File size problem - Touch Pro2, Tilt 2 Windows Mobile General

I have a frustrating problem that so far I've been unable to solve and hope one of the experts might be able to point me in the right direction please. It might be a TP2 or WM file support issue or somehow related to using a 16 GB microSD card, or it might be due to some aspect of the application, Memory-Map.
I transfer maps (proprietary .QCT files) from my PC to my TP2 so that I can then use them on walks/trips. Up until now I've been using only small files, 20 MB or so. But recently I tried larger maps, 80 MB plus, and Mem-Map reported that it couldn't open them.
FWIW, it did rather better when I transferred the files externally to the 16 GB microSD card versus direct via AS. That managed 34 MB but failed to open the 80 MB. But with the AS method the best I tried was 12 MB.
I then dusted off the TP2's predecessor, my ancient iPAQ 2210. I copied a file of 120 MB to it externally and Mem-Map opened it with no fuss.
So can anyone suggest why the TP2 can't handle it please?
--
Terry, East Grinstead, UK

Take the SD card out, mount it on your desktop, then copy the files and put it back in your mobile.

Thanks, but the problem remains.
I've just had a reply from Memory-Map which I'll paste below:
"The issue we are having with Windows Mobile 6.1 is that it seems to refuse to open Memory-Map map files that are smaller than the limit set by the Memory-Map Pocket Navigator software. The Memory-Map Pocket Navigator software= has a file size limit of 400MB per map file, however we have found some Windows Mobile 6.1 devices will not open map files of sizes greater than 100MB. This unfortunately changes between devices and as such we are unable to supply an answer telling customers the maximum map size they are able to use on a particular Windows Mobile 6.1 device.
The reason for this issue is that Microsoft have changed something in the way that the Windows Mobile 6.1 operating system handles data and threads the available system resources (CPU, RAM, and ROM) to software applications. As I am sure you understand Microsoft are quite unwilling to change their operating system back to how it was in Windows Mobile 6.0 or Windows Mobile 5.0 (that Memory-Map Pocket Navigator software worked fine with), as such we are currently working on ways in which to be able to use larger map files on the Windows Mobile 6.1 devices. This however is not an easy task, as it involves changing the entire Memory-Map .QCT file structure and the entire way in which the Memory-Map .QCT files are handled by the Memory-Map Pocket Navigator software (.QCT is our propriety map file format)."
--
Terry, East Grinstead, UK

Related

Issues saving WM6 Excel files. Please help!

I know that this is arguably in the wrong forum, but I've been posting my issue in the "General" forum for weeks without one response. Trying to get some exposure.
I'm just wondering if this is just my issue or if it's a common issue with WM5/WM6 and or the latest ActiveSync, 4.5. I'm having issues with syncing Excel files that used to sync just fine on WM2003. I have large spreadsheets that are about 325kb in size on the desktop. When I sync the file, it's the same size until I open it and try to make changes and save it. Then I get the following error:
"Unsupported content and formatting may be lost if you save this workbook..."
The only way I can save the spreadsheet is to rename it and create a new one with the same name. It then writes over the original file, taking up to 30 seconds to save. The file is then 969kbs in size (almost triple!). And every time I edit on the PC it goes back to 325kbs. Then when I edit on the PPC, it goes through this again, making the file almost a Meg again.
Is there any way to just sync the file with just one format? WM2003 doesn't have this problem at all. It syncs the file and it's still the same size on both the desktop and the PC, 325kbs. But not for WM5 or WM6. This is really annoying. Also, sometimes my date formats are changed from month-day-year to day-year-month, or something retarded like that. Really freakin annoying to say the least. You buy MS products and they're not even compatible. I feel like I have a Palm trying to sync Apple documents or something. It's really ridiculous! I'm hoping that one of you genius' can point me to a setting that I've overlooked to fix this. Or some kind of cab or hack to make Excel save documents in the same format as WM2003. Please help!
PS, I've tried to change the conversion settings in Active sync as well with no apparant effects.
As cuurent ppc office uses same format as pc why not copy and paste documents rather than synching - its what i do with any documents i want to have on my ppc.
meschle said:
As cuurent ppc office uses same format as pc why not copy and paste documents rather than synching - its what i do with any documents i want to have on my ppc.
Click to expand...
Click to collapse
I get the same error whether I use activesync or not. That's the problem - they're not the same format. When saving on the desktop it converts to XLS work book. When saving on the device it converts to a PXL file. Thery're different. As a matter of fact, I found out last night the WM2003 is converting the files the same way but it shows the storage size as if it were in the XLS form (says 352Kbs but desktop shows 950Kbs actual size until opened and saved on desktop) It's been doing this all along, so I guess the only difference is that now, I'm getting an warning before I save and rewrite the file and I have to rename it.
Strange thing is that no one seems to have this issue but me. I've only found like 2 or 3 posts on the internet with people having this issue with WM6. So, there's a way to bypass it - Just don't know how.
BTW, Thanx for replying to my post.
2003 saved as pxl - wm6 saves as xls or xlsx - what rom are you using?
meschle said:
2003 saved as pxl - wm6 saves as xls or xlsx - what rom are you using?
Click to expand...
Click to collapse
Yours. O2 Premium (not Premium Plus)
Well it saves as xls\xlsx then - theres no need for conversion of the files.
meschle said:
Well it saves as xls\xlsx then - theres no need for conversion of the files.
Click to expand...
Click to collapse
I tried to edit-save using WM5 storeage on the device and then edit-save on the desk top. Created the document on the device and it was saved as "Excel 2007 Workbook"(default). Save to storage card and then turned on WM5 storage and connected to the desktop. Went to the storage card, opened the same file and I got a brief message "file conversion in progress" before the file opened. I went to "save as" and the file type was the same "Excel 2007 Workbook". So, like you said, why is there a need for conversion if they're in the same format? Says there're the same but I don't think they really are. Desktop file size is always smaller than the device file size.
Appreciate your help, but I guess I'm just going to have to live with it.
PS and yes, it still asks me to rename the file if I try to edit it after coming from the desktop.

A bunch of questions...

Hi,
I've been using my Artemis for 2-3 weeks now and i absolutely love it, even more so after installing Meschle's Rom (thanks for that one).
I'm always discovering new things to do with my artemis and unfortunately in doing so i also discover things i can't figure out for myself. So i hope some of the forum veterans can provide me with an answer to any of the following questions:
1. I installed PocketGba and it runs very well for the most part. But when trying to run games like Fire Emblem GBA it says 'insufficient memory'. I've been reading through a lot of pages concerning this and discovered it has to do with memory allocation. The question is: how can i safely relocate memory to play these bigger kind of games?
2. I set up my Outlook work account on my Artemis and i was wondering how i could change the setting as to receive the mail on my storage card.
3. Which of these applications is better than the built-in calendar: Agenda Fusion, SPB Diary or SBSH? I would just like a better organizer for appointments and such. If i install one of these, will there be any conflict problems with the present organizer? Can i transfer existing appointments to the new organizer?
4. How can I change my contacts as to display only contacts stored on the phone (no longer double displaying with sim contacts)?
5. How can i add and save words to the XT9 dictionary? Adding isn't the problem here, but keeping them for future use is.
6. In trying to re-install TomTom Navigator 6 some strange things have happened. As it turns out, TomTom didn't install correctly and is spread among a couple of folders. Can someone tell me if it's save to delete these folders and try installing Navigator again?
Showing under My Device: Program Files > Navigator: contacts, itn, logging, voices, navigator, ttnavigator.
Showing under Storage Card: My Documents > TomTom : empty folder
Showing under Storage Card: ttnavigator.
Can i safely remove all these files manually? If i want to re-install TT6...can i just put it on my storage card and run the program from my storage card?
Also, how do i create shortcuts on my device to programs stored on my storage card?
7. I'm using the installed Java Midlet manager Jbed and have thus far installed Opera Mini on it. I'm also trying to download games to my phone. For example: Harry Potter and the Order of the Phoenix. I tried everything but i just can't seem to download the game to my Artemis. Nor from the eamobile site, nor through vodafone live portal. Any help here would be greatly appreciated (also indicating which phone version of these kind of games is best suited to the Artemis, for example Nokia N series).
That's about it for now ))))
Thanks!!
Excellent questions. I thought I'd be able to help, but I'm kinda stumped on most of them. I'm also using a ROM from Meschle, and I'm using Agenda fusion for the home page. It's free, simple, and very customizable. Don't know about the others.
I haven't used the GBA emulator yet, but I am using a full Nintendo emulator and games run fine on my device. I'm thinking your memory issue is a problem with the settings or you my just have to find another emulator.
And with TomTom, I've never had a problem installing that program. How are you installing it? Cab file? I have a cab file I can email you if your interested. I just bought the software and copied the cab file from the CD. Works everytime.
re tom tom cab file
Hi I have the tom tom cab file, but only have the map for part of ni can anyone mail me the map for the uk?
Cheers all
merry xmas
Heres answer to your question 2 and 4.
UnShow Contacts from Sim
HKCU\ControlPanel\Phone\ShowSim
Normally the value is 1! Set this to 0 and soft reset!
-------
Change the location of email and attachments
HKCU\Software\Microsoft\MAPI\PropertyPath =
"\Storage Card\Mail" (REG_SZ string, no quotes)
HKCU\Software\Microsoft\MAPI\AttachPath =
"\Storage Card\Mail\Attachments" (REG_SZ string, no quotes)
To return to the original location:
Just simply delete these Registry settings (since neither is included by default).
----------
Change the location of Temporary Internet Files
When browsing the web, pages and images are saved in the 'Temporary Internet Files' location. You can change this location to, for example, your Storage Card:
HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders\Cache = "\Storage Card\cacheie" (REG_SZ string, no quotes)
Thanks nm8.
I am using the Touch lite rom from Meschle. And I don't think it comes with a registry editor. Is it worth getting Resco or is there a better, free alternative? I was looking at Schap's advanced config tool. But i'm guessing it doesn't allow registry changing. It does seem to allow to disable displaying sim contacts. Don't know if it also allows for changing the storage of e-mail and attachments to storage card.
All in all i think it's probably safer for a newbie to get the advanced config tool instead of trying to change registry settings, right?
The only thing i find strange is that Meschle indicates that the total free program memory should be 25MB. I have only installed a couple of extra programs (on storage card) and my device says it only has 16.9 MB free.
After disabling Cube and soft resetting device I gained 22MB free program memory. I can now load and run Fire Emblem on PocketGba. Unfortunately the device freezes when a battle is about to take place. Seems like the Artemis isn't really equipped to play these kinds of games. Same thing happens when changing video display and such. Shame. If anyone knows of a solution...
Disabled the cube, soft resetted my device and gained 22 MB free program memory. Now the PocketGba runs Fire Emblem untill a battle starts and then it just freezes my device. Strange. This game only needs 16MB free program memory. I have been playing with video settings and such and it still freezes. Seems like the Artemis isn't really equipped to run this...
@shawndh:
I've read everywhere that PocketGba is the best GBA emulator out there. It can theoretically load 32MB cartridge files according to memory state. As i stated above, I only have around 16.9 MB free. So it really is a question of memory allocation. Which emulator are you using and does it allow you to play any GBA cartridge?
About TT6. Thanks for offering the cab. But i would like to know first if it is safe to delete the files i mentioned in my topic start post.
Anyway thanks everyone for the input. Keep it coming this way )
Registry editor is available on this ROM, its part of the TaskManager
Start->Program->Accessories->TaskManager
Go to Menu->Create RegEdit Shortcut.
Regedit is then available from the Drop Down arrow in top right hand corner.
Bejito007 said:
Hi,
3. Which of these applications is better than the built-in calendar: Agenda Fusion, SPB Diary or SBSH? I would just like a better organizer for appointments and such. If i install one of these, will there be any conflict problems with the present organizer? Can i transfer existing appointments to the new organizer?
Thanks!!
Click to expand...
Click to collapse
Pocket Informant is excellent replacement for outlook although its not free, not tried the ones you mentioned. I believe most of the replacements use the same database to store the appt/task/etc and therefore all you appointments will automatically be available.
Thanks premkang. Unfortunately the Task Manager on the lite version is 2.0 instead of 2.8. The 2.0 version doesn't allow to enter the registry.
About PocketGba: I disabled the cube, performed a soft reset et voila 22MB of free program memory. I can now run Fire Emblem, but whenever a battle is about to take place the Artemis freezes. I'm guessing the Artemis isn't really equiped to run these kinds of games smoothly (even after altering video settings). If someone else has it working, let me know.
hey mate, don't know if any of this'll help, but...
with regard to your gaming problem have you seen the change pool size thread? allows you to change the memory pool size so that you can allocate more memory for larger applications (but a less memory for fast system operation) and vice versa. i gather, running vanilla, you want the quick system so it might not be of any help;
http://forum.xda-developers.com/showthread.php?t=323885&highlight=change+page+pool
also your tt6 query, i don't like it being installed on the device without the option to install on the storage card. i cut all files on the device that you mentioned and placed them in prog files on the storage (same as they would be in prog files on device). i then copied the tomtom navigator.exe (the one with the red hands 2.4mb) and in windows folder paste shortcut in;
1.AppButtons - to allow button config for tt, if required.
2.StartMenu/Programs - so that it shows up in the programs menu.
this frees up 2.5mb on the device. i dont know about which files can be deleted though. all i have on my storage card are;
main storage card;
Western_Europe...map - (file)
Voices (file)
Zip (postcodes ((file))
ttnavigator.bif (331b)
Program Files/Navigator within this are
contacts (file)
itn (file)
logging (file)
voices (file)
ttnavigator.bif (331b)
CurrentMap.dat (45b)
navigator.cfg (252b)
TomTomNavigator.exe (2.4mb)
DATA.CHK (2.6mb)
had it running for a while and all is fine. sorry if this is f*$king long winded, i'm a bit pissed and a novice, so i don't know if it's any help at all!!
good luck mate
also with regard to your query for xt9 saving ive started a thread http://forum.xda-developers.com/showthread.php?p=1767135#post1767135, handy idea - like it

Live Messenger for Samsung Epix i907

I use unlocked version of epix i907 on tmobile.
The live messenger client on i907 won't work, and it seems that the messenger program is tied to at&t text messaging, so it won't work with wifi connection or data plan.
It would be great if somebody would help me with a working live messenger for epix i907.
I tried both 10.6.0034.2500 and 10.6.0034.0800 files from this forum, both doesn't start at all, with me installing it after hard reset.
Same thing here. Has anybody had any luck?
After playing around with this for a while it looks like "Windows Live 10.6.0034.0800 (Fixed).zip" CAB from the Windows Live Messenger thread does not include the 128 DPI resource DLLs needed for the 320x320 Epix.
Fortunately, the Treo Pro has the same 320x320 dimensions and the ROM image ships with WLM version 10.6.0034.0800 so the 128 DPI files were there.
To get this working I installed the CAB from "Windows Live 10.6.0034.0800 (Fixed).zip" and then manually copied the Treo Pro 128 DPI files to the Windows directory.
I did get a series of security messages for each DLL asking me if I trusted the DLLs.
Now I'm new to all this jigger-pokery (this is my first post) so there was probably something I could have done to build the DLLs into a new CAB, but once I accepted the dialogs for each file, things seemed to work fine.
Here are the 128 DPI resource DLLs:
View attachment WLM128DPIResources.zip
can you guys help me to get to the windows directory epix
your going to have to unhide the protected operating system files on the host computer to get to it, or use something such as total commander.

MS File Explorer soooo slow

I have a 16gb Sandisk card. Resco Explorer reads it in a snap. I have a lot of html reference docs on it, so there are upwards of 90K small, medium and large files on the card (in about 6.5gb of space). Anytime the stock MS file explorer is called into play it takes 1 - 2 minutes to open any directory on the card. I even tried installing the File Explorer extension cab but that made no difference. Anyone had a similar problem, or have a fix? I'd like to use PIE to serve as my default browser because it will open directories from an html link (using file explorer), whereas NetFront can't, but the slowness makes it an unacceptable option. I wish there was a way to have any of the browsers use Resco as the default file system explorer.
How about opening files in the ROM? Is it equally slow? If not, I suspect that has something to do with your SD card.
Here's the thing:
This 16Gb card is a Class 2. Doing the same basic things such as navigating the card in Explorer works fine on my iPaq 210. In fact it's downright zippy at it.
I copied the contents to a Class 4 8 Gb card and it is still just as slow on the TP2, zippy on the iPaq.
Upon starting up File Explorer (fexplore) it takes forever to read the card. After the first time it's tolerable to move around in the card but still somewhat slow. But once I close fexplore and reopen it the same slowness results in the initial read.
It's the same in IE when I use it to read a directory in my HTML menu. Because it utilizes fexplore for that function it takes forever.
Has anyone else seen this sort of slowness with MS Explorer (fexplore) on their phone?
I've tried HouMing's Explorer Extension and that doesn't help. I'm wondering if this could have something to do with a failed attempt on my part to install PIE Plus just after I flashed this ROM a couple of weeks ago. I uninstalled it, and there appear to be no traces of it in the registry, but this behavior by PIE and MS Explore is strange. I've been using PPCs and PDAs forever and I've never seen the likes of this sort of slowness to read a card. And Resco works with no problems or slowness.

DjVu reader for WM 6.5.x

Hi,
I'm looking for a DjVu reader running on the newest versions of WM (6.5.x).
I've found some pretty old projects:
pocketDjVu and DjVuCE
I'm going to try them tomorrow if they work.
But I would rather have a fingerfriendly DjVu reader that is made for WM 6.5 (or 6.1 at least, lol).
Any tips ?
They should support WVGA and 800x480 px.
Or perhaps there is a plugin for Adobe Reader?
Update:
I tried pocketDjVu and runs quite well on my 280xx build.
It works with WVGA and except for the option menu you can controll it with your fingers. Not perfect as it was made for WM5 but acceptable.
When zooming it makes a notification that there is not enough RAM for this size but it still works.
Please feel free to post other DjVu readers as there may be a better one .
Anyone else with experience to share in regards to WM 6.1 and application mentioned above or any other app suitable for opening DjVu files?
i tried one of the two programs mentioned above,but i couldnt get my phone to associate it with djvu files.
it would only say "this file is not associated with any...." etc..
+ when i tried to find it inside the program istself it didnt list any of the djvu files.
any tips?
any tips?
Click to expand...
Click to collapse
nope, but i can assure you, that this filetype is useless on PDA's.
Let me say this again:
i am fanatic of collecting methods for opening as many filetypes as possible on PDA and that one is not suitable for that kind of devices. Maybe it was matter of size of files i tested, i am not sure about it, page loading was puren nonsense.
Now, what to do?
..i am struggling too. ideal situation would be converting djvu to CBR/CBZ, but...jesus, this would be nightmare.
UPDATE:
any tips?
Click to expand...
Click to collapse
quick thought:
did you try to add gsgetfile/tgetfile to your system(file requester changer, A MUST, imo)?
if i am thinking right, maybe that problematic software is just using default WM requester and it is just NOT searching inside of card subfolders. i do not remember what the problem was with these programs - you may try copying test file into /my documents to check, if it became visible(i know, ridiculous advice, but..).
otherwise, use total commander(PPC) for force-assigning filetype to djvu software - it may not work sometimes(it depends, if software can properly use %s's).

Categories

Resources