I got my hands on both of these cases and did a quick review if anyones interested. I have to say im impressed with the official flip case, its the one i use on a daily basis atm.
http://droid-den.com/accessory-reviews/official-samsung-galaxy-note-flip-cover-review/
http://droid-den.com/accessory-reviews/samsung-galaxy-note-flexishield-case-review/
that is great, i was on the fence with the flip cover for a bit, thank you for going the extra bit and getting both!
I had the craziest of ideas but do you think with a little bit of patience and modding that you would be able to put a slice in the gel case and slip the back cover of the flip case through it and use both?
I am not sure when ill next be able to buy another phone seeing as this one started WWIII at my house and i think i may need to really baby it, i also think if its possible we might be able to use the gel case somehow to hold the flap down, tiny magnets, who knows, im just curious if you think this is possible
Flip Case is great, works like a dream and it's raised case protects the Camera Lens, unlike the factory fitted back, one slight issue is that the Note will not slip into the 'Official' car mount when it is in the Flip case. You can snip a bit from the case to help but due to the extra width (... ;-) ) it stands proud on the one edge.
Samsung naughty designers...
Mrglass86 said:
that is great, i was on the fence with the flip cover for a bit, thank you for going the extra bit and getting both!
I had the craziest of ideas but do you think with a little bit of patience and modding that you would be able to put a slice in the gel case and slip the back cover of the flip case through it and use both?
I am not sure when ill next be able to buy another phone seeing as this one started WWIII at my house and i think i may need to really baby it, i also think if its possible we might be able to use the gel case somehow to hold the flap down, tiny magnets, who knows, im just curious if you think this is possible
Click to expand...
Click to collapse
Ha, I actually tried this but must have forgot to mention it in the review. No modding required it does fit in. The case warps very very slightly on the left side where the flip case joint is, but it works reasonably well though!
Not sure about holding the flap down, but it only slightly lifts itself up, it sometimes lifts very high, but just pressing it down is enough to keep it down
I am thinking about using both cases togather , would you send a picture please for using them togather ?
Been using my flip case for a couple of days. I wasn't sure at first but love it now.
Feels like part of the phone.
Sent from my GT-N7000 using Tapatalk
tamerh said:
I am thinking about using both cases togather , would you send a picture please for using them togather ?
Click to expand...
Click to collapse
+1 to this and also do you like your gel case enough that if you were to buy another it would be that one again or take your chances on one of the other gel cases out there? thanks for trying the two cases together too, im too broke to risk it not working.
Mrglass86 said:
I had the craziest of ideas but do you think with a little bit of patience and modding that you would be able to put a slice in the gel case and slip the back cover of the flip case through it and use both?
Click to expand...
Click to collapse
+1
I'm thinking of just cutting the front flap and glue the side leather on top of the gel cover's side, close to the back cover's side, so it will have full range of motion. Reuse the original backcover for better fit. Then just a tiny velcro patch on the other side to keep it closed.
tamerh said:
I am thinking about using both cases togather , would you send a picture please for using them togather ?
Click to expand...
Click to collapse
Ahh ok, I'll do this tonight
Mrglass86 said:
+1 to this and also do you like your gel case enough that if you were to buy another it would be that one again or take your chances on one of the other gel cases out there? thanks for trying the two cases together too, im too broke to risk it not working.
Click to expand...
Click to collapse
I don't think so, to be honest I'm not really a fan of gel cases anyway so I wouldn't buy any. Flexishield ones are the most popular gel ones tho
tamarian said:
+1
I'm thinking of just cutting the front flap and glue the side leather on top of the gel cover's side, close to the back cover's side, so it will have full range of motion. Reuse the original backcover for better fit. Then just a tiny velcro patch on the other side to keep it closed.
Click to expand...
Click to collapse
Good idea, its better to keep the full range, because I would hate the flip cover if it didn't flip all the way around.
tamarian said:
+1
I'm thinking of just cutting the front flap and glue the side leather on top of the gel cover's side, close to the back cover's side, so it will have full range of motion. Reuse the original backcover for better fit. Then just a tiny velcro patch on the other side to keep it closed.
Click to expand...
Click to collapse
Please post pictures how you do that and what glue you use for it to hold for long time, and look aesthetic.
I would like to do the same probably
been using the flip case for about nearly a month now in tropical weather, and the edges of the flip top have "melted" and become sticky. ugh!
have been using it for the past 3 days since i got my phone, the edges of the thin silicon lining peeled off. Soon the leather cover is gonna go in a matters of weeks.
dan008 said:
have been using it for the past 3 days since i got my phone, the edges of the thin silicon lining peeled off. Soon the leather cover is gonna go in a matters of weeks.
Click to expand...
Click to collapse
Took mine a couple of weeks, and now it's starting. Here's a pic:
ouch, haven't had that with mine yet. Either you guys are rougher than me, or i'm just lucky
Found the original, sealed Samsung flip case on eBay from a US seller for $45 shipped.
Will be here in a few days. I'm stoked!
ericshmerick said:
Found the original, sealed Samsung flip case on eBay from a US seller for $45 shipped.
Will be here in a few days. I'm stoked!
Click to expand...
Click to collapse
Expansys has it for $32.
Sent from my GT-N7000 using xda premium
xAnimal5 said:
Expansys has it for $32.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Free 2 day shipping?
In stock in 8 days. Plus the shipping time.
No thanks.
The original Samsung flip case is not very good quality. Mine just started falling a part after one month
Sent from my GT-N7000 using XDA App
masiegel said:
The original Samsung flip case is not very good quality. Mine just started falling a part after one month
Sent from my GT-N7000 using XDA App
Click to expand...
Click to collapse
Any suggested alternatives? I don't want to use a screen film. Just want to protect it from the inevitable drop.
Sorry but I haven't found the perfect protection for mine either.
Sent from my GT-N7000 using XDA App
Related
Hey guys, i got this in a few days ago so I can verify it fits the MOTOROLA DROID X not the Samsung that the description says.
You can even tell by the part # that it is made for the DROID X. Why Verizon has it screwed up I dont know, but it is the ONLY face-in snap-in holster I have found.
http://www.verizonwireless.com/b2c/store/accessory?action=accessoryDetails&accessoryId=46229
Enjoy, I will post pics of it on my phone in a bit.
They have a better one that comes with a back shel also
It is called shell/holster combo for $30
Sent from my DROIDX using Tapatalk
I have the holster. It's a little flimsy and I'm probably going to replace it with the Seidio. As for the holster shell combo, it sucks. I had it for my incredible and it gets loose.
Sent from my DROIDX
Check out this one...
http://store.androidcentral.com/verizon-shell--holster-combo/4A24A7318.htm
I like that better because it comes with the protective case, and its a clip on.
That's the one I had, it's made by Amzer. It doesn't protect the top of the device either. Mine fell out of the holster and dinged up the top of my phone.
Yourrid said:
Check out this one...
...store.androidcentral.com/verizon-shell--holster-combo/4A24A7318.htm
I like that better because it comes with the protective case, and its a clip on.
Click to expand...
Click to collapse
I have this one and hope it loosens up over time. Right now, it takes two hands to get the phone out of the holster because it's so tight. It works great for me though, no worrying about the phone falling out of the holster.
SW
SideWynder said:
I have this one and hope it loosens up over time. Right now, it takes two hands to get the phone out of the holster because it's so tight. It works great for me though, no worrying about the phone falling out of the holster.
SW
Click to expand...
Click to collapse
I might have to get this one then, if its that tight.
I work at an auto parts store so im constantly moving around, brushing up against greasy things or crawling under people's cars so I need some protection for my phone. How is the quality of the case?
Also, does the case wrap around the front of the phone? I mean if I lay the phone face down will the screen touch or will the case protect it?
Yes, the case does wrap around the front enough to keep the glass off the counter when you lay it down. Both the shell and the hoster are rigid with a rubberized feel.
It doesn't add a lot of bulk to the phone like some cases I've looked at, so the phone is pocketable when you want to go without the holster.
I picked mine up in my Verizon store, so would recommend you stop at one and ask to see it on an X.
SideWynder said:
Yes, the case does wrap around the front enough to keep the glass off the counter when you lay it down. Both the shell and the hoster are rigid with a rubberized feel.
It doesn't add a lot of bulk to the phone like some cases I've looked at, so the phone is pocketable when you want to go without the holster.
I picked mine up in my Verizon store, so would recommend you stop at one and ask to see it on an X.
Click to expand...
Click to collapse
yea im going out tomorrow to buy that thing. it was exactly what I was looking for... I need a good screen protector too, as i usually have dirt and grime on my hands from dealing with car parts. I heard Vzw screen protectors suck and dont even cover the whole glass. Any recommendations?
Yourrid said:
yea im going out tomorrow to buy that thing. it was exactly what I was looking for... I need a good screen protector too, as i usually have dirt and grime on my hands from dealing with car parts. I heard Vzw screen protectors suck and dont even cover the whole glass. Any recommendations?
Click to expand...
Click to collapse
Yes i have this holster. Just picked it up yesterday. And it seems secure and I liked the look and the feel of it in my hand. Just didn't like that it left the top of the phone exposed. In the holster its protected though. Its when you take it out it seems like it could possibly get dinged at the top of the phone if it fell. Otherwise it seems pretty cool. Im looking to see if someone comes out with a holster that includes complete coverage of the phone and holster combo. I think they didn't cover the top because the antenna is located there. Not sure but just a theory.
Yourrid said:
yea im going out tomorrow to buy that thing. it was exactly what I was looking for... I need a good screen protector too, as i usually have dirt and grime on my hands from dealing with car parts. I heard Vzw screen protectors suck and dont even cover the whole glass. Any recommendations?
Click to expand...
Click to collapse
The screen protectors we talk about in this thread (the SGP Crystal Clear ones) are the best by far, and they also have the anti-fingerprint ones too.
http://forum.xda-developers.com/showthread.php?t=738601
Returned the hard silicon one they sell and got me the shell/holster combo. Awsome!
Sent from my DROIDX using XDA App
SideWynder said:
I have this one and hope it loosens up over time. Right now, it takes two hands to get the phone out of the holster because it's so tight.
Click to expand...
Click to collapse
I had a girlfriend like that once
OneStepAhead said:
I had a girlfriend like that once
Click to expand...
Click to collapse
+1 for Hilarity
GoldenCyn said:
Returned the hard silicon one they sell and got me the shell/holster combo. Awsome!
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
I have that one too but the matte black finish is peeling off very ugly as it does. Love the function exactly what I wanted, but the shiney plastic under the finish looks terrible. Just my two cents.
Sent from my DROIDX using XDA App
I had an idea for a holder that works as a belt buckle a few years ago hahaha
Sent from my DROIDX using xda premium
i use this case it is great i have another similar one for my razr HD
I looking at leather flip cases...but i want one that flips up...it jus seems more natural and convenient. Is there a reason why every flip case i have searches through online like 50...on ebay and amazon all flip down?
Anyone find a flip up?
or one without that buckle belt.....seems half pointless...its not going to open by itself on a table or in your pocket without it. And when/if you drop it 90% you would of unfastened it already.
And where about on the phone is the compass located...and where do these flip covers normally have the magnet...on the buckle bit on the bit the buckle attaches to...worrying about the compass
I have seen some but dont remember where. They flip down because otherwise they will cover the camera..
Vrasidas said:
I have seen some but dont remember where. They flip down because otherwise they will cover the camera..
Click to expand...
Click to collapse
nice point
terrapin case at amazon is quite a nice case . it has a double crease that let you fold right back as to not cover camera. and less than a tenner. this was my first case for my sgs2 but decided to go for screen protector and case mate tough as found the flip a bit annoying due to the size. now looking for an upgrade for the casemate tough now as i keep getting echos. as soon as i take the case of it stops? bit strange. but i am using the terrapin again until i find another.
I've got a Tuff-Luv from Amazon.
http://tuff-luv.com/genuine-leather-case-cover-for-samsung-galaxy-s2-mobile-phone-black.html
It's a nice cases, it does the job pretty nicely, and the phone is really well protected against shocks. Have a look on a youtube demonstration .... It's a nice stunt party ;-)
woaloo said:
It's a nice cases, it does the job pretty nicely, and the phone is really well protected against shocks.
Click to expand...
Click to collapse
Are the close clips magnetic? Always weary of magnetic cases, while some people say they're safe, I'm not willing to proove them right...
Sent from my GT-I9100 using XDA App
Hi GUys, I currently had Flip down case for SGS2, i want to know, is magnetic from the flip case affected our phone if we use for long period calling or something will affect the super amoled screen?
ClarkyAC said:
Are the close clips magnetic? Always weary of magnetic cases, while some people say they're safe, I'm not willing to proove them right...
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Nope, those clip are not magnetic. It's mechanic. I don't know the term in english. (in french, it is "bouton pression") google translation says "snap"...
Hope it helps
If you have a flip case does that mean i shouldn't bother with a screen protector...i'm sure the gorilla glass will take care of the rest
Flipups will be found in your local market phone traders stall .
jje
What about the headphone jack??
If the case flips up and you have a headphone connected, don't you have to disconnect the headphone before you flip up the case!?
Just my five cents!
// Ohamn
I orderd 25days ago a piel frama custom case, they are really awesome.
Sent from my GT-I9100 using Tapatalk
vitalij92 said:
I orderd 25days ago a piel frama custom case, they are really awesome.
Click to expand...
Click to collapse
Price is also awesome... more than 100$ ....oups
My original case (whick I think is brilliant but has a big manufacturing fault)is starting to fall apart at the edges as with most other users.I thought about applying super glue or tape but wanted to see if anyone was able to solve the problem before I begin experimenting.
zaki67 said:
My original case (whick I think is brilliant but has a big manufacturing fault)is starting to fall apart at the edges as with most other users.I thought about applying super glue or tape but wanted to see if anyone was able to solve the problem before I begin experimenting.
Click to expand...
Click to collapse
samsung uses a very bad leather material and sometimes it feels like raxine, im getting the original samsung pouch, much better than the flip case... btw ,y flip case came with the device. sucks though !
tids2k said:
samsung uses a very bad leather material and sometimes it feels like raxine, im getting the original samsung pouch, much better than the flip case... btw ,y flip case came with the device. sucks though !
Click to expand...
Click to collapse
Very true ,I wondered how the people who made such a good device can make such a bad cover for the case ,problem is it is very practical and does not add size ,I have the Zenus case also but I prefer the Samsung which is falling apart!
I bought a I would recommend going for a full body skin as the full body protectors give the same protection that a case does but without the added thickness.
My flip cover went through the same as yours, I superglued it but even then it kept coming off.
BTW... I went to the samsung store to see if they had the MHL adaptor, there was a galaxy note booth and the guy there wanted to ask me if I had any grievances...
Told him about the flip cover and the lack of gorilla glass (dont you get me started on that ) The guy later came home and collected my flip cover and said its being sent to samsung and i should hear a reply from them in 2 months... have NO idea what that was about... dont use it anyway so gave it to him...
Yeah, paid $45 for mine. It's cheap junk but a good idea.
Wouah.mine still good. Only a week yet. Too bad i like the flip case a lot!
Sent from my GT-N7000 using XDA App
valtersboze said:
Wouah.mine still good. Only a week yet. Too bad i like the flip case a lot!
Sent from my GT-N7000 using XDA App
Click to expand...
Click to collapse
Guess you are lucky, mine started falling apart since day 3
SAMSUNG THE FLIP COVER IS VERY COOL BUT QUALITY IS BAD SO PLEASE IMPROVE THE QUALITY OF IT BEFORE YOU RELEASE 100.000 MORE OF THESE!
You still have 200.000 of the bad ones?
Give THOSE for free and give THE GOOD ONE when someone pays for it!
A lucky flip cover user here too. Using it for about 5 weeks now. And that includes a lot of trouser pocket time.
ericshmerick said:
Yeah, paid $45 for mine. It's cheap junk but a good idea.
Click to expand...
Click to collapse
At least this flip cover back is thick enough to protect the camera lens better than the stock thin battery cover which doesn't.
Woah~ got mines as a bonus w/ phone. Going on 2 wks old and still intact but the back cover pops out once a while. Not as annoying yet, however I already ordered my Zenus leather case.
http://www.expansys-usa.com/samsung-original-flip-cover-case-for-galaxy-note-5-3-white-224797/
Expansys is dropping prices every other week it seems. You can get it now for $32 + fatwallet cashback 2% on top of your credit card reward choice.
And anyone looking for WHITE S-pen replacements, then ebay seller shimshop has some.
I thought I was one of the lucky ones also but unfortunately sooner our later the case goes bad.
I agree that Samsung should release a better version.
Sent from my GT-N7000 using xda premium
Zhoreb said:
A lucky flip cover user here too. Using it for about 5 weeks now. And that includes a lot of trouser pocket time.
Click to expand...
Click to collapse
Yep, me too. Put it on the day i bought the note (sometime in November - release day UK) and it's still like new! Admittedly, being winter, i have only put it in the inside pocket of a jacket or coat. Maybe it has a chemical reaction to jeans!
zaki67 said:
My original case (whick I think is brilliant but has a big manufacturing fault)is starting to fall apart at the edges as with most other users.I thought about applying super glue or tape but wanted to see if anyone was able to solve the problem before I begin experimenting.
Click to expand...
Click to collapse
I also love my 'now starting to fall apart case' - did you try glue or tape?
stephen dagostino said:
I also love my 'now starting to fall apart case' - did you try glue or tape?
Click to expand...
Click to collapse
Actually I wanted to check if anyone found a suitable fix before experimenting
Sent from my GT-N7000 using xda premium
legion1911 said:
SAMSUNG THE FLIP COVER IS VERY COOL BUT QUALITY IS BAD SO PLEASE IMPROVE THE QUALITY OF IT BEFORE YOU RELEASE 100.000 MORE OF THESE!
You still have 200.000 of the bad ones?
Give THOSE for free and give THE GOOD ONE when someone pays for it!
Click to expand...
Click to collapse
agree.
I have the Original flip cover too, and yes I Love it too. The edges are wearing, I thought by now someone would have made an aluminum flip case. Thought about ordering the aluminum battery case, but I want the front to be the same and work like the Original flip case.
Somehow leather products with "glued" edges do fall apart quite easily. Happens to ladies' handbags all the time!
As for how to fix it, the answer is simple: blanket stitching!
holgalee said:
Somehow leather products with "glued" edges do fall apart quite easily. Happens to ladies' handbags all the time!
As for how to fix it, the answer is simple: blanket stitching!
Click to expand...
Click to collapse
Ha ha, brilliant! anyone volunteering?
stephen dagostino said:
Ha ha, brilliant! anyone volunteering?
Click to expand...
Click to collapse
I'll try it as I have nothing to lose I am currently on a business trip as soon as I am back I'll give it a try .I think I'll try a leather repair ship.
Sent from my GT-N7000 using xda premium
I can't believe we're all being so tolerant!
This crappy fall-apart "case" from Samsung is totally unacceptable!
They must have known they had a problem when they started to give them out free.
They should have recycled and remade the lot PROPERLY.
Let me start this review just by saying that i love bumper cases. I
have been looking over the internet to find the best bumper case for
our Galaxy s3. I came across this case. Its a STRONG silicone bumper
that completes me in every aspect.
First of all. Its cheap. I think that everyone can try a cheap case
and if they dont like it, they throw it to their dog. (hehehe) Guys,
seriously. this is the best bumper case i have seen over the internet.
Why? It has a nice touch when you are holding your
phone. VERY nice touch. You will want to just hold your phone because
it has a nice feel Second of all: PROTECTION. And i mean it. Front,
back and sides are fully protected.
Front side (screen): the case has a slight bump on the edges so if the
phone drops the floor, its still protected (floor not the road hehe).
Back: Again, the case has a bump on the edges. So if your phone drops
on the back, protected!!! if you want to lay down your phone on a
table: PROTECTED.
Sides: Full protection, which is obvious why: its the case hehe.
Buttons: FULLy accessible button, both power and volume buttons. They
are covered by a soft silicone so there are very easy to press
(compare to the other tpu case i have reviewed)
I dont know if there are more colours available. You must check on
sellers ebay site.
Rating: If this case would be rated its a rock solid 5/5. Believe me
on this. It defenently worths every peny guys. I even compare it with
a TPU bumper case, that i have reviewed last week, amd this is by far
better.
Enjoy the pictures. I tried to take as many as possible.
I will review more bumper cases in the near future so stay tuned.
You can buy this on this link:
http://www.ebay.com/itm/Simple-Blac...620863?pt=PDA_Accessories&hash=item3f1b0aa03f
if you find this review helpful, hit thanks
Nice review! Around the volume rocker it might need a little work but I've already ordered one of these.. 4$ shipped to Canada and it looks decent.
Thanks for the review!
You will like the case mate, i guarantee you that. Feedback when you get it so everyone knows from you too
Good review, I have the white one. Easily the best case.
Owned a casemate brushed aluminum and SGP neo case
Sent from my Nexus 7 using Tapatalk 2
i have two of this. It comes apart easily, especially where the micro usb hole is. Very good review though. Waiting to get the sgp one because i too love bumpers
Sent from my SGH-T999 using xda app-developers app
Xcor3 said:
i have two of this. It comes apart easily, especially where the micro usb hole is. Very good review though. Waiting to get the sgp one because i too love bumpers
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I love the idea of this case, but had a similar one for my Galaxy Nexus which fell apart in a matter of days. Would be interested in reading an updated review of this one in a few weeks.
I have this case on my phone for a while and feels very steady guys. Note that i am snaping batteries daily, so the case comes on and off (by me i mean) and I havent got a problem so far.
Xcor3 said:
i have two of this. It comes apart easily, especially where the micro usb hole is. Very good review though. Waiting to get the sgp one because i too love bumpers
Click to expand...
Click to collapse
davpel said:
I love the idea of this case, but had a similar one for my Galaxy Nexus which fell apart in a matter of days. Would be interested in reading an updated review of this one in a few weeks.
Click to expand...
Click to collapse
Do you guys mean the material of the case degraded? This is all one-piece right? I was JUST shopping for my first bumper case and saw some aluminum ones that snap or screw together, but it seemed like the TPU ones are just a single piece of material and wrap around the edges.
Its a single piece mate. Plus you dont lose any signal plus its a snap in snap out plus its veryyy cheap
How does this fit with a zag shield?
Galaxy S3 Paranoid ROM.
I think that with the zagg shield you will be ok. The case has already a tight fit so its better not to use extra protection underneeth. I dont think you need zagf shield for the back cover because its already protected from the case.
ponyboy82 said:
Do you guys mean the material of the case degraded? This is all one-piece right? I was JUST shopping for my first bumper case and saw some aluminum ones that snap or screw together, but it seemed like the TPU ones are just a single piece of material and wrap around the edges.
Click to expand...
Click to collapse
If it is anything like the one for the Galaxy Nexus (and it appears to be the same), there is a hard plastic material used on the rear portions of the bumper, while the piece which surrounds the screen is flexible rubber. With the GN, the two materials separated.
is it easy to take it in and out of your pant pocket
denny_1986 said:
is it easy to take it in and out of your pant pocket
Click to expand...
Click to collapse
yes its very easy dont worry.
Do these work with any charging dock? I ordered one today but just wondering ...
...sent from Infinity
PaulQ602 said:
Do these work with any charging dock? I ordered one today but just wondering ...
...sent from Infinity
Click to expand...
Click to collapse
i dont know for sure, but i think that it is going to work because the case is thin on the bottom. :good:
Thanks for the review, I ended up buying the same one but in white. I'm guessing they come from china because this thing isn't going to arrive for like three weeks haha. Oh well whatever.
My clear diztronic tpu case is starting to turn yellow and blue from my jeans so I really need something else. For three bucks I hope it holds up for a little while.
Do you think the the bezel or screen would get damaged if I dropped it from pocket height and it hit the corner on cement? Just wondering if I should still be extra careful when using this bumper.
rlatjs17 said:
Do you think the the bezel or screen would get damaged if I dropped it from pocket height and it hit the corner on cement? Just wondering if I should still be extra careful when using this bumper.
Click to expand...
Click to collapse
if your phone hits a straight floor, then its protected. if ur phone hits the road it might be scratched. try to avoid the roads hahahaha :laugh:
dunderball said:
Thanks for the review, I ended up buying the same one but in white. I'm guessing they come from china because this thing isn't going to arrive for like three weeks haha. Oh well whatever.
My clear diztronic tpu case is starting to turn yellow and blue from my jeans so I really need something else. For three bucks I hope it holds up for a little while.
Click to expand...
Click to collapse
i got mine in less than 3 weeks becuase the seller shipped the case in an envelope (like a mail). for three bucks its a bargain.
I tried 2 gel cases the mini suit and amzers both found on Amazon.com
The mini suit doesn't have a gel feel, and lacks protection. Here's the link for mini suit..
http://www.amazon.com/s/ref=nb_sb_noss_1?url=search-alias=aps&field-keywords=Amzer+note+10.1
Amzers case has a very jelly feel, and is also much thicker. The price is well worth the extra grip and protection. Which is my favorite thing about the case. It helps you grip the enormous 10in display comfortably without fear of slippage.
http://www.amazon.com/Amzer-AMZ9466...id=1359557273&sr=8-1&keywords=Amzer+note+10.1
All in all if you want the cheapest case you can get to prevent back scratches go with mini suit. If you actually want a grippy protective gel case go with the Amzer. Both cases come in many colors, and at only $20 for the amzer, and $10 for the mini suit($5 shipping included) they are both a steal!
Please remember to thank post if you found it helpful!
Been thinking about getting amzer case, but have read a few reviews that say the silicon doesn't sit flush with the tablet. And that's, my one concern, tell us about it in y your opinion, and photos would be great thanks
Sent from my GT-N8010 using xda app-developers app
?
ckavvouras said:
Been thinking about getting amzer case, but have read a few reviews that say the silicon doesn't sit flush with the tablet. And that's, my one concern, tell us about it in y your opinion, and photos would be great thanks
Sent from my GT-N8010 using xda app-developers app
Click to expand...
Click to collapse
By flush you are referring to the way the speakers/headphone input are or aren't exposed?
Theway the rubber sits on the device or are there gaps on the bezel or around ports and or soeaker grills
Sent from my GT-N8010 using xda app-developers app
Photos not currently accessible...
ckavvouras said:
Theway the rubber sits on the device or are there gaps on the bezel or around ports and or soeaker grills
Sent from my GT-N8010 using xda app-developers app
Click to expand...
Click to collapse
Hey man, So I was about to post pics for you but my phone kinda crapped out. Sent it into samsung so it should be back in the next 2 weeks. I will try to borrow my GF's GS3 to take some pictures later.. Unfortunately I am using a basic Huawei Android ATT Go phone in the mean time. No flash ****ty 3MP camera wouldn't really show you what you want to see.
I will be honest though, my thoughts about the amzer case where exactly that it was an amazingly snug and good fit. All the speakers/mics/camera/everything is all flush.
I have the amzer. It is thick and heavy. Loads of protection though. It covers all the silver except for speaker grills. There is a YouTube clip I think.
The amzer is definitely thick and good on protection.
Good
agreed
smegatron said:
I have the amzer. It is thick and heavy. Loads of protection though. It covers all the silver except for speaker grills. There is a YouTube clip I think.
Click to expand...
Click to collapse
Agreed. Great case.:good:
Got one of those mini suits on the way to the crib, only $5 shipped on Ebay btw.
Itchiee said:
Got one of those mini suits on the way to the crib, only $5 shipped on Ebay btw.
Click to expand...
Click to collapse
Ebay? Then it wasn't on the way to the crib homeboy.
Ynt: Favorite Gel Case
Hmmmm
http://www.amazon.com/Fosmon-Soft-S...ywords=samsung+galaxy+note+10.1+silicone+case
I have the Amzer and it is OK, I use it for work because it is indestructable. Loose fitting but has all the right holes. I wish it has a solid back plate and was a bit snug.
Shagerty said:
Ebay? Then it wasn't on the way to the crib homeboy.
Click to expand...
Click to collapse
Uh, duh - he ordered one and "it" is on the way to his crib, homeboy.
Sent from my palm to your face
::facepalm::
Since it is silicon, have any of you found it to be a dust attractor? I've had that issue with nearly every silicon case I've tried.
Not a real dust attractor
lazer155 said:
Since it is silicon, have any of you found it to be a dust attractor? I've had that issue with nearly every silicon case I've tried.
Click to expand...
Click to collapse
Im not sure if your aware of the newer types of polymers used for gel cases nowadays. They are more dust resistent. In short I dont have a huge dust issue when using the amzer gel case. It stays fairly clean and if it attracts an occasional cat or dog hair theyre not statically glued to the case! Hope this helps!
I have the mini suit and it's great. Fits snugly and all the holes match up. I have a handmade leather case for my note and the mini suit is good to use when I'm walking around with it.