New Verizon Vogue (xv6900) Previously I had 6700 & 6800
Followed the Faq
Loaded old CoKe ulocker
Loaded old Sprint Rom
Loaded New (2.31) Coke Unlocker
Loaded New Verizon Rom
Loaded Bell Rom (to get 3.42.3 radio)
Loaded NFSFAN (sp?) wm 6.5
Ran DCD Carrier Cab
Ran MMS Cab
Imported provisiong XML via Advanced Config
Data works fine all calls get "Signal Faded" "Call Is Lost"
Once I got the authentication message so I called the #8899 number and the lady quickly sent out an activation to my phone
performed reset after that
Still getting "Signal Faded" "Call is Lost"
What did i screw up here?
Related
today i tried to switch my xda2 from t-mobile's 1.72.170GER final rom back to o2's 1.72.184GER final which has been provided recently. i run into that damn country code error 120 because my xda2 has got a t-mobile device id. please find my steps for solving that problem:
1. unpacked the 1.72.184GER package into a folder and replaced the original HimaupgradeUt.exe by the hacked one (which is supposed to ignore country codes).
-> result: same problem - country code error 120 : 1-3-1-1-1
2. then i deleted the HimaGetDeviceData.exe in the folder containing the rom-files. and i deleted any existing DeviceData.txt in the windows folder of my xda2. time to start again the hacked HimaupgradeUt.exe.
-> result: first screen with no errors. it tells me that my device is going to get an update, from rom 1.72.01, radio 1.17.00, extrom 1.72.170 to rom 1.72.01, radio 1.17.00, extrom 1.72.184. i am happy so far but the next screen is again that damn county code error 120 message :-( meanwhile my device is stuck in bootloader 1.06 mode.
3. at this time i deleted the HimaClearJumpCode.exe (which is no longer needed for setting the xda2 in bootloader mode, it is already there) and started again the hacked HimaUpgradeUt.exe (the third time).
-> result: first screen with no errors. it tells me that my device is going to get an update, from rom "blank", radio "blank", extrom "blank" to rom 1.72.01, radio 1.17.00, extrom 1.72.184. next screen tells me that the devices rom is getting erased now and the progress bar shows the current status. everything went through the update process fine.
and my device has been successfully transformed from a t-mobile mda2 which looks like an xda2 to a real o2 xda2 with current xda2-software
summary: i guess you can shorten the whole procedure by setting the xda2 into bootloader mode connecting to your pc by usb unpack only the three rom file images into a folder, copy the hacked HimaUpgradeUt.exe into that folder and start it. but i have no time and motivation for doing that since my device works now.
best regards
peter
where to download hacked HimaUpgradeUt.exe
Dear
where to download hacked HimaUpgradeUt.exe
beast regards
:lol: :lol: :lol:
Thank you very much
Thank you very much its work now
beast regards
o2 ruu
i have tryed upgrading my i-mate to the o2 finaleng ruu with the help of dcs i got it to work with the acked file but now i have megga probs, no camera no extrom and no caller id file so i can't open pictures or video as they are looking for 'albam' to view them, can you suggest a way to get them back???
i have tried the upgrade a fair few times and am getting to the end of a short fuze..... if i run the upgrade direct from o2 i get a model id error, in the device data file i noticed that it has::
usb30 cdl uk5
cdl 1.70.00wwe ph10
or something like that..... it's the uk5 bit that is new..
any ideas :?:
Hello people ..
I updated my T-mobile MDAIII from windows 2003 to "WM5"
it worked ok & looks cool but I can't connect to the network
& it work just as a PDA not a phone
also when I open "SIM manager" nothing happen & it doesn't open
even when I opend phone & dialed "*#06#" to retrive IMEI it hanged & I had to reset it & didn't show the IMEI#
I noticed also that it doesn't retrive the call duration & read "unknown" in both Incoming & Outgoing
also my phone has 128MB RAM, now it reads 96MB, is that normal with the new version ??
when I reset or hard reset it writes:
"No GSM
D 5.35.04. WWE"
1- if I updated to WM6, will it correct the problem?
2- is "No GSM" means it's not able to connect to a network
3- how I can reactivate the GSM service or connect to the network
Thank you for your help
Not an expert here but with the help from a member here (m a j u) both me and my brother in-law have successful upgrade our SX66 to WM5.
Try a soft reset (use the stylus to activate reset button) on your device everytime after you remove the battery, it work for both of us and should work for you.
Reset till the radio versions show.
Also some dialpad themes seem to cause issues with the phone (I had a problem with iphone theme for dialpad).
reflash radio rom
I'll try the re-flash method too. I've been having problems with a scheduled profile starting up the phone radio in the morning automatically. At night I turn it off but it doesnt come on in the morning, even though I know the profile comes on at the selected time.
Timofox said:
Hello people ..
I updated my T-mobile MDAIII from windows 2003.....
Thank you for your help
Click to expand...
Click to collapse
Hi, Make sure you have Radio Rom 1.15.00 and none of your profile turns the 'Phone' off automatically.
Hi,
I just bought a HTC.
This is my first PDA.
I tried to install google map to use the internal GPS, but I have a message : "Installation of GoogleMaps_compressed.CAB was unsuccessful".
Actually I bought this phone, most for the GPS.
Please help.
PS: the phone was SIM locked and I called AT&T yesterday and they gave a code which unlocked the phone. Since then, I can use the device to make phone call with a SIM not from AT&T
THIS IS A STRAIGHT COPY/PASTE FROM dharvey4651's POST ON PPCGEEKS. I JUST WANTED TO SHARE IT HERE FOR THOSE THAT DO NOT CHECK PPCGEEKS. Enjoy!!
--
Upgrade Sprint Touch to Rev. A. COMPLETE TUTORIAL With Download Links.
As there are many Sprint users here and the new Alltel thread growing like a fungus, I figured it was a good time to create a tutorial thread with download links for Sprint users.
Let's begin.
UPGRADING SPRINT TOUCH TO REV. A
Make sure your phone(Sprint Touch) is fully charged as this will take the better part of an hour. While your phone is charging, I would strongly recommend using a program such as SPB Backup to backup all important information on your device as it will be hard reset multiple times during this process.
1. Download ImCoKeMaN's new Vogue unlocker: http://rapidshare.com/files/11019074...r_MFG_2.31.exe
2. Make sure your device is connected to ActiveSync or Windows Mobile Device Center, whichever you have.
3. Run Vogue_unlocker_MFG_2.31.exe and follow the on screen instructions. It is VERY easy to do this wrong so MAKE SURE YOU READ ALL ON SCREEN INSTRUCTIONS during the process of unlocking your device. Your phone will display SPL 2.00.coke at first but will then change to 2.31.coke as you progress through the process.
4. Allow your phone to boot up completely into OS once the unlocker process is done. Hold the power and camera button and insert your stylus into the soft-reset hole next to the mini-usb port on the bottom of your phone. It should display an SPL of 2.31.coke.
IF YOUR DEVICE DISPLAYS THE 2.31.coke SPL THEN CONTINUE TO STEP 5. IF NOT, REPEAT STEPS 3&4 UNTIL IT DOES.
5. Reboot your phone so that it is back in OS and you are able to use the phone and connect to ActiveSync/WMDC.
6. Download and run RUU_Vogue_4350_ALLTEL_WWE_3.04.671.2_Radio_4350H_3 .37.10_Alltel_NV2.00_PRL30008_0331_Ship_withSpecia lNBH.exe
and follow the on screen instructions. It is much the same as any RUU you may have used before. The update will appear to have crashed at 11%. Do NOT be alarmed as this is normal.
THIS STEP CAN BE FATAL FOR SPRINT USERS SO READ CAREFULLY!!!
7. When RUU is completed, align screen and set date and time as usual.
For All Non-Alltel users once you finish aligning the screen and setting the date and time it will say "Tap the screen to continue". As soon as you do this it will immediately display a message that says "Customization will begin in 3 seconds. Press OK to continue." SOFT RESET NOW!!! Do NOT allow carrier customization to run. Soft reset during that 3 seconds.
8. At this point your phone should be booting back up. It should still display the Sprint PCS banner on the HTC Home plugin and you will still be able to make and receive calls. At this time, test your internet and see if it works. I have read conflicting stories of people using the Alltel ROM and being able to use the internet still and also people not being able to use the internet.(If your internet does not work do not be alarmed, there is still one more step)
9. If your internet works and you like the Alltel ROM then you are done. If your internet does not work or you would rather have a Sprint ROM, continue to step 10.
10. Download RUU and jakdillard's new WM6.1 ROM below.
ROM - ftp://up.ppcgeeks.com/Vogue/Users/gpstest2.1.rar
RUU - http://www.megaupload.com/?d=VNIQUDP2
11. Copy contents of RUU folder to gpstest2.1 folder and run RomUpdateUtility.exe. Follow on screen prompts and ROM update should go smoothly.
12. Sprint users you are now done. You should now have a Rev. A Sprint Touch with the OEM look and feel of JD's 19209 build.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
GPS - HOW TO.
I know a lot of you have been wanting to get GPS working. Here is how to do it.
1. You must be using JD's newest test ROM which is available for download in step 10 of the tutorial above.
2. Download Google Maps from here: http://www.handango.com/ampp/store/P...&productType=2
It is free so don't worry.
3. Connect via ActiveSync or WMDC(whichever you have) and copy the downloaded cab file to your phone and run it. Install to main memory.
4. Just run Google Maps a wualla. Done.
How-To Get GPS Working Everytime (added by mindfrost82):
- Download GpsViewer.PPC300_2577.cab.zip(Holux GPS Viewer)(free)
- Run that program before you run any other GPS program
- Set it to Com4 and click Open
- Be near a window to get a fast lock on GPS (mine still works inside my house though)
- When you start to see what looks like lat/long in the display minimize it (don't close it)
- Now run Google Maps (or any other app) and set it to Com4 (or automatic should work too)
- It should pickup GPS right away since the GPS Viewer already has the locks
- Remember to close the Holux GPS Viewer when you're done or it'll constantly use GPS and drain your battery!
Quote:
Originally Posted by mrnamster
Here's QuickGPS with the patch: QuickGPS with patch.zip. I threw in a ReadMe. Feel free to add these attachments to the first post!
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
DOWNGRADING AND REVERTING BACK TO ORIGINAL SPL
1. Download ImCoKeMaN's original unlocker here: ftp://up.ppcgeeks.com/Vogue/Users/Im...e_unlocker.exe
2. Run Vogue_unlocker.exe and follow the on screen instructions to a T as it is very easy to mess up. This will overwrite the 2.31.coke SPL. During the unlocking process your device will display 0.36.coke SPL. This will change once update is complete.
3. Once you finished with the unlocker, your SPL should no longer display 2.31.coke but should now display 0.40.coke.
4. Insert your stylus into the soft-reset hole but do not allow to boot back up into OS. Instead, hold down the camera and power buttons and insert the stylus into the soft-reset hole again putting you in bootloader mode.
IF YOUR DEVICE STILL DISPLAYS 0.36.coke THEN CONTINUE TO STEP 5. IF NOT THEN RE-RUN STEPS 2&3 UNTIL IT DOES.
5. Since it is recommended that you flash back to the OEM 6.0 Sprint ROM at this time, that is the link that I am providing here. Download and flash the OEM 6.0 Sprint ROM. This will overwrite the custom SPL written by ImCoKeMaN's unlocker.
6. You're now done. Your phone has now been reverted back to it's original shipped state.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
RESTORE THE 1.33.003 PRI
(Must complete the Downgrading and reverting back to original SPL tutorial first)
If you are a Sprint user and you allowed the Alltel customization to run and complete then you most likely are now wondering where the Sprint PCS banner went from the HTC Home Plugin and are also wondering why you are not able to connect to the internet regardless of what you do. This is a tutorial on how to fix this problem.
What happened to cause this problem is that Alltel's customization also contains a 2.01.001 PRI which is different from Sprint's 1.33.003 PRI. Allowing customization to run will overwrite Sprint's with Alltel's leaving you with no internet or Sprint PCS banner on the Home plugin.
Here is how to fix it:
1. Download GetSPC here: http://www.5gmobile.us/mobilefiles/VX6800/GetSPC.zip
2. Extract the zip file and copy the GetSPC folder to the root of main memory of your device.
3. Go to Start/Settings/System/Device Information and either open notepad or get a piece of paper and write down your ESN. This is your HEX ESN.
4. Run GetSPC.exe from that folder you placed on in the ROOT folder of your device and in the TOP box, type in your HEX ESN. Hit "GO" and the number generated will be your MSL. Write this number down as well.
5. From the dialpad(MUST BE ORIGINAL VOGUE DIALPAD, NOT A SKINNED DIAL PAD) dial ##786# and it will bring up a large list of quite a few different numbers. Write down your MDN and MSID(you will need them, trust me).
6. Click Menu and select reset. It will ask you to put in an unlock code. Type in your MSL. Everything will reset back to the factory defaults, including your PRI, MDN, and MSID.
7. Follow boot sequence and align screen and what not and allow Sprint's customization to complete.
8. From the dialpad, dial ##(6 digit MSL here)# and click edit. Type in your MDN and MSID and click OK.
9. Your phone should now be reverted back to the bare bones stock OEM 6.0 Sprint ROM with the Sprint PRI of 1.33. You're done.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Special thanks to
ImCoKeMaN
jakdillard
Musicman247
Mindfrost
Nice, here's the link to the original thread, which might get updated.
I have attached QuickGPS again along with GPSTool if anybody is interested.
Sprint Customization
Is there a way to put the Sprint customizations on here? E.g. a .cab that would install the Sprint style cube, today screen plug in, SprintTV, Sprint Music, etc.?
One thing I noticed was that the cube is HTC but when you spin it, it is Alltel. I have searched both here and PPCGeeks but haven't found any Sprint cabs.
Any help?
Other than that, 6.1 and GPS, hotness! Works great.
Click to expand...
Click to collapse
Update: I found most of them, the link to where for anyone else is http://forum.ppcgeeks.com/showthread.php?t=22706
Now I am only trying to get the following: the updated Sprint Cube, the Sprint animated splash screen, and the Sprint theme.
Anybody?
I just wanted to say that this works perfectly on Bell Mobility in Canada, and it's great!
I followed the process and I've been waiting for this since I purchase the Vogue last year. I am impressed by this and I cannot believe Sprint was not able to make this happen any time sooner. This is great!
This would make a great sticky!
Can you please re post link for OEM 6.0 Sprint ROM. THanks
zantaire said:
Can you please re post link for OEM 6.0 Sprint ROM. THanks
Click to expand...
Click to collapse
http://www.megaupload.com/?d=YJVC72MN
I can also attest that this works perfect. Winmo 6.1, GPS, Rev A data speeds, clean fast (so far) stable rom. Also, an added bonus that i found is with this rom my mic sensitivity issue has been resolved. I could not hold a converstaion with someone if i was in a relatively loud atmosphere. Must be a 6.1 update or something. Who knows.....
If anyone has any questions, feel free to ask. Big ups to the original poster at ppcgeeks.com
I read about some registry change for the mic sensitivity..
mrnamster said:
I read about some registry change for the mic sensitivity..
Click to expand...
Click to collapse
I dabbled in that a while back with no luck. There was a CSV type file somewheres that i found w/ help from this forum. It looked too easy to mess something up.
Side note: RevA is blazin fast....
I can't run the "RUU_Vogue_4350_ALLTEL_WWE_3.04.671.2_Radio_4350H_ 3.37.10_Alltel_NV2.00_PRL30008_0331_Ship_withSpeci alNBH.exe" file. It always gives me error "Vouge has encounter a problem and needs to close"
What should I do? I have XP SP2 with Admin right. Please help
I have a service that need to be signed with the
priviliged certs in order to auto-start when the device boots up.
All is fine for WM5 so I know the registry entries are ok.
worked in MOTOQ smart_WM6 and QTEK ppc_wm5 but don't in touch and touch dual and M700 (gloffish) PPC_wm6 recinving erro code 2 ("ERROR_FILE_NOT_FOUND"?), does anyone have a clue of why this happens?
Just wondering if you figured this out. I now have the same problem and if someone has an answer I would really appreciate it. Everything worked fine under windows mobile 5, now under six the service will not start.
What kind of auto-service? Can you not put it in \windows\startup ? If it wont start by running it then you're probably running 6.1 and are SOL until they update the file you need.