How to autostart service on WM6? - Upgrading, Modifying and Unlocking

I have a service that need to be signed with the
priviliged certs in order to auto-start when the device boots up.
All is fine for WM5 so I know the registry entries are ok.

worked in MOTOQ smart_WM6 and QTEK ppc_wm5 but don't in touch and touch dual and M700 (gloffish) PPC_wm6 recinving erro code 2 ("ERROR_FILE_NOT_FOUND"?), does anyone have a clue of why this happens?

Just wondering if you figured this out. I now have the same problem and if someone has an answer I would really appreciate it. Everything worked fine under windows mobile 5, now under six the service will not start.

What kind of auto-service? Can you not put it in \windows\startup ? If it wont start by running it then you're probably running 6.1 and are SOL until they update the file you need.

Related

WM 2003 SE Error Message upon soft reset

Anyone have any idea how to remove the following message after I soft reboot? not located in startup so must be in registry...the command to want to start it must be in registry.... message is "connections.exe.....cannot find connections, etc..." thanks much!
Help!
Can someone help me please. thanks you!!!
can anybody help me please?
it must be an easy fix but I can't find it!
Is there any chance that connections.exe is on your SD card?
Anybody have anymore suggestions?
No it is not on the SD card. Upon booting I get the error message and say ok and the ppc boots up....is there any registry location i can check that may have some reference to connections.exe...can't figurure out why it is trying to launch it. thanks
Anybody have anymore suggestions?
No it is not on the SD card. Upon booting I get the error message and say ok and the ppc boots up....is there any registry location i can check that may have some reference to connections.exe...can't figurure out why it is trying to launch it. thanks
T Mobile MDA Compact does not open, need HELP!!!
Hello everyone,
I'm new to this board and I read nearly all threads about MDA. I bought my T Mobile MDA Compact 2 weeks ago from Germany. Yesterday while I was trying to change its language to English its locked. I installed Windows 2003 SE then device restarted but not open anymore. Now I can not open it. What should I do? I need immediate assistant, can anybody help me to make my MDA Compact working again?
Thanks
AE

Can't Install Software on XDA IIs

I'm posting this on behalf of a friend.
He's got an XDA IIs with no mods/upgrades done, and has Activesync installed (whichever version cam with the device). When connected he can sync and browse the device but can't install any software. Every time the install program tries to communicate with the device a window appears (tall thin window) then disappears immediately with no error.
This happens with everything he tries to install. We've tried removing and re-instaling activesync but it's made no difference.
Does anyone have any ideas what it could be?
Cheers,
Matt
Have you tried creating a new partnership with the device through activesync and hardresetting the device?
Does re-installing Activesync not create a new partnership anyway?
I think he's a bit dubious about hard-resetting it, but I'll mention it.
Could it be anything else?
I have this problem too. MDA III with imate 1.40rom and 1.12 radio. Reinstalled activesync and even reflashed rom but the add/remove window just flashes on screen for a second then disappears. I hope someone here knows how to fix this. I'ts been driving me nuts!
sorry but......bump!
Could it be Firewall problem?! Get off Internet connection, disable Firewall and connect...
Good luck (just saw the light today having simular problem)
Grtzz
Canaan said:
I have this problem too. MDA III with imate 1.40rom and 1.12 radio. Reinstalled activesync and even reflashed rom but the add/remove window just flashes on screen for a second then disappears. I hope someone here knows how to fix this. I'ts been driving me nuts!
Click to expand...
Click to collapse
ooh I have same problem the Programs wont get removed is just says ( the program is not completly removed) and the program wont get deleted????
any ideas???
Cab files!?
What about installing the programs by putting the *.cab files directly onto the BA and running them there?
Most installers will install the cabs to the Microsoft Activesync/App name, or Program Files/App Name folder if there is no PDA connected - ready to try installing next time! Just copy them and put them on manually.
Or you could try Universal Extractor to open the *.exe's and get to the cabs.
Not a solution, as such, I know but, it at least gets your apps onto the BA in question until you find the solution!!
Bird

TomTom on WM 6

Hi Guys,
Has anyone got TomTom 6 working with WM6?
My TomTom Home on my PC is telling me that my device is incompatible
Cheers.
Works fine for me.
Im using Tomtom v.6.0 on my TyTN, and it runs like a charm.
WM6, tt 6.03 And tthome working sweet as
You might need to kill active sync to persuade tth to see the device again, oh and make sure you have latest version of tthome, not at pc right now so I havent a clue what it is
TTv6.0 works fine for me too in my Trinity
Same here, no issues
same here no problems with tt 6.03 and ax3l wm6 rom
I had a problem with TomTom after installing WM6. TomTom home kept saying that it didn't recognize my Trinity as a TomTom device. It took a few reboots of my PC and it finally agreed to let me reinstall TomTom.
I have been trying to install TomTom on my Trinity too. I am using WM6 too and it says the cab installation was unsuccessful.
I don't know why, it finds my device perfectly and installs the cab but I get the same message everytime.
Edit: DarkJedi is the f'ing man! He told me to copy the cab to my storage card and run it from there and it worked.
Thanks Matterhorn. That sounds like the issue I have. I'll give that a go.
Cheers all.
Be careful which WM6 ROM you use- some of them change the Device Code, preventing TomTom activation, and if that happens, and you have used your spare activation on TTCode.com, you will need to persuade TomTom to issue a new code, which can take up to 2 week's , and needs a copy of the origiinal proof of purchase for the device.
Another problem is that if you have to follow that route, although you can revert the OS to a previously activated one if you find WM6 not to your liking, TomTom Home cannot be reverted, and you won't be able to use it.
I'm using the Mun-Rus TE ROM, and it doesn't change the Device Code, but another WM6 Test ROM I used did change the code.
Works fine on my Trinity only when .NET 2.0 was missing there where some bugs.
If the activation lags there are some workarounds on the NET
TOMTOM 6 WM6 installation problem
I have exactly the same problem with the same error message....
Does anybody have an idea?
How can I check if GPS is enabled ?
Thanks.
Hello,
I've got a problem with Tomtom since one week. It turns off without reason, after some minutes. And when I restart it, it had lost my destination... So strange, isn't it ?
Anybody with the same problem ?
Thanks in advance.
Mister K, french user of SPV M700.
where can I get the cab-file?
maevro said:
I have been trying to install TomTom on my Trinity too. I am using WM6 too and it says the cab installation was unsuccessful.
I don't know why, it finds my device perfectly and installs the cab but I get the same message everytime.
Edit: DarkJedi is the f'ing man! He told me to copy the cab to my storage card and run it from there and it worked.
Click to expand...
Click to collapse
Where do I get the cab-file?
Michael

Does WM6 have VB runtime? Needed for some applications!

HI,
I am trying to run this GPS application called GPS DIS 'GPS Driver Information Service and works with all PDAs running Pocket PC 2002 or higher
GPS DIS was developed for PocketPC 2002. With PocketPC 2003 you will have to install the appropriate VB runtime files.
I have loaded the VB Runtime files onto my P3600i as well as the GPS DIS. The install completes fully, and when i launch the application, i see the spinning microsoft icon indicating its loading then it disappears then returns then disappears again. (It does not lock up)
Then nothing actually loads.
Can someone help, possibly try to load this and let me know if they get a different response.
Does anyone know if VB runtime is included in WM6? If not, which is the best one to install into WM6?
thanks
polite bump,
surely some experts can shed some light on this.
bump bump.
I am also looking to find a vb runtime module for wm6.
pls, any one have any ideas how to achieve this.
As far as I Know there isn't anyone VB Runtime for WM6. Microsoft doesn't support it anymore. I also needed it...
PS: found a way to install it: Install in main memory or internal storage, not in SD. See: http://www.cebeans.com/runtime/runtime.htm
Hi Bicalho,
Can you tell me if GPS application called GPS DIS 'GPS Driver Information Service will run with your method?
Thanks!
GLO said:
HI,
I am trying to run this GPS application called GPS DIS 'GPS Driver Information Service and works with all PDAs running Pocket PC 2002 or higher
GPS DIS was developed for PocketPC 2002. With PocketPC 2003 you will have to install the appropriate VB runtime files.
I have loaded the VB Runtime files onto my P3600i as well as the GPS DIS. The install completes fully, and when i launch the application, i see the spinning microsoft icon indicating its loading then it disappears then returns then disappears again. (It does not lock up)
Then nothing actually loads.
Can someone help, possibly try to load this and let me know if they get a different response.
Click to expand...
Click to collapse
Download it from here http://msdn.microsoft.com/mobility/windowsmobile/downloads/evb_eula.aspx and install in Device memory...it should work.
I tried this again with some hope, but again, both apps GPSDIS and VBruntime install successfully and when launching GPSDIS i get the ' you have X times remaining for this trial' then that disappears and the spinning beach ball returns for a couple of seconds then dissapears and nothing.
The search continues...
any new ideas please

[Q] HTC Dash - WiFi option missing post WM 6.1 upgrade in comm mgr

I have upgraded my Tmobile dash from WM 6 to Kavana WM6.1
File: RUU_Excalibur_WM61_Kavana_080408_WWE.exe
All the setup was completed and it worked great with all the instructions. However, when I went inside the communication manager, to turn on WIFi, the communication mgr does NOT show the WiFi option at all.
Not sure if I did anything wrong.
Can anyone let me know what would be the fix to get WiFi option in communication manager?
Could not find any solution in earlier threads here. NEED URGENT HELP !!!
Thanks, Yogesh
reboot the phone again or do a hard reset. Please post in the rom thread.
On that note, theread closed.

Categories

Resources