When I click "Phone" it shows the Notification bar on the top, then my service provider (3G T-Mobile NL) along with an arrow pointing left, 3 of my last calls, 1/4 of my first speed dial number and finally the number pad - numbers 7, 8 and 9 are cut off level with the letters by a block of the wall paper background and the TF3D bar on the bottom.
If I minimize the dial pad, I see the last 3 out going calls and first 3 numbers of my speed dial.
When I am in a call, the bottom half of the TF3D screen cuts off everything else - end call, speaker on / off, etc.
How can I fix this?
Related
Hello guys,
Is there a way to change the amount of rings before the incomming call
is diverted to voicemail or whatever?
My XDAlls only rings about 3 or 4 times, i never have time to get the phone from my pocket or from another room before i loose the chance to awnser.
Another small question,
i use a 02 pay as you go sim, and after any call (out going) i get a cool pop-up displaying the remaining call credit.
the pop-up is a few seconds after a call has finished but the problem is this allways switches the XDAlls back to the phone screen.
Is there a way to fix this?
On your first question, the answer is yes (or most probably, depending on your operator).
You can find GSM codes on the internet somewhere. They're usually in the format of *#something#.
Waaaaaay back , before phones had cool things like menus and screens with more than one line, you had to type these things in yourself to set things like voicemail, forwarding, and so on...
On your second question, I doubt it's possible, but can't be sure.
divert after x unanswered rings: **61*phone number you divert to**2#yes
Sorry this should be:
divert after x unanswered rings: **61*phone number you divert to**2x#yes
Extend Ring Tone Duratiion
Extending Ring Tone Duration
To extend your ring tone, dial the following code:
** 61* YOUR prefix 5 your 7 digit number ** 30# and send. E.g. **61*086 5 1234567**30#
You can extend your ring tone for 5, 10, 20 and 30 seconds. The last number in the code above dictates ring time. In the example above, 30 was used as an example.
Lots of GSM service codes, including the one mentioned above, are documented here.
Steps:
1. find ur voicemail number (not ur mob number)!
2. so suppose ur voicemail no is: +447743888888, then
3. on the XDA fone scree, type in: **61*447743888888**30#
(the **30# at the end will set it to a 30seconds delay b4 it goes to ur voicemail)
4. click send/talk
5. wait for a few seconds
6. DONE!
Hello guys, I would like to hear from You if you have similar problems in 1.13 version as I have in 1.11 test rom, any answer will help me with the upgrade decision:
- “contact” soft key is on the RIGHT when desktop is visible, on the LEFT in phone application and in the MIDDLE button during the phone call. JUST Imagine somebody in the car who wants to make a phone call….. especially with MISSING REAL HARDWARE BUTTONS to assign the contacts to…
- In the phone application – last unanswered phone call is not displayed on the phone screen – you have to click HISTORY to see it – just the same problem in the car – somebody is calling you, you can not get out the device on time, so you press twice TINY TINY green button on the hinge, and …. You call the last number you have called before…not the last missed one
- Phone application just shuts itself of and Universal comes to the desktop screen WHY? (Imagine AGAIN in the car….)
- REALLY ugly TMobile skin, but the original blue skin has to low contrast….Again IN THE CAR…
- maybe I did not try hard enough but I can not obtain predictable results with the onscreen quickdial (not to mismatch with SPEED DIAL butto which Is OK, )– how to obtain the names starting with second or third letter from the key – I don’t know, and anyway it does not work if you have about 1500 contacts as I have
- check how SPEED DIAL it was done in the old handspring TREO phones – large buttons with the names on them in two columns rather than one list, with whole screen “pages” of 12 contacts each, for me much easier to use and navigate if you have more than one screen of numbers as in the car there is no chances for easy up and down navigation, what you have to do now with the numbered list.
- With all this missing hardware buttons what happened with the D-Pad functionality – in Blue Angel it was UP- History DOWN – speed dial … but in Universal nothing works ?????
- “during the call” screen with 6 soft buttons stays on when the phone call is already finished – again you do not find the soft buttons in the right places when you want to make next call
- When I got rid of the TM skin video call button is missing, I can not use UMTS yet as it is not available in Krakow, but it will be needed some time…
- No BT icon on the desktop – no chances for the quick verification of the proper connection between headset and the unit
- I have heard that voice dialing functionality does not work when the unit is closed (I always keep it open – screen on the top)
- There is no voice dialing available when the unit is protected by the password (but this is disputable)
idk if anyone can help i own a tilt 2 my keyboard is fine and everything but the only problem i have is when i dial a number to call, the numbers are not where there supposed to be on da keyboard instead of being in the middle there across the top like the 1 starts where the "at" symbol is at the top does anyone know how to fix that
Hi,
I'm having trouble setting up some pop up icons using [ox] to displace the icons.
What I'm trying to achieve are notifcation buttons which stack to one side of the screen. I want notifications for missed calls, SMS and whatsapp.
Calls will always be far right so I have a that set up with an x conditional when I have a missed call and it shifts off the screen when there are none.
The SMS notification is either off the screen, in the middle or on the far right (in place of the missed call icon). This works fine because I have it set up for either 1000:a resultant variable with b being the usual x coordinate if nothing is triggered.
My issue is the whatsapp icon which is always meant to be on the left side, relative to the SMS and missed call icons.
I have tried multiple line parameters but it ends up not using any of the conditionals at all.
So what I want is:
If I only have a whatsapp notifcation, it appears on the far right.
If I have a whatsapp notifcation and either a SMS OR a missed call then it appears in the middle.
If I have a whatsapp notifcation and BOTH SMS and missed calls, it will appear on the left.
How could I set this up?
Hi! Since my Note 4's Lollipop update last week, I am very frustrated with what the dialer does during outgoing calls (not using HD calling right now). After I make the call, the call screen disappears into the notification bar and I have to swipe down (being careful not to touch the sensors that make the screen go black) to get the dialer back on the screen. This is really a pain when I need the keypad. I really just want the dial screen to stay on the screen full size. I can't seem to figure out how to do this after much Googling (maybe because people don't think it's a problem...but it's a very annoying problem for me!). Any ideas on how to fix this? Many thanks! Amanda PS...Incoming calls are fine...dial screen stays full size on the screen.
Welcome to the lollipop group! I am using sip accounts and when I dial, the dialer asks me whether I want to use my phone operator or one of the sip accounts. After I choose I have no dialer left.
If i swipe back to the dialer tab in the phone application, I can see 3 options:
x use touch tone keypad
< return to call screen
+ add call
and if i select "return to call screen" i can see again the dialog that asks me which phone to use for the outgoing call (while i'm still calling or even talking with the other side)
Google don't care about this, they're probably looking to phase out "internet calling" since they have their own competing product now (hangouts).
foxx1337 said:
Welcome to the lollipop group! I am using sip accounts and when I dial, the dialer asks me whether I want to use my phone operator or one of the sip accounts. After I choose I have no dialer left.
If i swipe back to the dialer tab in the phone application, I can see 3 options:
x use touch tone keypad
< return to call screen
+ add call
and if i select "return to call screen" i can see again the dialog that asks me which phone to use for the outgoing call (while i'm still calling or even talking with the other side)
Google don't care about this, they're probably looking to phase out "internet calling" since they have their own competing product now (hangouts).
Click to expand...
Click to collapse
I'm having exactly the same issue on a Note 3 now with Lollipop.