Develop Bugs

[Q] Touch Pro 2 will not sync!

Ok, from browsing the forum and the net in general this problem appears all too common. Some definitve advice please??
The scenario-
1/ Sync has been happening with WMDC with no issues since i got it. SUddenly it stopped a month ago.
2/ Phone is still charging.
3/ Have tried several different cables
4/ All settings on phone correct
5/ Have hard reset phone several times
6/ Have uninstalled WMDC several times
Are there any other options??? I want to put the new ROM on but obviously am unable to at the minute. Incidently this inability to syncronise seems to have coincided with a major decline in battery standby time (which hasnt been rectifed even with 2 replacement batteries of different makes).
Are there any definitive answers for this issue??

- Did you try another computer?
- Did you try deleting the usb drivers on your pc?
If you want to flash another rom, you can just go into the bootloader, then plugin your usb cable and flash the same way as you would when using WMDC. Or flash true your sd card
If you go into the bootloader en plugin your usb, you can check if your usb on your phone is still working.

Thanks. Did the first two already. USB isnt recognised from bootloader, so that doesnt sound good.
This phone has an Orange Windows 6.1 ROM. Will i be able to flash the new HTC Rom via micro sd without Hard SPL???

Hardware failure. I guess a new USB connector (or just needs soldering, but this is not recommended) would be required.

I think i have to accept that, and its out of warranty.
Does the genuine HTC ROM need hard spl fashing to my Orange Rom machine from Micro SD??
In bootloader im ending up with a not-allow message.
Is there instruction on forum for hard spl from SD on touch pro 2? Cant seem to find anything via search.

Ok, found the official HTC Orange WM 6.5 upgrade and downloaded.
According to everything ive read, if i simply extract the RUU_signed file and rename RHODIMG.nbh; then place on my FAT32 formated Micro SD root; then put the phone to bootloader: it should work.
It doesnt.
Cany anyone help here or am i doomed to using the original Orange WM 6.1 Rom until i can afford a new phone??

[Q] Htc Desire ermmm bricked :(

Evening everyone
Got a BIG problem with my phone today and having searched and read i still cant fix it
Ok a little about my phone: Rooted with amon recovery, recently s/off, CyanogenMod 7 rom and kernel, -32 radio..
Right here is the problem...
Did a nandroid backup in recovery of the rom i was using ^^ and all seemed fine, i then rebooted my phone,, booted up, waited for everything to work and then i noticed my apps weren't there?
Went into storage and it showed no memory card,, so i rebooted phone hoping this might fix but it didn't.
Plugged my phone into laptop and a message flashed up "usb device not recongnised" i though Sh!t whats happened ?
So i booted my phone into recovery to mount the sd and a message again "error cant mount sd"
Clicked reboot phone and now its stuck on the "why so serious" screen ???????
Ive dloaded the sdk tool but really not sure what i should be typing in there ??
Anyone with a little time care to help me out please lol ???
Cheers
EDIT: I have flashed nearly every rom on xda since i rooted about 4 months ago without any problems, always did the wipes in recovery before flashing so really dont know what has happened here ?

Try formatting SD card, if that doesn't work, reflash recovery
Sent from my Vanilla Tazz using XDA App

Hi mate.
Forgot to mention i did format sd card on pc "fat32" using a sd card reader but that aint solved it
Not re flashed recovery though....
Edit: how can i re flash recovery if my lappy wont recongnise phone
knipp21 said:
Try formatting SD card, if that doesn't work, reflash recovery
Sent from my Vanilla Tazz using XDA App
Click to expand...
Click to collapse

chrisvr4 said:
Hi mate.
Forgot to mention i did format sd card on pc "fat32" using a sd card reader but that aint solved it
Not re flashed recovery though....
Edit: how can i re flash recovery if my lappy wont recongnise phone
Click to expand...
Click to collapse
Looks like you have been usb bricked, look this forum for usb brick fix, its not the fault of the rom, it just sometimes happens. Got it once too, easely to fix.
Sent from my HTC Desire

Im not blaming the rom not one bit as its been running fine this morning up untill i did the backup.
I have read and read that much my heads spinning %-( there's hek of a lot to take in and being a rather noooooob im lost as to what i should do

Worstenbrood is right, that's.just a USB brick, don't worry, it's an easy fix. Search Modaco for USB rickrolled.
http://android.modaco.com/content/h...com/309939/usb-brick-rickrolled-b0rked-fixed/
You can skip step one.

Not to worry ? im bricking it lmao
I really aint got a clue about the fastboot thingy if you have a little time could you give me a step by step of how its done
cheers

Download the SDK and then use the command prompt to run the fastboot command from the Modaco tutorial.
There are quite a few guides for fastboot, just Google it

Hi
I just ran the command and when entered it said fastboot not found?

You need to run it from the directory containing fastboot.executive (in the SDK).

thanks for the replies
i have tried that but im getting 'adbwinapi.dll is missing from your computer'
i have re-installed sdk and still wont work?

Did you do this
Windows XP / Vista
Right click on the My Computer icon and select the properties tab.
Select the Advanced tab and click the Environment Variables button.
In the new dialog box dowble-click on Path (located under System Variables) and type in the full path location to the tools directory.
Has to be done for it to work
If you have never used sdk before Google for a good install & how to use guide

whooohoooo right solved the sd problem, new rom flashed and powered up Many Thanks guys "but" i still cant use the usb on laptop ?
When i plug usb in it the phone only charges ? and an usb not recognised message ?

did u install the htc drivers from the htc website? i was having problems with connecting my phone dowloaded those and un-installed sync and all was fixed!

i get 'usb not recognised message' every now and then on my home pc and the works pc both running Windows 7 64bit.
I found that usually when it pops up about
'usb not recognised message'
i just unplug the cable then back in a few seconds after the message then it usually connects ok. sometimes it takes a few attempts.
thats with 'HTC Wildfire_setup_3.0.5481' installed for the 64bit drivers.

Thanks very much guys for all your help managed to get the usb fixed by installing htc sync
But now i have another problem i noticed today is Bluetooth wont turn on ? is there a fix out there for this ?
cheers

Im experiencing strange reboots now with phone plugged into laptop via usb, and on the status bar on phone it show usb debugging and then dissapears and comes back and when i unplug usb the phone reboots?
I wiped the laptop yesterday and phone seemed fine and now the troubles have come back
In logcat error im also getting this message when i enable bluetooth
attempting to remove unknown iface (usb0), ignoring
bt_enable: Timeout waiting for HCI device to come up
Seems as if the brick has actually fooked my phone up good and proper !

Do I have a bricked usb card?...HELP!!!!!

Hi all...bare with me here, I posted this earlier, but in the wrong forum section so I am going to start over here.....thanks for your patience....
Hi everyone...I have a problem..I tried to use the Firerat zips to increase my internal storage, and during the flash of the zip file the phone hung and I had to pull the battery out.....since then the usb wont mount.
I am using a Tmobile mytouch slide 3g.
I tried using the sdk and running the fastboot commands etc to get the sd card to mount...no go.
I have tried the fastboot oem enableqxdm 0 command and no go....
Note:..My sd card works fine in a card reader on my computer, I can drag and drop anything to it etc. etc.
Finally i downloaded the stock rom, and i was able to put it on the card, and rename it ESPRIMG.zip and installed it through recovery...My phone was rooted and S-off running ginger, but now back to stock...S-on, and hating the phone now...lol.....
I have been all over the web and I am so confused...everywhere you search there is something different, I just dont know what to do, Windows doesnt recognize the phone when plugged in so I cant load custom rom etc back on....AARGH!!!..I am so frustrated, and have a migraine messing with this damn thing.....lol...
Someone here suggested the MISC is bad and that a binary flash_img would fix it, but honestly, I have no idea what any of that means...all that means to me is confusion, and I have that already.....lol
Can someone please suggest what I may try doing?I am pretty savvy with computers but some of the adb/shell stuff is very confusing to me, I dont like cmd prompts...so maybe a detailed explanation?..
Thank you so much for taking your time to read my problem, I really appreciate it very much.....Dirtylarry
"Kharma...It's a good thing"

ok man im gonna try to understand the problem... you say your usb mount doesnt work but the sdcard works with the adapter, then you went back to stock and un-rooted and the pc doesnt recognize your phone? right?
So it looks to me (just an idea) that the problem is your cable or the port on your pc... just beacuse your sdcard IS working in your phone as well since you used the ESPRIMG.zip(wich was really unnecessary) and you flashed it using the sdcard obviously.
Now you need to find a way to root it again just like you did the first time... dont mess with the drivers since you havent changed them in your pc (i guess) and try this guide....
http://richard.gluga.com/2010/08/complete-guide-to-rooting-and-hacking.html
Now all i can say is ALWAYS DO A NANDROID BACKUP BEFORE MESSING WITH YOUR PHONE. And check the cable/ports... thats the only problem i can think of...

well the fact that I have 3 computers that all used to recoginize the phone just fine is what's weird....none of them do, nor does my usb connection on my car stereo...the computers all say "USb not recognized" etc. etc. and the car stereo says USB N/A .......So i'm just at a loss as to what is going on here....Any ideas????? Thanks much ....Dirtylarry

Try installing PDA Net. It installs USB Drivers and resets the registry. One day it would work, then the next day it didn't work, reinstalling PDA Net worked every time.

Thanks Wave_Sailor, I tried the pda net install but it wont work....Everytime I try it says that it can't handshake to the phone, and then gives me an error code 103, I have tried many many times....also, in the device manager for computer it shows a yellow Exclamation mark everytime I plug the phone in listed at "Other Devices", and says Qualcomm CDMA Technologies MSM....So I googled, and found another thread saying Install Windows mobile 6 center, so I did, and nothing changed.......ARGH....DIrtylarry

Do part III, but while the phone is unplugged, download and install HTC Sync, and then plug the phone back in.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk

Ok...I did EXACTLY what you have suggested, and in the driver information box this is what I got after the install....
USB Composite device installed successfully
USB Mass Storage Device Failed
Mytouch slide tmobil installed successful
Still a no go on the Mass storage device......hmmm.....so weird of a problem to have....I would have thought that clearing everything on the phone and going back to stock would have done the trick......any more ideas?...Thanks so much for your help.....Dirty

Have you checked in device manager on your computer to see if the mass storage device has a yellow triangle? I just went through the same thing but in reverse. My pc would see the sd card while in my phone but not through the reader. I still haven't gotten it straightened out either, just learned to live with it.

dirtylarry10 said:
Ok...I did EXACTLY what you have suggested, and in the driver information box this is what I got after the install....
USB Composite device installed successfully
USB Mass Storage Device Failed
Mytouch slide tmobil installed successful
Still a no go on the Mass storage device......hmmm.....so weird of a problem to have....I would have thought that clearing everything on the phone and going back to stock would have done the trick......any more ideas?...Thanks so much for your help.....Dirty
Click to expand...
Click to collapse
Make sure you don't have any drivers disabled. Ran into that problem with a different phone. I had one driver disabled so it wouldn't install some of the other drivers.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk

Ok...just checked,...no drivers disabled in device manager...has to be something wrong with phone...its a/most like the driver is missing from within the phone or something...isn't there some way to get this back to where I could root it and install a custom rom again without the USB to phone connectivity and use my card reader to get some sort of files back onto phone that way?

ok....well I re-did the whole flash process over, and I am now rooted again once more.....I dont know how or why or what...but I am now going strong again.....lol thanks for the help everyone,

[Q] ROM Manager installed CDMA ROM over GSM phone, please help!

Hi there, as stated in the title I had a CM7.0.3, then ran ROM Manager (I've got Pro version) and tried the option "Search updates for installed ROM". It found and downloaded and update, that was CM7.1.0 buuuuut TOO BAD it downloaded and installed the CDMA version!
When I rebooted the phone, I could enter the system but it couldn't see neighter my SIM card nor my SD card. I can enter in bootloader or recovery mode, and tried to install another ROM without using an SD card (http://www.addictivetips.com/mobile/how-to-install-a-rom-to-an-android-phone-device-without-sd-card/) but the problem is that when I connect the phone to my PC, Windows XP says it needs Qualcomm CDMA MSM driver that, googling, I found ONLY for Windows CE based phones (it seems included in Active Sync ...).
I searched here in the forum, too, but fond solution only for Windows CE based phones ...
Could you please help me? Thank you so much.

have you tried to restore your nandroid backup?

It was the first thing I tried but ... as I wrote I realized that the phone couldn't see my SD card ... If only I could access the SD card I could install a new ROM since I've Amon-RA correctly working.

I dont know if this will help ... but you can try do 'fastboot oem enableqxdm 0' in fastboot mode.

evilpraeotor said:
I dont know if this will help ... but you can try do 'fastboot oem enableqxdm 0' in fastboot mode.
Click to expand...
Click to collapse
Well, this could help, but if I connect the phone to Windows XP, it says that "Qualcomm CDMA MSM driver" is missing and I can't do any adb o fastboot instruction ... I can't communicate to the phone through my PC ... at least if I can't find those drivers.

it says 'qualcomm' even in fastboot (back+power) mode ?

No it says "Android 1.0" whatever it means...

Yes that's what it's supposed to do. Then while in fastboot run the command mentioned earlier.
But first boot into recovery and see if you have access from the sd-card(you should have) from there. if so, just use the recovery to transfer a new rom to your phone and then flash it.

So, good news. First of all thank you for your suggestions.
I connected the phone to a Windows PC and even in fastboot mode it can't see the HTC. Buuuuut I connected the phone to my Mac using ADB for Mac and I could access it in fastboot mode! So, I ran the command you wrote, then entered recovery mode and I could see my SD card, so I could install CM7.0.3 and now I can access SD card e use SIM card. So good!!
There's still only one issue: Bluetooth doesn't work! I try to activate it, it says "activating" but after few seconds it fails. I tried to reinstall the latest radio e then again CM7.0.3 wiping, first, alla data. But it still doesn't work. There's a reason for that? But above all, there's a solution?
I'm reading http://forum.xda-developers.com/showthread.php?t=691639 right now, hope that works.

Well.. You should try another ROM.. just try any small ROM i.e. devnull.. and check your blutooth.. as it seems your mobile is connecting to pc.. so USB and SD both working.. no need to USB fix.

So, I used the instructions in the link posted before and do an USB fix and now BT is working. I can't test, right now, GPS and USB. To be true, I didn't test USB connection so I am not sure that a USB fix was not needed.
What is strange, is that, fixed BT (and other) issues, I tried to reinstall a new fresh ROM (the CM7.0.3 I had before) and ... the "no SD and no SIM" issue was there again! I had to do the entire process again and then again BT didn't work. I fixed this one too, and now my phone "seems" ok ... I let you know in the next few days hoping now is really all fully working.
Thank you all.
UPDATE: tested GPS and radio, fully working now

USB Brick

Hello!
Here is my problem. Weeks ago i rooted my phone using unrevoked and I'm also S-off. But yesterday i wanted to flash a new rom, so I wiped and after that took conscious that I was unable to flash a new rom because it was impossible to access my SD-card. I tried to reactivate the my SD-card using differents methods but it didn't work.
So now I totally desesperated, if anyone has any idea of how i could fix it he would become my hero!
PS : sorry for my English.

Try to format your SD card using your computer. Use FAT32. Copy a new ROM file to said card then flash via recovery. If that doesn't work, try using a different SD card, maybe this one is broken (yes, it can happen all of a sudden).
To check if your USB is bricked, try connecting your device when in HBOOT mode (bootloader) to a PC via USB. If the PC can detect the phone, then it's not an USB brick. The phone's screen should also read "HBOOT USB". You can also try fastboot, in which case the display will read "fastboot USB".
If that doesn't solve your problem, please give us more details.
P.S. - You shouldn't have opened a new thread, as there are already lots of threads on this matter.