Hello All,
My HTC Diamond Handset serial no is HT826K******* Tryed to change the ROM , but after reaching to 100% also the completed mesage is not coming . When I press the reset button Tri colour screen appears with error messgae " Upgrade ROM code error Please try Again".. . Please help
You probably don`t have the correct update package for your device... If you really want to update to this rom then you need the HardSPL. Install the HardSPL 1.93 Unsigned Developer edition.
do you have Hard-SPL?
I Recently updated through ROMUpdateUtility know i see touch diamond screen with RUU_Signed_1_93OliNex_HSPL_UnsignedEdition ...Please help
just flash another ROM while in bootloader and connected to usb. I would suggest to use a simply rom.
Hi,
But How , I am not able to copy the file to Internal memory as when I connect to laptop the the internal memory is not visible:
you don't need to put the nbh file in internal storage. Turn your device off. Press and hold the volume down button. While doing so press the power button. Keep holding the volume down button pressed until you see the multi colored screen which is called the bootloader. At the bottom it should say Serial. Using the USB cable with which you sync to your PC, plug the cable in to your PC and then plug the other end into your device.
The multi colored screen should soon say USB at the bottom of the screen. You are now ready to flash a new ROM. Just run the RUU as you would normally.
I did that; know I got the tri colour scree ;which says USB in white area know how to run RUU , my htc is connected to my laptop
create a folder on your pc and name it anything. now copy the nbh ans ruu.exe in that folder. run the ruu by double clicking it. this should be done when you get usb on your screen, if done correctly you rom flash should start flashing and a bar will appear on your phone.
Thanks All
Hi All,
Problem got fixed .
Solution used:-
Unsigned-Hard-SPL-Diamond-OliNex(2)
rumbles said:
you don't need to put the nbh file in internal storage. Turn your device off. Press and hold the volume down button. While doing so press the power button. Keep holding the volume down button pressed until you see the multi colored screen which is called the bootloader. At the bottom it should say Serial. Using the USB cable with which you sync to your PC, plug the cable in to your PC and then plug the other end into your device.
The multi colored screen should soon say USB at the bottom of the screen. You are now ready to flash a new ROM. Just run the RUU as you would normally.
Click to expand...
Click to collapse
so wut happens if i get no usb then wuts the matter ???
need to know what problem i have becuase i can never connect the fone via usb
Dynomite232 said:
so wut happens if i get no usb then wuts the matter ???
need to know what problem i have becuase i can never connect the fone via usb
Click to expand...
Click to collapse
Do you have the correct drivers installed?
Or Windows Mobile Device Center?
I think you need that I'm not too sure, I do anyway
Related
I want to upgrade rom on may diamond but when conect the phone to my conputer the phone it just starts to charge. The computer does not detect him and I have activated usb conection on the phone.
I am using a standard miniusb cable used also for canon fotcamera, Nokia N95, motorola V3 (v360 L6, L7 etc.)
I did instaled Activesync on my computer but still no result.
You did no say which Win OS you are using - If Vista then you do not need activesync (AS) but windows mobile device centre or any other Win OS Before Vista then AS is what you need. AS needs to be installed before you connect your phone to the PC.
Have you restarted your PC first before install - this also helps sometimes
Try this....
Start>Settings>Connections>USB to PC and here ....uncheck the box Enable advanced network functionality
Just a reminder to please use the Internal Method when flashing a new Rom or Radio. Do not rely on your PC as errors occur more frequently.
R3PUBL1K said:
You did no say which Win OS you are using - If Vista then you do not need activesync (AS) but windows mobile device centre or any other Win OS Before Vista then AS is what you need. AS needs to be installed before you connect your phone to the PC.
Have you restarted your PC first before install - this also helps sometimes
Click to expand...
Click to collapse
I am using Win XP SP2 and I have tried every thing that you said but nothing.
band27 said:
Try this....
Start>Settings>Connections>USB to PC and here ....uncheck the box Enable advanced network functionality
Just a reminder to please use the Internal Method when flashing a new Rom or Radio. Do not rely on your PC as errors occur more frequently.
Click to expand...
Click to collapse
I did uncheck that box but without any results so now I will try internal method. But I'll have to send the file to the phone via bluetooth and see if it works.
band27 said:
Just a reminder to please use the Internal Method when flashing a new Rom or Radio. Do not rely on your PC as errors occur more frequently.
Click to expand...
Click to collapse
How much is it supose to take "Internal method"?
After pressing Vol_Down + Back button it showed the three color screen then it changed to a white screen with loading on it and it stays like that (after pressing Vol_Down + Back button I didn't press nothing else).
The Internal Method shouldn't take you any longer then 2 min. or so.
Once you have started the flashing to begin in the Grey menu....it will eventually say OK...OK
and yes
at this stage you soft reset and press vol down and centre round button.
Grey menu then gives you a choice to reset back to manufactures settings which is what you want (vol UP)......this should take an additions 2 min. if that.
band27 said:
The Internal Method shouldn't take you any longer then 2 min. or so.
Once you have started the flashing to begin in the Grey menu....it will eventually say OK...OK
and yes
at this stage you soft reset and press vol down and centre round button.
Grey menu then gives you a choice to reset back to manufactures settings which is what you want (vol UP)......this should take an additions 2 min. if that.
Click to expand...
Click to collapse
I have tried everything that you said and nothing.
The only diference is that now when I conect the cable to the phone it asks me witch mode to conect it (Activesync or storage), but the computer still doesn't see's it.
Tried another USB-cable?
chribruu said:
Tried another USB-cable?
Click to expand...
Click to collapse
I tried with 3 diferent cables.
Have you tried putting your device into bootload mode (soft reset & vol. down) and the connecting to your pc. The bottom of your coloured screen should switch from serial to usb....If this switches to USB then you are good to go with downloading what ever Rom using the RUU_
Keep me posted...
band27 said:
Have you tried putting your device into bootload mode (soft reset & vol. down) and the connecting to your pc. The bottom of your coloured screen should switch from serial to usb....If this switches to USB then you are good to go with downloading what ever Rom using the RUU_
Keep me posted...
Click to expand...
Click to collapse
It doesn't switch's to usb it only shows "serial". If I put it into bootmode while it is conected to USB it shows nothing, not "USB" or "Serial" it's blank.
I am begining to belive that there is a hardware problem in my phone.
Do you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/d...DisplayLang=en
I have flashed many Custome ROM's before. I have HardSPL installed on my phone.
I tried flashing to a ROM (I forget which one now, I think Cloudfa or something) and it stopped at about 15%. The Update utility stopped as well.
I cannot connect to bootloader at all. I tried holding down on Volume down/Reset to enter bootloader, but the thing is that it's already in bootloader with the message "Upgrade ROM code error, Please try again"
ActiveSync doesn't see my phone either. In fact all it does is just sit on the bootloader screen with that error...
Please Help... Thanks You...
A normal soft reset still brings you back to Bootloader?
What happens when you plug in your device? Does it not change from serial to USB at the bottom?
band27 said:
A normal soft reset still brings you back to Bootloader?
What happens when you plug in your device? Does it not change from serial to USB at the bottom?
Click to expand...
Click to collapse
Sorry. Yes it does show USB when plugged in, but won't respond to anything that I have tried software wise. It does not switch from this bootloader/error screen at any point. Even after I pull my battery and turn it back on...
I have yet to come across a thread which has this exact problem...
jzalapski said:
Sorry. Yes it does show USB when plugged in, but won't respond to anything that I have tried software wise. It does not switch from this bootloader/error screen at any point. Even after I pull my battery and turn it back on...
I have yet to come across a thread which has this exact problem...
Click to expand...
Click to collapse
Have you tried flashing a different ROM while in bootloader?
^^ Yes. It give me an error on my computer...
I would like to try the internal flashing method but I don't seem to have a way of getting at my Storage Card.
I found this thread with a similar problem
http://forum.xda-developers.com/showthread.php?t=480022
I WAS just able to get off of that screen I was talking about, but the best I get is to the Touch Diamond Screen that lists my ROM and such. So no real progress.
I have a feeling that I would resolve my problem if I could Flash from the Interanl Storage...
Have you tried hard resetting the device?
Pull out stylus and Holding....1) Vol. Down 2) Center Round button 3) then press red button aka soft reset with stylus
Nothing...
im stuck
hi all i am very new to this im not sure what i have done or how to fix the problem i download these this morning and they worked
rom version 1.57.831.1(47324)wwe
radio version 1.14.25.24
protocol version 52.64.25.34u
when i bootload in tri colours screen it shows
BLAC100 32M
SPL-1.56.OliNex
MicroP-Blackstone (led)v6
if it shows that i must of done something right i think of what ill read
and i have windows 7 ulitmate and i have Miri_WM65_21815_V19.0_Premium
when i double click on the BLACKSTONE RUU WRAPPER it crashes then i rename a new folder and done it from there and it works but it comes up wit error 208 file open? then i got told to rename to ruu_signed.nbh file to blacimg.nbh and to store it in the root of my sd card done that then somehow i got it to come up to the screen by Turn off the phone, press and keep pressed volume down button and while keeping it pressed turn on the phone then i see a message "Press power to flash your device" and i press power to flash got to 0% and it crashed and come up with Upgrade ROM code error plz try again and stuck in bootloader mode but now it wont even turn on its dead it wont turn on no matter what i do can someone plz help
all i want to do is get windows mobile 6.5 working i cant understand that it can be so hard to do
thanxs blueboys25!
Hi all u guys out there hope someone can help me i installed this rom on my diamond the name was TEAL or some like that the first few times it was fine but then my battery was running low and then when i turned my diamond on again i had 2 setup mobile and now it just keep showing the screen that says it wanna setup and i cant acess USB from there so plz if u can help me recover my diamond plz reply
try update from Boot Screen
Blackster..try updatin frm boot screen..go in boot screen & then connect it to usb & try updatin the ROM...
to get in your bootscreen just reset your device while holding the volume down button
just so you know ^^
Tried every thing
,My vista wont show the usb from hardSPL and i cant connect from the setup and when i just installed the rom again it wont work
nothings work plz help
USB??
its just installing the usb driver but show no usb
simple thing
just run RUU from u'r PC...
Follow 1st Two steps by clicking next...
no need to perform mentioned task in RUU.
Connect USB Cable PC to Diamond...
On diamond hold on off button and volume down button and hit reset button on back..
you will forwarded to boot screen on diamond...
It will automaticly identify u'r USB connection to PC...
Once it displays USB on diamond boot menu, Hit Update button on RUU running on PC...
Then follow the RUU instructions...
Once finished, you have done...
I flashed my Diamond to many firmwares before but today after flashing it to Memo's WM 6.1 I cant seem to flash to anything else... I tried every single version of hard spl and its either connection error or nothing happens... i tried mitty but when i connect my phone to the USB, it still says serial not USB...
Im new to this, atm just generally confused... someone help?
It looks like you USB interface is broken or your cable is not OK.
Try some other cable if possible.
Otherwise, do you have a DIAMIMG.NBH file in the root of your storage? If yes, you can flash it directly from internal storage and then examine your USB.
iXiR said:
It looks like you USB interface is broken or your cable is not OK.
Click to expand...
Click to collapse
or maybe you just dont have drivers for usb bootloader installed ?
-
vicai said:
or maybe you just dont have drivers for usb bootloader installed ?
Click to expand...
Click to collapse
not sure what u mean... if i used the 2003 driver uploaded by the forum it doesn't show USB (just serial). but if i use the official version i get USB.
and just to confirm the flashing buttons are : hold down volume key, press back and reset?
-
ok sorry for the big fuzz, ignore my stupidity...
i was pressing the hang off button instead of the back key for the entire day XD
but still got a problem... the screen just says loading and i do have the DIAMIMG.NBH in my root...
megabeater said:
ok sorry for the big fuzz, ignore my stupidity...
i was pressing the hang off button instead of the back key for the entire day XD
but still got a problem... the screen just says loading and i do have the DIAMIMG.NBH in my root...
Click to expand...
Click to collapse
no need, pred vol down (no back key) when you get the usb in bootloader, start the cursomtruu.exe from the rom you have downloaded, next next next finish
hi everybody,
i use http://forum.xda-developers.com/showthread.php?t=1259821 to root my htc desire hd, everything goes fine, it started to downgrade, some bars wre on the phone the phone rebootor some like that,then i must choose in hboot fast boot and so one ,the problem is if i want to choose with volume keys it doesnt work its like frozen,if i shutdown the phone it freeze at htc logo and that its, with volume - and power key i can start hboot,but then the keys doesnt work and i cant select any item, power key also doest work..any how to fix it? when i boot normaly and it freeze wtih connected usb my pc see it in device manager as usb storage but not more.
ty for help now
I do not get all of what u are saying, but if you can't move in hboot your problem is probably a bad sdcard. Try using a different one..
Sent from my GT-N7000 using xda app-developers app
m4rta said:
hi everybody,
i use http://forum.xda-developers.com/showthread.php?t=1259821 to root my htc desire hd, everything goes fine, it started to downgrade, some bars wre on the phone the phone rebootor some like that,then i must choose in hboot fast boot and so one ,the problem is if i want to choose with volume keys it doesnt work its like frozen,if i shutdown the phone it freeze at htc logo and that its, with volume - and power key i can start hboot,but then the keys doesnt work and i cant select any item, power key also doest work..any how to fix it? when i boot normaly and it freeze wtih connected usb my pc see it in device manager as usb storage but not more.
ty for help now
Click to expand...
Click to collapse
I think you will have to start again all process. Check if you have all USB driver installed ( if not, download HTC Sync from HTC site, install, reboot your system, then remove HTC Sync from your PC. JUST HTC Sync, not other diver wich have been installed ). After that process can be started. Check USB debugging and see if "charge only" is selected ( uncheck "ask me every time" ).
When the process start, choose 1 and let it to work. It will do everything without your help . When phone goes to hboot menu, you will see "volume up to ..bla bla...and volume down to ..bla bla. Only then hit once volume up. Now everything it shold be fine.
Ok i will try to explain what happend.
1. I done everthing like in instructunions,
2.Downgrade started copy files and so one, then it started all stuff in the phone some bares apears,extract stuff.
3. I must choose items with voluem keys it doesnt work, so i picked the first with power key.,everything goes fine.
4.hboot starts voluem keys doesnt work,power key also.cant even shut down with power key.
5.if i restart phone normaly, its freeze at htc logo
6. i if start phone with volume - and power key ,hboot appears but voluem keys doesnt work.
7.i plug usb ,start the phone with hboot , pc doest react ,like its not pluged in.
8 i plug usb start normaly, i see just in hardware manager an usb mass storage device,thats it i do not see in "my computer"
ok without sd card i cant navigate in hboot)
in hardware manager apears like android 1.0
with ace doest work,he do nto found phone,
what should i do now? for me is enough if i can just use my phone again -_-
Please get your volume button checked to make sure it's not damaged.
m4rta said:
ok without sd card i cant navigate in hboot)
in hardware manager apears like android 1.0
with ace doest work,he do nto found phone,
what should i do now? for me is enough if i can just use my phone again -_-
Click to expand...
Click to collapse
Uninstall the drivers and install them again with the phone unplugged...check what happens then. Have u installed anything else apart from running the Hack Kit?