Develop Bugs

what can i do for my xda 2? please help me.please guys.

i was installing new rom on my device.when it was 12%, the computer got locked and i had to reset.Now,my baby did not reflash again.i tried again but himaupragadeutility gave : communication problem. what can i do now? can anyone help me? so a few people know this device, the others even do not know what pda is. what i can do?????????????????????????????

keep on doing a hard reset until you reach bootloader mode. from there try upgrading again. were you upgrading to 2003se or wm2005?

i was installing the rom from 02 web site
i was installing the rom from the 02 web site.i had tried but it did not open boatloader.what i can i do?

anything showing on your xda screen? if it's blank then you have to continue doing hard resets. a buddy of mine had the same problem and he was able to bring it back to bootloader mode after 10 or so hard resets.
if something is showing on the screen (like "usb version...something") then this is already bootloader mode. what you do is put the xda back on the cradle but don't expect activesync to recognize it. just put it back on the cradle and then rerun the upgrade.
hope it works.
rob

there is only o2 logo on the device,i tried hard reset but it did not open boatloader

Yes - another XDA IIs stuck in bootloader

Please, please help... During an O2 rom upgrade my xda IIs suddenly rebooted and now it is stuck in bootloader mode. I have worked out there is no rom left in the phone.
I have tried evrything I could search for in the forums but I get the dreaded error 101 whenever I try to re run the o2 upgrade. It seems the xda won't connect to anything.
ANY suggestions would be appreciated

Read Wiki
Especially for the No Operator Updade files, that might hepl you.

ok then...wish me luck

o2 xda executive rom update gone awry

hi hope someone can help me.i tried updati ng my xda exec after downloading the rom update from o2, and now my pc doesnt recognise the xda and my xda doesnt start its gone completely bank.i tried holding the softkeys and pressing the reset button, it says hit 0 to get back to factory settings and nothing happens........please it looks like my phones gone comatose

Moved to Uni Upgrade forum form Upgrade general

i believe u r stuck in bootloader
hi
try the following
disable usb connection from connection settings in active sync
then re upgrade the rom , and when you reach the screen where it tells u the rom version (it wont tell u this time) u ll HAVE to wait for few seconds before pressing "upgrade" , hopefully it will work this time
good luck

hi
hi there, i tried upgrading my 02 xda executive from the software update on O2 website.my active sync 4.1 stopped working in midst and my xda is nt working now.and my pc isnt recognising the xda. the xda isnt starting up its completely dead.I tried hitting the 2 softkeys and the soft reset button and the screen lights up and it says to rollback to factory setting hit 0 zero, but nothing happens................plz help would be appreciated.http://www.my-xda.com/xdaExecSoftware.jsp
also the screen now has USB and v1.00 over it and shows nothing but this and not starting up and my pc pops a message up saying that an unknown usb device and cant be connected

Does anybody have a solution to the above problem as I now have 2 xda execs in the same situation. It's a bloody nightmare! I understand it's in bootloader mode. Just don't know how to get the xda up and running again without sending it off to O2...
Please help!

LOOK HERE I have been in this situation myself a couple of times. Personally I use method 2 which is at the bottom of the page as it's very easy to follow. I suggest you try this method first.
Regards,
Psi

Those of you having trouble after a Rom Flash. If it goes wrong, start by pressing THE BACKLIGHT BUTTON, THE POWER BUTTON AND PRESS IN TO THE SOFT RESET HOLE ALL at the same time. This should put you back into BOOTLOADER. Then try your rom flash again. If the WM6 fails I re-flashed with the O2 EXEC WM5 first. Forget Active Synch saying it cant etc.
Providing you can just see some very faint words then you are back in bootloader. I have got the original O2 XDA EXEC WM5 Rom files so if you want them, as I can not find out how to put a large zip file on here then I can email it to you. Let me know on
[email protected]

pls i need it send to [email protected]

Please help my JasJar is dead

I tried to flash WM 6.1
and then Give me Error and now i have a black screen
any one can help me please!!!!

this would help
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
best of luck..

i tried all of that but not working

What error is it ?

i treid to upgrade to windows 6.1 , while i'm updating gives me error and i tried to restart my mobile but nothing at all even i can not access the bootloader

Is your computer recognizin' your PDA. What happens when you connect it to the USB port ? Also, try after removin' SIM and the SD.
P.S: And you still need to tell me, what error msgs do ya get ?

my computer does not recognize my jasjar
I am so sorry what i remeber it was error code 101 , do you know i think the version that i tried to upgrade was not to universal
that's why this probelme happend.

I presume that you are tryin' to install the ROM designed for Universal
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial
try this, or search xda-developers usin' google, you may find the solution.
Error code 101 is actually connection error.

hey, are you usin' Windows Vista

no XP SP2 , but as i told you i think i installed rom not for universal

also my screen is dead nothing at all only black no serial or usb on the screen

aahmed12 said:
no XP SP2 , but as i told you i think i installed rom not for universal
Click to expand...
Click to collapse
Oh man,
you have screwed up your phone big time. Post a thread in General Discussion> Upgrading, Modifying and Unlocking. Someone there might b able to help you out on this.
All the best.

i have a similar problem, but it just stucks on 7% of flash and then gives me an Error 112, i think it is the rom, and maybe it can be fixed with an eeprom flash or not? if it can be, can anyone give a how to do it?

Isaygarcia said:
i have a similar problem, but it just stucks on 7% of flash and then gives me an Error 112, i think it is the rom, and maybe it can be fixed with an eeprom flash or not? if it can be, can anyone give a how to do it?
Click to expand...
Click to collapse
hey bro, error 112 actually denotes ROM update error.
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
follow Method 2 , if it doesn't work, then follow Method 1, mtty may prove useful in this situation.
Good Luck..

thanks !
i havent tried the method 2.. but method 1 doesnt seem to work..
many thanx..

ok that methods doesnt work.. im stucked not in bootloader... i can exit bootloader but the system doesnt start... when i press the reset button it just keeps white screen (w/o backlit) and nothing happens.. if i connect the phone in that state just unrecognizes it and if i press the light and power buttons (without resset) it starts the bootloader.. its not reading the rom

every time that i try to flash a rom on it just fails, and it gets the error 112, on every 7%... how can i fix it?

Oops! I omitted the quote

aahmed12 said:
my computer does not recognize my jasjar
I am so sorry what i remeber it was error code 101 , do you know i think the version that i tried to upgrade was not to universal
that's why this probelme happend.
Click to expand...
Click to collapse
I have the same problem. I mistakenly flashed the wm6.1 rom meant for BA. I dont think there is any remedy for this problem because the unit is not coming on and so cannot enter bootloader. The only sign of life is the red led which means the unit is not seeing the power supply ie it does not recognise that a battery is instaaled. No one has ever come up with a solution. The unit is bricked fullstop. I am already bidding on another unit on ebay.

i did chat with imate support and they advice me to go to any service center and they will fix it.
i tried many kind of solutions but it does not work so my last choise is to send it to imate service center.

[Q] [Help][HTC TD P3700] Error 262

I am trying to flash my PDA with a new ROM, While working with HardSPL everything gonna alright, But during updating Radio or ROM i got a message Error with [ Error 262] unable to communicate, please help me
Error screen short attached

Try to flash when the phone is in bootloader mode
To enable bootloader mode hold volume down when the phone is off
or soft reset then hold volume down,you will see a tri-colour screen,that's normal
then connect to the pc and flash,this should solve

Hi, get the same Error.
Using the O2 XDA Diam300 HTC Touch Diamond Handy.
If got 20 (!) rom´s, no one runs on my Handy.
Anyone a idea?

xburnsidex said:
Hi, get the same Error.
Using the O2 XDA Diam300 HTC Touch Diamond Handy.
If got 20 (!) rom´s, no one runs on my Handy.
Anyone a idea?
Click to expand...
Click to collapse
you got HSPL installed, right?

How can watch it, if i got HSPL?
Okay... must install with mtty...
k
****
i´ve got a Brick... damn
how can i start the Ruu in the "tri-color" mode?
I think the RUU need the Active Sync..

Help...........

Problem resolved!
I've not any idea what happened but now i am able to flash my phone with any ROM. If i am not going wrong i think my phone was security restricted to install third party ROM, just HSPL with again and my problem resolved. Thank for support.

hold volume down and softreset! then with usb cable connected run the ruu file