KforTP no longer works? - Touch Pro2, Tilt 2 Windows Mobile General

I cant seem to figure out why but KforTP has stoped working, I did the clear storage thing because I caused my File Browser to stop working every time I would load it.
During the first install of the KforTP cab it said found BAHBAH.dll(Cant rememebr what it was). After I cleared storage and reinstalled the cab there was no msg saying found suchandsuch.dll. I think this might have something to do with it.
Also KforRaphael does not work either.
Is there anywhy to reformat the Touch Pro 2 to factory settings using something other then clear storage. I dont think this method changes EVERYTHING back.
I would the stock rom off HTC's site to do it on my Mogul but as there have been no updates for the TP2 I cant do it that way. Is there anyway to get the stock rom from HTC and reload it?
BTW I have the sprint TP2 usa version.

Does any one know how to reset KforTP? I dont understand why it stopped working do I need to do a reg fix I dont understand what I need to do to get this working again.
Anyone?

OK well I figured it out, just hit the send and end buttons togeather and hold them down with the power button held down and it hard resets the phone.
Most people are going to be like DUH, but I didnt know I could do that.

Related

Stupid But Beloved Pda

OK my BELOVED X51v screen is on the fritz
(From an erlier post i made from a diffrent thread)
*********((Has any one else experianced flashing lines across the screen that almost looks like stactic off the the TV? I started getting it after I flashed to the newest ROM, I've tried to reflash twice, after the initial flashing, but im still getting the same problem. The "static" even showeed up on the boot screen of the firsat REflash. It seemed to get better but now I picked it back up and it was still doing it just a little bit, but enough to scare the crap out of me and let me know I didnt fix the problem even though it made it like 90% better than what it was, At first i couldn't even read the screen it was so bad. Im hoping I had a bad install with a corrupt file or somthing and not that my bassically new X51V is already broken. Im reflashing to the last rom now hopping that might fix the problem, If anyone knows what might be my problem I grately appreciate any advice. Also if this means anyhting it seems to get even worse when im playing music on it and the screen dims, it was looking fine with the back light on but then screwing up everytime that I turned the light off, I could be nothing because other times it was messed up even with the backlight on.))*******
and i cant find anyway to fix it so im thinking about sending it back to dell to see if they can either replace it or fix it, my ownly problem is i cant send it back with a "cooked" ROM. I tried to reinstall my WM5 A12 rom but when it goes to install the new ROM it disconects from my activesynct and my Windows Mobile Device Center depending on weather im trying to do it on my Vista computer or my XP. I REALLY want my x51v fixed, i tried getting the SD version of the A12 ROM but you have to make it yourself and i cont figure that part out, i can get up to the .nb0 file conversion but for the life of me i cant figure out how to make a .crc file that will work. Does anyone Please know a link to a downloaded pre-converted A12 file or atleast know how to help me figure out the stupid .crc file thanks so much in advance PLEASE help!!!
Drakey83
So Dell is going to send me a new PDA right now and I was just double checking that since I flashed back to the dell WM5 A12 ROM theres no way that they could find out that I used a Baked ROM right?! Just making sure so that my warenty Isn't discovered as void and I have to send my new PDA back.

Having trouble with my tilt

I recently installed some cabs without backing up my tilt. Now, i just wanna go back to the original, like when i got it. I went into settings>system>clear storage. i put in the 1234 like it says and hit yes, and nothing happens. I dont knwo what to do. Please help!
You could always try a hard reset using the hardware buttons like it tells you in the User's Manual from HTC's site.

strange probs with my diamond

hopefully someone can help, ive searched to no avail...
so thursday last week i updated my rom to another rom, which i didnt like so tried another windows mobile 6.5 which i didnt like also. so i eventually decided to go back to my old rom, wm6.1 as i liked that.
so i used activesync to go back, and the phone was back to normal. but for some reason it kept crashing and i did a soft reset, and it proceeded to do a hard reset.
this in fact happened twice, so i thought ok may be the flash was bad.
i downloaded another copy of the rom and updated again.
SAME problem. random crashes, and i lose the control of the phone. i cannot turn off. this time i decide to remove and reinstall the battery. when the phone powers on, it decides to do a hard reset again...
i decide that may be the rom i downloaded was bad from source, so i decide to pick another and use for a few days to see. so i try the latest wm6.5 out now, and whenever i connect to pc it gives me the option to use activesync but i can never connect!!
eg, the "my computer" never shows the 4gb or the phone storage... it only shows it if i pick "disk drive" when i plug in the usb,,
this means i cannot load most of the roms so i cannot pick one.
may be is there a way i can completely wipe the phone memory and then use the hard reset plus back button to load a new rom from the 4gb??
im thinking that may be there are some old files stuck.
i think this because when i plug in the usb it gives me a menu, and the font type and size is nice. i restarted the phone, and now the usb menu font size and type has changed to a really square looking type.
im lost :/
thanks for your help
your strange problem may have been solved at
http://forum.xda-developers.com/showthread.php?t=490182
regarding the format the entice device, it can be done, pls refer to
http://forum.xda-developers.com/showpost.php?p=2451502&postcount=2
thank you. the first link you posted links to a topic which is the exact problem i am having.
also, my instinct was that some files were left behind - i wasnt far off.
now, i need to go and find out how to do this. i had a friend do it all for me, so im a complete noob.
im thinking i should have left well alone!
edit:: any ideas how i get into bootloader mode?
EDIT2:: VOL DOWN & Red RESET
this did not fix my activesync issue...
any other suggestions?
dieselboy said:
this did not fix my activesync issue...
any other suggestions?
Click to expand...
Click to collapse
have u tried to disable Advanced Network Functionality (Settings -> Connections -> UBS Settings -> Untick Advanced Network Functionality)?
dieselboy said:
this did not fix my activesync issue...
any other suggestions?
Click to expand...
Click to collapse
You could also try flashing a stock ROM first and then flash back to custom ROM. This has worked for me in the past.
imatrix said:
have u tried to disable Advanced Network Functionality (Settings -> Connections -> UBS Settings -> Untick Advanced Network Functionality)?
Click to expand...
Click to collapse
thanks you are very helpful. i just came back here to edit my previous post but you beat me to it.
i did this and now it detects windows again. however im really unsure as to why this has now happened. but at least its working.
i hope i dont have any more random crashes and resets... i even thought it may be my PIM backup being restored, so i did a hard reset and format and lost lots of things :/ i even lost some girls numbers as they were in text messages..
oh well, a working phone is more important anyways
thanks for all your help! much appreciated.
i just wanted to come back and say that this has seemed to have fixed the issue. there has not been one single hic-cup, or crash of ANY program on the phone since i did this and re-loaded the rom.
i would also like to say that the phone seems a LOT faster than before. this is the exact same rom i used before, and while when i first used this it was definately an improvement from the sluggish stock rom. however, what i am experiencing now is better still..
if these are the benefits you get from doing a format of the phone, then before i load each rom i might do this first. i see two benefits:
old files wont be there to conflict with the new rom,
the feel of the phone is improved.
i suppose the downside is the limitations on the memory itself. but that would be years before this would be met - i hope anyway.

Keyboard still not mapped correctly after cab install!

I was not the only user having this problem. There was actually a bounty set for a fix, but I havent seen one yet. Flashed Energy Rom Sense 2.5 and 2.1, provisioning didn work, and neither did cab install for correct key layout. Numbers still across the top row, and most symbols still incorrectly mapped. Seems to be first tilt configuration and nothing will change it back.
The strange thing in my case was before I ever flashed ANYTHING SPL, ROM radio...anything...,(bone stock) my HW keyboard would auto remap to these settings out of nowhere. Two different devices had this problem, i took the first one back, and this one being the second. a soft reset would set configuration back to stock before flash, but now even the cabs available will not change anything. I got a $20 for a .cab fix or a detailed xplnation of how to fix this, and have the entire HW keyboard mapped in english and to at&t tilt 2 configuration that will work on this device
Please Forgive the rant in the prior post concerning this issue, as this has become quite frustrating lol, and I have owned every HTC device at&t has sold and loved em all, but had to hunt fixes for every single one. Ive learned a lot in the process, but sometimes time is limited to be able to constantly search for what would seem to be a simple fix. If you will notice, for as long as long as I have been a member of this great community, I have made very few posts, and asked few questions on my different devices ...I read searched and read some more. I had xda google search as my homepage for a loooong time, help on this issuue would be greatly appreciated!!!
What cab did you use? There's a few floating around. I've tried dozens of roms and only seen this issue with one or two ROMs (both 2.5 roms) but went away after a hard reset. Are you hard resetting your device after flash?
Toleraen said:
What cab did you use? There's a few floating around. I've tried dozens of roms and only seen this issue with one or two ROMs (both 2.5 roms) but went away after a hard reset. Are you hard resetting your device after flash?
Click to expand...
Click to collapse
mskip said:
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Rhodium Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to RHODIMG.nbh
4. Copy the RHODIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
Click to expand...
Click to collapse
I thought it odd not to have to do a hard reset as left out in tutorial. I should have done it out of habit from flashing kaiser, and fuze, but no. I did not hard reset. I will try a new flash and do the reset this time. Hopefully thats all thats the problem! thank you very much, and cross your fingers for me lol. If it works I will def keep my word on 20!
DaIn BrAmAgE said:
I thought it odd not to have to do a hard reset as left out in tutorial. I should have done it out of habit from flashing kaiser, and fuze, but no. I did not hard reset. I will try a new flash and do the reset this time. Hopefully thats all thats the problem! thank you very much, and cross your fingers for me lol. If it works I will def keep my word on 20!
Click to expand...
Click to collapse
Just to help troubleshoot after you hard reset just install whichever keyboard cab you're using, soft reset, and test it out before installing anything or syncing.
thank you thank you thank you!
I cant believe thats all it was! Even more so I cant believe I didn even try the H R after flash. I never once failed to do this when flashing any other device, I guess b/c it was in the directions for noobs to do so in other forums, lol may ought to suggest adding it to the dir for flashing tp2 lol!
THANK YOU BIGTIME, once again! I had become frustrated after tryin multi cabs and reading where it worked for everyone else. all i did was re flashed, h-reset. cab was in uc folder, but that didn work, ended up using att provisioning provided by NRG, and there she was...working like a charm again!
Glad to hear it worked! Thanks for following up to, you're the first person with this issue I've tried helping that actually posted a followup.

[Q] ICS alpha 5

Hello everyone, First time posting long time reader. Only rooted about 30 phones so far, so I am still a noob. Well I decided to go ahead and try out the ICS alpha 5. It is working for the most part. Here is my problem. I can not get on the market to download anything. So, I thought maybe a bad install. Powered down the phone went into hboot to rewipe, and reinstall.
This is when things go wrong. Selected wipe, and nothing, so I tried to select install from zip, and nothing. Had to pull battery to do hard restart. So, I was okay, let try this a different way. Loaded the phone backup, and connected to PC, and went to change to MTP so I could transfer over the APK files. It force closes everytime I try to do anything.
Here is what I would like to try and happen. I would like to try another ROM, or another ICS, but I can not figure out a way to get it onto the phone, and with hboot messed up, I am running out of options that I am aware of.
Thank you for any help that is provided, even the bad news. (BTW love the I am noob video)
Personally I wouldn't call having rooted 30 phones a "noob" but that is just me. Unless of course you mean the same phone, 30 different times I've only ever owned the Incredible
Since you claim to be a noob, hopefully this question won't offend you...
Did you remember to flash the Google Apps package liked to in kush's main post?
EDIT: Sorry I didn't read the whole thing so I didn't see that you actually had two problems. For the market problem, see above. For the question about how to get something on to your SD card without MTP...
As tiny4579 below me said, Alpha 5 is supposed to have USB mass storage, so I would use that
If that doesn't work, you can download this
Alternatively, you can use samba filesharing for a wireless option (transfer will be slower)
Or... just download the ROM on the phone, then you don't need to transfer anything
Not sure if MTP works on this phone. Its not available on stock sense. Use USB mass storage and see how that works. I saw posted that alpha 5 should support it. If not there are apps for that.
Sent from my Galaxy Nexus using Tapatalk
demarcmj said:
Personally I wouldn't call having rooted 30 phones a "noob" but that is just me. Unless of course you mean the same phone, 30 different times I've only ever owned the Incredible
Since you claim to be a noob, hopefully this question won't offend you...
Did you remember to flash the Google Apps package liked to in kush's main post?
EDIT: Sorry I didn't read the whole thing so I didn't see that you actually had two problems. For the market problem, see above. For the question about how to get something on to your SD card without MTP...
Click to expand...
Click to collapse
Not offended at all. Just wanted to get that out. I can't install the Google app pack due to not being able to do anything from hboot. I will try your other way you suggested and see if I can get it to work. Thanks for the quick reply.
need to make sure
okay I am wanting to make sure I am doing this right. I have internet access on the phone and am able to surf with it just fine. When I go to the market place via webpage, and click install, It never installs anything. I look in the download folder and nothing. Not sure what other option's I have.
btw, this is the first time I have had any issues, so I guess now is as good as any other time to have one.
Elsore said:
Not offended at all. Just wanted to get that out. I can't install the Google app pack due to not being able to do anything from hboot. I will try your other way you suggested and see if I can get it to work. Thanks for the quick reply.
Click to expand...
Click to collapse
I must be having a bad reading day, because I completely missed the fact that you were having trouble with hboot too.
Elsore said:
okay I am wanting to make sure I am doing this right. I have internet access on the phone and am able to surf with it just fine. When I go to the market place via webpage, and click install, It never installs anything. I look in the download folder and nothing. Not sure what other option's I have.
btw, this is the first time I have had any issues, so I guess now is as good as any other time to have one.
Click to expand...
Click to collapse
If you can't flash the gapps package, then you wont be able to get things from the market, either through the web interface or through your phone.
You can get the gapps package by just opening up xda in your browser and navigating to that post and downloading it from there, but I don't know if you can just extract the zip and install the apks. I think you probably need to be able to flash it, but I'm not sure.
It seems like your best course of action would be to figure out how to fix your hboot, since that seems to be the main problem. If you can't find anything by searching I would create a new, more aptly-titled, post.
yeah, not sure I will be able to unzip it on my phone either. I might just chalk this one up to oops. I might head on over to the store and check out that nexus. This way I will have my ICS already lol. Plus the inc has been a good phone for the many years, but 4.6" screen is just calling my name.
I might have messed up my phone on a subconsciousness level.
Update
Just wanted to give an update. I am somewhat up and running again. What i had to do was take the memory out of my phone, put it in one of the adapters, and format fat32 again, and put the copy of the Stock rom back on it. That has the phone up, Hboot is still jacked up. Going to start a new thread to see if anyone else has had the problems I have. Thanks for your input.

Categories

Resources