Develop Bugs

Full screen picture

Does any body know where I can or can't find an App that makes the picture of the contact to apear on full screen when there is an incoming call?

Photo Contacts Pro might be what you are looking for...

S2U2 has an option with slide to answer and you can select the contact id to be full screen.
Give it a try.

S2U2 does that!

Another application that can do this is "Inesoft Phone".
You should really do some research before posting in the wrong thread This has nothing to do with ROM Development...

Inesoft Phone OR S2U2. Personally I use S2U2 because it's free.

Any way to review all messages in Message Tab?

hi Guys
I was wondering whether there is a way to review all messages in the Message Tab?
It shows the last message that was received and i have to finger scroll up and down to see all the messages. Moreover, it doesn't show me all the sent messages too, so trying to figure out what the message was related to has led to some confusing conversation.
Is there a way to show all the messages in the tab ? Tried looking for it on this search forum, but I wasn't able to find any, possibly due to the wrong keywords.
Thanks !

I'm assuming you mean in the TouchFlo 3D interface... It took me a while to stumble on this one myself (but it made sense thinking about the interface with other tabs), but you can go through the messages by dragging your finger up and down on the message on-screen. Dragging bottom-to-top goes backwards chronologically, and top-to-bottom goes forward.
Hope that helps.

thanks for the post.
Yeah i know that is how to go through the messages.
I was hoping i could see all messages displayed on the tab, instead of one message.
Is there a way to do this ?

I don't think that's possible, but you can tab on the message to open up the TF3D interface to view the conversation thread with the recipient, or click on All Messages (left softkey menu) to open the Windows Mobile interface to see the list of messages with various recipients.

Thanks for the reply.
That kinda is inconvenient. i would like to see all the new messages from different people, and i had already missed a few messages without thinking of going through the All Messages tab.
Wished there was a way to see all incoming new messages from different people at least.

Seeing as how it's still WM 6.1, I figured I'd just reuse all the old programs from my Wing. So I reinstalled the 750v palm threaded SMS program (which overwrites the current messaging app) and all was good in the world. Well, only somewhat...
Unfortunately, MMS no longer works which is really weird because it worked perfectly fine on my Wing. Now when I try to send a MMS, I keep getting the "Out of Memory" error. Oddly enough, I never got that error on the Wing... and it had a fraction of the memory compared to this beast.
Hopefully when 6.5 comes out, this can be resolved (or a program that automatically marks all your SMS's as read). Until then, the only solution I have been able to find has already been mentioned... and that's to manually swipe through each message. Sucks if you're a big texter since you can easily rack up tens (if not hundreds) of messages in a short period of time.

Thanks for the reply.
Unfortunately, i am a huge texter and i am loving the TP2. I could practically write an essay on it, and i won't feel like it is bogging me down.
Hence why i had "ignored" so many messages lol

With my Vodafone brnaded Touch Pro2 the left soft key is programmed to show "all messages" guess this is what you want but not sure how they managed it, I presume it is a reg edit. Maybe someone else knows which one.
Cheers
Barney

This is an interesting thread, as it highlights the design vs. functionality features of TF3D. As the author of this thread, me too would like to be able to see more than one message on the SMS tab and also have the option to have the reply go to the standard WM6.1 windows instead of the TF3D reply.

improwise said:
...and also have the option to have the reply go to the standard WM6.1 windows instead of the TF3D reply.
Click to expand...
Click to collapse
You can already do this... kind of. When you go to the SMS tab, click left softkey for "All Messages." This will take you to the default SMS program you have on your phone (in my case, it will launch the Palm Threaded SMS). From here you can reply to any messages you have received. It takes a little longer to reply because you have to open the default SMS program then click the thread you want to reply to. Either way, it works.
Hope this helps!

Yeah I do heavy texting and emails but the touch flow 2d is really crappy. You can't even copy and paste!
I know I shouldn't say it but just simple think like the the safari web browser, sms messaging and big onscreen keypad is being missed on my iphone.

Maric said:
Yeah I do heavy texting and emails but the touch flow 2d is really crappy. You can't even copy and paste!
I know I shouldn't say it but just simple think like the the safari web browser, sms messaging and big onscreen keypad is being missed on my iphone.
Click to expand...
Click to collapse
You can't copy and paste in the TP2 text program? Something I do every day on my Mogul? Geez, I really want this phone when it comes to Sprint, but that doesn't sound to good

TheBundo said:
You can't copy and paste in the TP2 text program? Something I do every day on my Mogul? Geez, I really want this phone when it comes to Sprint, but that doesn't sound to good
Click to expand...
Click to collapse
Yeah it SMS on touchflo sucks bad. I am little weary with my purchase so far since I don't know I've run into a lot these little disappointments.
I guess I was spoiled by the iphone simple and clean interface. Even the dialpad seems kind of small and awkward to use. I am just hoping for some hardspl mods so I can see if this device can still woo me.

You CAN copy & paste from any SMS. Just open the message, or scroll down (if in threaded mode) to the item you want to copy, tap MENU, check SELECT TEXT, highlight the text, tap & hold then select copy.
It's 1 more step than before when I can simply highlight the text or number directly without having to tap menu. I guess the new TouchFlo 3D will have problems guessing if we want to highlight some text or scroll left/right when we slide our fingers across.

Putra said:
You CAN copy & paste from any SMS. Just open the message, or scroll down (if in threaded mode) to the item you want to copy, tap MENU, check SELECT TEXT, highlight the text, tap & hold then select copy.
It's 1 more step than before when I can simply highlight the text or number directly without having to tap menu. I guess the new TouchFlo 3D will have problems guessing if we want to highlight some text or scroll left/right when we slide our fingers across.
Click to expand...
Click to collapse
When you said threaded mode, i am assuming you meant the Windows Mobile SMS app right ?
This is to clarify that the TF3D doesn't have the select text->cut and paste functionality but the Windows Mobile app does. You need to click on the left soft key "All messages" to bring up the Windows Mobile SMS screen, select the conversation, and you can then use Putra's instructions for text selection, copy and paste functionality.

Yes, in TF3D (or manila 2d), you can only read 1 sms at a time and limited to reply, forward & delete.
If you want to copy & paste, you need to open the Win Mob SMS application as outlined by btong1978

Anyway to fix this dual texting crap?

Delete.

One's man burden is another man's blessing!
Most folks seem to hate the threaded SMS which you like, for reasons including that you get such a tiny little area to see what you've typed, plus you don't have the option of adding other recipients.
I'm not trying to get into a debate about it .. just hoping to point out that there is more than one solution to your problem of "dual texting crap": I haven't seen any tweaks to embrace the nice new interface, but here is one for killing it and sticking with the tried and tested 30 year old way ..
http://forum.xda-developers.com/showthread.php?t=373681
BTW .. a bonus is that once you have applied this, you can easily change your mind later and simply go and toggle the value between 0 and 1 without rebooting the device
Hope this helps

I have to agree with vin5cent0, I bl**dy hate the WM SMS reply interface. It's _so_ ugly. I don't care for threaded SMS's though.
Maybe you'd like Vito SMS-Chat, vin5cent0?

I prefer the TF3d threaded interface over the windows mobile interface as well. However it only appears accessable by replying to a message on the messaging tab in TF3d. Any new message or other way of replying to a message brings up the older WM interface. I would like be able to use the TF3d threaded interface for all the ways you can send a text.

This is the first i've seen someone wanting to actually embrace the TF3d message interface. It's woefully inferior to the WM one for the following reasons:
1.) Lack of character counter for sending message
2.) No support for signatures
3.) Phone numbers aren't clickable
4.) URL's aren't clickable
5.) Stupid Soft Key for Sent isn't the same as WM messaging program and is back (without confirmation) instead of send resulting in lost messages
6.) Reply to: screen / threaded view TERRIBLY SLOW when you have a lot of messages - we're talking 10 seconds pauses sometimes when pulling it up or replying (I imported all my SMS from my old phone so I have 9k text messages currently...)
I'll take functionally over "prettiness" any day. If they can fix these issues, I'd use it again I suppose. For now I'm using the "zoom sms" hack to disable the TF3d reply to interface and it goes to the WM instead.

Multi Slider Incoming Call Screen (MSICS for short)

Multi Slider Incoming Call Screen (MSICS for short)
MSICS comes with three sliders instead of one.
The bottom slider is the usual one. No need to elaborate on that one.
The middle slider is the one I have been missing, is allows you to answer with the speaker on in one slide. (Instead of three actions in the original dialer: slide to answer slide down that black thing and pressing on the speaker icon.)
The top slider is the real interesting one it allows you to ignore the incoming call and send the caller a SMS massage with a predefined text (slide right).
Slide left on the top slider to send your location (as Google Maps link) to the caller.
This option is a very convenient way to reply to calls that usually say: "you're late! Where are you?".
MSICS is an idea for an incoming call screen. I need someone to create it.
The picture was made with Photoshop, this is not real (YET!)
If you want to help making MSICS real, please contact me.

Gr8 idea!!!
This would be very useful! Simple and brilliant idea!
The "preview" is fine too..
I wish I would be such kind of application developer that I could implement this through coding (not through PS )
Summa summarum, you've got +1 vote from me...
Hope that somebody with enough coding/HD2/Sense experience would take care about this project.

Szior said:
This would be very useful! Simple and brilliant idea!
The "preview" is fine too..
I wish I would be such kind of application developer that I could implement this through coding (not through PS )
Summa summarum, you've got +1 vote from me...
Hope that somebody with enough coding/HD2/Sense experience would take care about this project.
Click to expand...
Click to collapse
thanks Szior, looks like your the only one liking this one...

I liked too, but I think that, only the ones that can help making this should answer, otherwise you'll receive dozens of replys saying "I would love to have this...", " I need this...", " I want this..." and in the end you'll get no positive answer.
Let's wait that someone can make this.
Ciao.
Jo

Up, up, up!

2 words.
inesoft phone 5/6

+1, great modification!
Very useful

inesoft phone capabilities
baam2k said:
2 words.
inesoft phone 5/6
Click to expand...
Click to collapse
I can't find where inesoft phone does some of this. Can you point us in the right direction with a link showing it.

overkill
Seems like overkill. Mute is already an easy option with the volume buttons, speaker is only 1 tap after answering, S2U2 offers an sms option which is just 1 tap after ignoring.
I do like the map option. I would suggest hopping over to S2U2 and suggesting it to AC. The S2U2 option pops up the choice of sending an sms or not after you slide to ignore and I would think it could easily be changed from 2 buttons to 3 buttons adding a send map button in addition to the send sms and cancel buttons.
The question is how hard is it to incorporate finding your gps location, mapping it and sending that map when you do hit that new button. I'm sure it can be done, but how much work will it be and is anyone willing to do it. Adding it to an existing similar app already in use rather than yet another new app eating up more memory makes more sense to me. Just my opinion.

One person thinks of an idea... shares it...and another idea is born.
What about a 4 way slider in the shape of a cross instead? Each direction could have a separate action associated with it:
Push UP: Answer call and start speaker phone
Push LEFT: Answer call in phone
Push RIGHT: Reject call
PUSH DOWN: Reject call and send SMS message.

gr8 idea
its look like gr8 idea, so hope someone clever will make it

ya this looks awesome. will be awaiting this mod

Up
Please UP....up

Great idea. I'm in !

For a while, when reading, I was hoping it was indeed real.
I have no skills to implement on the WM side, yet I think the top slider is on you'd want to potentially disable/make harder to activate, if you do slide on the wrong one among the lower two everything is alright anyway, if you slide by mistake on the top one it could have bad effects

shkedi said:
Multi Slider Incoming Call Screen (MSICS for short)
MSICS comes with three sliders instead of one.
The bottom slider is the usual one. No need to elaborate on that one.
The middle slider is the one I have been missing, is allows you to answer with the speaker on in one slide. (Instead of three actions in the original dialer: slide to answer slide down that black thing and pressing on the speaker icon.)
The top slider is the real interesting one it allows you to ignore the incoming call and send the caller a SMS massage with a predefined text (slide right).
Slide left on the top slider to send your location (as Google Maps link) to the caller.
This option is a very convenient way to reply to calls that usually say: "you're late! Where are you?".
MSICS is an idea for an incoming call screen. I need someone to create it.
The picture was made with Photoshop, this is not real (YET!)
If you want to help making MSICS real, please contact me.
Click to expand...
Click to collapse
It's going to be very handy if you manage to develop it man

i would love that, too.
it would be better if it were real~~~~

wow nice idea, and pretty useful too

krowdrah said:
One person thinks of an idea... shares it...and another idea is born.
What about a 4 way slider in the shape of a cross instead? Each direction could have a separate action associated with it:
Push UP: Answer call and start speaker phone
Push LEFT: Answer call in phone
Push RIGHT: Reject call
PUSH DOWN: Reject call and send SMS message.
Click to expand...
Click to collapse
This would be awesome!!

u guys are making me lazy now.... ha ha
nice idea bro! keep it up

Incoming SMS notification with contact's picture?

Hey People, I'm looking for any software or a tweak which can display a notification on the screen with the contacts picture and a little-bit of the text on the screen. Any Ideas?

Well, I am starting development on a program that is a remake of SMSBubbles ... for Non-TouchScreen phones [only / mainly]. That will have that ability.

Hey
Well, SMS bubbles only previews the sms right? It doesnt show the picture, does it?

Or anyone who can find a keygen or cracked
SmartPhone Popups
http://www.clickapps.com/moreinfo.htm?pid=18023

Pirating and anything along those lines is prohibited on the forums...
My re-make of SMSBubbles would add the feature of displaying the contact's picture Now if I can only find the time to do actually work on it

TH3KiD said:
Or anyone who can find a keygen or cracked
SmartPhone Popups
Click to expand...
Click to collapse
The information you need is here...http://forum.xda-developers.com/announcement.php?a=81
WB