Related
Anyone bought the 24.99 Body Glove Cover for the Evo? Care to show some pics and if you liked it and comments.
Thanks.
Fixter said:
Anyone bought the 24.99 Body Glove Cover for the Evo? Care to show some pics and if you liked it and comments.
Thanks.
Click to expand...
Click to collapse
I bought the 15 dollar cover which is 11 dollars with 25% off and Tax. If thats what you ment. I also applied Zagg Case Full body. Its like a silicone if thats what you want to know about its ok. Protects nicks from drops
No I meant this Body Glove Cover
http://shop.sprint.com/NASApp/onlin...ryID=CZH5070R&topPageNumber=0&subPageNumber=0
Apparently no one has it. Because it was never sold at a Sprint Store.
Fixter said:
No I meant this Body Glove Cover
http://shop.sprint.com/NASApp/onlin...ryID=CZH5070R&topPageNumber=0&subPageNumber=0
Apparently no one has it. Because it was never sold at a Sprint Store.
Click to expand...
Click to collapse
Looks awesome but I would still get a Zagg cover
Im gonna go ahead and order it and post pictures and such.
I've got the Body Glove that I bought with my phone in a Sprint store and think that its awesome...
Very thin, but fragile when taking it apart because of how thin one part of it is and how you need to seperate it.
The back is the only part that is tacky, do unlike the Body Glove for the Hero, this one does not stick to everything from every angle so they clearly learned their lesson. The rest is high polish black plastic and is quite attractive.
I'll take some pictures later.
R
I was going to get one but if you look up some reviews on it, it appears it might break (meaning the tabs would break off), I have 3 batteries and ordered a 2 more knock offs to go with the 3 htc I have as a couple were from my touch pro 2. The problem I have is if I change the battery a lot,would the case crack the mounting tabs? Also I have heard from people with the body glove cases they scratch the sides of the phone. I did install the ghost armor and was thinking of putting this over it, but the clips breaking or possibly breaking with me changing batteries really worries me.... There is a review of someone with video clips of the case... I wish they had felt all around it and I would probably get one.
i got this case, and think its pretty good, from the front you can barely tell a case is on there, the back is kinda tacky, but its growing on me. i do think it will be hard to get in and out of the case, but im ok with that. if i dont like it i may just go with a cheap silicon case after a while...or maybe the seido case. i like it better than my silicon case on the hero because it always got stuck in my pocket, this one doesnt, its easy in an out.
oh yea, and its doesnt get as dirty, or have lint and **** stick to it as easy as the silicon case. plus silicon cases just look to cheap ass...this phone deserves better.
Fixter said:
No I meant this Body Glove Cover
http://shop.sprint.com/NASApp/onlin...ryID=CZH5070R&topPageNumber=0&subPageNumber=0
Apparently no one has it. Because it was never sold at a Sprint Store.
Click to expand...
Click to collapse
They had this at my sprint store. The salesman was nice enough to let me try all the cases they had on my phone (today not launch day). By far I think the silicone one is he best, it's the cheapest thinest easiest to put on and remove and it says htc on the back. I hated the body glove one for the same reason as best buys platinum one. It adds to much thickness feels cheap in hand and is a pita to take off.
Oh yeah and with the silicone one its much easier to hit the power button than without any case and the body glove one made it a bit harder to hit the power button over stock.
i have the body glove.. picked it up as I wanted to have atleast some sort of protection.
Its ok so far. Doesn't add bulkyness at all.
I brought the body glove case as well from sprint today. I like it but as the op stated earlier it is hard to hit the power button. The one thing about it that bothers me is that it doesn't snap completely at the vol up/down area. I'm not sure if anyone else who owns the body glove case has the same issue as I do.
Well that helps me decided. I guess I'm sticking with my Silicone Gel from Sprint. Its pretty good for its purposes.
stylz3 said:
I brought the body glove case as well from sprint today. I like it but as the op stated earlier it is hard to hit the power button. The one thing about it that bothers me is that it doesn't snap completely at the vol up/down area. I'm not sure if anyone else who owns the body glove case has the same issue as I do.
Click to expand...
Click to collapse
I actually modified my body glove case where the volume buttons are I snipped of the thin flimsy piece on the top half much better.
Also incase anyone wants to know the evo with the body glove case fits in the leather belt pouch sprint also sells. For me this is all temporary until they release the charging case.
Sent from my PC36100 using Tapatalk
I would not buy that case. I got mine on release day. The piece of plastic around the volume rocker area is super thin. I had the case for less than a day before that thin strip of plastic broke. I think I'm holding out for that charging case.
-------------------------------------
Sent via the XDA Tapatalk App
Fixter said:
No I meant this Body Glove Cover
http://shop.sprint.com/NASApp/onlin...ryID=CZH5070R&topPageNumber=0&subPageNumber=0
Apparently no one has it. Because it was never sold at a Sprint Store.
Click to expand...
Click to collapse
i bought it and i like it alot i though it was gonna be like the body glove from the hero that i also liked but not the bulky but the way it protected hehe
my room mate went out and bought some 3 pack from a sprint store in the mall, and gave me the body glove one posted, and to be honest, mines perfect.
the entire thing snapped together perfect, i havent had to take it apart yet.. so i suppose it could wreck it, since it is kinda flimsy, but i think its about perfect.
i have some thin blue resin rubber case on my nexus, and thats what i really wanted, but ****, this makes the phone look pretty sleek, and ive dropped it a few times already, and the case seems to take it, no splitting.
again, volume rocker area, and power button area, are snapped together perfect, no gaps. need pics?
I have it I like it no issues with the volume rocker area because thats the first corner I snap together
Fixter said:
Anyone bought the 24.99 Body Glove Cover for the Evo? Care to show some pics and if you liked it and comments.
Thanks.
Click to expand...
Click to collapse
also before you go starting new threads you might wanna look around abit more http://forum.xda-developers.com/showpost.php?p=6676258&postcount=12
Posted a pic of this case when I bought it 3 days ago
case broke in 1 day
I got this case Friday with my new phone, but by Saturday evening, it had broken. There is a really thin and fragile piece of the case that goes around the volume rocker, that got a lot of stress just from it's placement and broke.
-_-
cclinco said:
I got this case Friday with my new phone, but by Saturday evening, it had broken. There is a really thin and fragile piece of the case that goes around the volume rocker, that got a lot of stress just from it's placement and broke.
-_-
Click to expand...
Click to collapse
That is what happened to mine. I returned mine to sprint and they gave me a full refund. Now I'm in a bind between getting the 3 pack from sprint or getting the innocase II.
I got my hands on both of these cases and did a quick review if anyones interested. I have to say im impressed with the official flip case, its the one i use on a daily basis atm.
http://droid-den.com/accessory-reviews/official-samsung-galaxy-note-flip-cover-review/
http://droid-den.com/accessory-reviews/samsung-galaxy-note-flexishield-case-review/
that is great, i was on the fence with the flip cover for a bit, thank you for going the extra bit and getting both!
I had the craziest of ideas but do you think with a little bit of patience and modding that you would be able to put a slice in the gel case and slip the back cover of the flip case through it and use both?
I am not sure when ill next be able to buy another phone seeing as this one started WWIII at my house and i think i may need to really baby it, i also think if its possible we might be able to use the gel case somehow to hold the flap down, tiny magnets, who knows, im just curious if you think this is possible
Flip Case is great, works like a dream and it's raised case protects the Camera Lens, unlike the factory fitted back, one slight issue is that the Note will not slip into the 'Official' car mount when it is in the Flip case. You can snip a bit from the case to help but due to the extra width (... ;-) ) it stands proud on the one edge.
Samsung naughty designers...
Mrglass86 said:
that is great, i was on the fence with the flip cover for a bit, thank you for going the extra bit and getting both!
I had the craziest of ideas but do you think with a little bit of patience and modding that you would be able to put a slice in the gel case and slip the back cover of the flip case through it and use both?
I am not sure when ill next be able to buy another phone seeing as this one started WWIII at my house and i think i may need to really baby it, i also think if its possible we might be able to use the gel case somehow to hold the flap down, tiny magnets, who knows, im just curious if you think this is possible
Click to expand...
Click to collapse
Ha, I actually tried this but must have forgot to mention it in the review. No modding required it does fit in. The case warps very very slightly on the left side where the flip case joint is, but it works reasonably well though!
Not sure about holding the flap down, but it only slightly lifts itself up, it sometimes lifts very high, but just pressing it down is enough to keep it down
I am thinking about using both cases togather , would you send a picture please for using them togather ?
Been using my flip case for a couple of days. I wasn't sure at first but love it now.
Feels like part of the phone.
Sent from my GT-N7000 using Tapatalk
tamerh said:
I am thinking about using both cases togather , would you send a picture please for using them togather ?
Click to expand...
Click to collapse
+1 to this and also do you like your gel case enough that if you were to buy another it would be that one again or take your chances on one of the other gel cases out there? thanks for trying the two cases together too, im too broke to risk it not working.
Mrglass86 said:
I had the craziest of ideas but do you think with a little bit of patience and modding that you would be able to put a slice in the gel case and slip the back cover of the flip case through it and use both?
Click to expand...
Click to collapse
+1
I'm thinking of just cutting the front flap and glue the side leather on top of the gel cover's side, close to the back cover's side, so it will have full range of motion. Reuse the original backcover for better fit. Then just a tiny velcro patch on the other side to keep it closed.
tamerh said:
I am thinking about using both cases togather , would you send a picture please for using them togather ?
Click to expand...
Click to collapse
Ahh ok, I'll do this tonight
Mrglass86 said:
+1 to this and also do you like your gel case enough that if you were to buy another it would be that one again or take your chances on one of the other gel cases out there? thanks for trying the two cases together too, im too broke to risk it not working.
Click to expand...
Click to collapse
I don't think so, to be honest I'm not really a fan of gel cases anyway so I wouldn't buy any. Flexishield ones are the most popular gel ones tho
tamarian said:
+1
I'm thinking of just cutting the front flap and glue the side leather on top of the gel cover's side, close to the back cover's side, so it will have full range of motion. Reuse the original backcover for better fit. Then just a tiny velcro patch on the other side to keep it closed.
Click to expand...
Click to collapse
Good idea, its better to keep the full range, because I would hate the flip cover if it didn't flip all the way around.
tamarian said:
+1
I'm thinking of just cutting the front flap and glue the side leather on top of the gel cover's side, close to the back cover's side, so it will have full range of motion. Reuse the original backcover for better fit. Then just a tiny velcro patch on the other side to keep it closed.
Click to expand...
Click to collapse
Please post pictures how you do that and what glue you use for it to hold for long time, and look aesthetic.
I would like to do the same probably
been using the flip case for about nearly a month now in tropical weather, and the edges of the flip top have "melted" and become sticky. ugh!
have been using it for the past 3 days since i got my phone, the edges of the thin silicon lining peeled off. Soon the leather cover is gonna go in a matters of weeks.
dan008 said:
have been using it for the past 3 days since i got my phone, the edges of the thin silicon lining peeled off. Soon the leather cover is gonna go in a matters of weeks.
Click to expand...
Click to collapse
Took mine a couple of weeks, and now it's starting. Here's a pic:
ouch, haven't had that with mine yet. Either you guys are rougher than me, or i'm just lucky
Found the original, sealed Samsung flip case on eBay from a US seller for $45 shipped.
Will be here in a few days. I'm stoked!
ericshmerick said:
Found the original, sealed Samsung flip case on eBay from a US seller for $45 shipped.
Will be here in a few days. I'm stoked!
Click to expand...
Click to collapse
Expansys has it for $32.
Sent from my GT-N7000 using xda premium
xAnimal5 said:
Expansys has it for $32.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Free 2 day shipping?
In stock in 8 days. Plus the shipping time.
No thanks.
The original Samsung flip case is not very good quality. Mine just started falling a part after one month
Sent from my GT-N7000 using XDA App
masiegel said:
The original Samsung flip case is not very good quality. Mine just started falling a part after one month
Sent from my GT-N7000 using XDA App
Click to expand...
Click to collapse
Any suggested alternatives? I don't want to use a screen film. Just want to protect it from the inevitable drop.
Sorry but I haven't found the perfect protection for mine either.
Sent from my GT-N7000 using XDA App
Got a cheap case on eBay with a magnetic clip
After 1 week it has buggered screen up... see picture
Anyone else had any problems and more importantly will screen return to normal or is this now an insurance job?
ViaraiX said:
Got a cheap case on eBay with a magnetic clip
After 1 week it has buggered screen up... see picture
Anyone else had any problems and more importantly will screen return to normal or is this now an insurance job?
Click to expand...
Click to collapse
I'd be geting on to the people you bought it off, Chinese copies probably
Left out of case overnight and screen back to normal! Time for the bin for that, back to scratching camera lens though until I get new one
So I dropped my GNEX and the bottom right corner is now cracked. So I ordered a replacement screen/digitizer/frame set off of ebay.
The part I ordered is coming from China and looks exactly like my device. Has anyone ordered anything from China and know if it is actually the same display/quality as what came with my phone?
Here is what I ordered....
http://www.ebay.com/itm/320981316812?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
thanks
Hi I've gone and dropped my phone without my case on and have cracked the actual phone case itself on the back, screens absolutely fine. Can anyone suggest where I can buy one online??
Thanks in advance.....
X
Picture?
hughesey said:
Hi I've gone and dropped my phone without my case on and have cracked the actual phone case itself on the back, screens absolutely fine. Can anyone suggest where I can buy one online??
Thanks in advance.....
X
Click to expand...
Click to collapse
Are you saying you cracked the rear/back glass? DId you purchase accident protection?
Yeah the actual back of the phone
Anyone??
Rear Glass
Here you go e.g. :
meintrendyhandy.de/shop/sony-xperia-z3-157681p.html
Vladok1994 said:
Here you go e.g. :
meintrendyhandy.de/shop/sony-xperia-z3-157681p.html
Click to expand...
Click to collapse
Thanks for the link! Do you know if its a proper genuine back cover? Worried that it will just be a generic china copy.
I'm too worried about these glass backs, always keep a fusion type case on those types of phones. Look stylish with those clear backs but also protective. Normally I'd buy spigen but as they hardly had anything for this phone, I went for one from Orzly.