Related
Hiya, I've been playing about with the extended rom and have the system in great shape, apart from some registry settings, such as the owner info and device name. It would be kinda handy to have these setup automatically but I am totally unable to do it... I'm presuming it's because there is something else that has to be done other than simply set the keys.
I'm using PHM reg ed to export keys as well as simply creating them manually and am using WinCE Cab Manager to make the cabs. I'm on the original O2 Exec rom (well, most of it )
When I run the cab (automatically from a hard reset or manually), I can see the values in the registry but they never appear on the today screen. I've tried a variety of power cycling, soft resetting etc but the today screen is never updated - it always says "Tap here to set owner info". If I do that, the registry keys are cleared out...
If anyone can shed some light on this I'd be grateful - for a small problem it's taking up a lot of time! :?
Cheers!
I've not gone down the .CAB route, but just import these and other settings from a .reg file and have never had this problem.
When I have to install from scratch, the first install is Resco's Explorer (which contains a Registry Editor), then execute the .reg file.
Almost sounds as if the registry changes are not being saved. Is it only these particular settings or are other changes not registered?
Well, I have created loads of CAB files in WinCE CAB Manager to set up my phone, tomtom, etc.
I Used the same method as you. The only difference being that I reset (automatically) after I install them. Could this be it?
Ahh, which WinCE CAB Manager version you running? You need the new beta 1.2 version to be able to create WM5 compatible CAB Files. Can this have something to do with it?
moghisi101 said:
... The only difference being that I reset (automatically) after I install them. Could this be it?
Click to expand...
Click to collapse
Probably the cause. I know I've read and experienced that I must allow the device to flush after changes before I reset it. I usually turn it off, then wait a minute or two before I soft-reset.
Ahh, which WinCE CAB Manager version you running? You need the new beta 1.2 version to be able to create WM5 compatible CAB Files. Can this have something to do with it?
Click to expand...
Click to collapse
As yet I'm not using CABs/Cab-Manager. Couldn't find one when I looked - except at ridiculous money, which I wasn't prepared to waste - so I'm just using the .reg-files manually
Guys, many thanks for the replies!
I'm using my 15 free goes (and hibernating ) on version 1.1 of WCM at the mo, it's too expensive to buy as I would only use it for this as far as I can see - I'll head off and look for the beta next.
I have tried power cycling, pausing while off and resetting as well as soft-resetting from software, but not doing it automatically 'cos I don't know how!
@moghisi101: Out of curiousity, how are you automatically performing a soft-reset and thanks for the heads-up about beta 1.2!
I have written an Autorun.exe file, much like the one in the extended rom. It does not however read a config.txt file. It runs the CAB files (with my apps and settings in) and then resets.
I don't remember where I put the code, so I can't compile one for you. It only needs a slight change from the Autorun sample Microsoft Supply.
At the moment I can set up pretty much everything on the phone. Button Lock, GPRS Settings (including GPRS Auto Attach, etc), Owner Info, Default Volume, Today Screen Plugins (order and enabled/disabled), Date/Time, Screen Config, Infrared off by default.....the list goes on. When I Hard Reboot, It skips the welcome screen (all the time settings etc) and I've got it to ask me which Operator Settings to Install (eg Vodafone, o2, Orange, Tmobile Splash Screens and GPRS connections).
It's much better than the default Qtek, i-mate, and (definately) o2 ROMs...
Just a thought!
Are you annotating your .reg files with semi-colon at the start of a line?
With the PC, I've always annotated my .reg import-files, so that I could remember why I'd done something later on, but found that *no* lines after those annotation would be imported on the Exec (Universal). Don't know if this is specifically a WM5 issue or not. If you put the annotations at the end of the .reg file, all the preceeding key/value content lines *are* imported.
@astage: Interesting about the annotations, that must have caused some pain before you figured it out! I don't have annotations in my reg files as I'm not really using reg files I'm building keys in WinCE Cab Manager by both importing reg exports and typing them in manually.
Unfortunately, the beta version is only available to registered users, so I'll have to abandon that one for now.
@moghisi101: It sounds like you're sorted! That's basically what I had in mind myself, except that I was thinking smaller
Thanks for the thought about compiling an exe, I was thinking I may have to ask a mate to make something like that so if you do find the code and feel like posting one, I'm sure the community would thank you!
I've been looking for something that would just install cabs etc then reboot but not found one yet on the web... I'm a UI designer and so am wary about going down the visual studio path for fear I may start to favour all-grey interfaces :twisted: .
Which autorun sample are you referring to though? I guess I may have to get my hands dirty after all!
No, I don't annotate them, so I haven't come accross this. But, if you save some Keys using a Reg Editor and then use Import in WinCE Cab Manager...ahhh, I think i may know the problem!
1. Don't put Comments in Reg Files
2. Don't use import in WinCE CAB Manager! If the reg key has data above a certain length it will split it to next line using a ";", but WinCE Cab Manager assumes this is the end of the data. So, your Owner Info could be being entered in incorrectly as a result. You have to copy-paste the reg key into a new dword, etc into WinCE Cab Manager. i.e. DONT IMPORT
I hope that vaguely made sense
Yup! Clear as a bell, thanks! I'll try that in a mo, just rebooting. Import is *sooo* tempting though, so simple... Curse my weakness for the easy path!
Hi. Here is Microsoft's Autorun Code (I have that)
You have to make slight changes to allow for reboot at end. It's fully annotated if you dont understand what it means. BTW, you dont need Visual Studio. Infact it's probably the worst root. Use Microsoft's eMbedded Visual C++ 4.0 to compile this for Windows CE, Mobile 2003SE, (or Mobile 5?). It's Microsoft but it's FREE!?
Sweet! Two terms you don't hear very often in the same context are Microsoft and free! Nice one, thanks! I'm downloading Microsoft's eMbedded Visual C++ 4.0 as I type.
You actually solved the problem already though, in a way, pointing out that WCM truncates "strings". I opened an exported key in Textpad and tidied it up (removing the end of line "\" and the "\n\t") then saved it and imported the file into WinCE Cab Manager, made my cab, installed it and soft rebooted from SPB PocketPlus without going back to the Today screen. It worked!
I'm a big fan of Textpad and will use that to make a macro to tidy up exported reg keys so I can import them easily (another triumph for the easy path!).
You, Sir, are a DUDE!
Edit: 16.4 kbps from MS... :roll: For anyone else who decides to go down this path, the killer bit is to make sure your key values don't get truncated! Open the .reg in a text editor and make sure any really long values, like binaries, are all on one nice long line! It doesn't seem to make any difference if you soft-reset from an app or use the stylus btw.
Shame the baby kept us up all last night! I've *got* to get some sleep or I'll end up doing god knows what to my device by accident!
Thanks for the help moghisi101!
Hehe, Gee Thanks. And btw, Textpad r0x!
If you want to do that autorun thing.....familiarize yourself with the whole 2577 method (search it and you'll understand). If you don't want crappy o2 Customisations, etc on your device then you are better off just editing the extended rom, edit the config.txt, add your configuration CABs, and then every time you hard reset all your customisations will appear! NO programming involved. If you then add "welcome.not" file to SD Card, the Welcome screen at hard reset wont appear (if you code this in your autorun file it will work on ALL devices, not just a few including HTC). BUT only do this if your CAB files contain stylus screen settings, and time settings. However, as this is not viable in all situations the 2577 method can be much better. Especially when selling a piece of software, etc (automatic installation and configuration), as I do.
I might email you, later on, a video of what happens when I hard reset my device to give you an idea of what you can do (at the least) and hopefully you can go on to improve on that.
Thought I will give you a kick start. Here are some Regedits I could make for you. Took me a short while, but there are loads more for inbuilt apps (e.g Messagig, etc) but I coudn't remember where the reg values where.
Please note, I couldn't find any of the WM5 ones...completely forgotten them. But these should give you and idea as to where they are. Also, look here in the Wiki
http://wiki.xda-developers.com/index.php?pagename=BA_Hacks_WM5
http://wiki.xda-developers.com/index.php?pagename=BA_Hacks
Some of the ones I have given are from here, but many more I found myself
Hope it helps you (become a millionaire - don't forget me )
You can see the solution here: http://forum.xda-developers.com/viewtopic.php?t=34525
Thanks to Bayondthetech for the CAB file.
Hehe. I feel like a n00b now (which I am really). I hadn't seen that. But I think mine does a couple of extra things that he didn't post....?
Bye
Wow! Holy Cr*p! Thanks for all those reg files! :bows:
I'd looked at BTT's post before and was hoping to use his cabs as a guide. Unfortunately, they aren't currently available (from what I've read, he generated so much traffic with his downloads that his host yanked his connection and he's in the process of moving sites).
Thanks to moghisi101 and a few other posters on this forum, I don't need them any more!
@moghisi101: I had already edited my extendedRom's config file to load and run cabs I store on the SD card (to keep the extRom below 10mb) and realised last night that that already does the auto reset for me, so life gets another bit easier These reg files rock though! Shame you're not running tomom5 yourself, I'll have to sort those out myself!
The next thing to try is to export the BT settings for my paired devices - I'm hoping it will be possible to restore those automatically too.
Attached is the TextPad macro (although it is too simple to call it that really!) that I'm using to tidy up the reg keys for import into WinCE Cab Manager, hope it helps someone!
Post that video!
Hey
Actually, I have TomTom 5....up until 5.10 I edited TomTom's Cab itself but I just haven't had a chance with 5.21 (need to use CabWiz now, not WinCE Cab Manager - no full WM5 support lol).
The TomTom 3 Today settings is same for TomTom 5 if you want to change order/hide/unhide. Most of the other settings are in a .cfg file on SD card for Home Address, etc. Only a couple other settings use Registry...
Anyway....glad to be of some service
moghisi101 said:
... (need to use CabWiz now, not WinCE Cab Manager - no full WM5 support lol). ...
Click to expand...
Click to collapse
Had a brief conversation this afternoon with a friend who uses Microsoft's CabWiz to produce .cab files for bespoke software.
He mentioned that (with CabWiz) if you use the .cab to apply registry entries, then the .cab must also install something, a text file or similar. I can't recall if he said it would otherwise not create the .cab correctly, or that the reg entries may not be applied correctly.
Not yet tried it myself - will have to wait until after the bloody Tax Return is finished!
Strange, It works fine for me? Was his the newer CabWiz that you can use with WM5, like mine?
Hi!
I have a Dell Axim x50v (VGA device) running WM5 AKU 2.3, and would really want to have HTML support for email, since WM5 email client doesn't support it. I don't want to download any extra third-party application like Flexmail, but rather would like to know if there is some kind of a plugin for this native email client that allows HTML support.... I heard of WM6 and it's richer email client. Is there any way you can install WM6 email client on a windows mobile 5 device like mine? If not, is there any WM6 ROM that will work on my PDA? (Other things like viewing Internet Explorer Mobile in high resolution mode, or the new "calendar ribbon" would also be a worthy upgrade.)
.... There is a very slight chance that Dell will release an official WM6 upgrade considering how old my model is.... (it came out in 2004, being replaced by x51 models in late 2005).
Any help will be greatly appreciated.
For what I have read, you are basically out of luck.
You can't rip the email client out of WM6 since it seems to be very much incorporated within the OS. If you want to enjoy the WM6 email client you have to upgrade.
As far as if there is a WM6 I am not sure and since you have reached a HTC forum, well, have you tried a Dell site?
agovinoveritas said:
You can't rip the email client out of WM6 since it seems to be very much incorporated within the OS. If you want to enjoy the WM6 email client you have to upgrade.
Click to expand...
Click to collapse
Quoted for the truth.
Outlook (PIM) depends on Shell, Shell depends on Coredll, Coredll depends on kernel. Bummer.
Like I said, there is no chance that Dell will be releasing WM6 upgrade for its handhelds, so visiting "aximsite" wasn't very usefull for me right now.
When you guys mentioned that the WM6 email client is very much incorporated with the OS, does the same apply with the Internet Explorer Mobile that now supports high resolution, or the Microsoft "MarketPlace"?
Is there at least a third-party HTML support plugin for the native email client, or is Flexmail the only solution for viewing HTML-formatted emails? (I would really prefer a "free" third-party application.)
Xdenwarrior said:
(I would really prefer a "free" third-party application.)
Click to expand...
Click to collapse
Try Qmail IMHO the best email program and what is more important free
http://q3.snak.org/download/ take most up to date compilation from Nightly build section and don't be afraid about japanese page Qmail is in english! At the bottom of download page you'll find openssl extension for secure connections.
I can't properly download this "Qmail" program. If I want to download and install it through activesync by first of all extracting the zip file from the nightly build and then running the exe file, it eventually says "not a valid Win32 application" or something like that. In fact, i can't stand that official japanese website, cause i get that same message for anything i try to download from there.
Actually, i got a chance to see how Qmail works (looks pretty nice - it supports HTML, right?), but not necessary to use it. Instead of running it on a PC, i copied right away that zip file to my device, and installed Total Commander on my PPC. However, I had to extract each component for Qmail separately using the Total Commander. Really a disasterous download, if not even. It ended up opening the program, but never really saving it anywhere on my device. After a quick soft reset, there is no more trace of it.
So, SERIOUSLY, does anyone have an alternate cab or exe file of the latest nightly build for Qmail v3 that actually works, not links to that japanese website?
I think you don't get the idea of inslalling it it's not self installing program! unpack it on your desktop than move whole folder with all files (all dlls and q3u.exe) to some folder on your ppc, probably the best is storage card. You can copy files that way by opening activesync and than klicking on explore button there will be your ppc just like any other folder in normal desktop pc. Copy whole qmail folder to it and thats it, you can start qmail using totalcommander on ppc or later create some shortcut to program on today or in programs.
here is packed folder "Qmail" with all needed files unpack it on your desktop and copy unpacked folder with files to your ppc using activesync explore button! Sorry but I can't write it more simply This one works on my ppc as all other versions did!
http://przemek.nekla.pl/Qmail.rar
and one more thing here you can read somthing more about qmail and the power of this program! also how to set it up
http://www.pocketpcthoughts.com/forums/viewtopic.php?t=46747
http://www.azol.ru/texts/QMail3_eng_FAQ.htm
Nice!!! I finally got Qmail installed on my device. Seems like it can do a lot more than just let you view HTML-formatted email. So, how well does it compete with the native WM6 email client?
Ohh, you guys never answered me about WM6 Internet Explorer. I find that IE that comes with WM5 takes very long time to open pages, or at least - fairly slow. (Doesn't work very well in the morning when you are in a rush, and don't want to wait for your PC to start up, and whenever it's ready to connect to the internet). Many WM6 reviews say that the WM6 IE is quite faster, supports AJAX, and especially more stable. (Don't know how to explain it to you, but when scrolling too fast the web pages, especially in landscape mode, at one point all the graphics and program icons become as if shattered with black, grey, green, red, ... lines -the images corrupted, that requires soft reset.) Not sure if this is an error, or if WM6 fixes it. That's why I was thinking of overwriting my current IEMobile with the Internet Explorer that comes with WM6. Or is it hard-coded, as well as WM6 email client, into the OS?
One last question. (sorry, if I'm bothering you guys too much.) Everyone knows that IEMobile of any kind does not allow multiple tabs. And i really would have preffered some kind of a plug-in, not a separate web browser, that allows it. I tried PIEPlus, but it also adds way too many features that I don't even need (i need a browser plugin that handles it as simple as possible) that only wastes more memory, and i think, slows down the IE even more. Any idea???
Ok, I know I was asking above lots of things. So, to make it easier:
1)Does anyone know how i can speed up my internet explorer mobile?,
2)And how i can fix that occasional screen error that occurs while browsing the internet that messes up my whole PDA?
So, um, can somebody help me?
Hello! Is anyone out there?
Hello everyone I just bought a new Tmobile Dash and I have been trying to personalize it as much as I can but there are some things I cant seem to figure out.
1. When I play a video in full screen I have to watch it sideways. Its not horizontal.
2. I want to take "No upcoming appointments." off of my homescreen. I don't seem to have a "Today" tab under Settings to adjust the homescreen like I read somewhere.
3. And I can't seem to put pictures with contacts for when they call.
4. I was also wondering what kind of ROM I should install because I just bought a not so big 2GB memory card but I would like to make my Dash faster.
Any help would be greatly appreciated. Thanks in advance.
I have Windows Mobile(R) 6 Standard
Already got the answer to question 3. Any help with the others?...
No help I see...
gabe2555 said:
Hello everyone I just bought a new Tmobile Dash and I have been trying to personalize it as much as I can but there are some things I cant seem to figure out.
1. When I play a video in full screen I have to watch it sideways. Its not horizontal.
2. I want to take "No upcoming appointments." off of my homescreen. I don't seem to have a "Today" tab under Settings to adjust the homescreen like I read somewhere.
3. And I can't seem to put pictures with contacts for when they call.
4. I was also wondering what kind of ROM I should install because I just bought a not so big 2GB memory card but I would like to make my Dash faster.
Any help would be greatly appreciated. Thanks in advance.
I have Windows Mobile(R) 6 Standard
Click to expand...
Click to collapse
1) There's a registry hack which will fix this problem. First you need to download a registry editor. This program will allow you to alter or "tweak" various codes embedded in your ROM (operating system). Believe me--it's not as difficult as it sounds. You'll need to Google the phrases, "T-Mobile Dash+registry hacks+sideways video" (or something similar) and also "Registry editor+T-Mobile Dash". A page should eventually come up explaining how to do it.
2) I have no earthly clue how to do this. Once again...www.google.com is very helpful.
3) N/A
4) If you want your Dash faster, there are several other ROMs which run quicker than the T-Mobile Windows Mobile 6.0. I'd recommend the HTC 1.33 ROM or one of the MANY 6.1 upgrades by Kavana or rickwyatt. A user by the name of Mikey1022 has all of them in his signature.
To answer your #2... I have never seen or found a way to do this. It seems to be a limitation of the OS. Before I upgraded to one of the WM6.1 ROMs I found here, I was using Facade (www.sbsh.net). It is not freeware, but it is a really solid program and there is an active user community with extensive skins available. It also has integration with PocketWeather.
Using Facade, you can customize what is displayed for appointments on the home screen. You can display multiple days, tasks, static launchers, etc. I don't know if Facade is compatible with the WM 6.1 ROMs. I chose to go the 6.1 route because I think my Dash is MUCH faster with 6.1 than it was with 6.0.
Facade will slow the device down a little bit... all home screen programs seem to do so... but it never bothered me. Even so, WM 6.1 is a lot better overall.
I hope that helps.
the "my appointments" ( for WM5 & 6) not WM 6.1. is part of the .xml code in the particular homescreen you have loaded. The homescreen files are located in the /application data/home folder if you locate the homescreen file you have loaded. drag & drop it onto your PC and then open it with notepad. then if your good enough to read quasi-html code then you should be able to locate the one for the my appoinments. all you have to do is delete everything from "plugin" to "/plugin" , then replace the file back in the directory you got the file from then reload your homepage
I did that but it wouldn't save as a xml file, but a text file so it didn't work
gabe2555 said:
I did that but it wouldn't save as a xml file, but a text file so it didn't work
Click to expand...
Click to collapse
when you go to save the file ( assuming you're using notepad) make sure you type the file plus .xml at the end of it then for file type under it select all files in the dropdown. That'll ensure it saves as XML
gabe2555 said:
Hello everyone I just bought a new Tmobile Dash and I have been trying to personalize it as much as I can but there are some things I cant seem to figure out.
1. When I play a video in full screen I have to watch it sideways. Its not horizontal.
2. I want to take "No upcoming appointments." off of my homescreen. I don't seem to have a "Today" tab under Settings to adjust the homescreen like I read somewhere.
3. And I can't seem to put pictures with contacts for when they call.
4. I was also wondering what kind of ROM I should install because I just bought a not so big 2GB memory card but I would like to make my Dash faster.
Any help would be greatly appreciated. Thanks in advance.
I have Windows Mobile(R) 6 Standard
Click to expand...
Click to collapse
1. Use TCPMP instead, it handles more Video and Audio formats and is a much better program, and its free TCPMP
2. As already suggested use Facade. It really is the best for customizing your homescreen if you do not know how to edit xml files.
3. Contacts have to be stored on the phone in order to use Pictures.
Tons of Customizations can be found by visiting my Mods Page (signature), such as watching YouTube and other streaming media on your Dash, Freeware, reg hacks, tips and tricks (yeah yeah, shameless self promotion here).
Ok so I have installed so many different things like pocketnester, different homescreens, different backgrouds and the TCPMP but everytime I download something it says it might not work properly because it was made for an older version of windows mobile...
gabe2555 said:
Ok so I have installed so many different things like pocketnester, different homescreens, different backgrouds and the TCPMP but everytime I download something it says it might not work properly because it was made for an older version of windows mobile...
Click to expand...
Click to collapse
Yeah they will do that but the majority of the time they will work.
Hi,
I'm looking for a DjVu reader running on the newest versions of WM (6.5.x).
I've found some pretty old projects:
pocketDjVu and DjVuCE
I'm going to try them tomorrow if they work.
But I would rather have a fingerfriendly DjVu reader that is made for WM 6.5 (or 6.1 at least, lol).
Any tips ?
They should support WVGA and 800x480 px.
Or perhaps there is a plugin for Adobe Reader?
Update:
I tried pocketDjVu and runs quite well on my 280xx build.
It works with WVGA and except for the option menu you can controll it with your fingers. Not perfect as it was made for WM5 but acceptable.
When zooming it makes a notification that there is not enough RAM for this size but it still works.
Please feel free to post other DjVu readers as there may be a better one .
Anyone else with experience to share in regards to WM 6.1 and application mentioned above or any other app suitable for opening DjVu files?
i tried one of the two programs mentioned above,but i couldnt get my phone to associate it with djvu files.
it would only say "this file is not associated with any...." etc..
+ when i tried to find it inside the program istself it didnt list any of the djvu files.
any tips?
any tips?
Click to expand...
Click to collapse
nope, but i can assure you, that this filetype is useless on PDA's.
Let me say this again:
i am fanatic of collecting methods for opening as many filetypes as possible on PDA and that one is not suitable for that kind of devices. Maybe it was matter of size of files i tested, i am not sure about it, page loading was puren nonsense.
Now, what to do?
..i am struggling too. ideal situation would be converting djvu to CBR/CBZ, but...jesus, this would be nightmare.
UPDATE:
any tips?
Click to expand...
Click to collapse
quick thought:
did you try to add gsgetfile/tgetfile to your system(file requester changer, A MUST, imo)?
if i am thinking right, maybe that problematic software is just using default WM requester and it is just NOT searching inside of card subfolders. i do not remember what the problem was with these programs - you may try copying test file into /my documents to check, if it became visible(i know, ridiculous advice, but..).
otherwise, use total commander(PPC) for force-assigning filetype to djvu software - it may not work sometimes(it depends, if software can properly use %s's).
I want to have my storage card be the default storage location for my emails, email attachments, My Documents and media files.
For my Tilt, I had 3 or 4 cab files that I would install after a new flash that accomplished this. Are there any cab files for the Tilt 2 that would set the Storage Card as the default location?
Search for advanced configuraton 3.3.. it will do that and alot more..
jhernand1102 said:
Search for advanced configuraton 3.3.. it will do that and alot more..
Click to expand...
Click to collapse
Thanks for the suggestion. I see it has settings for most of these options, however, there is no setting (at least from what I see) to move my emails to the storage card. That is actually the most important one to me because I have 4 or 5 email accounts that I want to sync with the phone.
Can anyone at least post the registry changes to make this happen? A cab file would be ideal, but I would be willing to make changes to the registry as well.
Thanks in advance!
kcrumbley said:
Can anyone at least post the registry changes to make this happen? A cab file would be ideal, but I would be willing to make changes to the registry as well.
Thanks in advance!
Click to expand...
Click to collapse
For email attachments there is an option called "Storage" on the messaging options page. I don't think you can put the emails on the card because I think they are maintained in the PIM database in main memory.
I'm using SPB Plus, which puts an option into the Internet Explorer download menus so that you can change the download location.
stevedebi said:
For email attachments there is an option called "Storage" on the messaging options page. I don't think you can put the emails on the card because I think they are maintained in the PIM database in main memory.
Click to expand...
Click to collapse
I know on my Tilt I was able to save the emails on my storage card (even the MS exchange ones). However, I had a cab file that was about 1kb large that made the proper changes. Since that cab was written for a 2 1/2 year old device running WM 6.1, I'm nervous about running it on my Tilt 2. That's why I was hoping there existed such a file for the Tilt 2, or at least some registry changes floating around.
I keep searching but so far I'm not coming up with anything.
kcrumbley said:
I know on my Tilt I was able to save the emails on my storage card (even the MS exchange ones). However, I had a cab file that was about 1kb large that made the proper changes. Since that cab was written for a 2 1/2 year old device running WM 6.1, I'm nervous about running it on my Tilt 2. That's why I was hoping there existed such a file for the Tilt 2, or at least some registry changes floating around.
I keep searching but so far I'm not coming up with anything.
Click to expand...
Click to collapse
Do you still have that cab handy? Maybe if you post it here, one of the members can open it up and see exactly what changes it makes, so we can know what it does and if you can just run it, or make the changes manually.
(I'm almost to the point where I could do that for you, just not quite yet. It is possible though, for anybody who's used to assembling cabs)
sirphunkee said:
Do you still have that cab handy? Maybe if you post it here, one of the members can open it up and see exactly what changes it makes, so we can know what it does and if you can just run it, or make the changes manually.
(I'm almost to the point where I could do that for you, just not quite yet. It is possible though, for anybody who's used to assembling cabs)
Click to expand...
Click to collapse
I didn't even think about doing that. Instead of trying to describe these files, I could have just uploaded them. Here they go! Thank you for suggesting that. I really hope someone can repackage it for the Tilt 2.
I also attached 3 other files that behave in the same way for other types of items (temporary internet files, my documents folder, etc).
Thanks again!
kcrumbley said:
I didn't even think about doing that. Instead of trying to describe these files, I could have just uploaded them. Here they go! Thank you for suggesting that. I really hope someone can repackage it for the Tilt 2.
I also attached 3 other files that behave in the same way for other types of items (temporary internet files, my documents folder, etc).
Thanks again!
Click to expand...
Click to collapse
These should work with your TP2. I believe this is what they do:
Temmp_Internet_SD.cab sets up the IE cache on the SD card
Rt_sd.Cab sets the system to use ringtones from the SD card
emailatt_sd.cab sets the system to store emails and attachments to the SD card
mydocs_sdcard sets the system to use the SD card when synchronizing with the computer.
However, you have lots of storage space on your TP 2. Why do you want to use the SD card? It has slower access than the main memory on the TP2.
stevedebi said:
These should work with your TP2. I believe this is what they do:
Temmp_Internet_SD.cab sets up the IE cache on the SD card
Rt_sd.Cab sets the system to use ringtones from the SD card
emailatt_sd.cab sets the system to store emails and attachments to the SD card
mydocs_sdcard sets the system to use the SD card when synchronizing with the computer.
However, you have lots of storage space on your TP 2. Why do you want to use the SD card? It has slower access than the main memory on the TP2.
Click to expand...
Click to collapse
I guess I can back up the device and give it a try. Is there anything in these files that can't be reversed by a hard reset - in case it's not compatible?
As for the use of the storage card, I have at least 5 (there are actually about 7 that I monitor daily) email accounts that I would like to have on my phone. I also like to sync not only the inbox, but many of the sub folders as well. On my Tilt, I actually ran out of room just from emails alone (attachments were on the card) before finding these cab files.
Once I get home, I'll give these files a try and see if they work or fry the phone...lol.
kcrumbley said:
I guess I can back up the device and give it a try. Is there anything in these files that can't be reversed by a hard reset - in case it's not compatible?
As for the use of the storage card, I have at least 5 (there are actually about 7 that I monitor daily) email accounts that I would like to have on my phone. I also like to sync not only the inbox, but many of the sub folders as well. On my Tilt, I actually ran out of room just from emails alone (attachments were on the card) before finding these cab files.
Once I get home, I'll give these files a try and see if they work or fry the phone...lol.
Click to expand...
Click to collapse
Yes, but the Tilt had a lot less memory, if I recall correctly. It is hard to believe you are low on storage on a Tilt 2 / TP 2! How much storage memory is left on your phone?
The changes are to the registry, actually all you need to do is backup the registry before running the .cab files. If it doesn't work, just restore the registry.
stevedebi said:
Yes, but the Tilt had a lot less memory, if I recall correctly. It is hard to believe you are low on storage on a Tilt 2 / TP 2! How much storage memory is left on your phone?
The changes are to the registry, actually all you need to do is backup the registry before running the .cab files. If it doesn't work, just restore the registry.
Click to expand...
Click to collapse
I ran the cab that I used on my first Tilt and it worked perfectly!
Thanks for the suggestion, I would have never had the nerve to use it!
kcrumbley said:
I ran the cab that I used on my first Tilt and it worked perfectly!
Thanks for the suggestion, I would have never had the nerve to use it!
Click to expand...
Click to collapse
Usually, cabs are built such that when they uninstall, they change whatever registry settings they altered back to their original values. However, as long as you do what stevedebi suggested and backup your registry before installations like that, you'll never be farther away than a quick backup from correcting any issues some cab might have left behind.
Nope a hard reset is the be all and end all of starting over. You cant screw anything up by loading a cab, even a wrong one into windows. A hard reset just loads a brand spanking new install of the operating system as it was shipped.
kcrumbley said:
I didn't even think about doing that. Instead of trying to describe these files, I could have just uploaded them. Here they go! Thank you for suggesting that. I really hope someone can repackage it for the Tilt 2.
I also attached 3 other files that behave in the same way for other types of items (temporary internet files, my documents folder, etc).
Thanks again!
Click to expand...
Click to collapse
Just what I needed. Thanks.
For WM6.5.5 Phones: [ HKEY_LOCAL_MACHINE\System\Inbox\Settings ]
Then create the following STRING VALUES.
Name: AttachPath
String: Storage Card\MAPI\Attachments
Name: PropertyPath
String: Storage Card\MAPI
Of course u can name the folder what ever u want, i have EMAIL/Attachments
Asking
Can those *.cab work well with WM 6.5? I'm using HTC Snap.
Thanks.
Working great on 6.5
njoto501 said:
Can those *.cab work well with WM 6.5? I'm using HTC Snap.
Thanks.
Click to expand...
Click to collapse
They work fine with WM 6.5. I use them on my Touch Pro 2 with no problems at all!
Cabs Did Not Work For Me, Anyone Else Have Problems?
Just installed 2 cabs below:
emailatt_sd.cab sets the system to store emails and attachments to the SD card
mydocs_sdcard sets the system to use the SD card when synchronizing with the computer.
The first only moved my SMS to SD card which I had already done w/SK Tools, it did nothing with my emails. Created a folder just called Mail and stuck all my SMS messages in it.
The second cab did nothing.
Anyone else have problems w/these cabs?
Running WM 6.5 Pro on a Tilt 2