Hi
I have the T-Mobile G2 Touch and a Motorola S9 headphones. Using the Origianl Stock T-Mobile ROM i have had no issues with bluetooth.
BUT
using the generic 2.73 ROM i have issues with connecting to the headset
It will connect, then instantly disconnect, then try to connect again, at which point it fails to connect properly
To Reproduce:
Using a HTC Hero & 2.73 ROM
Pair your S9's with the Hero
then Turn off the S9's and Bluetooth
Then turn on Bluetooth, and the S9's with the Bluetooth Settings up
you will see it say "Connected with Media", "Paired but not Connected", then "Connecting......." at which point it will fail
I have tried all the different radio versions to make sure it isnt a issue with the radio, but the same problem prevails.
Does anyone have any ideas on how to fix this issue? or what is causing it?
Related
Hi all
I've searched for this issue on the forums but can't find anything that addresses my particular problem. I was wondering if anyone had any thoughts or suggestions.
I'm running CM 7.1.0 stable on my HTC Desire GSM and all is well - all except bluetooth. I don't seem to be able to pair with any devices.
The particular device I'm trying to pair with at present is a PLT BB903+ headset. I know the device works fine since I was able to pair with it when I was running stock Sense and I can pair with it using my wife's BlackBerry without any issues.
The device always appears in my list of found devices, whether it's in pairing mode or not, and even if it's switched off. I've wiped my Bluetooth pairing data using Titanium Backup but it still appears there as "Paired but not connected". Trying to connect fails but no error message appears. Unpairing then repairing has the same result - failure, no error message, and the next time I scan for devices it still appears as "Paired but not connected".
I've installed "Bluetooth File Transfer" from the Market as suggested elsewhere. When I attempt to pair using this I get the message "Pairing operation was aborted by user".
Any thoughts? Anyone had similar issues, resolved or otherwise?
Miz.
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Bluetooth issues
Mizake said:
Hi all
I've searched for this issue on the forums but can't find anything that addresses my particular problem. I was wondering if anyone had any thoughts or suggestions.
I'm running CM 7.1.0 stable on my HTC Desire GSM and all is well - all except bluetooth. I don't seem to be able to pair with any devices.
The particular device I'm trying to pair with at present is a PLT BB903+ headset. I know the device works fine since I was able to pair with it when I was running stock Sense and I can pair with it using my wife's BlackBerry without any issues.
The device always appears in my list of found devices, whether it's in pairing mode or not, and even if it's switched off. I've wiped my Bluetooth pairing data using Titanium Backup but it still appears there as "Paired but not connected". Trying to connect fails but no error message appears. Unpairing then repairing has the same result - failure, no error message, and the next time I scan for devices it still appears as "Paired but not connected".
I've installed "Bluetooth File Transfer" from the Market as suggested elsewhere. When I attempt to pair using this I get the message "Pairing operation was aborted by user".
Any thoughts? Anyone had similar issues, resolved or otherwise?
Miz.
Click to expand...
Click to collapse
I wish someone could reply on this..... I have the same problem. Is it an issue with the Radio??
appreciate any help
There sometimes is a Reset-Button on under the Panel. Take it off and see if there is something.
i`m on 7.1.0 and my bluetooth works fine pairing with an alpine CDE-133BT.
But i have a different Issue:
a crackling and swishing noise in the background as soon as the bluetooth-channel opens for a2dp... with loud music it`s not hearable but with soft and quiet music it`s so annoying!
tried cm7 stock kernel, different Manu`s and Tiamat`s and i flashed the latest Radio... I think i try a different ROM... let`s see...
Situation:
I'm using a Xlink bluetooth gateway in my house to connect my phone with and I also have a Mazda CX-5 with integrated Bluetooth system with the latest update from TomTom and Mazda. In the Mazda, I use the Bluetooth mainly for the phone, but occasionally use it to stream audio.
Phone:
T-Mobile samsung S2 x SGH-T989D with ICS 4.0.4 (Rogers leak)
Issues:
At first (With official Gingerbread)... everything was working fine. Both device paired and all functionality worked.
Then, applied official ICS update from Kies software ICS 4.0.3 and Bluetooth issues started. I first paired my Xlink device. So far it worked. Then tried to pair my Mazda, everything was really slow but managed to have it work. Turn the car off, get back in the house and the phone is now able to pair with my Xlink device, but cannot connect as a phone audio. Even if I go manually in the Bluetooth menu and try to activate the Phone audio it wont work. Only way to have it work again is to unpaired the Mazda and reboot.
After reboot, the phone works great in the house with my Xlink device. Going back to my car and try to pair my Mazda. Same issue. The phone does pair with the Mazda, but I'm unable to make a call since the phone cannot activate the Phone audio.
Look online and have tried the ICS 4.0.4 (Rogers leak) and same issue with Bluetooth.
The only way my devices works perfectly is when I only pair with one device at a time. There is something happening when you pair more than one device, even if not both device are turned on or in range.
Anybody got the same issue or a fix to that?
Thank you and sorry if my post is a little long... but that issue is the only thing that make me not enjoy my phone.
I have Galaxy NEXUS yakju, otad stock 4.1.1 stock everything. But every time I try to connect to my platronics k100 it doesn't show on the list. I have to reboot both devices several times before my gnex sees the platronics. I then go to pair the device but I get cannot connect to pk100 either wrong pin or passkey. I cannot find away to enter a passkey. I tried clearing the Bluetooth cache to see if that helps but nothing. Anyone else have this issue? Anyone have a fix? Could this be because of the new radio that dropped? I never had this issue with ICS.
I'm also stock 4.1.1 GNex. I had perfect BT behavior with several devices with ICS, now have a problem with my car's built-in BT hands-free phone (2007 BMW 328). Pairing is fine. About every other phone call I'm told they can barely hear me over the noise but my audio is fine. I've paired and unpaired, and I did a complete wipe before installing JB. Very frustrating since everything worked great with ICS. Also no problems with 2 other BT headsets and connecting to 2 different PCs via BT.
Hello,
Did either on of you find a fix for this?
Thanks in advance
Bluetooth Connectivity Problem
I Am Not able to receive files via bluetooth In my G-NEX
When SOmeone tries to send it it shows "Content Not supported" when it was sent from HTC ONE X And Display that "Transfer Complete " when tried from HTC ONE V
Please help me with the problem!!!
So I'm running cloudy G3 on my D850, but this doesnt seem to be specific to that ROM, since nobody else has reported it.
My issue is that once I connect to my car radio, it connects and works perfectly, but once I turn the car off and it disconnects, the saved bluetooth connection disappears and I'll have to go through the pairing process all over again. Anybody have issues similar to this? I know the bluetooth stack in 5.0 is buggy and I'm sure its related to that.
Hello there. I've been experiencing a problem with my OP3, regarding the BT connection to my car stereo.
I recently bought a new head unit for my car, a Pioneer MVH-X580BT unit, it Works fine. However, when i connect my phone to it, it allows me to playback áudio, but i won't allow me to use it for hands-free calling. The Bluetooth menu on the phone says "MVH-X580BT - Connected (no phone)". It happens with any CM-based rom that i've tried so far.
However, when i install a stock rom (Oxygen OS, Freedom OS also works), it works just fine, both audio and phone mode.
Is there something in custom roms that changes some sort of parameters in the ROM that makes the phone refuse a phone mode connection from the radio?
Any tips i can use?
Thanks!
logcat of the incident:
Here.
Hope it helps.
I've had the same problems. It's an issue with the LOS BT stack. I've created several unofficial versions of my favorite ROMs using a different BT stack that fixes this problem for me. Let me know if they work.