Related
Ok I searched on the forums hard for this one so forgive me if this has already been answered. I see to find people with Windows Mobile 6 and Windows XP or people with Windows Vista but Windows Mobile 5.
Since I'm running Vista, I use Windows Mobile Device Center instead of ActiveSync. The functionality of the program is fine, so I have no complaints. However, to upgrade ROMs or anything...I use an XP Machine as it seems Vista seems to think the device disconnects upon the loading of the bootloader. I've read somewhere in the forums that there is a driver update to fix that, but after applying...WMDC doesn't work properly...so I'd save the trouble and use a machine that has XP running instead until a better fix comes along.
My 8525 came stock with a program called Wireless Modem as of ROM 1.34.502.1 shipped, which seems to have been replaced by Internet Sharing.
The Wireless Modem application worked fine after setting up the modem with the Vista driver also found in the forums. I also tested the bluetooth connection and set that up to tether as well and it worked fine.
I finally decided to upgrade after days of reading and I tried to use the Wireless Modem feature. I noticed it wasn't there and tried to use Internet Sharing. The layouts are similar...but when I hook up the phone under USB, my computer doesn't even recognize it as a new device (modem) as I did uninstall the last driver.
When connected via Bluetooth, it recognized the device and installed the driver as Windows Mobile-based device support by default. Under services, only Active Sync is only available...as opposed to before when I had Dial-Up networking available. When I set up a PAN, the computer and device are connected together, however I do get the same problem as some others with a connection that is limited or local only. So the tethering is unsuccessful.
I recently upgraded my Cingular 8525 to WM6BE v1.2 (Cingular Edition)...which I can't seem to find in the threads anymore. I'm also running Radio 1.38.00.11...but I don't think that would affect anthing. I reverted back to my shipped ROM to check for alternate settings that might have helped...then I was going to revert back to WM6BE v1.2 Cingular...then I realized I accidently deleted that custom ROM and I couldn't find it anymore. I was stuck putting on the WM6BE v1.2 on the sticky thread after which forced me to reinstall the data settings/keyboard fix from the cab files. Haven't had problems with them but I did like that customized ROM for Cingular a little better considering I really like "clean" ROMs.
Anyway, I'm attempted to connect via MEdia Net AND Cingular GPRS settings provided by the Cingular Data Settings cab floating around the forums. It works fine it seems...it just seems like the problem is getting Vista to recognize the device as a modem, or at least having modem capabilities.
I guess thats as detailed as I can get right now. Hopefully someone can help now ^_^
You are right. I tried updating rom on Vista's Windows mobile Device and end up damaging my xda2i. The device displays "USB" when connected to cradle and "Serial v1. 01" when not. Do you have a solution apart from upgrading?
Solution on Vista
Hello Guys, I'm running vista too and I bothered 2 hours before getting it done.
So this is one of the "Step-By-Step Instruction Guides".
0. Extract the attached file into a directory of your choice
1. Disconnect your Device
2. Goto Settings > Connections and choose "USB To PC"
3. Uncheck the option there
4. Reconnect your Device
5. Goto your DeviceManager and search for "HTC USB Sync", double click it and choose Drivers
6. Click on the "Update Driver"-Button and choose search on the computer
7. Click "Choose a driver from list..."
8. Click the button to the right (Open from Media)
9. Choose any INF File from the extracted ones.
10. You're done, upgrade your ROM.
11. To Rollback drivers, use the "Automatic Update" instead of Manually selecting (it will choose the newest ones)
12. Recheck the option of step 2 unless you're planning to use the slow variant.
Have Phun and Good Luck
Have I understand right? With this tweak We will be able to applied ROM upgrades to our HERMES from windows VISTA?
Confirmed.
I did already update my ROM in this way.
Cheers,
soniX
EDIT:
Please use HardSPL or something equal to be sure the risk is at a minimum.
And I can not be held responsible for any damage to your Hermes or your Brain
But as I said, for me it worked perfectly, remember to Restore the new Drivers or the Mobile Device Center will not work.
Hmm I don't think you people understand what I was asking...
I already know about that method to update with Vista...I actually tried it yesterday and for some reason it didn't work so I just use an XP Machine for now...but I was just asking merely about TETHERING.
I already have the ROMs of my choice loaded on my device.
In simpler words: How do I go about tethering (Running Internet Sharing) when my computer does not recognize the device as a modem...through USB or Bluetooth.
I'm running WM6BE v1.2 and Windows Vista Ultimate.
Maybe its Wm6BE, but I have used all the other roms (xda live, des, lsvw) and all I do is plug in the usb, start internet sharing and it connects no problem. Have to start internet sharing before wmdc starts. Internet Sharing works great, better than wireless modem. I was not able to use the WM6be due to problems with sbp pocket plus. I am currently using XDA live .30 and Vista Ultimate.
Does the technique in the post above work??
Also once that procedure is carried out can rom updates and RUU programs be used exactly the same as on XP??
If anyone is available to do some screenshots for me for an updated GUIDE, please PM me (i dont use or have a copy of vista )
I enjoy the community so I think I'll do my best to contribute to it. When I get the chance, I'll try to make a guide with screenshots on using Windows Vista and loading WM6.
I'm going to try to switch to LVSW build with his new update today and I'll see how that works out.
I REALLY like the one custom build someone made (I forgot who) with the Cingular connection settings defaulted from the Cingular Shipped ROMs...I wish I can find those files again.
It seems like the people developing the new Cingular data connection cab files are really working hard at getting the default settings as if they just bought their phoes straight from Cingular.
I'll let you know how LVSW goes with Internet Sharing and Windows Vista
sonixwarrior said:
Hello Guys, I'm running vista too and I bothered 2 hours before getting it done.
So this is one of the "Step-By-Step Instruction Guides".
0. Extract the attached file into a directory of your choice
1. Disconnect your Device
2. Goto Settings > Connections and choose "USB To PC"
3. Uncheck the option there
4. Reconnect your Device
5. Goto your DeviceManager and search for "HTC USB Sync", double click it and choose Drivers
6. Click on the "Update Driver"-Button and choose search on the computer
7. Click "Choose a driver from list..."
8. Click the button to the right (Open from Media)
9. Choose any INF File from the extracted ones.
10. You're done, upgrade your ROM.
11. To Rollback drivers, use the "Automatic Update" instead of Manually selecting (it will choose the newest ones)
12. Recheck the option of step 2 unless you're planning to use the slow variant.
Have Phun and Good Luck
Click to expand...
Click to collapse
Also, I've seen this guide posted twice...yours missing one step where I was supposed to "End WMDC.exe Process in Task Manager"
I still can't get Vista to run RUU...do you run the RUU with your device in Bootloader? I think I even tried that once and and still couldn't get it to work with the older Driver.
Not exactly sure what I'm missing or doing wrong...but its definitely after I install the driver. It acts as if I didn't install it at all, even if I check in drive details and its all correct in there.
i tried the method above for upgrading in vista and it didnt work for me...
what am i missing?
Where is it stopping?
Because I did it once, it has to work.
Where is it stopping? - At the bootloader (LSD-Screen with psychedelic colors ?) - or before ?
I will do an upgrade in the afternoon again and this time i will record ALL of my steps.
Hopefully I'll find the recept for the cake.
Cheers,
soniX
Yea it gets to the bootloader screen and I'm stuck as if I never loaded the AS4.5 drivers.
Sorry, too less time today for a screenshot-decorated guide.
I just upgraded my device again (only to proove it does work).
So here is again a guide, which differs to the first one.
I guess there are two ways to do this...
Prequesites:
- Search my previous post and download the USBAS.zip-File
- Extract it into a directory...
- You'll need your device and it has to be connected, too
The first approach:
Change the Serial-Driver
- On the device click Start > Settings, choose "Connections" there and click on "USB to PC"
- uncheck the item for "Enhanced..." there
- Click on OK.
- Now goto your Device Manager.
- Search an Item named "HTC USB Sync".
- Right-click it and choose "Update Driver".
- Choose the second option, then select to choose manually
- Select the directory where the zip has been extracted to and choose any inf file.
Start the Update-Tool
- After the driver-update you need to set the device back to RNDIS-Mode (follow Step 1 and recheck the option)
- Verify that you're running the correct drivers for the RNDIS-Device, the date in the device-manager has to be around January, 17th 2007.
- Start the ROM-Upgrade.
- It should work now.
For me it did not really work to switch from RNDIS to USB-Serial drivers in my localized (thanks bepe for the great work!) german WM6.
So if you have a problem with the first method use this one.
- Start your Device-Manager, we have to be very fast.
- Start the ROM-Upgrade as you've probably done before
- If the bootloader starts up, you'll notice a device/dettached,device/attached sound, this is your sign, goto to you Device-Manager.
- Search for the Entry "HTC USB Sync".
- Update drivers like it's written above.
- If it won't work and the upgrade tool dies with "cannot connect", don't worry. Reset your device (soft) and try again, this time you should not need to update the drivers.
Cheers,
soniX
I'm using XP and a USB cable. USed to work OK before upgrading to WM6 Black but now I get Error 797 on the PC saying modem not found or busy!
mrvanx said:
Does the technique in the post above work??
Also once that procedure is carried out can rom updates and RUU programs be used exactly the same as on XP??
If anyone is available to do some screenshots for me for an updated GUIDE, please PM me (i dont use or have a copy of vista )
Click to expand...
Click to collapse
Take a look here
Code:
http://www.modaco.com/index.php?showtopic=252977
For Vista guide with screen shots, so far i've only flashed HardSPLv4 from inside Vista, but it worked i'm still plucking up enough courage to do a full flash of WM6
Nic
I do this (for Hard-SPL, don't know for other):
I have made what it was written on modaco (http://www.modaco.com/index.php?showtopic=252977), but
1) I was not in bootloader.
2) While active sync try to connect (but it does not succeed because they are not its driver) I've stopped WMDC.EXE and now hermes is connected.
3) NOW I do a flash.
If there is something that is not clear you say it to me.
My method also works (for me)
Can somebody confirm that my method works for vista?
soniX
I'm based also to your method, but it would be more complete to integrate it with the method on modaco.
It seems that most people didn't get the point of this thread...weird considering I put TETHERING in the subject line. However, it is nice to see people trying to help others with Vista to flash. I have the same problem myself but access to machines with XP nullify my real need for flashing on Vista for now.
I'm about to reinstall LVSW's latest ROM set for the billionth time and I'll try out tethering on that. It seems that people who were on WM6BE were having a hard time with Internet Sharing. I'll load a new rom and let you know how it goes.
im current problem is that when i open windows mobile device center it crashes and i can see my tytn , im currently not aving any outlook is that that the reason of the crash ??
i don't think lack of outlook is a problem, unless perhaps you have set wmdc to sync with outlook (reinstallation or adjustment of connection/sync settings will solve this)
make sure you have:
-unchecked advanced network functionality on your tytn (under settings/connections/usb to pc)
-make sure you have the latest version of wmdc
also try reinstallation of wmdc, soft-reset, pc restart
you should also read mrvanx's guide its really useful
here's a link to mrvanx's upgrade forums, you should choose 'configuring windows VISTA'
http://forum.xda-developers.com/showthread.php?t=299462
i had wmdc crashing on me whenever i connected my 8525 as well. windows data execution prevention was shutting it down.
i had to go into the windows registry & delete the existing partnership information before i could get it to work again.
Hi All, I have a Hermes with WM6 and have just installed Vista Ultimate and am not able to get my Hermes to Sync.
Vista claims it does not recognize the device . . . I have tried via USB & Bluetooth. Any ideas how I can resolve this?
Thanks in advance.
Same thing happen to me the first time what ROM did you use? I just use Fun key rom and everything works great.
Do you have Windows Mobile Device Center installed?
TaurusBullba said:
Do you have Windows Mobile Device Center installed?
Click to expand...
Click to collapse
Even I have wmc6.1 installed, my computer doesn't recognize my Hermes starting from build 1921, it opens it as a storage device only, but no syncing !!, downloading Starbase's ROM right now and will try...
Vista has issues with everything its a pile of *beep*
I am also having similar issues. I just got my new laptop that runs Windows Vista Business and I can get WMDC 6.1 to sync and see the device but it will not load my contacts and calendar onto the latop. Its becoming very frustrating and I'm not sure why it won't sync the data. I'm running the vp3g 3.62 rom on my phone.
Try this...
Click...
Start-> Settings -> Connections -> USB to PC
Uncheck the box "Enable advanced network functionality"
if it is already unchecked, then try checking it. That seemed to work for me when I had problems with WMDC.
Still the same results for me. My phone can connect to the computer... it just won't sync the data.
mercx said:
Still the same results for me. My phone can connect to the computer... it just won't sync the data.
Click to expand...
Click to collapse
+1
vista dont reconize ppc
it say unknow device.
Where we can find the drive?
exactly
festermania said:
+1
vista dont reconize ppc
it say unknow device.
Where we can find the drive?[/QUOTE
I have xda live rom & vista ultimate ... where can I get the driver?
Click to expand...
Click to collapse
Install Windows Mobile Device Center for Vista from Windows Download center. Then everything will work fine. It is my experience.
One thing that might help from my experience:
Take out the microSD card. I had some problems with it inside my phone - no sync. When I took it out everything worked fine! Then I formated my card and problem was solved... don't know what it was all about.
Last month i uninstalled the wmdc and then reinstalled it... i got the connection right but not always...
THen last week i had to reinstall windows and then when i did and update , i got an all new WMDC. This version works fine and good... No issues now...
I have the latest WMDC and have tried everything so far mentioned still and still no sync!?!
Very frustrating.
Any other ideas? Am I missing something really basic.
I have done something right!
After downloading WMDC finally the Jasjam was recognised however when trying to sync the following error occurs:
"Cannot connect with current connection settings. To check your connection settings, select Start, then Settings, then Connections."
So i went to that part of my phone but have no idea what I should be checking!
All help with this is much appreciated (if only things would just work )
hi
i use windows 7 on my pc
i install windows mobile device center but i can't connect my PPc to pc
what can i do
ta,ks
... go and get yourself a mac, running osx
(sorry, couldnt resist this)
greetz
I m using Windows 7 and able to connect to my PPC. Install the Windows Mobile Device Center and let the windows run windows Update. this will provide you with the latest windows mobile device center which will help 7 to connect to your PPC
kailashnj said:
I m using Windows 7 and able to connect to my PPC. Install the Windows Mobile Device Center and let the windows run windows Update. this will provide you with the latest windows mobile device center which will help 7 to connect to your PPC
Click to expand...
Click to collapse
yea... download windows mobile device central from microsoft website... it will work fine then..
he said in the first post he already installed that
3 replies and none of them helpful... oh dear
it's hard to help really becuase you havent given us mich info....what ROM are you running, how are you trying to connect....did it connect to the same PC before windows7 was put on there?
you might need to change the ADVANCED NETWORK seetings on your PPC
and check the connection seetings in WMDC, and check your firewall settings
problem solved
tanks for all i go to settings and connections and usb to pc
and i desacived the option: enable advanced networf functionality
tanks for replay
Sorry but could you be more specific on how you did that? I am facing the same problem. Thanks in advance
this part=> "and i desacived the option: enable advanced networf functionality"
first exuse for my bad english
ok i repeat the method
1-go to settings
2-go to connexions tab(its 3 tabersonnel,systeme and connections)
3-you find the icon named UDB to PC yoy click on this icon
4- you wille receive one page that indicate :active.......
5-you desactive this option
goog luck
well..ermmm... Thank you.
more info:-
1. on PPC; click Start-Settings-Connections-Usb to PC
2. Uncheck the "Enable advanced network funtionality'
This works for me.
rachid202446 said:
hi
i use windows 7 on my pc
i install windows mobile device center but i can't connect my PPc to pc
what can i do
ta,ks
Click to expand...
Click to collapse
Hey dude can u teell me from where did u get wm 7
Its not WM7, its Windows 7, the public beta of the operating system next in line after Vista. Its closed now unfortunately so you'll have to wait for Beta 2 or RC1.
On July 2, Samsung released WM 6.5 for the Epix / i907. It is available here:
http://www.samsung.com/us/consumer/mobile/mobile-phones/at-t-phones/SGH-I907ZKAATT/index.idx?pagetype=prd_detail&tab=support
Q: How do you get the Samsung official WM 6.5 upgrade for the Epix / i907 to work on Windows 7 64bit?
The trick is to get the drivers installed and then the Vista 32-bit installer works fine. You can get the drivers from:
http://downloadcenter.samsung.com/content/SW/200708/20070813082717640_Samsung_USB_Driver_Installer.exe.
Run this install program. It will put the drivers in Program Files (x86)/Samsung but installation won't work. Next open the device manager and then update the driver for each of the non-working devices... Select the Program Files (x86)/Samsung directory. Windows 7 will successfully find and install the drivers.
Note that you will also need to set the USB connection mode to "Modem". This is located in Settings / Connections / USB Connection Mode.
Q: Does HTC CM Internet WiFi Sharing work on the official Epix WM 6.5 release?
Yes. But to get it to work I also needed to install and RUN the Topaz CommManager. Start CommManager running and then start CM Internet Sharing. See this thread for details.
http://www.modaco.com/content/i9x0-omnia-http-omnia-modaco-com/290496/cm-wifi-internet-sharing/.
Note that the Topaz CommManager works but is not as clean as the default Wireless Manager. Also I installed the Application Unlocker from:
http://www.mysamsungepix.com/hacks-and-mods/application-unlockers/samsung-epix-application-unlocker/
But not sure this was necessary.
Q: How do you get rid of the Startup and Shutdown animations and noise.
The following works on the official update.
http://www.mysamsungepix.com/hacks-and-mods/other-hacks-and-mods/silent-startup-and-shutdown/
Q: Does this patch update the radio? Does this patch fix the ID1 GPS issue? How can I tell if the update was successful?
The patch updates the phone, radio, and fixes GPS issues with ID1.
To confirm a successful update type *#1234# into the phone. According to the Samsung FAQ both the PDA and Phone field should be 'pi907UCJD1'.
Some people are reporting an occasional hang during the update process and consequently the radio is not updating. Try it again.
Q: How is battery life?
So far battery life has proven to be as good if not better than the original rom.
Q: Is GPS working?
GPS works without issue with the latest versions of both Bing and Google maps.
Bing turn-by-turn voice-announced navigation is working great.
The latest versions of Google and Bing maps are available in the Marketplace.
Q: How can I configure the Today screen?
One easy way to do this is with the free "Home Screen Customizer" available in the marketplace. Works great.
Q: Can I reorganize the Start Menu?
You can use file explorer to navigate to \Windows\Start Menu. Then cut and paste. It looks like the shortcuts are no longer locked in ROM.
Seems to Work
Several people have asked how well the official Samsung WM 6.5 upgrade / patch is working...
My experience is very positive; no issues so far.
And it seems fast.
USB modem error
im trying to upgrade my epix with my windows xp, but im always having an error on failed to install usb modem, it says that there's already installed for the device. i tried installing and uninstalling it but the program always says that there's already installed for the device. anyone encounter this glitch?
USB modem
i guess my windows XP can't seem to locate my modem driver even if its installed already... am i right?
Updating Epix to Windows Mobile 6.5
jazua said:
i guess my windows XP can't seem to locate my modem driver even if its installed already... am i right?
Click to expand...
Click to collapse
you can try this. which is for win 7/vista
therealzam said:
I'm writing this response as I had a whole hell of a lotta trouble getting this to flash properly and ended up having to figure out some stuff for myself and here are my steps:
Assumptions = I am using Win 7 64bit, w/ windows mobile device center in normal setup, My windows is genuine which may be required to get the driver from Windows Update
1 = make sure phone is off with battery removed. I'd have the usb cable in so you can get it going as quick as possible.
2 = download and run an application called USDL Grand Prix (the vista version works on win7). You'll have 2 find the dl yourself unfortunately, but googling 'usdl grand prix vista' is your best bet.
3 = under select a profile, choose: Grand Prix LV Image
4 = hit the pda button &browse to the 'bin' format image you downloaded at the start of the thread
5 = review step 7 so you can be ready to do it in a timely manner!
6 = under 'grand prix's step 3, select detect
7 = place the battery back in the samsung and hold the vol up key, the ok key, and hte power key and wait for grand prix to start doing its thing and a green status bar to begin growing freakishly at the bottom of the 'samsung' screen.
8 = once the 'grand prix' says 'pda finished!!' in the status area, you are ready to remove and replace your battery then power on as normal!
YAY, how easy is that?
Click to expand...
Click to collapse
or this
Download the following files:
* Windows Mobile 6.5 build 23017 15MB page pool BIN (Mirror 1)
o Check the first post of this thread for newer BIN versions
o Microsoft contacted me and told me to take PDA6.5_15mbPP.bin of mysamsungepix.com
* USDL GrandPrix v1.6.4 (Windows XP/Vista/Win 7) (Mirror 1) (Mirror 2, XP) (Mirror 2, Vista)
1. Verify that your Samsung Epix can connect to your Windows computer via USB. You should be able to browse your Samsung Epix in My Computer > Mobile Device and/or make a successful connection via ActiveSync. If you cannot do this, the GrandPrix program most likely will not see your Epix.
2. Turn off your Samsung Epix, but it connected to your Windows computer via USB.
3. Start USDL GrandPrix (Windows 7 users run the Vista version)
4. Under “Select a profile” choose “GRANDPRIX LV image”
5. Click the “PDA” button and locate the Windows Mobile 6.5 BIN file.
6. Press the Detect button in USDL GrandPrix
7. Power on your Samsung Epix
8. Wait for the process to full complete (mine idled at “Writing Dummy CSC Header” so I moved to the next step and everything was fine).
9. Power off your Samsung Epix (may require a battery pull if your CSC Headers hang).
10. Power on your Samsung Epix.
11. The first “boot” of your Samsung Epix may take a while (up to 5 minutes) so don’t panic if your phone seems unresponsive at the orange Windows Mobile screen – be patient.
12. Complete the Windows Mobile 6.5 setup wizard and voila – Windows Mobile 6.5 on the Samsung Epix.
which is from this page where the author also has a youtube video you can watch:
http://www.mysamsungepix.com/category/windows-mobile-6-5/
official 6.5
Can someone please extract the .bin file on the official 6.5 update. cause the update is a .exe. i want to try grand prix on updating my epix with the official update. having trouble with the usb driver, installed or not the patch wont work
jazua said:
Can someone please extract the .bin file on the official 6.5 update. cause the update is a .exe. i want to try grand prix on updating my epix with the official update. having trouble with the usb driver, installed or not the patch wont work
Click to expand...
Click to collapse
check this out maybe
http://forum.xda-developers.com/showthread.php?t=681732
How to config GPS,
Com 1
Com 9
Rate 4800
Not work (Google Map)
thanks
thanks gistofit!
Quick Update
Q: How is battery life?
So far battery life has proven to be as good if not better than the original rom.
Q: Is GPS working?
GPS works without issue with the latest versions of both Bing and Google maps.
Bing turn-by-turn voice-announced navigation is working great.
The latest versions of Google and Bing maps are available in the Marketplace.
Q: How can I configure the Today screen?
One easy way to do this is with the free "Home Screen Customizer" available in the marketplace. Works great.
Q: Can I reorganize the Start Menu?
You can use file explorer to navigate to \Windows\Start Menu. Then cut and paste. It looks like the shortcuts are no longer locked in ROM.
I'm having trouble having Grand Prix or the offical updater recognize my phone. I'm using Windows 7 home premium 64bit. Anyone have a solution? Grand Prix responds but then my phone "disconnects" and nothing ends up happening.
NEVERMIND. Finally ended up getting it to work. Not sure how but after uninstalling and reinstalling the drivers many times it decided to finally flash.
5 column Start menu 320x320
i searched the other cooked wm6.5 threads and couldn't find any 5 column Start screen menus, so I uncabbed and modified the isangelous StartMenu cabs (link) for 320x320. I made 3 sets, the (5x4) looks best with EpixVGA:
Requirement:
1. These look best with EpixVGA or RealVGA installed, i prefer EpixVGA.
2. Remember, installing EpixVGA on WM6.5 will disable Internet Explorer 6. (but who needs PIE6 when there's Opera and Skyfire?) If you ever need PIE6 again, just uninstall EpixVGA and it'll work again.
Since the stock StartMenu file is in the rom, you cannot simply copy it to \Windows\ folder to make it stick, here's a simple instruction:
Instructions:
1. Unzip, Use Total Commander to Copy the StartMenu(5x4)_GridScene_320x320.cpr into your Epix's \windows\ folder.
2. Sort the Windows folder by filename, find the stock StartMenu_GridScene_320x320.cpr, and rename it by adding a few characters into the filename, for example StartMenuSTOCK_GridScene_320x320.cpr
3. Find the (5x4) file you just copied, and erase the "(5x4)" from the filename.
4. That's it. Confirm by simply Refreshing the screen, and you'll see the StartMenu_GridScene_320x320.cpr will have the new file date.
5. Soft reset.
these .cpr files are just .txt files, and you can open it and play with the values. If you're not using EpixVGA, just decrease the text size by 2 and the (5x4) will still look good. Request: can somebody re-CAB these 3 files again? or remind me which program/settings to use for the cab?
Thanks a lot for it, Atlaswing, great work!
Here are my screenshots of (6x4) and (5x4) configurations along with RealVGA (96dpi pack for build 28008) on fenrir's WM6.5.x 23668 with Robert Batman Blue skin.
EDIT: and btw... what exactly is EpixVGA? I've never heard of that. What are the differences between EpixVGA and RealVGA? trying to google something but with not much luck.
pojir said:
Thanks a lot for it, Atlaswing, great work!
Here are my screenshots of (6x4) and (5x4) configurations along with RealVGA (96dpi pack for build 28008) on fenrir's WM6.5.x 23668 with Robert Batman Blue skin.
EDIT: and btw... what exactly is EpixVGA? I've never heard of that. What are the differences between EpixVGA and RealVGA? trying to google something but with not much luck.
Click to expand...
Click to collapse
Its the same thing. Either one just changes the phone to 96dpi.
how come EpixVGA breaks PIE6 and RealVGA doesn't?
According to what I've found so far EpixVGA uses older 96dpi resource files which are not compatible with latest pocket IE.
When you switch from default to another theme and after switch to any of AT&T theme back, you getting wm 6.1 interface?
No option for sms delivery in sms application for default?
Is this joke or samsungs is so poor to complete update...
i907 wont power on
I initiated the update of the 6.5 patch... when it started the download of the eboot... the application crashed after probably 3-5 second that it started.
My phone was stuck on a black samsung screen. it wouldn't respond. I remove the battery and now the phone will not power on.
Remove battery and hold power button > no go
Use ac adapter > nothing
tried a hard reset (hold H key and power button) > same thing
It's a freaking brick... I'm so frustrated.. Samsung said to send it in but Im in Costa rica not US.
Anything else I can try ???
Does anyone knows how to turn off/on delivery report from options in new Epix sms/mms client?
Change Notification Settings
heineken78 said:
Does anyone knows how to turn off/on delivery report from options in new Epix sms/mms client?
Click to expand...
Click to collapse
isn't this all in the start menu/settings/sounds and notifications/event ?
or am i misunderstanding you?
you can select an event (ie Message: New Text Message) and decide if you want:
-play sound
-what sound to play
-repeat sound
-display message on screen
-flash light for...
-vibrate
i don't know if any of these options fall in the category of "delivery report" but this is what i thought of. hope its helpful.