Develop Bugs

Upgrading m5000 ROM to JASJAR_WWE_11353_137_10301.exe

I'm attempting to install iMate JasJar ROM on my SPV M5000 as detailed in the sticky topic "EXEC SUMMARY: TIPS n TRICKS to make your JasJar run well" in the Universal forum.
So far, it hasn't worked
Here's what I'm doing:
1) Downloaded https://www.clubimate.com/support/JASJAR/ROM/JASJAR_WWE_11353_137_10301.zip
2) Sync then reset the M5000
3) Left it plugged in, ran the JASJAR_WWE_11353_137_10301.exe
4) Click next, then it is "checking the information on your device"...
5) Then it says "Error 101: Connection Error" and have to exit.
I have tried this over and over, and on another PC with AS4.1 installed. Keep getting this error.
Any ideas?

off AS4.1
You have to try do not syncronize with AS,so, just click in setting conection in AS y keept disable conect with usb and COM.

Yeh, I've tried turning off connection options in ActiveSync. The little red cross shows on my tray icon, but getting "Error 101 Connection Error".
I've also had Error 120: Country ID Error.
I have tried running the update in bootloader mode. Still doesn't work so I reset out of that.
Thanks in advance!
Mat

You have to use MaUpgradeUt_NoID.exe to bypass the country error, since you're going from one manufacturer's ROM to another.

Hi there
Thanks for the advice... I tried downloading, unzipping, copying to PPC and installing MaUpgradeUt_noID.exe. It just gives error "This is not a valid PPC application" when you double-click it in the PPC file explorer.
Any ideas? Is this the right version of the file? Am I missing something?

No no u dont put the MayaNOID.exe on your ppc...
look in the folder of the jasjar rom you should see an executable romupgutt.exe (the only executable in the folder with a picture), simply copy the NO Id .exe into the rom folder and delete the rom upgrade utility executable thats already there.
Connect your M5000 via usb, kill activesync then launch the No ID upgrader. If it fails the first time, running it a second time usually does the trick

After you have applied the imate rom, is it possible to run all of the Orange cab files to re-apply the proper connection settings?

captainsensible2002 said:
After you have applied the imate rom, is it possible to run all of the Orange cab files to re-apply the proper connection settings?
Click to expand...
Click to collapse
Just unlocked my ext_ROM using buzz's unlocker. Have copied the orange CAB files to desktop PC and will attempt to run them after rom upgrade. Will let you know how it went.

MurphmanL said:
No no u dont put the MayaNOID.exe on your ppc...
look in the folder of the jasjar rom you should see an executable romupgutt.exe (the only executable in the folder with a picture), simply copy the NO Id .exe into the rom folder and delete the rom upgrade utility executable thats already there.
Connect your M5000 via usb, kill activesync then launch the No ID upgrader. If it fails the first time, running it a second time usually does the trick
Click to expand...
Click to collapse
The JasJar rom I have is just a single executable to run on the desktop PC. There's no folder... should there be?

Maybe I don't have the right files?
I have
JASJAR_WWE_11353_137_10301.exe
ROMUpgradeUt.exe (downloaded randomly from somewhere)
MaUpgradeUt_noID.exe (downloaded from forum.xda-developers.com)
But yeh - the latter two ask for RUU.dll when I run them on the PC.
Should I have a folder full of other files, where do I get them?

The RUU.dll file is inside the JASJAR...exe file. Right-click on the executable and extract it to a folder using WinRAR or WinZip that is installed on your PC. Then, you can copy the MaUpgradeUt_NoID.exe to that folder and run it.

BeyondtheTech said:
The RUU.dll file is inside the JASJAR...exe file. Right-click on the executable and extract it to a folder using WinRAR or WinZip that is installed on your PC. Then, you can copy the MaUpgradeUt_NoID.exe to that folder and run it.
Click to expand...
Click to collapse
Hey BTT! Thanks for the advice.
Haha - I tried using Winzip and WinRar to extract the archive (it's self-executable right?)
Anyway - didn't work (error was that it could not be recognised by the app). So used filemon to determine what it was writing to and found it under docs and settings\username\local settings\temp.

Sorry I'm being a complete lamer. Just very scared I'm going to end up with brick!
So, I now have this screen. It shows a Magician! Can I use it for my Universal?
Why doesn't it have the update version information??! I'm scared!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

That's how far I got too and was equally scared! No doubt someone will convince us its quite safe! I will let you go first though...

Good - glad to know I'm not alone!
Anyway - anyone who's done this before - please come forward and confirm it's all going to be ok!
Thanks!

Bump!
ANYONE who has done a ROM upgrade before - please confirm that the screen I see above is okay for a Universal upgrade!
Don't mean to sound pushy - I really do appreciate all your help!

hi
can anyone with english m5000 post the rom on the ftp (if you cant dump the rom then maybe you can get it from the orange werbsite if its there)
and why do you want to put imate or other roms on your spv...are there any bugs? thanks

zohaer21 said:
hi
can anyone with english m5000 post the rom on the ftp (if you cant dump the rom then maybe you can get it from the orange werbsite if its there)
and why do you want to put imate or other roms on your spv...are there any bugs? thanks
Click to expand...
Click to collapse
As far as I know, I don't think the ROM can be dumped. Nor have Orange released a ROM update and so it's not available anywhere!
Reason I want to put iMate ROM on is to test if there are any performance gains to be made. People seem to recommend updating to iMate ROM. Either way it's an experiment.
BUT - I'm still loathed to go through the process .... can someone who's done it post and confirm that it's ok to use the Magician update wizard AND that it's ok that the version info isn't shown in the update screen (see above)?
Thanks in advance.
Mat

i tried it on my spv m5000 using the files listed above. got past the magician screen. didn't work. just said that the rom didnt suit the machine because its from a different country. then the program ended.
still, I have recently been reading that the qtek rom is the one to go for.

here's the picture

I Have screwed my MDA!

I bought a MDA2 off ebay and it said in the ad it had WM2005 on it, i figured it was a typo so i went ahead and bought it. ANyway i got the MDA and it has WM2005! The main reason i bought it was to run tomtom navigator 5, now i managed to install it but the backlight refuses to work. I just want to know where i can download the original rom from as i dont want WM2005 because its not designed for the phone....
Tried to be clever and i downloaded a rom from the o2 website and tried to reflash the phone with that rom, it came up with some error message and it totally crapped out my mda. My mda is now on a dark screen that says serial v1.02 and when i put it in the cradle it changes to USB v1.02. Tried running different roms but its not accepting any. Activesync is not picking the device up anymore...
can anyone help?

OK so you want an official rom?
1) What is the HTC anme for an MDA2?
2) What carrier are you currently on?

i dont mind what rom it is...as long as it works. Carrier? I am on the o2 network if that helps. HTC anme? I have no idea what that means. If you could tell me how i can get this info for you i will

oh crap, spelling mistake on my end, i meant HTC name
also i forgot, what country are you using the phone in?

Well its a T-Mobile MDA (what it says on the device itself but i beleive its the same as an XDA2). I am in England and i am on the o2 network.
looks exactly like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Do you mind having a non-official rom?

I dont mind at all, anything that makes it work.

ok, try hard resetting your phone, it should boot back into WM5, you will then need to download a wm2003 rom (check the WIKI for options and choose one) and install that (again the wiki should hold all the information you need)
( i didnt tell you this in the first place because i was looking to find an official o2 uk rom, however you need to give them your imei, and o2 phone number to do that, somthing i dont have )

Midget_1990 said:
ok, try hard resetting your phone, it should boot back into WM5, you will then need to download a wm2003 rom (check the WIKI for options and choose one) and install that (again the wiki should hold all the information you need)
( i didnt tell you this in the first place because i was looking to find an official o2 uk rom, however you need to give them your imei, and o2 phone number to do that, somthing i dont have )
Click to expand...
Click to collapse
Ok firstly, hard reset (holding power whilst placing stylus in reset hole) is the first thing i tried, its not having non of it. Just shows USB v1.02. I was able to download the rom from the o2 website by giving my IMEI of this tmobile phone (how? i dont know). There was an error durin the installation which caused my mda to crap out. Its not going past that screen at all.

during the install? as in while it was actually copying the rom?

yup m8, as it was getting transferred over

k, this hapened to me earlier todday as it happens (i was testing ivans new rom)
the reason it was caused is that the operator ID is set wrong, to fix this follow these instructions:
go to "c:\documents and settings\your_username\local settings\temp" and delete everything there.
run the origional o2 upgrade DONT PRESS NEXT OR ANYTHING, JUST START IT.
go back to "c:\documents and settings\your_username\local settings\temp"
there should be a new folder created, copy this to a tempory location.
extract the contents of this attached zip file into that copied directory.
double click on setoperator.bat
run the HimaUpgradeUt.exe in that folder to put your phone back to the wm2003 os.
if this doesn't work then i'm stumped, sorry

when i run the o2 upgrade it just shows a plf183.tmp file, no folders... ill try afew more things

ok this is what i am getting...
http://www.killerinstinct.pwp.blueyonder.co.uk/xdaerror.jpg

ok maybe the password was wrong for the file
does anyone know what version of himaupgradeut the latest o2 uk update uses? then i can get the right password

i dont mind using any ROM as long as its WM2003

try the same method as above, but with these files:

KS20 lost IMEI: How can i repair IMEI -> NV-backup ???

hello.
i have flash my ks20 - sfr to german rom vodafone branded ( 10e ).
all okay ! and thank you for your help an solution !
but my problem yet......
i have flash the rom 10a unbranded - german to my ks20.....
and i have forgot to backup .nv2-file
the rom is working but the phone have no IMEI..... phone not work.
how can i repair the nv2 file and how can i tell the phone --> your IMEI is 34565......... ???
i think, when i have a nv backup from another one ks20, i can edit the imei and flash to phone and all is good ????
pls help me !
thanx

why nobody can help me `?`??
why nobody can send me his nv backup fpr ks20 ????

People puke up "its illegal, immoral and illegal".
Legit or not, nobody will help.

polar box ımei repairr
link here
http://forum.gsmhosting.com/vbb/showthread.php?t=507717

use QPST 2.7 build 264

any one can help
how tu use qpst to repaire KS20 NV, imei and network ?????

Found on another forum:
Take a recent version of QPST - > qpst-2.7build264
Then, having configured the port, normally the telephone is detected in SURF7200 and the version of your rom...
It is necessary to launch the ServiceProg.exe program in the file of QPST (or in the menu of qpst which turns).
In the first tab NAS, to make one " read from phone " and your imei appears in TAP FACULTY and SNR!!!
( Finally your bungled imei lol).
It is necessary to put ONLY 14 figures of your imei, 15 eme is calculated by the alone telephone!!
It is necessary to put l imei of this way: 6 code TAP + 2 code FAC + 6 code IN SNR...
To make a write to phone, to wait for little and normally it is good
@+

rickou26 said:
Found on another forum:
Take a recent version of QPST - > qpst-2.7build264
Then, having configured the port, normally the telephone is detected in SURF7200 and the version of your rom...
It is necessary to launch the ServiceProg.exe program in the file of QPST (or in the menu of qpst which turns).
In the first tab NAS, to make one " read from phone " and your imei appears in TAP FACULTY and SNR!!!
( Finally your bungled imei lol).
It is necessary to put ONLY 14 figures of your imei, 15 eme is calculated by the alone telephone!!
It is necessary to put l imei of this way: 6 code TAP + 2 code FAC + 6 code IN SNR...
To make a write to phone, to wait for little and normally it is good
@+
Click to expand...
Click to collapse
Download: http://depositfiles.com/en/files/4734215

rickou26 said:
Found on another forum:
Take a recent version of QPST - > qpst-2.7build264
Then, having configured the port, normally the telephone is detected in SURF7200 and the version of your rom...
It is necessary to launch the ServiceProg.exe program in the file of QPST (or in the menu of qpst which turns).
In the first tab NAS, to make one " read from phone " and your imei appears in TAP FACULTY and SNR!!!
( Finally your bungled imei lol).
It is necessary to put ONLY 14 figures of your imei, 15 eme is calculated by the alone telephone!!
It is necessary to put l imei of this way: 6 code TAP + 2 code FAC + 6 code IN SNR...
To make a write to phone, to wait for little and normally it is good
@+
Click to expand...
Click to collapse
After click read from phone i see nothing where can i find IMEI code??? Pls help
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

and after i try to press write to phone, after few secound phone restart and software show as picture below

thanks
but now i restore the imei
first problem
original imei 357323 01 065437 9
restored imei 357323 01 065437 0
last digit calculated is false
second problem
i don't have a network in phone
can u help me ?????

You should not put your imei in the forum.
Just one question, why did you not copy the imei from the phone sticker? Normally all phones have the imei on the sticker, and then you just would need to fill up the information.
Strange... very strange..

To everyone,
If u need .nv2 file, pm me with ur imei no. and email address, i can generate one for you, but the last digit, which is calculated by your phone, would likely to be different and also i can only generate branded .nv2 since i only got branded .nv2 file. It could be work in unbranded phone but just u need to flash a branded rom or hybrid rom to use with it.

it works 100% my phone back to life again.maybe some with an unbranded device do the same.thanks raykisi.

raykisi said:
To everyone,
If u need .nv2 file, pm me with ur imei no. and email address, i can generate one for you, but the last digit, which is calculated by your phone, would likely to be different and also i can only generate branded .nv2 since i only got branded .nv2 file. It could be work in unbranded phone but just u need to flash a branded rom or hybrid rom to use with it.
Click to expand...
Click to collapse
imei: 357323-01-500868-8
lgks20. can u help me pls with Nv back up..
this my email. [email protected]

SIM-Unlocking ACER S200

Hi,
I just bought an Acer S200 that seems to be very good. It's locked on SFR network and I want to sim-unlock it. As this PDA is really recent, no way seems to be ok to do this. Is there anyone who can help me ?
thanks !

up ! Just to have any help if possible...

I have the same problem. Did you find a solution yet.

i also want to buy this model

Hi,
not yet a solution ... I'm still waiting and looking for...

Guys the acer s200 comes unlock from the factory, it hasnt been subsidized by any carrier so theres is no way to get a carrier lock acer s200.

If that was true I would clime into the monitor and hug you.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Is this not a sim lock.

As a matter of fact, I've got the same message of "SFR SIM LOCK" as you IllicitTweakin.
I just receive today my unlock code but the screen "SIM LOCK" does not allow any keyboarding (keyboard seems to be inactive, only "Cancel" is allowed) !
No solution at the moment...

gigilev said:
As a matter of fact, I've got the same message of "SFR SIM LOCK" as you IllicitTweakin.
I just receive today my unlock code but the screen "SIM LOCK" does not allow any keyboarding (keyboard seems to be inactive, only "Cancel" is allowed) !
No solution at the moment...
Click to expand...
Click to collapse
the same probleme any solution !!!

I found a solution, with a little mystery ... :
I first installed the last ROM ACER 2.003.00 FR (uploadable on Acer'site) and my SIM wasn't yet usable.
I launch the SIMLOCK program in the folder \programfiles\SIMLOCK, nothing happened. I try to reboot the smartphone, the SIM card was ok !
Hope this experience could help !
Bye

gigilev said:
I found a solution, with a little mystery ... :
I first installed the last ROM ACER 2.003.00 FR (uploadable on Acer'site) and my SIM wasn't yet usable.
I launch the SIMLOCK program in the folder \programfiles\SIMLOCK, nothing happened. I try to reboot the smartphone, the SIM card was ok !
Hope this experience could help !
Bye
Click to expand...
Click to collapse
hello, do you mean you have unlock it by this method? can you show us al the procedure?
br

Hi,
I confirm that the sim unlock of the ACER-S200 was made with 3 steps :
1-update with the official ACER ROM (2.003.00FR in my case)
2-execute the file \Program files\SIMLOCK\SIMLOCK.EXE
3-reboot to validate : it's ok !
I did it again this morning for a second ACER and it works fine.
bye

gigilev said:
Hi,
I confirm that the sim unlock of the ACER-S200 was made with 3 steps :
1-update with the official ACER ROM (2.003.00FR in my case)
2-execute the file \Program files\SIMLOCK\SIMLOCK.EXE
3-reboot to validate : it's ok !
I did it again this morning for a second ACER and it works fine.
bye
Click to expand...
Click to collapse
wel thanks u so much! i id it like u said, network barrs and operator name came for 10 second, then the message (no service came)
is there anything else sould i do? also when i execute the simlock.exe in programe files, nothing happen!!!

first i tryed with EUU_Acer_S200_2.003.00_FR_02.03.00_2.003.01-20091109, then the software said that my phone is sfr, then i tryed with EUU_Acer_S200_2.003.01_FR_SFR_02.03.00_2.003.01-20091109, upgrade is done sucsesfully, i fo to programefiles/SIMLOCK_SFR.exe, then nothing happen!! how to execute it???
br

here is what i get with fr rom, i can upgrade onely with sfr fr rom!!!
what's wrong with my phone exactly!

well! thank you so much good man, after hard reset my phone, i sucsseed to unlock it!!
onely one thing, i have to execute the simlock_sfr.exe if i power off/on the phone, is it the same thing with you?
br

Hi Bono,
You cannot upgrade your ROM with ACER's ROM because your phone is locked on SFR ROM by a register key : to avoid this, first download a freeware as "PHM regedit" and install it on your phone. Then, go to HKLM/ControlPanel/ACER/SystemInfo/Software and modify the key "Language" from FR_SFR to FR and close the software.
You can now use your activesync to launch the ACER ROM 2.003.00 and it will be ok.
Let's have a try, I think Acer's ROM is better as SFR's ROM (my opinion only ! ).
bye !

gigilev said:
Hi Bono,
You cannot upgrade your ROM with ACER's ROM because your phone is locked on SFR ROM by a register key : to avoid this, first download a freeware as "PHM regedit" and install it on your phone. Then, go to HKLM/ControlPanel/ACER/SystemInfo/Software and modify the key "Language" from FR_SFR to FR and close the software.
You can now use your activesync to launch the ACER ROM 2.003.00 and it will be ok.
Let's have a try, I think Acer's ROM is better as SFR's ROM (my opinion only ! ).
bye !
Click to expand...
Click to collapse
Hi gigilev,
yes that's why i got this error, so what i could do , i upgrade with sfr rom like i said, now the phone is unlocked, but every time i power off then power on the phone, the phone is locked again, all i have to do is to execute silock_sfr.exe from programefiles/simlock, and it's unlocked again.
in your case, is it the same thing?
again thanks gigilev

I confirm I haven't got your problem. I just made a try and after a reboot, my SIM is still ok. I think you should make the last steps I gave you to install the original ACER's ROM and finally use the \Program files\SIMLOCK\SIMLOCK.EXE.
Let me now if it's ok !
good luck ;+)

ok, but now i think that i will downgrade it
my phone now has 2.003.01, as i upgrade it with EUU_Acer_S200_2.003.01_FR_SFR_02.03.00_2.003.01-20091109
can i flash now with the acer rom EUU_Acer_S200_2.003.00_FR_02.03.00_2.003.01-20091109 that has 2.003.00
will downgrade damage the phone?

[SOLVED] NOTE II Network problem after the update Problem- solved !!!

Please read be careful because of as responsıbılıty on you.
Hi all.
ı'm ıbrahım from gazıantep – turkey.ı m 25 years old.ı have experınce and knowladge on pc & telephone hardware , software ımage & securıty.
-CHANGED IMEI,NETWORK PROBLEM AFTER THE UPDATE AND SN 0000... PROBLEM- SOLVED !!!
ıf the ımeı changed of machıne even return orıgınal ımeı you can see problem.because of the machıne sn number had been broken.
this is the first time on the world. that transactıon made from me. and the ınventor ıs from turkey agaın (patch transactıon).
before all else the phones efs fıle had been broken .ıt reads from efs memblock. when ıt done patch operatıon code of network past to modem.when you update your network will be gone.what can we do on thıs case ?
Ofline patch
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Online ota update patch
LINK : Patch download
NOTE II and Galaxy SIII Patch
Two language English and Turkish
Patch Download My application and install on your phone after click apply patch or If you have internet wait for orientation the patch online..And apply my patch
Change Log ;
v1.0 >> V1.1 note II corrected offline mode
My S3 post = http://forum.xda-developers.com/showthread.php?p=32338426
warning : If your imei number like 0000**** 0049*** my patch wont work ! This solution is just for who has a Changed SN and No Network After The Update !
People who have already read this topic or used my patch please leave a comment.. Your comments are very important for others who wants to use this patch.. Also very important to be current for the new updates..
ıf you bored from Note II.there ıs good news ıts survıve.
ı have already tried this solution many phones and all of them works !!!
Q: This patch is gonna clone my phone ?
A: No,it's gonna bring your network back.
Q: My imei number like 0000**** or 0049**** if i flash this patch it will work or it will bring my original imei number back ?
A: This patch is not about your EFS Folder it is just about network so it won't fix your imei number or bring your original imei number back.
Q: I will do these 2 ways step by step ? Do i have to flash offical firmware first and then flash custum rom ?
A: No,you can choose one of them this is your decision.
Q: Can this patch fix my SN ?
A: No it can't but it doesn't matter because you will always be current.
Q: How can i use it on stock rom ?
A: First change your kernel with CF-Root and follow the steps.
Q: After this operation i will update my phone ? Is it a certain solution ?
A: No after the each update you should flash my patch.
If you like my hard working project consider a donation.
DONATE​
USD USD DONATE
TL TL DONATE
EURO EURO DONATE​

My New Year's gift Happy Holidays

v1.0 >> V1.1 note II corrected offline mode

doesnt worked for me....

yours may be a hardware problem...

now null/null !!
I used it on my Note 2, which had "no network" problems. IMEI was displaying correctly.
After applying the patch, I get IMEI null/null !!!!
How can I fix this?
:crying:

ghostwheel said:
I used it on my Note 2, which had "no network" problems. IMEI was displaying correctly.
After applying the patch, I get IMEI null/null !!!!
How can I fix this?
:crying:
Click to expand...
Click to collapse
OK, reflashing the rom seems to restore the IMEI to non-null/null. But I still have the original problem that I was trying to solve (no service)
Should I start with any particular rom flashed?

ghostwheel said:
OK, reflashing the rom seems to restore the IMEI to non-null/null. But I still have the original problem that I was trying to solve (no service)
Should I start with any particular rom flashed?
Click to expand...
Click to collapse
OK, finally fixed!! I flashed a stock rom with odin (N7100XXDMC3_N7100ODDDMD1_INU ), and after that the patch did what it is supposed to.
Thanks!
:good: