Develop Bugs

Exchange SP2 Push Mail Providers

Hi all,
Just upgrading to new Imate ROM. Now it seems that Universal has push email can anyone recommend an Exchange SP2 direct push email provider for consumer market? Many thanks for taking the time to read.
Tom C (UK) :lol:

The onlyone I know for the moment is 4smartphone.net - if you find any better (means cheaper), let me know!

Some report are saying 4smartphone.net takes 30 seconds to push an email to your device, rather than 5 seconds or less that others are getting via their own exchange servers.
Its worth asking these website exchange account providers what frequency they run the push 'heartbeat' at - you might end up with a big bill if they haven't set the Exchange/firewall to a reasonable rate.

Device SMS Address
I've just signed up for the 4smartphone trial, but Orange are completely unable to tell me what the Device SMS Address should be. They don't have a clue what this is about. I was guessing [email protected], but that doesn't work.
Does anyone know what it should be?

Re: Device SMS Address
rossp said:
I've just signed up for the 4smartphone trial, but Orange are completely unable to tell me what the Device SMS Address should be. They don't have a clue what this is about. I was guessing [email protected], but that doesn't work.
Does anyone know what it should be?
Click to expand...
Click to collapse
If you're using the aku2 rom then you don't need an sms address. The MSFP/Direct Push works via http not sms. Waaaaaay better!

Settings
I think it is that version. I'm using the new ROM version 1.30.68 with Radio version 1.09.00. I can see the push mail icon in Comm Manager, but it's greyed out, so I'm not sure where to go from here. The 4smartphone support pages are not exactly informative.
Can anyone point me to a website about setting this up? My searches are not getting me far.
Thanks.

Re: Device SMS Address
jdee246 said:
rossp said:
I've just signed up for the 4smartphone trial, but Orange are completely unable to tell me what the Device SMS Address should be. They don't have a clue what this is about. I was guessing [email protected], but that doesn't work.
Does anyone know what it should be?
Click to expand...
Click to collapse
If you're using the aku2 rom then you don't need an sms address. The MSFP/Direct Push works via http not sms. Waaaaaay better!
Click to expand...
Click to collapse
Is the AKU2 ROM available?
Where?
Thanks
Steve

Its a test aku2 universal rom...
http://forum.xda-developers.com/viewtopic.php?t=42743

Got it working
Just need to ignore the instructions on the 4smartphone web page about SMS Device.
From the moment of clicking send on my Desktop to the email arriving in my device inbox the time taken is about 25 secs, which includes gmail forwarding it to the 4smartphone address.

4smartPhone Help!!
Glad to hear that you got the SMS problem sorted which help me out too. I can now sync with contacts but what do I do for the email. Do I have to set an account up on WM5 which I have done but there is no push coming through I have to manually send and receive. Any help much welcome. Thanks

You need to set it up using active sync in WM5. You will need to add a server (secure.4smartphone.net) then your username, password and domain (4smartphone). It will then sync using the GPRS connection.
I've got Outlook desktop, Outlook Web Access (with smartphone) and Outlook on WM5 all synchronizing nicely. My only problem is that I have three pop email account on Outlook desktop, but 4smartphone only seems to work with one.

And just to add the obvious, you need to have email being forward to the address that you got @smartphone.com

Re: Device SMS Address
rossp said:
I've just signed up for the 4smartphone trial, but Orange are completely unable to tell me what the Device SMS Address should be. They don't have a clue what this is about. I was guessing [email protected], but that doesn't work.
Does anyone know what it should be?
Click to expand...
Click to collapse
4Smartphone.net are US based, where email to SMS is very common. It took the Americans about three years to wake up to the fact that everyone else in the world has to pay for SMS messages to be sent - hence the new push technology from Microsoft.
What they are referring to is a feature known as AUTD (always up to date) which is how Exchange used to do push. A specially created SMS text message would be sent to your phone which told your device that something had changed, and it would then do a sync.
I am told that it worked very well - it is just unfortunate that for everyone outside of the USA the feature would cost many thousands to run for each single user.
Simon.

4smartPhone Help!!
Thanks for your quick reply. I have forwarding set up and all the correct settings for Active Syn in WM5, UserName, Password, Domain and Save password. Under the Options in ActiveSync there now appears and Exchange Server with the following selected Contacts, Calendar, E-Mail, Tasks.
I'm still not sure though what to do with the email all the above are syncing via 3g. In the Messages section do I have to create a new account and if so what are the correct setting for this?
Thanks again for the help and suggestions.
Tom C.

When it syncs with the Exchange server it automatically goes into the Outlook email inbox on your device. If you've previously been synchronizing with the desktop it wipes out those emails, which is why I'm trying the Pro version of 4smartphone and synchronising all three.
Have you checked if test emails you are sending are reaching the 4smartphone email address? You can do that by logging into the web version of Outlook via the link on their website.
Also the push email icon in Com Manager should now be working and it will say Microsoft DirectPush at the top.
That may not be much help, but I am also completely new to this.

4smartPhone
Once again thanks for the help. Just about got it sorted as I read your reply. The missing link for me is that the you don't have to sent up a seperate email account I was looking for server addresses extra but all those go under ActiveSync. Getting mails fine now but not too sure yet about sending them. Are yours sending fine or is there a delay?
Thanks again, you are still once step ahead of me

I've got Push email working with mail2web.com and have a few questions:
I've gota couple of email addresses that won't forward to my mail2web email account and I don't really want to use mail2web's harvester as that only checks once every hour, so I was wondering whether it's possible to set Outlook on my PC to synce with my mail2web account so that my PC will download emails from my POP accounts, then upload them to my mail2web server, which then pushes the emails to my phone?
Or is there a simpler way to do it?
Also, when I reply to an email that's been pushed the reply address is always my mail2web email address, which is a pain as it confuses people and gets rejected by my email groups. How can I change the default address that my replies go from, or even just change them on each email as I reply?
I'm sure I'll have more questions soon.! Cheers.

paulrockliffe said:
Or is there a simpler way to do it?
Also, when I reply to an email that's been pushed the reply address is always my mail2web email address, which is a pain as it confuses people and gets rejected by my email groups. How can I change the default address that my replies go from, or even just change them on each email as I reply?
Click to expand...
Click to collapse
Yup, use 4smartphones.net.
IT'S FOUR QUID A MONTH!

HI
i m using tmobie mda (usa) with the data plan and with the i can configure my pop3 email account on my phone and make to get the emails automaticaly after certain time
so then why do we need exchange server for
i mean i can be wrong too but if i m wrong can someone tell me the right thing
Thanks

I recommend Mail2Web, the simple setting and most important it is FREE.

Timeout-Messages cannot be downloaded to your mobile device

I have a couple of POP3 accounts on my O2 XDAIIs. I used to be able to download my email from ISP without problems.
Lately, when there is any email waiting, it will connect and try to download and pop up the following message "Messages cannot be downloaded to your mobile device. Make sure you are connected and that your e-mail account settings are correct. Then, try to download messages again."
The other POP3 accounts work fine, even with the same ISP, and this POP3 account used to work when I first got the unit. The POP3 account in question works fine from my Treo using the same SIM card (I have Cingular).
I searched all over the web and forums, I see many have the problem and some have not been able to resolve it. I tried:
1) Soft and Hard Reset
2) Deleting and reentering the account
3) Used the Sprite Mail cleanup utility (which basically cleans all emails and attachments)
4) Tried a registry key that had worked for some: HKEY_LOCAL_MACHINE\Software\Microsoft\Inbox, create new DWORD ForceOffSSL and give it a value of 1.
5) Checked with my ISP – they could not see any problem with the account and works with anything else but my O2 XDA IIs.
6) I tried the Flemail 2006 program (formerly WebIS) and it worled for email. But the program is so buggy and slow that I had to delete it. This tells me the problem is with the native pocket outlook.
If there is NO email, it will connect, check and disconnect with no error.
There is a timeout somewhere. The other accounts can connect and download without problems.
Has anybody else had this problem and does anybody have any suggestions?
:evil:

No one else has had this problem? Any suggestions?
I know it is device specific as it works on the same GSM account on a Treo.

PPC6700 with same problem
I just purchased the PPC 6700 and I love the device itself, but I have had many problems with it after owning it for only 4 days.
1. Sprint failed to let me know that my phone had to be updated. Thanks! I only found out about this update after 1 hour of phone tech support trying to find out why my phone randomly went into flight mode. What a pain in the ***.
2. I have my own servers and cannot download my mail from them or my home isp. Sprint by the way repeatedly told me this must be an issue with you server. I told him after being on the phone for 3 hours (I could tell he wasn't happy) "You must be right! Microsoft has always developed software much more then anything ever put out in the Unix world".
So the only help I guess I can offer to you is "Yes, I have the same problem with the native outlook that comes with WM5.0

likegadgets said:
No one else has had this problem? Any suggestions?
I know it is device specific as it works on the same GSM account on a Treo.
Click to expand...
Click to collapse
Whenever I see this (and I see it a alot) on mt XDA IIs, I just select Accounts|Clear <account>
If it doesnt work immediately then I restart the Outlook Inbox app and/or disconnect/reconnect.
Been through searching registry/deleting this & that database file / re/installing accounts. Havent had to do that for ages.
I access 5-6 pop accounts from various servers, several are my wife's. My bet is that it has something to do with whether the current status of the emails downloaded in your device matches the server etc - due to the function that you can delete the emails from the server by downloading, deleting and then deleting from the 'deleted items' folder and re-sycning
HTH

ME TOO! Any resolution??
I am having the SAME EXACT PROBLEM with my new 6700...did you ever find a resolution?
THanks,

I am having the same problem on a Hermes / TyTN.
My first TyTN was fine. I have 3 email accounts. 1 uses SSL and the other 2 don't. There were no problems using either account.
Having replaced my 1st TyTN with a new one (due to poor wifi on first device) I now get the message 'Messages cannot be downloaded to your mobile device. Make sure you are connected and that your e-mail account settings are correct. Then, try to download messages again'.
The only solution is to use the ForceOffSSL setting for my 2 none-SSL POP3 accounts. Then I have to reboot the TyTN without the ForceOffSSL settings to use my SSL POP3 account.
Continually changing the ForceOffSSL setting and rebooting is annoying, so for the time being I'm using nPOP email client for my non-SSL accounts.

getting an email timed out on cingular 8525
I am getting the same message 'Messages cannot be downloaded to your mobile device. Make sure you are connected and that your e-mail account settings are correct. Then, try to download messages again'. I am having the same problem intermittently with Htc Tytn with a pop account yahoo. I seem to connect without a problem on the internet but i do get this error intermittently. any solution?

Same here ... cannot send mail via OptOnline Account
--------------------------------------------------------------------------------
OK...I got a resolution to this last night on the Cingular forum.
Quick answer is that OOL's SMTP Server is locked down. I needed to change the outgoing server to Cingular's (CWMX.com).
Thanks to anyone who took the time to click-in on this thread.
Happy New Year, all!
-pvs
===================
Hi all, OK, this marks my first post on this board. I've been a lurker for a few months, and have settled into a Cingular 8525 as my first Pocket PC Phone.
I noticed a few days ago that I could not send mail via my OptOnline Account, unless I was using WiFi or the 8525 was tethered to my home PC via ActiveSync. I was thnking all along that it was probably due to some piece of third party software that I installed over the past few weeks (a hearty thanks to all on these forums who develop and/or market their wonderful wares, btw).
But today, for a lack of anything else to do, I hard reset and tried simply setting up that one account to try my machine out in its pure form. Lo and behold, I still get the same error, 'Messages cannot be downloaded to your mobile device. Make sure you are connected and that your e-mail account settings are correct. Then, try to download messages again.'
As a matter of fact, it seems this message itself is in error, since it happens when I try to SEND a message, not when I try to receive them. I have even received emails in this account at the same time this error message appears, but at any rate, messages in my outbox do not get sent.
As far as I can tell, all the settings are correct. I have played with them, and tried all the permutations I can think of, but this baby will not send mail via this account. My XpressMail and Hotmail accounts work fine, both sending and receiving, and I can browse the web fine via My ISP or WiFi.
I have spent a lot of time searching the web for an answer to this problem, but it seems it's been quite prevalent with WM5.0 devices for well over a year, and still does not have an answer.
So ... my first post ... which should have been a thank you all, and Happy New Year, has turned into a request for the talents of you folk who know so much more than I regarding these devices.
Can anyone please lend a hand? Also ... is it "legal" to cross-post this message onto other forums on this board?
Thanks so much to anyone who can provide a solution.
-Paul Slabowski (a.k.a. pvs)

I got it working
Like others in this thread I was getting the "unable to download messages to device" error when sending. My solution is:
Try leaving the 'domain' field blank.
It's on the Server Information page, and also on the Outgoing Settings if you 'Use separate settings' for your outgoing server.
Hope this helps you.
Rich

Domian Blank
My Domain is blank and frankly im just getting very agrivated by this. Does anybody eles have other advice to give towards this "cannot download message"?

I've got WM6, I've tried clearing and deleting the account, soft resetting the phone, making sure the domain field is empty, etc. It still gives this error for my POP account while my IMAP account is fine. Anyone find a solution?

Yes, deleting the domain really works in some cases (f.e. Gmail), but the same error occurs in my other account although I delete the domain. And funny thing is that it occurs only when there are some emails in outbox, receiving emails seems to work normnally :S

I'm still encountering this problem after trying everything on this post...
any other ideas?

Just had the same problem tonight. My mail server recently changed IP addresses, so I suspect DNS issues were the cause of my problem. I tried using the new IP address in place of the host name, but that didn't work for me. The account settings didn't seem fixable. Deleting the email account entirely and adding it back did the trick.

Checking Yahoo email

Guys,
Cant seem to get Yahoo emails into my MDA Compact III handset.
I have gone thru the instructions, and filled in the email addy on page 1.
I am not sure what to put in for the User Name on page 2. I have tried using the email addy, and the email addy without the @yahoo.com bit. Neither work.
Obviously the password is in and saved.
On page 3 it is showing the settings as greyed out POP3 and Yahoo.
Page 4 shows Incoming mail: pop.mail.yahoo.co.uk (this was already filled out, I have tried this as a .com as well)
Outgoing mail: smtp.mail.yahoo.co.uk (this was already filled out, I have tried this as a .com as well)
Domain: this was not filled in.....
I have asked for it to connect to both 'The Internet' and 'T-mobile Internet' neither have worked.
When ever I try to 'Send and Recieve' it always just comes up with a screen saying 'Incoming E-mail Password' showing my User Name, Password and Domain. But wont do anything more.
Can anyone confirm what format a user name should be. And also if the Domain is a req firld, and what it could be.
Thanks
Matt

The user name can be anything you want displayed on your sent e-mail, I use Mike Alder in this box and it works fine, the Domain box I leave blank.
From what you describe you have let the device set itself up automatically, I configured mine manually, you can still do this, but first I would check in your e-mail application on the PC what the pop3 address is "pop.mail.yahoo.co.uk" might be the automatically loaded value - but is it correct? - I don't use Yahoo so sorry I can't be more specific - Mike

Can i add my hot mail as well?
thanks
ASZ

I think yahoo charge for their pop email service. hotmail is free to use, and even comes with all facilities for mobile devices to receive and download email.
To connect to yahoo for free via your desktop you can use a freeware application called yahooPops which runs as a pop3 server on the desktop (to which your client eg outlook talks to ), and on the back end it connects via html, translates and downloads the emails for you. Not sure it exists for pocketpc.
Other ways from the browser on the pocketpc you can use mobile.yahoo.com, or used to be a wap.yahoo.com or wap.ou.yahoo.com , which is a text only mail service.

hi all,
i have had my MDA CIII for 4months now. And i used the auto steps walkthrough to setup the yahoo. and surprisely it actully worked....that was until the other day. I dnt knw whats happened, but its like they have blocked me out or something . I am bit curious to why all of a sudden it has stopped. i know the fact you are suppose to pay for pop3 access, but then how comes its been working fine for like 4mnths.
can anyone think why it might not be working anymore?
thnx,
Snoop

Hi,
Just to update things...
I eventually managed to get yahoo email pushed to my phone by subscribing to the £12.00 a year premium yahoo account. It's worked a treat since I joined it.
Not sure why it stopped working for you, or more accurately, how it worked in the first place! But the solution is to join the premium service...for me, it's worth every penny
Matt

mtrob said:
Hi,
Just to update things...
I eventually managed to get yahoo email pushed to my phone by subscribing to the £12.00 a year premium yahoo account. It's worked a treat since I joined it.
Not sure why it stopped working for you, or more accurately, how it worked in the first place! But the solution is to join the premium service...for me, it's worth every penny
Matt
Click to expand...
Click to collapse
hey matt,
ye i know i was proper shocked the 1st few months when it was working. altho it wasnt the best. bcoz my mda kept reading both normal emails and bulk mail at same time. and i get 100's of bulk mail throughtout the day. i not to bothered enough to receive yahoo mail by paying £12. I have web'n'walk from t-mobile, i recon im better off just checking it using the wap version of yahoo mail website. which is what i would recommend if yahoo isnt your primary account.
Snoop

Good point - I have the w'n'walk, but love the push email thing and since this is my main email, it's great to keep bang up to date! Its amazing how little I use email from my home computer now.
I am lucky that I get hardly any spam into my inbox (touch wood) - and the premium yahoo (aledgedly) has better spam protection...
Matt

Touch Pro 2 and gmail

I have had my TP2 for a few days now and i love it, except for the fact that I cannot send or receive email from my gmail account
I can access the internet fine, and use the youtube app fine, but whenever i try to send an email or hit send/receive i get this error message
"CANNOT CONNECT WITH CURRENT CONNECTIONS SETTINGS. TO CHANGE YOUR SETTINGS, TAP SETTINGS"
When i set up the email the only things i was required to supply were my email address and password....so i am assuming the problem lies with the way my handset is trying to access the gmail account, ie. trying to use wifi or something? (i dont have wifi, so i will only be using the "unlimited" interent provided with my t-mobile UK tariff)
has anyone else had this problem or do they know how to get around it as i have finally got myself a decent handset where i can (allegedly!) check my email on the move, but yet i somehow cant get it working?!!
Ihave tried both hard and soft resets to get this sorted but it just wont work and i feel like pulling my hair out!
n

I know it's not much consolation but it just worked for me...
I have a SIM free TP2 and UK T-Mobile Web'n'Walk.
Incoming mail server is imap.gmail.com
Account type is IMAP4
Username is my full gmail username
Outgoing mail server is smtp.gmail.com
outgoing server requires authentication is ticked
All this was set via automatic configuration.
Hope this helps,
Richard

This is what i have done to recieve and send Gmail trueout the standard email client on my Pro II.
First of all you have to enable imap at your gmail account which you can find under settings.
Then on your phone do the following settings.
- make an new account in your email client
- fill in your gmail adress
- fill in your name
- fill at incomming mail "imap.gmail" and account type "imap"
- fill in your account name (gmail adress) and password
- fill at outgoing mail server smtp.gmail.com
and those two checkboxes must be checked
- auto recieve and send is up to you
hope this will help you

ther's a known bug in windows mobile poutlook...
sometimes the autoconf for gmail doesn't work...(i had the same issue on my omnia)
you only need to enter the account details by hand..
to do that, in the first screen where your address is asked, enter [email protected]
leave it without the final m.
after that fill in manually all the account details, then when finished edit the account and put that m in the domain...
that should work...at least in my omnia was the only way to get gmail working...

I used this guide en it works perfectly
http://mail.google.com/support/bin/answer.py?answer=78886

hi, thanks or all the replies, most appreciated.
however, i have now established that i can get my gmail account working - but only over wifi!?!? when the wireless router is turned off i get the same message as before, so there must be a setting or something that is telling my TP2 to look for a wireless connection when performing a send/receive, rather than using the "internet" (if thats the right term) that is included in my contract..AAAARGH...
i have had a look but cannot find any settings for this so i must be going mad?
can anyone shed any light on this for me before i go mad??!!

quasar99 said:
hi, thanks or all the replies, most appreciated.
however, i have now established that i can get my gmail account working - but only over wifi!?!? when the wireless router is turned off i get the same message as before, so there must be a setting or something that is telling my TP2 to look for a wireless connection when performing a send/receive, rather than using the "internet" (if thats the right term) that is included in my contract..AAAARGH...
i have had a look but cannot find any settings for this so i must be going mad?
can anyone shed any light on this for me before i go mad??!!
Click to expand...
Click to collapse
Disable proxyserver, don't have the place where you can find this. I have a dutch rom

I have a gmail imap connection on my HTC Touch that was working great but has failed to connect for the past two hours or so.

I found that to change from Download 30 Days to 7 days and it worked fine.
Oddly I returned my TP2, and switched back to my VarioV, same problem (had worked fine until then). New TP2 is now here, so will start with 7 days and try expanding to 30 days later.

chillaxx said:
Disable proxyserver, don't have the place where you can find this. I have a dutch rom
Click to expand...
Click to collapse
does anyone know how to do this? i cannot find this option anywhere?

is there any way i can see how my tp2 is trying to receive data from my gmail account, ie. if it is trying to use internet or wifi?!?
also, does anyone have any details for the settings that their tp2 (on t-mobile UK) is using when trying to retrieve email (not by wifi)??!
i'm also assuming that t-mobile wont be able to help me as i got my phone/contract via a third party and t-mobile themselves dont seem to stock the phone themselves....

I had this problem, it drove me nuts until I worked out what it was, if i was already connected it would work but it would not establish its own new connection.
To fix it go into the email settings for the account, then select:
Edit Account Setup
Next
Next
Next
Next (Outgoing (SMTP) mail server screen)
Click the “Advanced Server Settings” Link
In the “Network connections” it defaults to “The Internet” but if you have gone through the “Connection Setup Wizard” when you first installed your SIM it renames the connection, in my case to “T-Mobile Internet”.
Change “Network Connections” to the correct one i.e. “T-Mobile Internet”
hey presto, you can now get your emails
hope this helps everyone

nlhall said:
I had this problem, it drove me nuts until I worked out what it was, if i was already connected it would work but it would not establish its own new connection.
To fix it go into the email settings for the account, then select:
Edit Account Setup
Next
Next
Next
Next (Outgoing (SMTP) mail server screen)
Click the “Advanced Server Settings” Link
In the “Network connections” it defaults to “The Internet” but if you have gone through the “Connection Setup Wizard” when you first installed your SIM it renames the connection, in my case to “T-Mobile Internet”.
Change “Network Connections” to the correct one i.e. “T-Mobile Internet”
hey presto, you can now get your emails
hope this helps everyone
Click to expand...
Click to collapse
if the connection has a proxy in the setup, than you can use that connection only if selected like above...
if you leave "The internet" the proxy settings are ignored...you have to select the exact connection..but this will prevent the gmail to connect with wifi

Email Messaging on HTC Touch Pro2

Hi All,
Say, if i do emails on my tp2, i send the email out and forget to bcc me, i forward the email to myself separately. I only get my signature without the full contents. Wondering if this is normal??
Is there any way we can configure the client or alternate programs to like pull emails like from 9am to 6pm instead?
Kinda like Nokia's default email client on e71s, i can choose when and how to download emails. And at the same time have an option to automatically send me a copy of the emails.
Thanks alot in advance or sorry if this is a stupid question..
EDIT: Is this a known thingy? Will wm 6.5 be addressing this issue?

1. When I forward mails, the entire message is included. I can think of 2 reasons why this isn't working for you.
a. You use Windows Live email (ie Hotmail) and you didn't toggle on the setting in Windows Live to include original message when replying/forwarding.
b. You've only set to download the email headers. You need to download the full message from the server before forwarding to include the whole message.
2. You can schedule your email push/pull between specific times of the day only if you use Windows Live or Exchange.
I know many people like to bcc themselves on all emails but you can just check the Sent folder as an alternative. I guess it's just a matter of preference...

My work email is primative pop3/smtp.. I'm using the default messaging on the htc touchflo3d, not the windows live.
Hmm.. i'll try the down entire message thingy..

Hi,
Have tried to use download entire email messages... still the same.. when i forward the email out.. it goes until only my signature.. does not forward the entire message

anymore ideas??

I was wondering that perhaps it may be because you're connecting via POP3. But this doesn't appear to be the case. I just tested setting up my Gmail account via POP3 and I can forward messages just fine.
After you tap on "Forward", you should be taken to a compose screen where you type in your recipients. If you scroll down, do you see the original message in full?

thats the thing... i can see the whole email in full.. theres teh "edit original sender's message" thingy...
but when i actually click send.. it only send out the portion i typed.. -.-
I have sent my phone in for service b4, updated software, hard reset... all the same... maybe i'll try my gmail and update again..

What happens if you tap the part thatt enables you to edit the original message before you send?

same ; ;
10chars

tested with Gmail and yahoo... by configuration, both uses imap on the client..
tested with my other personal email from isp... think i found a pattern..
If i forward from inbox.. everything ok..
If i forward from sent items... only what i type is sent...
i didnt test on imap.. deleted my account.. anyone got any observations??

any help??!?? ; ;