I keep having to reset my phone preferences (such as my ring- I only want it to ring once) but it keeps resetting the settings to the default for the phone.
Is anyone else having this happen on their Sprint TP2?
***bump***
are you changing your ring settings through the touch flo 3d shell (settings>sound) or going through the traditional windows mobile settings (settings>sounds & notifications)?
My ring settings stick for both methods (or my phone says). I don't get calls enough for me to notice if settings stick.
maybe your ringtone is very long, so it sounds like it's ringing more then once?
I do experience a setting that I want to stick but doesn't. when you open phone, you choose menu > view. Default is "calls and contacts" but I only want "all calls". I can choose it and it'll filter, but when I close phone and reopen, it'll reset to "calls and contacts". =/
Thanks, Tone.
The ring is not long- it's an old fashioned phone ringer. The actual setting changes fron "Ring once" to "Ring."
I am setting it under the options on the dialer screen. I haave also gone through "Settings"; makes no difference.
So I recently hard reset my phone due to some other issues, but I tested if your problem again, and the settings are still fine on my end.
Out of curiosity, do you know what Manila version you have (along with what phone version)?
Mine is Sprint, Manila version 2.1.38416.1.
You can find the manila version with Reg Edit and go to "
HKLM\Software\HTC\Manila"
String Value "Version" tells you the Manila version.
If you don't have reg edit, or don't know how to do it, that's ok, just phone version should be enough. I've been discovering from customizing my phone and researching on XDA, that Manila may have different bugs depending on what Manila version you have (and most likely a different Manila version is attached with different carriers).
Same Manila version.
Has been hard reset twice, but the problem persists...
oh boo, that sucks. if you have a phone replacement/repair plan with sprint, I say go to them and tell them the issue. I always ***** at sprint with whatever problem that can't be solved. it's a defect in the software/hardware and if you have the replacement/repair plan, they won't charge anything for repairs. and if they can't repair it themselves, they'll send out a request for a 'new' phone replacement. sometimes its brand new, sometimes its refurbished. depends what they have in stock.
I can not get my phone to filter contacts by just device contacts it always defaults back to all contacts making me have dupes. Anyone else have this or know how to make the setting stick?
bonestock said:
I can not get my phone to filter contacts by just device contacts it always defaults back to all contacts making me have dupes. Anyone else have this or know how to make the setting stick?
Click to expand...
Click to collapse
this is what I do (if you have contacts on your sim).
enter phone app (call button).
press "contacts" (left soft key) to open contacts (manila shell).
press "menu" (right soft key).
choose "view".
listed is "all", "contacts" and "sim". choose "contacts" to list only device stored contacts.
settings stick for me. but I don't have contacts on my sim card to verify. however, the setting itself doesn't change back.
if you go to contacts (windows app version), I believe you can't do this, because there is no option for it.
this is one reason why I think manila is kind of retarded. it just covers up windows mobile, but there are still multiple front ends / GUI for the same things.
no real help, but i set my phone to ring and vibrate, and every now and then it reverts to just ring!!!
I was having the same problem until I noticed
the Single Volume control. It is above the Phone
controls on the settings panel. I turned it off
and now the phone ring settings stay the way I
set them.
it's a known issue for Sprint TP2's. it will be fixed with ROM update to WM6.5. in the meantime, check out this thread http://forum.ppcgeeks.com/showthread.php?t=83378&highlight=jfrancisny&page=4. Post #36 fixed it for me.
Related
Is there a way to repeat "Play Sound" until you acknowledge the incoming text message? Repeat is grayed out in the notification area. Any help would be appreciated.
Thanks, Allen
Hi Allen
I use DontForget for this and its a pretty good freeware/donationware program
http://blog.softimage.cz/?page_id=83
Its designed for WM5 smart phones but will work on any WM5 with a small registry tweak:
quote from developer Hujer:
However, you are running DF on the PocketPC device and it is intended for Smartphones in this version.
The next release version will run on PocketPCs as well (even this is not "real" PPC version).
For now you can try to "fix" it by adding following registry entries.
Please add following keys to you device registry:
Create the key HKCU\ControlPanel\Profiles
Create the key HKCU\ControlPanel\Profiles\Silent
Create the key HKCU\ControlPanel\Profiles\Loud
Create the key HKCU\ControlPanel\Profiles\Normal
Create the key HKCU\ControlPanel\Profiles\Meeting
Now you should be able to run the DontForgetAdmin and set up all parameters.
Please note that due to missing Profiles on PocketPCs you have to switch off following options in the Admin:
- deactivate in following profile:
- switch to following profile (in both deactivation and re-activation section)
Click to expand...
Click to collapse
Enjoy!
"Dontforget" "dont" work for me...
I installed it and made the reg entries. But never have been able to get it to work. When I start the admin app I get...
"An unexpected error had occured in DontForgetAdmin.exe.
Select Quit and then restart this program, or select Details for more infomation."
For Details...
DontForgetAdmin.exe
Exception
MISC::HandleAr+0x5b
ComboBox::set_SelectedIndex+0x13
MainForm::MainForm_Load+0xa7f
Form::OnLoad+0x15
Form::_SetVisibleNotify+0x1d
Control::set_Visible+0x1f
Application::Run+0x7
MainForm::Main+0xa
Oh well... I guess I'll have to wait for the upgraded version unless someone has any idea about this???
Thanks,
-Pad
Found this hack on another website, which seems to do the trick (and yes, I did try it first ) - only problem is, the notification seems to carry on "for a while" after you've read/deleted the text message.
Give it a go, see what you think.
Mark.
Repeat notifications for text and email messages
Under HKCU/ControlPanel/Notifications find the following keys for Email and Text messages:
A877d65Axxxxxxx
A877d65Bxxxxxxx
Also find Key 15F11F90xxxx for reminders.
Copy the Options value from the Reminders key and overwrite the options value in both email and text message keys with this value (1073741853)
Once you do this, go to start - settings - sounds and notifications - notifications.
Under events, select new email message OR new text message and you'll notice that the repeat option that was greyed out is now enabled and can be selected.
You need to power off (NOT Soft Reset!!) your device to ensure that the HKCU registry hive is written away correctly.
Click to expand...
Click to collapse
I personally use phoneAlarm. Don't use this feature, but it can do the trick.
Great. But how do I...
Mark, Great reg hack but I have a question...
How do I tell which key is for what message applet?
Email ?
SMS ?
Palm SMS ?
Etc.
You have listed them for email and sms but is there a way to tell from within the key which one is for which msg applet?
Also, does anyone know where the value of "1073741853" is derived from?
@Padawan,
Each of the keys has a description field - just click on it in PHM RegEdit (or whatever you're using) and you can see what type of message action it relates to; e.g. A877d65B-xxxx-xxxx has "Messaging: New Text Message" as the value of the "Default" key.
The value "1073741853" is equivalent to 0x4000001D, and it's obviously some sort of bit mask - don't ask me what each bit means, coz I ain't found that out yet!
One other thing - the "Duration" key seems to be the length of time (in minutes) you want the notification repeated for - as I said earlier, it keeps going even if you've read/deleted the message, so it might be prudent to set it to 5 minutes in the Start | Settings | Sounds & Notifications | Notifications screen (it's the "Flash light for" setting). Setting it to zero/ seems to keep it going forever (well, I got bored of listening to it after 15 minutes and did a soft reset to shut it up ). You can also change it to another value (mine's set to 2 at the moment) using the registry editor.
Bit of a long reply, hope this explains everything in a bit more detail
Cheers,
Mark.
Repeat notifications for text and email messages
Under HKCU/ControlPanel/Notifications find the following keys for Email and Text messages:
A877d65Axxxxxxx
A877d65Bxxxxxxx
Also find Key 15F11F90xxxx for reminders.
Copy the Options value from the Reminders key and overwrite the options value in both email and text message keys with this value (1073741853)
Once you do this, go to start - settings - sounds and notifications - notifications.
UNder events, select new email message OR new text message and you'll notice that th repeat option that was greyed out is now enabled and can be selected.
Read, read, read and read again......
I already posted that...about 8 hours ago.....if you'd bothered to read the thread, you would have known that.....
sigh
ok you're right, 1 unuseful post on 237 is acceptable... excuse me :emb:
Fair enough....apology accepted, you're free to go
Mark, Just got the "long reply"...
Outstanding! I thought it was probably a bit mask too.
I owe you a pint if your ever in Indiana.
WM6
Mark, I just realized you are running WM6.
I'm still using WM5 on a Wiz100.
Must be why these mods dont seem to work quite right for me.
Please excuse my momentary lapse of stupidity...
WM5 or WM6....shouldn't matter
@Padawan, I don't understand why these don't/aren't working with your WM5 device - I only upgraded to WM6 over the weekend and I had tried the registry changes before that (though I lost them after a soft reset and never bothered to put them back in) when my Hermes was running WM5.
I don't think the registry changes are the definitive answer - I'd like to find out what all the bits in the 0x4000001D value mean....that might help the solution be a little more elegant.
What is happening to you to make you say "these mods dont seem to work quite right for me" - do you get repeated notifications, or nothing at all??
Mark.
Testing...
Mark, I have not had time to do any real experimentation on what is working and what is not. I'll get some data in a couple of days.
For a little rant... I have tried apReminderPlus- joke, SuperAlert-joke, DontForget- didn't run, PhoneAlarm- bloated, slows my device. Why cant someone make a simple, small footprint, reminder config app that actually works? I love everything else about my Wiz100 except for the awful reminder/notifications disfunction. I would gladly pay for something that worked.
Rant over.
;-)
Don't Forget Does Work
But you have to use a small WAV file. I tried using a ring wav for it and it freaked out. When I used an Alarm1 -3 it's fine. It's working great.
What I don't understand is why do they have to Gray out the Repeat option thats already built into the OS? Seem's like that would be the easiest way for it to work.
Thanks, Allen
Original settings?
Mark, What were the original settings for the registry entries under:
HKCU/ControlPanel/Notifications find the following keys for Email and Text messages:
A877d65Axxxxxxx
A877d65Bxxxxxxx
Also find Key 15F11F90xxxx for reminders.
Copy the Options value from the Reminders key and overwrite the options value in both email and text message keys with this value (1073741853)
(Per your posting). I lost my notes. I thought it was "16". You were right... the notification seems to keep going after you have acknowledged it or dismissed it. Its a little annoying.
Anyway, I found this and am trying it out.
http://www.pocketmax.net/smf/index.php?PHPSESSID=6d01b99b3c3f6d40c466801ad6bee953&board=41.0
Found it on another posting on xda. Small footprint, lean app just for notifications.
Nice little app, will give it a try myself!
@Padawan,
Thanks for your response; as far as the original values for the Email/SMS registry keys go, I thought they were both set to "1" Theoretically, if you go back into the Sounds & Notifications applet, select the New email or New text event and turn off the repeat tick box, the values should revert to their default. I'll give that a try in a few minutes.....
EDIT: The above doesn't work!! What you need to do is to go into the registry keys again and rename "Options" to "XOptions" (or whatever). Then go back into Start|Settings|Sounds&Notifications again, select the Notifications tab and find the "New email" and "New text" events; you'll find that most of the options are un-ticked and that the repeat option is grayed out again - just tick the options you want and the "Options" key get re-created in the registry - mine was set to 13.
Hope this helps....post back with your experiences of the new app - I'd be interested to hear!
Cheers,
Mark.
alarmPal from Pocketmax
Mark, I have started a dialog with Penguin at pocketmax to add support for the PalmSMS and Emoze email inbox event. I'll keep you posted how it turns out. The "normal" sms and email event repeat notifications work fine so far with alarmPal. Give it a try and see what you think...
Pocketmax told be they'll try to get back to me by Monday.
Looks promising so far...
-Pad
A couple of weeks ago I upgraded my 8525 to WM6 with the official AT&T ROM. During this process I remember setting up the Today screen to show three days of appointments and also what the format should be (I set it up for each appointment to say Today, Tomorrow, etc. I think the other option(s) was to display the date in various ways). My phone
now shows appointments for the following three days and says Today, Tomorrow, Sunday, etc. for the day.
I wanted to play with these settings but I can't seem to find any menu that will let me change what is set up. I'm pretty sure I did this during the initil setup right after loading the new AT&T WM6 ROM. Does anyone know where these settings can be changed? I don't want to do a hard reset and lose everything else I have loaded on the phone. I'm wiilling to hack the registry if needed.
Are you using TodayAgenda plugin? The configurator is in \Program Files\TodayAgenda\TAOptions.exe, or alternatively tap and hold anywhere on the today plugin until the options menu comes up, and then goto options.
Thanks for the pointer, but I am using the stock AT&T ROM, no extra plug-ins. If I click on an appointment and go into the Calendar, Tools -> Options doesn't have any settings for appearance or how many days to display. Start -> Settings -> Today -> Items doesn't provide many options for Calendar either.
I looked at the registry under HKLM\Software\Microsoft\Today\Items\"Calendar" and just ...Microsoft\Calendar but I didn't find anything obvious that I could change. Maybe some of the other flags there determine how this works but I didn't want to risk ruining my setup so that's why I'm asking here.
Thanks!
go to Settings > Today > Items, click on the calendar plugin, then click on the options button. Can you adjust it from here?
Alternatively, you can try Calendar+, its a free today plugin with more display options than the default calendar plugin
http://www.mohairsofa.com/Default.aspx/document/10
The settings for the Calendar item under the Today Plug-In don't include anything to change the number of days displayed.
I'm trying to keep the number of add-ins to a minimum. I had Calendar+ with WM5, but it didn't seem to work right with WM6. I can't remember exactly what issue I had, but I ended up doing a hard reset. The last update to this software was over a year ago.
I know the functionality is there in the stock software. If only I could figure out how to control it!
I searched all the forums about this issue but all I can find is things dealing with setting up text messaging. I have no network problems with data, text, or voice I just used the HTC network wizard.
Whenever I get a text message I can see the the beginning of the text in the selection screen but when I click on it the message is blank? So I can't read the whole text. I searched this Forum but couldn't find any people with similar problems. It seems to send them fine I just can't read the whole message for some strange reason. I have been clearing my memory and then flashing my Tmob Dash for the last three Kavana releases, they all exhibit this behavior. Any help appreciated with my problem.
What Rom are you using?
jdoggraz said:
What Rom are you using?
Click to expand...
Click to collapse
Kavana 080408. The texts that I get show up on the main screen with a little bit of the text but when I click on them they don't show anything. I tried pressing all the buttons I can but it doesn't seem to do anything.
See is UNthreading them helps.
Uhm, just a silly guess here, but next time you're on the blank screen, click menu (right softkey) > 5 (Folders) > change to inbox, at least if it's not on inbox already. My friend changed his to sent and couldn't figure out why he couldn't see new ones either hehe
I looked everywhere in the messaging app and also the regular phone settings I don't see anything for unthreading. Also MMS can be viewed and sent normally. Just whenever I try to send or read a recieved text I have problems. When I try to send a text it doesn't let me type anything in at all. Not recipient and not the body of the text.
No I have already gone to all the folders. The inbox folder is where I can see the messages. You can read the begining of them, and who it is from but when you select one it doesn't show anything.
I had the same issue before, the problem disappeared after I uninstalled CE-Star (Chinese-reading problem).. do you have it installed?
Yianaki said:
I looked everywhere in the messaging app and also the regular phone settings I don't see anything for unthreading.
Click to expand...
Click to collapse
Check in Accessibility Folder for unthreading.
DON'T Turn off the Damn active x
I finally fixed this problem.
I had a problem with WM 6.1 will only showing the headers and not allowing you to read the contents of : Text messages, Emails, MMS. This errors would also not allow you to write emails or text messages.
I thought Kavana's ROM had some big error with it but no one else was complaining. I downloaded Ricky's rom but same problem. So this weeked I fooled around with my phone believing it was some program I was installing. Even though I only install Google Maps, TCPMP, YGo, and Windows Live. I would install something then restart. I tried installing them one by one then it seemed to work but still after a time was becoming broken. I thought it had something to do with synching corrupted contact data. So I didn't synch but after a while it still came back.
This morning I finally realized that if you turn off active x it breaks the email and text which I assume both use IE active x The bad setting is.....
Main Settings Menu->IE Settings->Advanced Options -> NEVER TURN OFF ACTIVE X CONTROLS.
I think if Kavana, my personal hero, rolls another ROM you should take out this option.
Yianaki said:
I finally fixed this problem.
I had a problem with WM 6.1 will only showing the headers and not allowing you to read the contents of : Text messages, Emails, MMS. This errors would also not allow you to write emails or text messages.
I thought Kavana's ROM had some big error with it but no one else was complaining. I downloaded Ricky's rom but same problem. So this weeked I fooled around with my phone believing it was some program I was installing. Even though I only install Google Maps, TCPMP, YGo, and Windows Live. I would install something then restart. I tried installing them one by one then it seemed to work but still after a time was becoming broken. I thought it had something to do with synching corrupted contact data. So I didn't synch but after a while it still came back.
This morning I finally realized that if you turn off active x it breaks the email and text which I assume both use IE active x The bad setting is.....
Main Settings Menu->IE Settings->Advanced Options -> NEVER TURN OFF ACTIVE X CONTROLS.
I think if Kavana, my personal hero, rolls another ROM you should take out this option.
Click to expand...
Click to collapse
I am glad to hear that you fixed and resolved your problem, and haha I hope that Kavana makes another Rom, he is awesome. But then again I got to thank Ricky for this rom to I love it.
hello i am having the exact same problem i checked all advice given i.e. make sure it is on inbox folder, check ie active x is enabled, and no change.
any advice
also when u do see the message headers like yianaki but when you select the message and then press a soft key it says"message cannot be signed and/or encrypted"
You need an encryption key for your email and you don't have it on your dash email, maybe. Just a guess. Is there documentation as to what you need to set up your email. What steps did you need to take to get your email on your home computer.
i actually have kavana 6.1 version 080408 so i just used the connection setup for US tmobile. and it was working previous to this problem. i did a hard reset now and its back to normal for now
SWEEEET!
Thanks "Y" you saved my life, I had the same problem. Keep Active x controllers checkmarked "On".
change IE option.
I had the same problem only can view the header of a msg, but can
t see the content. Here is what I did to solve it: go to IE\tools\option\general\encoding\change to Unicode
Cant Open Text Message.
Hi, I'm from Jamaica, I bought my HTC S621 from Digicel Jamaica [here]. I followed the instructions and installed WM6.1 80408 Kavana and it was totally amazing, I did it on Saturday and it worked great, everything was working GREAT. On Sunday I realized I was unable to open my text messages for viewing. When I click Text Message, the colour wheel shows and it starts to open then it closes. I did all the suggested this in this thread but nothing works, any more suggestions please, I really need to send text messages to my work crew and this is a major hindrance. I dont know how to soft or hard reset and would like to try that first, any other suggestion would be great. Thanks.
PLEASE dont laugh or throw tomatoes, I fixed it. In my attempt to load a Yahoo messenger app I installed an SMS application that was causing the issue. Problem solved, sorry to be a bother.
Yianaki said:
I finally fixed this problem.
I had a problem with WM 6.1 will only showing the headers and not allowing you to read the contents of : Text messages, Emails, MMS. This errors would also not allow you to write emails or text messages.
I thought Kavana's ROM had some big error with it but no one else was complaining. I downloaded Ricky's rom but same problem. So this weeked I fooled around with my phone believing it was some program I was installing. Even though I only install Google Maps, TCPMP, YGo, and Windows Live. I would install something then restart. I tried installing them one by one then it seemed to work but still after a time was becoming broken. I thought it had something to do with synching corrupted contact data. So I didn't synch but after a while it still came back.
This morning I finally realized that if you turn off active x it breaks the email and text which I assume both use IE active x The bad setting is.....
Main Settings Menu->IE Settings->Advanced Options -> NEVER TURN OFF ACTIVE X CONTROLS.
I think if Kavana, my personal hero, rolls another ROM you should take out this option.
Click to expand...
Click to collapse
Just wanted to voice my agreement with Yianaki about "Never turn off Active X controls". The whole issue lies in the fact that the text messaging app is basically an Active X control. But I wanted to add the reminder that you need to make sure that the "Text Messages" app gets closed then reopened after you make the change, or it will not appear to work. (Use the task manager/celetask to close it)
I had the exact same problems with text messages: I could send an MMS, receive an SMS, but not send an SMS. When a text message came in, it showed up in the list as expected, but an attempt to view it resulted in a blank area with no useful menu options. I also couldn't send text (SMS) messages out because the create-new-SMS screen was blank and non-functional. It has nothing to do with the threaded vs unthreaded Accessibility settings for the phone, nor do you need to worry about configuring your WAP settings (GPRS and MMSC Settings); the "Connection Setup" app takes care of everything for T-Mobile perfectly. It's all an Active X issue.
PS: This is all on Ricky's v24 "Vanilla" ROM of WinMo 6.1 running on a T-Mobile Dash.
Hello,
This is actually my first post on XDA; in the past I only downloaded the great roms for my older HTC Touch and never posted something. Now I'm the proud owner of the TP2 and have some questions to ask
It's a great phone, but there are a few things I can't get working properly. I'd like to excuse myself for the awful English I'm writing, but that's because I'm a "Dutch guy" (I also have a default Dutch rom btw)
The Questions
[1] GPS, I've applied all of the tweaks I've found on the Rhodium forum for a better GPS response, I've also installed TomTom 7 - v7.910.9185 with Western Europe 1GB 815.2024. When I try to navigate I don't get an GPS fix, the gps on my TP2 has never worked before. I also tried 'quick gps' for getting some gps settings, but that also didn't work.
[2] On my old HTC touch I could press the battery-icon on top of the taskbar to quickly see the remaining battery-power. Now you get the 'notification screen'. The notification screen is quite good, but I'd like to see my battery-power in just one or two presses.
[3] I'm using Opera browser and when I go to any kind of websites, which have thumbnails of images on it, I have to press several times before the phone opens the link 'behind' the thumbnail image. I also can't select any text on a webpage. How do I fix this?
[4] On my sms inbox I want to select multiple messages with just a sweep on the touch screen. I've read somewhere on the forum that you can change this with a simple registry tweak, but I can't find it anymore.
[5] the TP2 has I nice Facebook future, here in the Netherlands Facebook isn't that popular, Hyves is the rulling social network over now, does anyone now if HTC is going to release a Hyves plugin instead of facebook?
[6] the TP2 stores contact pictures in a larger format than outlook, but because I've imported some photo's to my contacts via outlook, they all have a resolution of 72x72px, which looks quite blurry at my touch pro.. is there any option to increase the resolution of the outlook contact pictures? I've searched on the net, but no luck so far..
[7] I've installed the .cab which gave me the option to delete the first 4 icons on the start menu, but I accidently removed the 'settings' icon, and can't set it back anymore..
[8] My last question, where did the 'audio manager' go? On the tabs you've something like audio manager, but it's always running on the background, right? I want to start it at my own.
In the past; on my HTC touch, I've mapped the camera hardware button to launch 'audio manager', but on the TP2 it isn't even listed anymore at the program list.
Thank you for reading and helping me out!
Brent
EDIT: [9]whoops, another question came up in my mind.. Is it possible to activate the light sensor all the time? When I'm calling someone the screen turns off when you hold the phone next to your ear.. this would also be an nice option for putting your mobile in your pocket or something.
[1] solved: I did a hard reset and then it worked
[2] solved: I installed a customized notificationscreen
[7] solved: After the hard reset the icon was back
Hello all! I"m hoping someone can help me out here. Recently, I was given a free upgrade from the Sprint TP (Raphael) to the TP2 (Rhodium). While reloading my new phone with my previous roms, emus and cabs... I destroyed my dialer. KDialer skins is obviously not compatible with the TP2 and now my dialer is cut off... and not alligned (I have to hit 123 for 456 for example). I found Juggalo's TP2 skin and loaded that, but now I am missing the talk/end buttons, and slider for incoming calls (can still see my start page where that is supposed to be). How can I fix this with out doing a hard reset?
move the slider over to settings, then select all settings. Select system and then in there select "Clear Storage". This will erase the phone and take it back to the OS you got with the phone.
It' may not be the only way but it's probably the best way to get your phone dialer and all controls back.
Thanks, but after searching for a couple hours I found the resource file names for the dialar .bpm's and deleted them. Installed a Rhodium Black Dialar and I'm all set.... (BTW, the point of me posting this question was to do this W/O a hard reset, thanks for trying... )