following 2 years of the great spv m600), mainly because I wanted inbuilt gps.
The previous owner flashed it with Windows Mobile 6.1, I've yet to really test it.
First of all, I'm going to re-install all my Spb software (spb time, spb backup, spb mobile shell, etc) and transfer contacts etc via active sync.
If anyone has any advice or tips n tricks that you feel may benefit me, I'm all ears.
Cheers,
Matt.
Mattster_spv said:
Just joined the forum, thought I'd say hi.
I've just bought an spv m700 (following 2 years of the great spv m600), mainly because I wanted inbuilt gps.
The previous owner flashed it with Windows Mobile 6.1, I've yet to really test it.
First of all, I'm going to re-install all my Spb software (spb time, spb backup, spb mobile shell, etc) and transfer contacts etc via active sync.
If anyone has any advice or tips n tricks that you feel may benefit me, I'm all ears.
Cheers,
Matt.
Click to expand...
Click to collapse
First of all, welcome!
You have to know that the key to knowledge is searching, reading, and if none of those work, asking through posting!
So, happy enlightment and enjoy your device!
OK Monkeybox - hold out your hand - here's mine.
First thing - choose a ROM (sorry, you'll need to make your own choices). Judging by what you have said a LITE ROM would suit your needs.
I have tried most trinity ROMS. I like ADW's ROMs, am currently on Akeo's ROM but have tried LVSW, mUn, black and blue, PDAVIET, FInixNOver, ervius etc etc etc (Sorry if I've tried and forgotten your ROM!). Once you have your ROM, you should unlock the phone
1. (Hard-SPL - Service Providor Lock). http://forum.xda-developers.com/showthread.php?t=299659 This will enable you to flash a ROM with different carrier ID to you SPV M700. OK - Once you have hard-spl'd your phone, find the RUU (Rom Update Utility) exe file within the ROm that you downloaded.
2. Connect your phone (windows XP is best) using activesync and when activesync is connected, run the RUU Updater. The phone will switch off and go into "bootloader" (coloured bars on screen). If you get a connection error here, just run the RUU updater again. this time things should get going. When finished - your new ROM is installed - no more Orange!
3. Next update the Radio - search xda-developers.com using google for Trinity Radio - and choose 1.46 or 1.5x.
4. Install missing software (generally you'll need a GPS navigation software at least).
5. Enjoy.
6. If you like a ROM - donate to the cooker
7. Get a flashing addiction
8. Read all of the Kitchen threads
9. Cook your own ROM
10. Share it with us
11. Be eternally happy
nealed said:
OK Monkeybox - hold out your hand - here's mine.
First thing - choose a ROM (sorry, you'll need to make your own choices). Judging by what you have said a LITE ROM would suit your needs.
I have tried most trinity ROMS. I like ADW's ROMs, am currently on Akeo's ROM but have tried LVSW, mUn, black and blue, PDAVIET, FInixNOver, ervius etc etc etc (Sorry if I've tried and forgotten your ROM!). Once you have your ROM, you should unlock the phone
1. (Hard-SPL - Service Providor Lock). http://forum.xda-developers.com/showthread.php?t=299659 This will enable you to flash a ROM with different carrier ID to you SPV M700. OK - Once you have hard-spl'd your phone, find the RUU (Rom Update Utility) exe file within the ROm that you downloaded.
2. Connect your phone (windows XP is best) using activesync and when activesync is connected, run the RUU Updater. The phone will switch off and go into "bootloader" (coloured bars on screen). If you get a connection error here, just run the RUU updater again. this time things should get going. When finished - your new ROM is installed - no more Orange!
3. Next update the Radio - search xda-developers.com using google for Trinity Radio - and choose 1.46 or 1.5x.
4. Install missing software (generally you'll need a GPS navigation software at least).
5. Enjoy.
6. If you like a ROM - donate to the cooker
7. Get a flashing addiction
8. Read all of the Kitchen threads
9. Cook your own ROM
10. Share it with us
11. Be eternally happy
Click to expand...
Click to collapse
Thank you, and all others who have responded, for your greatly appreciated advice! I've been trying to get my head around the process. Have backed up using PIM backup and settings saviour... and with your hand holding, am about to dive into the world of modding!
It's a little daunting for a newbie (and I really do mean a newbie!), but with everyones help, and this fantastic community as a resource, bah, watch me fly! (I'll probably be back tomorrow asking how I can de-brick the phone ;O) )
Thanks again all.
Cool. Upgraded to WM6.1 - Akeos latest black one.
Have to say the functionallity is 10 times better already. Upgraded to the latest radio too.
HOWEVER... and this is where the newbie kicks in, I can't seem to start any data sessions. IN COmm manager I don't have the option to turn the data connection on (this was also the same prior to the radio upgrade)
Don't suppose anyone knows how to resolve this do they?
As I say, taking my first steps on the modding ladder, and it appears I may have slipped...
mkOnKeY bOy said:
Cool. Upgraded to WM6.1 - Akeos latest black one.
Have to say the functionallity is 10 times better already. Upgraded to the latest radio too.
HOWEVER... and this is where the newbie kicks in, I can't seem to start any data sessions. IN COmm manager I don't have the option to turn the data connection on (this was also the same prior to the radio upgrade)
Don't suppose anyone knows how to resolve this do they?
As I say, taking my first steps on the modding ladder, and it appears I may have slipped...
Click to expand...
Click to collapse
You have to define your data connection from "Start, Settings, Connections, Connections, My ISP, Add new" according to your carrier (ie GPRS, 3G). Same goes to configuring MMS, just that you do it at "Start, Settings, Connections, Connections, My Work Connection" and you also have to define it in Arcsoft MMS.
You will not be able to start them from the CommManager as they connect on demand as needed, but you can STOP the in the CommManager when they are connected since they don't disconnect automatically.
tnyynt said:
You have to define your data connection from "Start, Settings, Connections, Connections, My ISP, Add new" according to your carrier (ie GPRS, 3G). Same goes to configuring MMS, just that you do it at "Start, Settings, Connections, Connections, My Work Connection" and you also have to define it in Arcsoft MMS.
You will not be able to start them from the CommManager as they connect on demand as needed, but you can STOP the in the CommManager when they are connected since they don't disconnect automatically.
Click to expand...
Click to collapse
Once more, thanks to all who've helped me over the threshold - the data connection must have been an issue with the signal, as this morning it was happy to connect to mms/internet via 3G/GPRS and HSDPA (which I didn't even know Orange supported).
Cheers all. Your help has been absolutely spot-on. It's refreshing to come to a community where you not only happy to help newbies, without the usual sarcasm or pomposity you find elsewhere, but you do so in a clear and concise way that really does help.
Thanks all. Look what you've gone and started now... !!!
One happy newbie stepping out into a brave new world...
---edit---
please delete this post
have fun with your spv
I have a problem, and the more I search the forums, the more I worry it may be due to an upgraded Rom.
The original owner of the spv m700 I just bought has by the looks of it debranded it and installed WM 6.1:
Device name: HTC_P3600i
Model NO: TRIN100
Windows Mobile 6.1 Professional
ROM version 3.03.751.5
ROM Date: 04/01/08
Radio Version: 1.16.00.00
Protocol Version: 32.53.7018.01H
With Tomtom 6 installed and seemingly working, the GPS receiver is not being detected. I have done what the forums say, i.e. selected "NMEA GPC receiver", get a screen with:
COM3: GPS in COM9
COM7: RIL on COM6:
S2410 IRDA
I have clicked on the first option (COM 9 is recommended), but still no GPS device found, indoors or out, after 10 minutes of trying
Like I say, much info says the above should solve it, but others say an upgrade can knock out the GPS and it needs to have a different ROM reinstalled. Never done this before, and there may be an easier solution?
Help anyone.... please.......?!
I'm not 100% sure but I think your radio rom needs upgrading to support GPS - I'm sure the one's that do have 11 at the end of them..
Really?? It would be great to finally reach a soultion!
Can someone verify if this is true and if so, what do I have to do??
Thanks.
Hi Monkey Boy and all.
I think I'm in a similar situation that you were...
The original owner of my new spv m700 debranded it, unlocked it (by flashing an old radio ROM) installed WM 6.1. I now fear that the reason tomtom detests no GPS device is because the radio may need updating too... (see below for the spec on my phone at the moment).
Have you discovered which is the best radio to update to?
Device name: HTC_P3600i
Model NO: TRIN100
Windows Mobile 6.1 Professional
ROM version 3.03.751.5
ROM Date: 04/01/08
Radio Version: 1.16.00.00
Protocol Version: 32.53.7018.01H
All advice and recommendations welcomed. I have never flashed anthing before so this is all new to me, but I like to think I learn fast...
Thanks,
Matt
http://forum.xda-developers.com/showthread.php?t=293957
Original owner would have done this to unlock it, so all you have to do is search for the latest radio rom and flash that to your phone - there are guides how to do this in here..
Radio ROM
http://forum.xda-developers.com/showthread.php?t=325197&highlight=radio+flashing
Guides
http://trinityguides.info/index.php?option=com_content&task=category&sectionid=4&id=31&Itemid=66
Hey Trixter.
Thanks for the reply.
I managed to get in touch with the original owner and he sent me a link to an an .exe file which I downloaded, ran whilst activesynced to my phone, and voila! I now have radio ROM 1.50.08.11. Tomtom 6.03 now successfully works using settings "other NMEA GPS receiver" with "GPS baud rate 115200" and "GPS in Com9"!
I'm a novice and bought the phone as a "pimped up" spv m700. But I'm learning loads since joining thanks to people like your good self answering posts, so thanks.
Matt
Thanks to seeing your signature I'm sorted! If you read anyone else with the same problem, I hope my experience helps them.
Thanks again for your time,
Matt.

HP 614 upgrade to Windows Mobile 6.1??

Does anyone upgrade HP 614 to WM6.1?
Thanks!
any updates?
It's rom upgrade.
Thanks to Yevg001 from www.israpda.com
http://rapidshare.com/files/127265775/614c_WM61_19214.rar
pass:israpda.com
Sorry for my broken english.
This is link to post but on russian http://forum.israpda.com/viewtopic.php?p=60290#p60290 and for download you need regestred on forum.
So i think lin to dowmload it's ok!
UnRAR file to SDcard but not SDHC (not work) turn off device.
Push to record + mute buttons both and keep pushed. Push to power button and dismiss.
After you see SDLoder on display put device on table and wait for resume process.
After upgrade wait for windows logo and start yor's device.
Many thanks, I was searching for this for so long!!!
Just a couple of questions
1.It's on english?
2.It's works?
Do you know how to backup the original ROM before update?
thanks
1.It's on english?-Yes!!!
2.It's works?-Yes!!! Very good!!!More quickly the original!!!!
http://rapidshare.com/files/115715707/IPAQ_614c_ROMCode_WM6.0_18125.0.4.2_OFFICIAL_EN.rar.html - This is original ROM.
http://rapidshare.com/files/117446317/ipaq614c-mod_Yevg001-v1.0.rar.html - This is original two but Without different dust:
pictures,demo video and...
Pass:israpda.com
Regards to Yevg001 from www.israpda.com
And this program small but super utiliti http://rapidshare.com/files/127890053/qgps.rar.html
enjoy!!!
igorslon said:
1.It's on english?-Yes!!!
2.It's works?-Yes!!! Very good!!!More quickly the original!!!!
http://rapidshare.com/files/115715707/IPAQ_614c_ROMCode_WM6.0_18125.0.4.2_OFFICIAL_EN.rar.html - This is original ROM.
http://rapidshare.com/files/117446317/ipaq614c-mod_Yevg001-v1.0.rar.html - This is original two but Without different dust:
pictures,demo video and...
Pass:israpda.com
Regards to Yevg001 from www.israpda.com
And this program small but super utiliti http://rapidshare.com/files/127890053/qgps.rar.html
enjoy!!!
Click to expand...
Click to collapse
It works really very well.
Big thanks to Yevg001!!!
Keep up the fantastic work!
If there are any news, please let us know immediately!
This is new ROM upgrade
http://rapidshare.com/files/129473784/WM6.1_19214-fix.rar.html
pass: israpda.com
Fixed BLUETUOOTH data recive. + Q-GPS,Disconnect GPRS button and any more...
All TNKS to Yevg001 from http://israpda.com
http://forum.israpda.com/posting.php?mode=quote&f=89&p=61153
Not work the link.
Please put another link.
muntean.calin said:
Not work the link.
Please put another link.
Click to expand...
Click to collapse
Link from rapishare is working, already downloading , I'll install tomorrow and make a report ASAP.
igorslon said:
This is new ROM upgrade
http://rapidshare.com/files/129473784/WM6.1_19214-fix.rar.html
pass: israpda.com
Fixed BLUETUOOTH data recive. + Q-GPS,Disconnect GPRS button and any more...
All TNKS to Yevg001 from http://israpda.com
http://forum.israpda.com/posting.php?mode=quote&f=89&p=61153
Click to expand...
Click to collapse
I have installed the new version, Bluetooth problem persist.
- I can sent files and make data connections, but I can't receive files.
- GPS working, not testing for a long time to test lost of connection...
Atlus said:
I have installed the new version, Bluetooth problem persist.
- I can sent files and make data connections, but I can't receive files.
- GPS working, not testing for a long time to test lost of connection...
Click to expand...
Click to collapse
Did you try to activate "receive all incoming beam" under connection settings?
Thanks for report, it doesn't look like a stead version.
bigu1975 said:
Did you try to activate "receive all incoming beam" under connection settings?
Click to expand...
Click to collapse
Many thanks, that was the problem, I think Incoming Beans referred to IR, as per my other device.
It now works great!!!
I recommend the update. :
-More stable
-faster than WM6.0
-SMS threaded
igorslon said:
1.It's on english?-Yes!!!
2.It's works?-Yes!!! Very good!!!More quickly the original!!!!
http://rapidshare.com/files/115715707/IPAQ_614c_ROMCode_WM6.0_18125.0.4.2_OFFICIAL_EN.rar.html - This is original ROM.
http://rapidshare.com/files/117446317/ipaq614c-mod_Yevg001-v1.0.rar.html - This is original two but Without different dust:
pictures,demo video and...
Pass:israpda.com
Regards to Yevg001 from www.israpda.com
And this program small but super utiliti http://rapidshare.com/files/127890053/qgps.rar.html
enjoy!!!
Click to expand...
Click to collapse
Hi Igor,
I have a 614c since end of March and 3 more around me (of friends) all running on Cellcom SIM. It seems that the ROM does not have Cellcom as a listed service provider.
Since work with HP on a new ROM and have a beta ROM installed on my unit HP asked a few time is there a STD (Sleep Till Death) problem in an Orange SIM, bacause many customers compain about this besides the BT volume and AGC problem. Can you say some thing. Further more, what Hebew are you using on 6 and 6.1.
Thanks
Nir
Hello everyone,
Hi I am still kind of a beginner when it comes to updating roms n stuff but I don't plan to use my new PDA at all before I learn couple of things.
so I hope you'd be kind enough to help me out to get me started on this. I downloaded the latest WM 6.1 rom update and the original Rom as well but I will not be touching that before I can create my own back up and be able to restore it. The following questions are pretty much related.
1- I would like to know if there is a software that can run from my PC (not from the PDA) and backup or image the PDA Rom and contents to a file on my PC just like what I do with Ghost and my PC.
so what is the best way to back up a rom and how do I restore one (specifically for this device anyway)
2- are there any tuts I can look at.
3- Finally but most importantly what are the tools that a hardcore developer uses to do this kind of complex back up and restore, how do I create a flash.dio file like the WM 6.1 update and restore.
I am a .NET developer but never done anything for PDA's just yet. I really googled for couple of hours but couldn't find the right tools.
Thanking you in advance
analyzer.x said:
Hello everyone,
I just purchased the HP iPAQ 612c from Australia, This is my first PDA. So I am still kind of a beginner when it comes to updating roms n stuff but I don't plan to use my new PDA at all before I learn couple of things.
so I hope you'd be kind enough to help me out to get me started on this. I downloaded the latest WM 6.1 rom update and the original Rom as well but I will not be touching that before I can create my own back up and be able to restore it. The following questions are pretty much related.
1- I would like to know if there is a software that can run from my PC (not from the PDA) and backup or image the PDA Rom and contents to a file on my PC just like what I do with Ghost and my PC.
so what is the best way to back up a rom and how do I restore one (specifically for this device anyway)
2- are there any tuts I can look at.
3- Finally but most importantly what are the tools that a hardcore developer uses to do this kind of complex back up and restore, how do I create a flash.dio file like the WM 6.1 update and restore.
I am a .NET developer but never done anything for PDA's just yet. I really googled for couple of hours but couldn't find the right tools.
Thanking you in advance
Click to expand...
Click to collapse
Origimal ROM http://forum.xda-developers.com/report.php?p=2374906
And this a new ROM upgrade from Yevg001 www.israpda.com
http://rapidshare.com/files/131025566/WM6.1_19965_19965.rar.html
pass:israpda.com
Hi igorslon,
Thanks for reply.
However, hmm I am not sure how that answers any of my questions, I already have the files from these links, I am just not sure how to use them.
Again how do I begin to create a flash.dio for example?
I came across XDAtools
http://wiki.xda-developers.com/index.php?pagename=CompleteTools
but I am not sure how I can use it to back up my rom to a file.
any practical help please would be much appreciated. Thanks
Hi guys
I'm considering installing this ROM.
One question though. Are there any other XT9 languages than the English, Italian and Spanish that are in the original?
Z
ZiCoN said:
Hi guys
I'm considering installing this ROM.
One question though. Are there any other XT9 languages than the English, Italian and Spanish that are in the original?
Z
Click to expand...
Click to collapse
No are the same
Thanks for the quick respons

iMate Ultimate 8502 & 9502 WM6.1 1.77 Downloads

As requested by you!
8502 WWE 6.1 1.77 Official
http://rapidshare.com/files/186625883/Ultimate_8502_WWE_WM6.1.zipp
9502 WWE 6.1 1.77 Official
http://rapidshare.com/files/186622637/Ultimate_9502_WWE_WM6.1.zip
If you're having any problems with the links, let me know.
I'm not responsible if these ROM's brick your phone, they are the official downloads off the iMate website, they're unmodified.
Anyways, have fun
Mirrors here:
http://rapidshare.com/files/186622637/Ultimate_9502_WWE_WM6.1.zip
http://rapidshare.com/files/186625883/Ultimate_8502_WWE_WM6.1.zip
thank you very much for this useful program
I am looking for the same file but arabic I mean I went Ultimate 9502 Arabic WM6.1
if you have it
my friend​
does anyone know if there will be another official rom version for WM6.5 for Imate 8502?
or did anyone tried 8502 with another rom upgrade other than 6.1?
hey my friends,
This problem causes me headache:
I bought an old Ultimate 9502, right now the Jog dial is dead, and the flash led of camera also goes wrong, it doesn't make any action!
I want to update again the WM 6.1 for this device to see if the Jog Dial and Flash go well again or not!
As the old device so i don't have any account and cannot log in the www.imate.com, can't upgrade it online!
what i have now are ActiveSync 4.5 and V1.77 WM 6.1 Rom for it!
pls advice me how to update from my own PC? How to do? what more i need?
Thank you
[email protected]
[email protected]
dongni filth said:
hey my friends,
This problem causes me headache:
I bought an old Ultimate 9502, right now the Jog dial is dead, and the flash led of camera also goes wrong, it doesn't make any action!
I want to update again the WM 6.1 for this device to see if the Jog Dial and Flash go well again or not!
As the old device so i don't have any account and cannot log in the www.imate.com, can't upgrade it online!
what i have now are ActiveSync 4.5 and V1.77 WM 6.1 Rom for it!
pls advice me how to update from my own PC? How to do? what more i need?
Thank you
[email protected]
[email protected]
Click to expand...
Click to collapse
You see, sometimes, with this ROM, some of my hardware buttons (including the D-pad) refuse to work. But, whenever it happens, a simple soft reset sorts it out. I suppose you already tried that, right?
The next step, prior to reflashing, would be to perform a hard reset. By doing a hard reset, you'll lose all your data, and the device will return to its factory defaults. If you don't want to loose your data and settings, back them up beforehand, to be restored afterwards. I know of two full backup applications: SpriteBackup (the one I use), and SpbBackup. Besides, there is a very useful (and free) application which backs all your PIM up: PPCPimBackUp. Just search for it here at xda-developers.
To perform it by software means, tap on Start > Settings > System tab > Master Clear. It can be done by a combination of hardware keys too: press and hold both the blue Fn and the green Call buttons, and, at the same time, press the reset pin with the stylus pen (some people here replace the reset pin by pressing the Power button at the same time as the other keys, and it seems to work). A white screen will come up asking for confirmation.
If you still happen to have problems after performing a hard reset, then try to reflash. One of the steps of the flashing process will require you to enter the ROM lock code. If you bought your device with its original box, the ROM lock code is printed on a stick in it. Otherwise, you'd have to contact i-mate's support. The links on the 1st post seem to be dead, but the mirror ones on the 2nd post are still working. Just download the zip file which has '9502' in its name, unpack it to anyware you want on your PC, connect your device to it through the USB cable, and make sure ActiveSync is running. Then, double-click on the unpacked EUM SFX exectutable file and follow the steps.
Good luck!
Carlos
casouzaj said:
You see, sometimes, with this ROM, some of my hardware buttons (including the D-pad) refuse to work. But, whenever it happens, a simple soft reset sorts it out. I suppose you already tried that, right?
The next step, prior to reflashing, would be to perform a hard reset. By doing a hard reset, you'll lose all your data, and the device will return to its factory defaults. If you don't want to loose your data and settings, back them up beforehand, to be restored afterwards. I know of two full backup applications: SpriteBackup (the one I use), and SpbBackup. Besides, there is a very useful (and free) application which backs all your PIM up: PPCPimBackUp. Just search for it here at xda-developers.
To perform it by software means, tap on Start > Settings > System tab > Master Clear. It can be done by a combination of hardware keys too: press and hold both the blue Fn and the green Call buttons, and, at the same time, press the reset pin with the stylus pen (some people here replace the reset pin by pressing the Power button at the same time as the other keys, and it seems to work). A white screen will come up asking for confirmation.
If you still happen to have problems after performing a hard reset, then try to reflash. One of the steps of the flashing process will require you to enter the ROM lock code. If you bought your device with its original box, the ROM lock code is printed on a stick in it. Otherwise, you'd have to contact i-mate's support. The links on the 1st post seem to be dead, but the mirror ones on the 2nd post are still working. Just download the zip file which has '9502' in its name, unpack it to anyware you want on your PC, connect your device to it through the USB cable, and make sure ActiveSync is running. Then, double-click on the unpacked EUM SFX exectutable file and follow the steps.
Good luck!
Carlos
Click to expand...
Click to collapse
Dear Carlos,
Really appreciated for your kind guiding!
As what you guided, i am on the way to follow it, and some more stupid questions need to through more:
1. I am having SpriteBackup v6.0.2 Build 2065, is this the lasted ver up to now? And does it back up all PM registered as before?
2. What is Reflashing? of course i have Rom lockcode now
3. Run ActiveSync 4.5 from PC and also activate Sync function on 9502, right?
Thank you and best regards, waiting for you reply soon too!
dongni filth said:
Dear Carlos,
Really appreciated for your kind guiding!
As what you guided, i am on the way to follow it, and some more stupid questions need to through more:
1. I am having SpriteBackup v6.0.2 Build 2065, is this the lasted ver up to now? And does it back up all PM registered as before?
2. What is Reflashing? of course i have Rom lockcode now
3. Run ActiveSync 4.5 from PC and also activate Sync function on 9502, right?
Thank you and best regards, waiting for you reply soon too!
Click to expand...
Click to collapse
1. Mine was 6.2.2 Build 2280. It was newer than yours, but, from your question, I've just gone to www.spritemobile.com and found version 6.5.4.16 there. I'm presently installing it,
2. Reflashing is the process of updating the ROM on your device. For all recent i-mate devices, the EUM SFX application running on your PC will require the ROM lock code to procceed.
3. You must have ActiveSync installed on your PC. Its mobile version will automatically run on your device when you connect it to your PC. They will comunicate with each other in order to synchronize your PIM, media and other files you'll specify the first time they are connected.
Cheers!
Carlos
Who can download this 2 roms ? ita and arabic
https://www.imate.com/Support_DeviceSupport.aspx?key=18bfc33f-3cfd-4abc-8fda-1ec0bd9ae6a5&cmd=roms
borce_razor said:
Who can download this 2 roms ? ita and arabic
https://www.imate.com/Support_DeviceSupport.aspx?key=18bfc33f-3cfd-4abc-8fda-1ec0bd9ae6a5&cmd=roms
Click to expand...
Click to collapse
The arabic WM6.1 ROM is here, and the italian WM6.0 one, here.
Enjoy!
Carlos
Thx mate
Imate 9502 Official ROM (Winmo 6.1 English)
Dear all,
I just bought Imate 9502 (second hand/used phone).
I can't log in to Imate website, maybe the Imei number had been registered by previous owner..
Can anyone upload that ROM for me?
Thanks
XboeD said:
Dear all,
I just bought Imate 9502 (second hand/used phone).
I can't log in to Imate website, maybe the Imei number had been registered by previous owner..
Can anyone upload that ROM for me?
Thanks
Click to expand...
Click to collapse
You can find the English v01.77 WM6.1 ROM mirrored here, the Arabic one (with the same build and version) here, and the Italian v01.42 WM6.0 one here.
Hope one of them can fit your new device...
Enjoy!
Carlos
Dont know if this is right place to post:$
hey guy..please don't get angry i just hacked my wizard yesterday so i really don't understand much about all this imate hacking
my question is.. can imate ultimate 8502 be hacked ?
like i installed cracing's rom in my wizard soo is it possinle that there is a different roam for imate ultimate 8502
if its there can you please provide me with the link?
thankyou so much
konvikted said:
hey guy..please don't get angry i just hacked my wizard yesterday so i really don't understand much about all this imate hacking
my question is.. can imate ultimate 8502 be hacked ?
like i installed cracing's rom in my wizard soo is it possinle that there is a different roam for imate ultimate 8502
if its there can you please provide me with the link?
thankyou so much
Click to expand...
Click to collapse
so difficult to answer you question! you said alread hacked it, now you want to know if it can be hacked?!
If the 8502 is internation version, so no need to hack anything, just up the newest WM6.1 for it! Done!
good luck dude
casouzaj said:
You can find the English v01.77 WM6.1 ROM mirrored here, the Arabic one (with the same build and version) here, and the Italian v01.42 WM6.0 one here.
Hope one of them can fit your new device...
Enjoy!
Carlos
Click to expand...
Click to collapse
Hey there,
Just a quick question. I've been looking for the WM6.0 English since quite sometime now but no luck.
Could you guide me where I could find the WM6.0 for 9502? If there is a custom version also I don't mind trying it.
Also would like to know if there is a WM6.5 version released for imate Ultimate 9502?
Thanks.
Ecronic
ecronic said:
Hey there,
Just a quick question. I've been looking for the WM6.0 English since quite sometime now but no luck.
Could you guide me where I could find the WM6.0 for 9502? If there is a custom version also I don't mind trying it.
Also would like to know if there is a WM6.5 version released for imate Ultimate 9502?
Thanks.
Ecronic
Click to expand...
Click to collapse
The stock WM6.0 ROM was really buggy. No wonder why i-mate hasn't made it available at their website. However, if you really plan to downgrade your device, I don't see other option than learning italian beforehand.
Regarding WM6.5, I'd like to flash it too, but, unfortunately, I don't know any cooked WM6.5 buids for our devices.
Sorry for not being able to help you any further...
Cheers!
Carlos
casouzaj said:
The stock WM6.0 ROM was really buggy. No wonder why i-mate hasn't made it available at their website. However, if you really plan to downgrade your device, I don't see other option than learning italian beforehand.
Regarding WM6.5, I'd like to flash it too, but, unfortunately, I don't know any cooked WM6.5 buids for our devices.
Sorry for not being able to help you any further...
Cheers!
Carlos
Click to expand...
Click to collapse
re 6.5 cooked roms, are there any utils around for these devices? if so i might try and cook one or assist if anyone has already made a start?
dan
help me.
what's the key combination to do hard reset 'i-mate 8502.
thanks
suris said:
help me.
what's the key combination to do hard reset 'i-mate 8502.
thanks
Click to expand...
Click to collapse
In theory, you should press and hold 3 keys: the blue Fn, the green Send, and the Power buttons at the same time. When you release them, a white screen should come up asking for confirmation. You should confirm with the left softkey.
Nevertheless, the last time I tried it didn't work for me as such. I had to replace the Power button by the reset pin, i.e. it worked only when I pressed and held both the blue Fn and the green Send buttons, and, at the same time, I pressed the reset pin with the stylus pen. At the moment I released the buttons, the screen confirmation came up.
Good luck!
Carlos

Categories

Resources