Develop Bugs

contacts in SMS

somehow in Schaps 4.22 I have problems with SMS
when I enter a name in the To: area. I cannot get a list of contacts showing up.
IE. I type "da" , when in Black Satin, I got the contacts for "david", "daniel" etc. showing and I could choose the contact for the SMS. (similar to smartdialling"
Now in Schaps 4.22 (same in 4.01 and 4.2) I have to press To. and then enter in the contacts screen to get the same effect as earlier.
searched throughout the Wiki but, can't find anything, but, it is difficult to explain the problem.
wonder if there is something I need to set?

strange 69 views and appears no-one has the same problem.
wierd
any solution would be really appreciated

Hard reset? Reflash?
I had this in some previous roms, before official comes.
Maybe it's some 3th party application?

@klabton
finally solved this one, it was the TOUCH KEYBOARD that was giving the problems.
Did a HR, then one-by-one put back, contacts, etc. checking SMS at everystage,
After installing the Touch Keyboard Cab, it went wrong, removed the cab, back to normal.
Will revert to PCMKeyboard

Default enable XT9 for physical keyboard layout

Hi guys,
Bit of an annoying one this that I hope one of you extremely clever registry devs can tweak for me.
When writing emails / text messages i always use the physical keyboard, however I like the XT9 setting as it automatically spell checks and inserts capitals / punctuation etc.
The problem is i can easily set it to XT9 in the settings or by opening the software keyboard and pressing the ABC / XT9 button
or
by using the green function key, space (XT9), XT9 English
but as soon as I've completed my message or turned off the handset etc. it's forgotten, meaning I have to do this manually each time.
Is there any way to set default as XT9 in registry?
Kind Regards
Darren

Anybody got any ideas here? Driving me mad doing it manually every time.

I've just got my new TouchPro2 and I'm suffering from exactly the same problem. I love the new phone but this is the one thing that's driving me nuts!

I used to have it in my TPro and now it's gone missing in the TP2

I know, well you can still use it but many keypresses per use.
Slightly annoying.

I find this highly annoying too. I don't see why it can't be in XT9 as standard or at least just remember the last setting used!?

It's working!!! I've just found out that if you activate T9 in the Full QWERTY virtual keyboard, you'll get it work using the hardware keyboard.

did you not even read the original post?
of course it works like that, however only for that session. as soon as you're done and try and send another text or email etc you'll have to press those buttons again to activate it.

I don't have any problem typing using T9 messages after another using the hardware keyboard...
Even after I soft reset it, it's still working

haha brilliant, worked it out.
Here's the fix...i think.
Open new message in portrait, open software keyboard, click XT9 and then OK to close the window.
Rotate handset and do the same, open software keyboard, select XT9 and quit using "OK".
After this it should default to XT9.
You need to use the OK to close though and save the setting. If you send or cancel your settings will be forgotten.
This will save for all portrait and landscape modes. You'll need to do it for each area but i can agree that i have it saved in texts and emails now.
No more having to repeat actions over and over again.
Edit: seems to only save sometimes, also totally unable to save the XT9 setting in Touchflo conversation mode with text messaging.

bump...
I really enjoy using the functionality of xt9. And subsequently would greatly appreciate it having it available while using the hardware keyboard. any thoughts of having this available by default without having to set it to XT9 each time i open the keyboard
There has to be a registry setting somewhere...

dazkeirle said:
haha brilliant, worked it out.
Here's the fix...i think.
Open new message in portrait, open software keyboard, click XT9 and then OK to close the window.
Rotate handset and do the same, open software keyboard, select XT9 and quit using "OK".
After this it should default to XT9.
You need to use the OK to close though and save the setting. If you send or cancel your settings will be forgotten.
This will save for all portrait and landscape modes. You'll need to do it for each area but i can agree that i have it saved in texts and emails now.
No more having to repeat actions over and over again.
Edit: seems to only save sometimes, also totally unable to save the XT9 setting in Touchflo conversation mode with text messaging.
Click to expand...
Click to collapse
Did this work for someone else? Not for me!

emanuel-paul said:
Did this work for someone else? Not for me!
Click to expand...
Click to collapse
It does "per session" but it does not stick on program close/reset.

boooooooooooooooooooo....man i hope someone can figure this out

Has anyone figured this out? It's really annoying that I have to enable XT9 with several different keystrokes at the beginning of any txt msg...
(Using the 9/14 NRG 2.1 STD ROM.)

HD/WVGA Tweak
On some customer ROM's I have seen a program called WVGA or HD Tweak. I searched and found CAB file for this as well. In this software, there is an option to turn on X9 all the time. You can also set how many suggested words to pop up. It reminds me of how the WING would operate when it suggested words!

Wow, thread starter, you read my mind. I've been looking for something like this since the day I got my phone.

tabecho said:
On some customer ROM's I have seen a program called WVGA or HD Tweak. I searched and found CAB file for this as well. In this software, there is an option to turn on X9 all the time. You can also set how many suggested words to pop up. It reminds me of how the WING would operate when it suggested words!
Click to expand...
Click to collapse
This turns on Windows Default X9, which makes phone SIP & compact qwerty SIP inoperable (only outputs numbers). So, this in no way is a fix.
And, the cab you're referring to is EZInput 1.5 specific, has 0 affect on EZInput 2.x.

cmd512 said:
This turns on Windows Default X9, which makes phone SIP & compact qwerty SIP inoperable (only outputs numbers). So, this in no way is a fix.
And, the cab you're referring to is EZInput 1.5 specific, has 0 affect on EZInput 2.x.
Click to expand...
Click to collapse
same thing happened to me when I tried to use it. Turns the phone SIP inoperable.

no solution for this issue yet? (aka, bump!)

Please help with dialer!!!!!

Hello all! I"m hoping someone can help me out here. Recently, I was given a free upgrade from the Sprint TP (Raphael) to the TP2 (Rhodium). While reloading my new phone with my previous roms, emus and cabs... I destroyed my dialer. KDialer skins is obviously not compatible with the TP2 and now my dialer is cut off... and not alligned (I have to hit 123 for 456 for example). I found Juggalo's TP2 skin and loaded that, but now I am missing the talk/end buttons, and slider for incoming calls (can still see my start page where that is supposed to be). How can I fix this with out doing a hard reset?

move the slider over to settings, then select all settings. Select system and then in there select "Clear Storage". This will erase the phone and take it back to the OS you got with the phone.
It' may not be the only way but it's probably the best way to get your phone dialer and all controls back.

Thanks, but after searching for a couple hours I found the resource file names for the dialar .bpm's and deleted them. Installed a Rhodium Black Dialar and I'm all set.... (BTW, the point of me posting this question was to do this W/O a hard reset, thanks for trying... )

Haunted by message sent bubble

I have looked and can't seem to find the right solution. Obviously it is well known the small issue with the "SMS/MMS Message Sent" Bubble. I edited the registry so it would go away. About a month later it came back after a restart. I went back and changed the registry but this time it didn't go away. I found the .cab fix and installed it and it worked fine. However, once I restart it returns and is unaffected by registry edits for some crazy reason. The only thing that works is the .cab fix but it returns once I have to restart. Is there any reason it would ignore the registry edits and continue to come back?

This is TP2 with Stock WM6.5

sometimes reg edits don't stick after a soft reset. Try changing the registry, exiting out of the reg editor app and then power off the device (hold down power button) instead of soft reset. then boot it back up.
Also you could try to install advanced config and set it to not show the message sent notification from that app and see if it does a better job

No luck, the registry is set so both the HTC and verizon bubbles don't show up but I still get it, not both just the bubble one whichever one that is. Makes no sense.

Tried advanced config. Was already set to all notifications disabled. Not sure what else I can do

sms notify bye bye
LostScooter said:
I have looked and can't seem to find the right solution. Obviously it is well known the small issue with the "SMS/MMS Message Sent" Bubble. I edited the registry so it would go away. About a month later it came back after a restart. I went back and changed the registry but this time it didn't go away. I found the .cab fix and installed it and it worked fine. However, once I restart it returns and is unaffected by registry edits for some crazy reason. The only thing that works is the .cab fix but it returns once I have to restart. Is there any reason it would ignore the registry edits and continue to come back?
Click to expand...
Click to collapse
there is a cab 4 this i use it on my 6.1 tp2 just searh it

Not bye bye
As I said before I used the cab file before, it works until I need to restart and it comes back

LostScooter said:
Tried advanced config. Was already set to all notifications disabled. Not sure what else I can do
Click to expand...
Click to collapse
Where can I find the cab for this "advanced config" app?

JohnCody said:
Where can I find the cab for this "advanced config" app?
Click to expand...
Click to collapse
Just use the main forum search and look for "advanced config"
...which will lead you to THIS thread

Thanks for the link - it was late last night - sorry for being lazy

JohnCody said:
Thanks for the link - it was late last night - sorry for being lazy
Click to expand...
Click to collapse
No prob, we all do the same sometimes, and I figured that might be the case, so I went ahead and put the link in too Let us know if it works for you!

I too want to disable the "SMS Sent" bubble.
But when I ran adv config, it said that that feature was already disabled, so I guess I will try turning it "ON", then off and see if that works - and report back.

Well that doesn't help me...idk why my phone feels like ignoring the advanced config and the registry...can anyone help. Cab doesn't fix it, reg edit doesn't work, and advanced config doesn't

Is there more then one cab file made for this? I never had this issue with 6.1

Anybody know the answer? This is driving me nuts

I don't know which ROM you are running, but try setting the HKLM\Software\Microsoft\Inbox\Settings\SMSNoSentMsg=2. That has worked for me in the past with the stock verizon 6.1 and 6.5 ROMs.

Wow looks like it worked. Why that works I have no idea. I am running Stock 6.5. Thanks a lot! Hopefully it doesn't come back again

+1 for the change value to 2! Thanks! I did it on my TP2 with 6.1 on it and since going to stock VZW 6.5 it was driving me nuts! Couldnt remember how to get rid of it again

[Q] Spell Check woes

Hi, I have got a UK Touch Pro 2 branded Vodafone but it has the latest standard HTC WM 6.5 ROM installed (after Hard SPL).
I have installed TomTom and fixed the BTTrayCE error that created and also patched the clock which annoyingly wants to always show a time 1 hour and 2 mins behind, before flipping down like a 70s alarm clock to the correct time. I’m sure the programmer thought this was fantastic, but it’s just annoying and pointless! (/rant).
My problem is that I can’t find the spell checker. On my older XDA phones and my Touch Pro 1, in text messaging after typing a message, I just did Menu --> Spell check. It even allowed me to add words which it stored in the custom.dic file which I have been carrying from device to device as I upgraded phones.
However, even using the ‘proper’ text messing in Messages-->All Messages --> new message, when I click on the menu button all I get is “Add Recipient, Insert >, Quick Text, Save as Draft and Discard”. There is no spell check option!
The Vodaphone ROM which was slow and full of bloatware and incorrect settings for my network did have a spell check under menu – as did all the previous versions of WM.
I have tried enabling the XT9 feature and it does the XT9 thing of suggesting words and selecting them when you press space. This is quite rubbish for two reasons, it doesn’t auto correct i to I and you have to watch each word carefully, because if you type “hell” it might autocorrect it to “he’ll” depending on what you last chose. This results in having to go back and change about 5 - 10% of words, which is really annoying.
I have fiddled with the XT9 settings under Start/settings/all settings/personal/input/options and the only selectable input method is “Touch Input” although the hardware keyboard works and the options don’t seem to make much of a difference.
I have been searching for 4 hours now and hope that you might be able to help, please!!

Does anyone have a similar problem? Does anyone know if the standard HTC ROM should have a spell checker or not?