TF3D + SecondToday - Touch Pro2, Tilt 2 Windows Mobile General

I am unable to run SecondToday with TF3D. It installed OK.
When I click on start menu icons to run it or configure it, nothing happens.
I can run it after unloading TF3D, but then I am unable to load TF3D again.
I read some of you guys are running it with TP2 so it should work, right?

Mesquire said:
I am unable to run SecondToday with TF3D. It installed OK.
When I click on start menu icons to run it or configure it, nothing happens.
I can run it after unloading TF3D, but then I am unable to load TF3D again.
I read some of you guys are running it with TP2 so it should work, right?
Click to expand...
Click to collapse
Make sure you don't checked the TF3D on the "SToday Setup"
Yup works for me, ...tried MTP, and Detacher... not really like it. And tried Second Today...awesome.
You need to run the SToday Setup... and Remember to do a softreset after that.
I just switch between "Second Today" and "TDF3D" show on the attach pic.
Note:
Always backup your stuff (That me!)

Related

no mms option anywhere

I recently ran the official vm6 rom(SWEDISH) upgrade on my tytn, and quickly discovered that i have no mms option anywhere. In the messaging menu i have no *MMS option as i had in vm5.
The sms and data are working perfectly. Does anyone have a clue to what has gone wrong? has perhaps the MMS composer not been installed? in that case - how do i install it?
Have you skipped the EXTROM installation? It ought to be in the EXTROM, if it is official.
Try this:
Go to Msg, make New/MMS. Then go to Menu/Optons/Message Options
hmm
hanmin said:
Have you skipped the EXTROM installation? It ought to be in the EXTROM, if it is official.
Click to expand...
Click to collapse
hmm.. how do you mean? i just ran the whole update-tool and hoped for the best. If its in the EXTROM, can i run some sort of cab from there? OBS! newbiewarning
tried
klabton said:
Try this:
Go to Msg, make New/MMS. Then go to Menu/Optons/Message Options
Click to expand...
Click to collapse
Unfortounately there is no MMS option available for me there..
klabton said:
Try this:
Go to Msg, make New/MMS. Then go to Menu/Optons/Message Options
Click to expand...
Click to collapse
That was only needed in later versions of the mms program.
I just installed the Swedish official and had no problems with the mms.
Start/Meddelandefunktion click on Meny/Alternativ/ Select "MMS", click tab "Servrar", click "Nytt" then input settings from your operator don't forget to to set as "Ange som standard" at the end.
If it doesn't work reinstall and make sure you don't abort the installation of the extrom files which happens after you finnish setting up screen etc.
strange
jompao said:
That was only needed in later versions of the mms program.
I just installed the Swedish official and had no problems with the mms.
Start/Meddelandefunktion click on Meny/Alternativ/ Select "MMS", click tab "Servrar", click "Nytt" then input settings from your operator don't forget to to set as "Ange som standard" at the end.
If it doesn't work reinstall and make sure you don't abort the installation of the extrom files which happens after you finnish setting up screen etc.
Click to expand...
Click to collapse
Under Meny/Alternativ/ i have no MMS option. So i guess that something went wrong during the extrom installation. But i didnt look like somtething went wrong when i ran it.
But there is no way to just run one of the cab files from the extrom? i really dont want to rerun the installation.
skak said:
Under Meny/Alternativ/ i have no MMS option. So i guess that something went wrong during the extrom installation. But i didnt look like somtething went wrong when i ran it.
But there is no way to just run one of the cab files from the extrom? i really dont want to rerun the installation.
Click to expand...
Click to collapse
You can try to unlock and mount the extrom and try to start the programs from ext rom. I'm guessing there is some file there for the mms.
Not sure, but you can try getting 'Total Commander' (freew), type in "\Extended_ROM" on top of the dir input line to access to the ExtROM. Guess, get, and run the CABs there.
ok
hanmin said:
Not sure, but you can try getting 'Total Commander' (freew), type in "\Extended_ROM" on top of the dir input line to access to the ExtROM. Guess, get, and run the CABs there.
Click to expand...
Click to collapse
ok, i just tested that and after rerunnig the setup file there there it still didnt work.
But i think i have found the source of the problem. I completely forgot that i had run i smsbackup from spb backup. I think that it is that backup that has corrupted something so the mms dosent show.
It looks like i have to rerun the rom update to make it work. Thanks for all the help guys!!

HTC TyTN vs. HTC HomePlug

Hello,
I've read so many posts about this nice little plug-in, and found a couple that seem to have the exact same issues as me but no solutions/aswers has been posted. I'm hoping someone in here can shed some light onto my ignorant mind.
I have an HTC branded TyTN (Model name HERM200). I have flashed it with the official HTC Swedish WM6 upgrade ROM. Now I've found this nice HTC HomePlugin that I wanted to use. I've tried many different versions but I have the same problems with all of them.
I install HTC HomePlug 2.1, soft-reset. The plug-in loads up nicely. But these things doesn't work:
1. I cant seem to connect any contacts to the speed-dial buttons.
2. I cant seem to connect anything to the launcher-buttons (It just displays a folder icon when I click an empty button.)
3. Weather tab doesnt show anything. (I can live without it though)
4. Musicplayer seems to stop music after a second. I press play, it plays for a second, then stops.)
Please, does anyone have any ideas on why it won't work?
Chrisofsweden said:
I install HTC HomePlug 2.1, soft-reset. The plug-in loads up nicely. But these things doesn't work:
1. I cant seem to connect any contacts to the speed-dial buttons.
2. I cant seem to connect anything to the launcher-buttons (It just displays a folder icon when I click an empty button.)
3. Weather tab doesnt show anything. (I can live without it though)
4. Musicplayer seems to stop music after a second. I press play, it plays for a second, then stops.)
Please, does anyone have any ideas on why it won't work?
Click to expand...
Click to collapse
Hi !
Same here with the "HTC Home Plugin v2.1 (patched by N2A)" found at http://www.pocketemu.com/download8.html on a Touch Dual, with French OEM ROM !
1. Cant' add a working shortcut into the Contacts tab : the name appears but when I tap on it, nothing appens
2. Showing a "Folder" icon into the "Sound Profile" tab
3. Showing a "Folder" icon when adding a HTC App only into the "App" Tab : ie. "rotate" or "backlight" adjustment app
4. The weather is working.
The language is French, on a French ROM, but in HTC Home Customizer 1.0, the selected language is "US English". When I switch to French, the language in HTC Home is English...
Any ideas ???
Thx
Try this here. Should be what your looking for.
I've tried this one already:
"Update 17 November 2007 New Version 2.1.1005.722
1. Install on HTCHome Dir and With Brghtnes Fix for Hermes
http://rapidshare.com/files/70343559....schen.cab.zip"
Does not work. What I don't understand is where to get these...
- If not working properly, Try to install sdkcerts.cab.
- If still not working properly, Try to Install cert_SPCS.cab
...and if this is meaning it only works on an English language WM6:
- This is 0409 English version.
HELP!
I've tried this one already:
"Update 17 November 2007 New Version 2.1.1005.722
1. Install on HTCHome Dir and With Brghtnes Fix for Hermes
http://rapidshare.com/files/70343559....schen.cab.zip"
Does not work. I've tried following:
- If not working properly, Try to install sdkcerts.cab.
- If still not working properly, Try to Install cert_SPCS.cab
Installing these does not help either
On another note, does this mean it only works on an English language WM6?
- This is 0409 English version.
HELP!
Nah, should work on other languages as if you read through previous link I give ya, it worked on a spanish rom.
Does not work. I've tried following:
- If not working properly, Try to install sdkcerts.cab.
- If still not working properly, Try to Install cert_SPCS.cab
Installing these does not help either
Click to expand...
Click to collapse
I'll see what I can dig up
Thanks alot!
It doesn't seem like its the certs that stop it from working since
it loads up correctly. It's just the stuff mentioned in the first post that does not work... launcher, quickdial, musicplayer and weather.
Does it require WM6.1?
Did u manage to dig up anything? I'd really like to have it working.
If you are running a swedish rom you need to chenage some things in registry, or find the hhcv08.cab to customise the plugin, if I remember correctly you can change settings for language.
I also recall posting n the subject some time ago, do a search on my previous posts.
try this... I run it smoothly.
Chrisofsweden said:
Hello,
I've read so many posts about this nice little plug-in, and found a couple that seem to have the exact same issues as me but no solutions/aswers has been posted. I'm hoping someone in here can shed some light onto my ignorant mind.
I have an HTC branded TyTN (Model name HERM200). I have flashed it with the official HTC Swedish WM6 upgrade ROM. Now I've found this nice HTC HomePlugin that I wanted to use. I've tried many different versions but I have the same problems with all of them.
I install HTC HomePlug 2.1, soft-reset. The plug-in loads up nicely. But these things doesn't work:
1. I cant seem to connect any contacts to the speed-dial buttons.
2. I cant seem to connect anything to the launcher-buttons (It just displays a folder icon when I click an empty button.)
3. Weather tab doesnt show anything. (I can live without it though)
4. Musicplayer seems to stop music after a second. I press play, it plays for a second, then stops.)
Please, does anyone have any ideas on why it won't work?
Click to expand...
Click to collapse
Try this [size=+2]cab[/size],
1. install,
2, wait for 10 seconds,
3. go to to day setting, uncheck the Home plug-in,
4. ok,
5. go to today setting again,
6. re-tick the home,
7. ok, ok, then you will see the 5 tap home.
8. want all 6 taps?
9. go to today setting, home tap, tick the music tap,
10. ok, ok then wait some seconds.
11. DONE ! ^_^
dioxda2 said:
Try this [size=+2]cab[/size],
1. install,
2, wait for 10 seconds,
3. go to to day setting, uncheck the Home plug-in,
4. ok,
5. go to today setting again,
6. re-tick the home,
7. ok, ok, then you will see the 5 tap home.
8. want all 6 taps?
9. go to today setting, home tap, tick the music tap,
10. ok, ok then wait some seconds.
11. DONE ! ^_^
Click to expand...
Click to collapse
This did not work. If I check any tab other than Home, the plug-in doesn't show anything at all. Thanks anyway...
Just to follow up. I finally got it working. What did it was that I installed HTC Home Customizer and in the settings in there on the Options tab I selected Plug In Language Swedish and now everything works like a charm!!
hi
I need your help desperately.
I flashed Stu's vista rom and then I installed Emu's Htc home .cab (version 2.1)
After that my phone loads the startup screens and it seems to freeze in the windows screen. I can see the soft keys, the start button....but when I click on that nothing happens.
I try to connect it with my pc but there isn't any partnership established. Also I did many soft resets and pulled out the battery.
Can you help me please?
spinyian said:
I need your help desperately.
I flashed Stu's vista rom and then I installed Emu's Htc home .cab (version 2.1)
After that my phone loads the startup screens and it seems to freeze in the windows screen. I can see the soft keys, the start button....but when I click on that nothing happens.
I try to connect it with my pc but there isn't any partnership established. Also I did many soft resets and pulled out the battery.
Can you help me please?
Click to expand...
Click to collapse
I'm not really an expert spinyian, but have you tried installing the certs?
Search these forums for SdkCerts.cab and Cert_SPCS.cab. As I understand it these allow some unsigned applications to run properly and may be required by some ROMS and devices.

start and minimize a program automatically

Hallo
It is possible at the start up of tytn start and minimize a program ( keep in back ground) automatically?
Thanks at all
Excuse if my english is bad, i write a little post to wrong less !
Patrizio
pioppolo said:
Hallo
It is possible at the start up of tytn start and minimize a program ( keep in back ground) automatically?
Thanks at all
Excuse if my english is bad, i write a little post to wrong less !
Patrizio
Click to expand...
Click to collapse
Nobody can help me ?
Patrizio
are you meaning when the phone boots? You might be able to do that with mortscripts, check the threads out, and use the search link below!
The easiest way would be to just drop the shortcut in Windows>startup.
Thanks for all
i have downloaded mortscript, when i will have time i will try, and if i will have a success i will inform you
See you soon
Pioppolo
It would be much easier to copy the file or program you want, and then go into Windows then StartUp, and then "Paste Shortcut" it, and restart.
After that, you'll notice that the application will be running in the background.
DarkWolfx said:
It would be much easier to copy the file or program you want, and then go into Windows then StartUp, and then "Paste Shortcut" it, and restart.
After that, you'll notice that the application will be running in the background.
Click to expand...
Click to collapse
I have a WM6 italian, and when i copy the program ( not the shortcut, because i can't create a shortcut) in " esecuzione automatica", it is the same of startup folder, the program start but stay on display!
Another way?
Thanks
pioppolo said:
I have a WM6 italian, and when i copy the program ( not the shortcut, because i can't create a shortcut) in " esecuzione automatica", it is the same of startup folder, the program start but stay on display!
Another way?
Thanks
Click to expand...
Click to collapse
I'm arrive to minimize at start up the program "Call firewall", with a little script using mortscript. Thanks
what about programs that don't auto-minimize? for instance, Gentimer 2.x starts up on boot due to me putting the *.lnk to it in the startup folder. However, it boots and runs, yes, but it doesn't automatically minimize to background, and I have to manually press end to get it down. How to do this with those "special" programs?
oh in case i forgot to mention before, I'm a Q9c user.
dirt ycar 74 @ hot ma il . com (remove spaces to send email)
---Dusty

Assign anny Program launcher to Startbutton in upper left corner

Hallo
i found this: http://forum.xda-developers.com/showthread.php?t=486712
With this program you can assign anny program to the "software" startbutton.
I mapped YotaCenter to start button and would say its far better than the new windows startmenu and the new htc start menu.
It has several advantages. YotaCenter enables you to place favorite apps in an easy way and brings a taskmanager.
Also other program launchers are better than the windows/htc one - so give this startbutton app a try
I want to do this could you tell me what I have to do as that thread is a bit confusing for a nooby?
Thanks
thanks!!!
hI MARKUSSIEBERT!! Thank you for your great app. I am happy finally! Thanks
has anyone got this working on dutty 2.3?
Yes - im using it with dutty 2.3 even if it seems that there are some unexpected behavios.
Unexpected behaviors are:
-sometimes (ever 15 - 20th touch) the original startmenu appears, but its ok
-a second click on "Start" doesnt close the launcher window (because it only launches)
How to use it:
1. install the cab
2. open any registry editor
3. goto HKCU\software\allelimo\StartButton\Run
4. change the value to what you want to start
If you want to launch:
\Program Files\MyApplicationFolder\MyApplication.exe
you have to insert:
MyApplicationFolder\MyApplication.exe
if you want to start an application that is not on the Program Files folder, you can write the full path instead:
\Memory Card\Program Files\MyApplicationFolder\MyApplication.exe
How to extend the hook to the "Start" text?
HKCU\software\allelimo\StartButton\HookText
Set this value to 1 for hooking the word "Start"
Delete the key for hooking only the Start button
yeah, i could get it to work from the memory card, but i reinstalled yota onto the phone and i got it working..
as you said clicking start doesnt close it,
one more (i dont know if it is limited to dutty 2.3) if you click to the right of the start text the normal start menu will come up, every time..
you have to diasble the new htc startmenu first,
To enable "old" LargeMenu (Disable new manila start menu):
HKEY_LOCAL_MACHINE\Software\HTC\EnlargeMenu\Enable ManilaStartMenu =dword:00000000
then configure this tool...works for me

TF3D wont launch

Hi all, NOOB so apologies if in the wrong place, Downloaded a theme and now TF3D wont launch , keeps saying tap to launch but it wont. Running Winmo6.5.
ANy ideas on how to get TF3D to work?
Start>Settings>Today>Items> Make sure Touch FLO 3D box is checked then click 'ok' in Top Right corner.
Hope that helps mate.
robertjread said:
Hi all, NOOB so apologies if in the wrong place, Downloaded a theme and now TF3D wont launch , keeps saying tap to launch but it wont. Running Winmo6.5.
ANy ideas on how to get TF3D to work?
Click to expand...
Click to collapse
This is a result of installing corrupt or incompatible *_manila files. Usually happens when you install a theme intended for one Manila version on a different Manila version. What you are experiencing is Manila entering a crash loop. It attempts to start and then crashes, repeatedly. Have you tried uninstalling the theme? If you have, you may have to hard-reset to recover from this
A suggestion in the future would be to backup all *_manila files in your \Windows folder before you overwrite any of them so that you can restore them if necessary.

Categories

Resources